An #ifdef CONFIG_PPC_FPU_REGS is missing in arch_ptrace() leading
to the following Oops because [REGSET_FPR] entry is not initialised in
native_regsets[].

[   41.917608] BUG: Unable to handle kernel instruction fetch
[   41.922849] Faulting instruction address: 0xff8fd228
[   41.927760] Oops: Kernel access of bad area, sig: 11 [#1]
[   41.933089] BE PAGE_SIZE=4K PREEMPT CMPC885
[   41.940753] Modules linked in:
[   41.943768] CPU: 0 PID: 366 Comm: gdb Not tainted 5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty #4835
[   41.952800] NIP:  ff8fd228 LR: c004d9e0 CTR: ff8fd228
[   41.957790] REGS: caae9df0 TRAP: 0400   Not tainted  (5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty)
[   41.966741] MSR:  40009032 <EE,ME,IR,DR,RI>  CR: 82004248  XER: 20000000
[   41.973540]
[   41.973540] GPR00: c004d9b4 caae9eb0 c1b64f60 c1b64520 c0713cd4 caae9eb8 c1bacdfc 00000004
[   41.973540] GPR08: 00000200 ff8fd228 c1bac700 00001032 28004242 1061aaf4 00000001 106d64a0
[   41.973540] GPR16: 00000000 00000000 7fa0a774 10610000 7fa0aef9 00000000 10610000 7fa0a538
[   41.973540] GPR24: 7fa0a580 7fa0a570 c1bacc00 c1b64520 c1bacc00 caae9ee8 00000108 c0713cd4
[   42.009685] NIP [ff8fd228] 0xff8fd228
[   42.013300] LR [c004d9e0] __regset_get+0x100/0x124
[   42.018036] Call Trace:
[   42.020443] [caae9eb0] [c004d9b4] __regset_get+0xd4/0x124 (unreliable)
[   42.026899] [caae9ee0] [c004da94] copy_regset_to_user+0x5c/0xb0
[   42.032751] [caae9f10] [c002f640] sys_ptrace+0xe4/0x588
[   42.037915] [caae9f30] [c0011010] ret_from_syscall+0x0/0x28
[   42.043422] --- interrupt: c00 at 0xfd1f8e4
[   42.047553] NIP:  0fd1f8e4 LR: 1004a688 CTR: 00000000
[   42.052544] REGS: caae9f40 TRAP: 0c00   Not tainted  (5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty)
[   42.061494] MSR:  0000d032 <EE,PR,ME,IR,DR,RI>  CR: 48004442  XER: 00000000
[   42.068551]
[   42.068551] GPR00: 0000001a 7fa0a040 77dad7e0 0000000e 00000170 00000000 7fa0a078 00000004
[   42.068551] GPR08: 00000000 108deb88 108dda40 106d6010 44004442 1061aaf4 00000001 106d64a0
[   42.068551] GPR16: 00000000 00000000 7fa0a774 10610000 7fa0aef9 00000000 10610000 7fa0a538
[   42.068551] GPR24: 7fa0a580 7fa0a570 1078fe00 1078fd70 1078fd70 00000170 0fdd3244 0000000d
[   42.104696] NIP [0fd1f8e4] 0xfd1f8e4
[   42.108225] LR [1004a688] 0x1004a688
[   42.111753] --- interrupt: c00
[   42.114768] Instruction dump:
[   42.117698] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
[   42.125443] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
[   42.133195] ---[ end trace d35616f22ab2100c ]---

Adding the missing #ifdef is not good because gdb doesn't like getting
an error when getting registers.

Instead, make ptrace return 0s when CONFIG_PPC_FPU_REGS is not set.

Fixes: b6254ced ("powerpc/signal: Don't manage floating point regs when no FPU")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9121a44a2d50ba1af18d8aa5ada06c9a3bea8afd.1617200085.git.christophe.leroy@csgroup.eu

H_PROTECT expects the flag value to include flags:
  AVPN, pp0, pp1, pp2, key0-key4, Noexec, CMO Option flags

This patch updates hpte_updatepp() to fetch the storage key value from
the linux page table and use the same in H_PROTECT hcall.

native_hpte_updatepp() is not updated because the kernel doesn't clear
the existing storage key value there. The kernel also doesn't use
hpte_updatepp() callback for updating storage keys.

This fixes the below kernel crash observed with KUAP enabled.

  BUG: Unable to handle kernel data access on write at 0xc009fffffc440000
  Faulting instruction address: 0xc0000000000b7030
  Key fault AMR: 0xfcffffffffffffff IAMR: 0xc0000077bc498100
  Found HPTE: v = 0x40070adbb6fffc05 r = 0x1ffffffffff1194
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  ...
  CFAR: c000000000010100 DAR: c009fffffc440000 DSISR: 02200000 IRQMASK: 0
  ...
  NIP memset+0x68/0x104
  LR  pcpu_alloc+0x54c/0xb50
  Call Trace:
    pcpu_alloc+0x55c/0xb50 (unreliable)
    blk_stat_alloc_callback+0x94/0x150
    blk_mq_init_allocated_queue+0x64/0x560
    blk_mq_init_queue+0x54/0xb0
    scsi_mq_alloc_queue+0x30/0xa0
    scsi_alloc_sdev+0x1cc/0x300
    scsi_probe_and_add_lun+0xb50/0x1020
    __scsi_scan_target+0x17c/0x790
    scsi_scan_channel+0x90/0xe0
    scsi_scan_host_selected+0x148/0x1f0
    do_scan_async+0x2c/0x2a0
    async_run_entry_fn+0x78/0x220
    process_one_work+0x264/0x540
    worker_thread+0xa8/0x600
    kthread+0x190/0x1a0
    ret_from_kernel_thread+0x5c/0x6c

With KUAP enabled the kernel uses storage key 3 for all its
translations. But as shown by the debug print, in this specific case we
have the hash page table entry created with key value 0.

  Found HPTE: v = 0x40070adbb6fffc05 r = 0x1ffffffffff1194

and DSISR indicates a key fault.

This can happen due to parallel fault on the same EA by different CPUs:

  CPU 0					CPU 1
  fault on X

  H_PAGE_BUSY set
  					fault on X

  finish fault handling and
  clear H_PAGE_BUSY
  					check for H_PAGE_BUSY
  					continue with fault handling.

This implies CPU1 will end up calling hpte_updatepp for address X and
the kernel updated the hash pte entry with key 0

Fixes: d94b827e ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Reported-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Debugged-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210326070755.304625-1-aneesh.kumar@linux.ibm.com

The pseries join/suspend sequence in its current form was written with
the assumption that it was the only user of H_PROD and that it needn't
handle spurious successful returns from H_JOIN. That's wrong;
powerpc's paravirt spinlock code uses H_PROD, and CPUs entering
do_join() can be woken prematurely from H_JOIN with a status of
H_SUCCESS as a result. This causes all CPUs to exit the sequence
early, preventing suspend from occurring at all.

Add a 'done' boolean flag to the pseries_suspend_info struct, and have
the waking thread set it before waking the other threads. Threads
which receive H_SUCCESS from H_JOIN retry if the 'done' flag is still
unset.

Fixes: 9327dc0a ("powerpc/pseries/mobility: use stop_machine for join/suspend")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210315080045.460331-3-nathanl@linux.ibm.com

The atomic_t counter is the only shared state for the join/suspend
sequence so far, but that will change. Contain it in a
struct (pseries_suspend_info), and document its intended use. No
functional change.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210315080045.460331-2-nathanl@linux.ibm.com

Both add_slot_store() and remove_slot_store() try to fix up the
drc_name copied from the store buffer by placing a NUL terminator at
nbyte + 1 or in place of a '\n' if present. However, the static buffer
that we copy the drc_name data into is not zeroed and can contain
anything past the n-th byte.

This is problematic if a '\n' byte appears in that buffer after nbytes
and the string copied into the store buffer was not NUL terminated to
start with as the strchr() search for a '\n' byte will mark this
incorrectly as the end of the drc_name string resulting in a drc_name
string that contains garbage data after the n-th byte.

Additionally it will cause us to overwrite that '\n' byte on the stack
with NUL, potentially corrupting data on the stack.

The following debugging shows an example of the drmgr utility writing
"PHB 4543" to the add_slot sysfs attribute, but add_slot_store()
logging a corrupted string value.

  drmgr: drmgr: -c phb -a -s PHB 4543 -d 1
  add_slot_store: drc_name = PHB 4543°|<82>!, rc = -19

Fix this by using strscpy() instead of memcpy() to ensure the string
is NUL terminated when copied into the static drc_name buffer.
Further, since the string is now NUL terminated the code only needs to
change '\n' to '\0' when present.

Cc: stable@vger.kernel.org
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
[mpe: Reformat change log and add mention of possible stack corruption]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210315214821.452959-1-tyreld@linux.ibm.com

The code relies on constant folding of cpu_has_feature() based
on possible and always true values as defined per
CPU_FTRS_ALWAYS and CPU_FTRS_POSSIBLE.

Build failure is encountered with for instance
book3e_all_defconfig on kisskb in the AMDGPU driver which uses
cpu_has_feature(CPU_FTR_VSX_COMP) to decide whether calling
kernel_enable_vsx() or not.

The failure is due to cpu_has_feature() not being inlined with
that configuration with gcc 4.9.

In the same way as commit acdad8fb ("powerpc: Force inlining of
mmu_has_feature to fix build failure"), for inlining of
cpu_has_feature().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b231dfa040ce4cc37f702f5c3a595fdeabfe0462.1615378209.git.christophe.leroy@csgroup.eu

With some defconfig including CONFIG_CC_OPTIMIZE_FOR_SIZE,
(for instance mvme5100_defconfig and ps3_defconfig), gcc 5
generates a call to _restgpr_31_x.

Until recently it went unnoticed, but
commit 42ed6d56 ("powerpc/vdso: Block R_PPC_REL24 relocations")
made it rise to the surface.

Provide that function (copied from lib/crtsavres.S) in
gettimeofday.S

Fixes: ab037dd8 ("powerpc/vdso: Switch VDSO to generic C implementation.")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a7aa198a88bcd33c6e35e99f70f86c7b7f2f9440.1615270757.git.christophe.leroy@csgroup.eu

unrecoverable_exception() is called from interrupt handlers or
after an interrupt handler has failed.

Make it a standard function to avoid doubling the actions
performed on interrupt entry (e.g.: user time accounting).

Fixes: 3a96570f ("powerpc: convert interrupt handlers to use wrappers")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ae96c59fa2cb7f24a8929c58cfa2c909cb8ff1f1.1615291471.git.christophe.leroy@csgroup.eu

Add stub instances of enable_kernel_vsx() and disable_kernel_vsx()
when CONFIG_VSX is not set, to avoid following build failure.

  CC [M]  drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.o
  In file included from ./drivers/gpu/drm/amd/amdgpu/../display/dc/dm_services_types.h:29,
                   from ./drivers/gpu/drm/amd/amdgpu/../display/dc/dm_services.h:37,
                   from drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c:27:
  drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c: In function 'dcn_bw_apply_registry_override':
  ./drivers/gpu/drm/amd/amdgpu/../display/dc/os_types.h:64:3: error: implicit declaration of function 'enable_kernel_vsx'; did you mean 'enable_kernel_fp'? [-Werror=implicit-function-declaration]
     64 |   enable_kernel_vsx(); \
        |   ^~~~~~~~~~~~~~~~~
  drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c:640:2: note: in expansion of macro 'DC_FP_START'
    640 |  DC_FP_START();
        |  ^~~~~~~~~~~
  ./drivers/gpu/drm/amd/amdgpu/../display/dc/os_types.h:75:3: error: implicit declaration of function 'disable_kernel_vsx'; did you mean 'disable_kernel_fp'? [-Werror=implicit-function-declaration]
     75 |   disable_kernel_vsx(); \
        |   ^~~~~~~~~~~~~~~~~~
  drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c:676:2: note: in expansion of macro 'DC_FP_END'
    676 |  DC_FP_END();
        |  ^~~~~~~~~
  cc1: some warnings being treated as errors
  make[5]: *** [drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.o] Error 1

This works because the caller is checking if VSX is available using
cpu_has_feature():

  #define DC_FP_START() { \
  	if (cpu_has_feature(CPU_FTR_VSX_COMP)) { \
  		preempt_disable(); \
  		enable_kernel_vsx(); \
  	} else if (cpu_has_feature(CPU_FTR_ALTIVEC_COMP)) { \
  		preempt_disable(); \
  		enable_kernel_altivec(); \
  	} else if (!cpu_has_feature(CPU_FTR_FPU_UNAVAILABLE)) { \
  		preempt_disable(); \
  		enable_kernel_fp(); \
  	} \

When CONFIG_VSX is not selected, cpu_has_feature(CPU_FTR_VSX_COMP)
constant folds to 'false' so the call to enable_kernel_vsx() is
discarded and the build succeeds.

Fixes: 16a9dea1 ("amdgpu: Enable initial DCN support on POWER")
Cc: stable@vger.kernel.org # v5.6+
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Incorporate some discussion comments into the change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8d7d285a027e9d21f5ff7f850fa71a2655b0c4af.1615279170.git.christophe.leroy@csgroup.eu

Nick's patch cleaning up the SRR specifiers in exception-64s.S missed
a single instance of EXC_HV_OR_STD. Clean that up.

Caught by clang's integrated assembler.

Fixes: 3f7fbd97 ("powerpc/64s/exception: Clean up SRR specifiers")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225031006.1204774-2-dja@axtens.net

This bit operation was inverted and set the low bit rather than
cleared it, breaking the ability to ptrace non-volatile GPRs after
exec. Fix.

Only affects 64e and 32-bit.

Fixes: feb9df34 ("powerpc/64s: Always has full regs, so remove remnant checks")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210308085530.3191843-1-npiggin@gmail.com

In ppc_function_entry() we look for a specific set of instructions by
masking the instructions and comparing with a known value. Currently
those known values are just literal hex values, and we recently
discovered one of them was wrong.

Instead construct the values using the existing constants we have for
defining various fields of instructions.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20210309071544.515303-1-mpe@ellerman.id.au

'lis r2,N' is 'addis r2,0,N' and the instruction encoding in the macro
LIS_R2 is incorrect (it currently maps to 'addis r0,r2,N'). Fix the
same.

Fixes: c71b7eff ("powerpc: Add ABIv2 support to ppc_function_entry")
Cc: stable@vger.kernel.org # v3.16+
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210304020411.16796-1-naveen.n.rao@linux.vnet.ibm.com

Pull powerpc fixes from Michael Ellerman:
 "One non-fix, the conversion of vio_driver->remove() to return void,
  which touches various powerpc specific drivers.

  Fix the privilege checks we do in our perf handling, which could cause
  soft/hard lockups in some configurations.

  Fix a bug with IRQ affinity seen on kdump kernels when CPU 0 is
  offline in the second kernel.

  Fix missed page faults after mprotect(..., PROT_NONE) on 603 (32-bit).

  Fix a bug in our VSX (vector) instruction emulation, which should only
  be seen when doing VSX ops to cache inhibited mappings.

  Three commits fixing various build issues with obscure configurations.

  Thanks to Athira Rajeev, Cédric Le Goater, Christophe Leroy, Christoph
  Plattner, Greg Kurz, Jordan Niethe, Laurent Vivier, Ravi Bangoria,
  Tyrel Datwyler, and Uwe Kleine-König"

* tag 'powerpc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/sstep: Fix VSX instruction emulation
  powerpc/perf: Fix handling of privilege level checks in perf interrupt context
  powerpc: Force inlining of mmu_has_feature to fix build failure
  vio: make remove callback return void
  powerpc/syscall: Force inlining of __prep_irq_for_enabled_exit()
  powerpc/603: Fix protection of user pages mapped with PROT_NONE
  powerpc/pseries: Don't enforce MSI affinity with kdump
  powerpc/4xx: Fix build errors from mfdcr()

Pull m68k fix from Geert Uytterhoeven:
 "Fix virt_addr_valid() W=1 compiler warnings.

  This is a single non-critical fix. As the build bots are now testing
  all new code with W=1, these warnings are popping up everywhere,
  confusing people. Hence I think it makes sense to silence it as soon
  as possible"

* tag 'm68k-for-v5.12-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Fix virt_addr_valid() W=1 compiler warnings

If CONFIG_DEBUG_SG=y, and CONFIG_MMU=y:

    include/linux/scatterlist.h: In function ‘sg_set_buf’:
    arch/m68k/include/asm/page_mm.h:174:49: warning: ordered comparison of pointer with null pointer [-Wextra]
      174 | #define virt_addr_valid(kaddr) ((void *)(kaddr) >= (void *)PAGE_OFFSET && (void *)(kaddr) < high_memory)
	  |                                                 ^~

or CONFIG_MMU=n:

    include/linux/scatterlist.h: In function ‘sg_set_buf’:
    arch/m68k/include/asm/page_no.h:33:50: warning: ordered comparison of pointer with null pointer [-Wextra]
       33 | #define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
	  |                                                  ^~

Fix this by doing the comparison in the "unsigned long" instead of the
"void *" domain.

Note that for now this is only seen when compiling btrfs, due to commit
e9aa7c28 ("btrfs: enable W=1 checks for btrfs"), but as people
are doing more W=1 compile testing, it will start to show up elsewhere,
too.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://lore.kernel.org/r/20210305084122.4118826-1-geert@linux-m68k.org

Pull rdma fixes from Jason Gunthorpe:
 "Nothing special here, though Bob's regression fixes for rxe would have
  made it before the rc cycle had there not been such strong winter
  weather!

   - Fix corner cases in the rxe reference counting cleanup that are
     causing regressions in blktests for SRP

   - Two kdoc fixes so W=1 is clean

   - Missing error return in error unwind for mlx5

   - Wrong lock type nesting in IB CM"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/rxe: Fix errant WARN_ONCE in rxe_completer()
  RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt()
  RDMA/rxe: Fix missed IB reference counting in loopback
  RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc
  RDMA/mlx5: Set correct kernel-doc identifier
  IB/mlx5: Add missing error code
  RDMA/rxe: Fix missing kconfig dependency on CRYPTO
  RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep

Pull gcc-plugins fixes from Kees Cook:
 "Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have
  been reported a couple times now by static analyzers, so best to get
  them fixed to reduce the noise. :)

   - Fix coding style issues (Jason Yan)"

* tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: latent_entropy: remove unneeded semicolon
  gcc-plugins: structleak: remove unneeded variable 'ret'

Pull pstore fixes from Kees Cook:

 - Rate-limit ECC warnings (Dmitry Osipenko)

 - Fix error path check for NULL (Tetsuo Handa)

* tag 'pstore-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: Rate-limit "uncorrectable error in header" message
  pstore: Fix warning in pstore_kill_sb()

Merge tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:
 "Fix DM verity target's optional Forward Error Correction (FEC) for
  Reed-Solomon roots that are unaligned to block size"

* tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm verity: fix FEC for RS roots unaligned to block size
  dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size

Pull block fixes from Jens Axboe:

 - NVMe fixes:
      - more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal
        Terjan)
      - fix a hwmon error return (Daniel Wagner)
      - fix the keep alive timeout initialization (Martin George)
      - ensure the model_number can't be changed on a used subsystem
        (Max Gurtovoy)

 - rsxx missing -EFAULT on copy_to_user() failure (Dan)

 - rsxx remove unused linux.h include (Tian)

 - kill unused RQF_SORTED (Jean)

 - updated outdated BFQ comments (Joseph)

 - revert work-around commit for bd_size_lock, since we removed the
   offending user in this merge window (Damien)

* tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-block:
  nvmet: model_number must be immutable once set
  nvme-fabrics: fix kato initialization
  nvme-hwmon: Return error code when registration fails
  nvme-pci: add quirks for Lexar 256GB SSD
  nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state
  nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST.
  rsxx: Return -EFAULT if copy_to_user() fails
  block/bfq: update comments and default value in docs for fifo_expire
  rsxx: remove unused including <linux/version.h>
  block: Drop leftover references to RQF_SORTED
  block: revert "block: fix bd_size_lock use"

Pull io_uring fixes from Jens Axboe:
 "A bit of a mix between fallout from the worker change, cleanups and
  reductions now possible from that change, and fixes in general. In
  detail:

   - Fully serialize manager and worker creation, fixing races due to
     that.

   - Clean up some naming that had gone stale.

   - SQPOLL fixes.

   - Fix race condition around task_work rework that went into this
     merge window.

   - Implement unshare. Used for when the original task does unshare(2)
     or setuid/seteuid and friends, drops the original workers and forks
     new ones.

   - Drop the only remaining piece of state shuffling we had left, which
     was cred. Move it into issue instead, and we can drop all of that
     code too.

   - Kill f_op->flush() usage. That was such a nasty hack that we had
     out of necessity, we no longer need it.

   - Following from ->flush() removal, we can also drop various bits of
     ctx state related to SQPOLL and cancelations.

   - Fix an issue with IOPOLL retry, which originally was fallout from a
     filemap change (removing iov_iter_revert()), but uncovered an issue
     with iovec re-import too late.

   - Fix an issue with system suspend.

   - Use xchg() for fallback work, instead of cmpxchg().

   - Properly destroy io-wq on exec.

   - Add create_io_thread() core helper, and use that in io-wq and
     io_uring. This allows us to remove various silly completion events
     related to thread setup.

   - A few error handling fixes.

  This should be the grunt of fixes necessary for the new workers, next
  week should be quieter. We've got a pending series from Pavel on
  cancelations, and how tasks and rings are indexed. Outside of that,
  should just be minor fixes. Even with these fixes, we're still killing
  a net ~80 lines"

* tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block: (41 commits)
  io_uring: don't restrict issue_flags for io_openat
  io_uring: make SQPOLL thread parking saner
  io-wq: kill hashed waitqueue before manager exits
  io_uring: clear IOCB_WAITQ for non -EIOCBQUEUED return
  io_uring: don't keep looping for more events if we can't flush overflow
  io_uring: move to using create_io_thread()
  kernel: provide create_io_thread() helper
  io_uring: reliably cancel linked timeouts
  io_uring: cancel-match based on flags
  io-wq: ensure all pending work is canceled on exit
  io_uring: ensure that threads freeze on suspend
  io_uring: remove extra in_idle wake up
  io_uring: inline __io_queue_async_work()
  io_uring: inline io_req_clean_work()
  io_uring: choose right tctx->io_wq for try cancel
  io_uring: fix -EAGAIN retry with IOPOLL
  io-wq: fix error path leak of buffered write hash map
  io_uring: remove sqo_task
  io_uring: kill sqo_dead and sqo submission halting
  io_uring: ignore double poll add on the same waitqueue head
  ...

Pull power management fixes from Rafael Wysocki:
 "These fix the usage of device links in the runtime PM core code and
  update the DTPM (Dynamic Thermal Power Management) feature added
  recently.

  Specifics:

   - Make the runtime PM core code avoid attempting to suspend supplier
     devices before updating the PM-runtime status of a consumer to
     'suspended' (Rafael Wysocki).

   - Fix DTPM (Dynamic Thermal Power Management) root node
     initialization and label that feature as EXPERIMENTAL in Kconfig
     (Daniel Lezcano)"

* tag 'pm-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  powercap/drivers/dtpm: Add the experimental label to the option description
  powercap/drivers/dtpm: Fix root node initialization
  PM: runtime: Update device status before letting suppliers suspend

Pull ACPI fix from Rafael Wysocki:
 "Make the empty stubs of some helper functions used when CONFIG_ACPI is
  not set actually match those functions (Andy Shevchenko)"

* tag 'acpi-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: bus: Constify is_acpi_node() and friends (part 2)

Pull iommu fixes from Joerg Roedel:

 - Fix a sleeping-while-atomic issue in the AMD IOMMU code

 - Disable lazy IOTLB flush for untrusted devices in the Intel VT-d
   driver

 - Fix status code definitions for Intel VT-d

 - Fix IO Page Fault issue in Tegra IOMMU driver

* tag 'iommu-fixes-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix status code for Allocate/Free PASID command
  iommu: Don't use lazy flush for untrusted device
  iommu/tegra-smmu: Fix mc errors on tegra124-nyan
  iommu/amd: Fix sleeping in atomic in increase_address_space()

Pull btrfs fixes from David Sterba:
 "More regression fixes and stabilization.

  Regressions:

   - zoned mode
      - count zone sizes in wider int types
      - fix space accounting for read-only block groups

   - subpage: fix page tail zeroing

  Fixes:

   - fix spurious warning when remounting with free space tree

   - fix warning when creating a directory with smack enabled

   - ioctl checks for qgroup inheritance when creating a snapshot

   - qgroup
      - fix missing unlock on error path in zero range
      - fix amount of released reservation on error
      - fix flushing from unsafe context with open transaction,
        potentially deadlocking

   - minor build warning fixes"

* tag 'for-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: do not account freed region of read-only block group as zone_unusable
  btrfs: zoned: use sector_t for zone sectors
  btrfs: subpage: fix the false data csum mismatch error
  btrfs: fix warning when creating a directory with smack enabled
  btrfs: don't flush from btrfs_delayed_inode_reserve_metadata
  btrfs: export and rename qgroup_reserve_meta
  btrfs: free correct amount of space in btrfs_delayed_inode_reserve_metadata
  btrfs: fix spurious free_space_tree remount warning
  btrfs: validate qgroup inherit for SNAP_CREATE_V2 ioctl
  btrfs: unlock extents in btrfs_zero_range in case of quota reservation errors
  btrfs: ref-verify: use 'inline void' keyword ordering

Pull devicetree fixes from Rob Herring:

 - Another batch of graph and video-interfaces schema conversions

 - Drop DT header symlink for dropped C6X arch

 - Fix bcm2711-hdmi schema error

* tag 'devicetree-fixes-for-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: media: Use graph and video-interfaces schemas, round 2
  dts: drop dangling c6x symlink
  dt-bindings: bcm2711-hdmi: Fix broken schema

Pull tracing fixes from Steven Rostedt:
 "Functional fixes:

   - Fix big endian conversion for arm64 in recordmcount processing

   - Fix timestamp corruption in ring buffer on discarding events

   - Fix memory leak in __create_synth_event()

   - Skip selftests if tracing is disabled as it will cause them to
     fail.

  Non-functional fixes:

   - Fix help text in Kconfig

   - Remove duplicate prototype for trace_empty()

   - Fix stale comment about the trace_event_call flags.

  Self test update:

   - Add more information to the validation output of when a corrupt
     timestamp is found in the ring buffer, and also trigger a warning
     to make sure that tests catch it"

* tag 'trace-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix comment about the trace_event_call flags
  tracing: Skip selftests if tracing is disabled
  tracing: Fix memory leak in __create_synth_event()
  ring-buffer: Add a little more information and a WARN when time stamp going backwards is detected
  ring-buffer: Force before_stamp and write_stamp to be different on discard
  tracing: Fix help text of TRACEPOINT_BENCHMARK in Kconfig
  tracing: Remove duplicate declaration from trace.h
  ftrace: Have recordmcount use w8 to read relp->r_info in arm64_is_fake_mcount

In rxe_comp.c in rxe_completer() the function free_pkt() did not clear skb
which triggered a warning at 'done:' and could possibly at 'exit:'. The
WARN_ONCE() calls are not actually needed.  The call to free_pkt() is
moved to the end to clearly show that all skbs are freed.

Fixes: 899aba89 ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

rxe_rcv_mcast_pkt() dropped a reference to ib_device when no error
occurred causing an underflow on the reference counter.  This code is
cleaned up to be clearer and easier to read.

Fixes: 899aba89 ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

When the noted patch below extending the reference taken by
rxe_get_dev_from_net() in rxe_udp_encap_recv() until each skb is freed it
was not matched by a reference in the loopback path resulting in
underflows.

Fixes: 899aba89 ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

45d189c6 ("io_uring: replace force_nonblock with flags") did
something strange for io_openat() slicing all issue_flags but
IO_URING_F_NONBLOCK. Not a bug for now, but better to just forward the
flags.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull NVMe fixes from Christoph:

"nvme fixes for 5.12:

 - more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal Terjan)
 - fix a hwmon error return (Daniel Wagner)
 - fix the keep alive timeout initialization (Martin George)
 - ensure the model_number can't be changed on a used subsystem
   (Max Gurtovoy)"

* tag 'nvme-5.12-2021-03-05' of git://git.infradead.org/nvme:
  nvmet: model_number must be immutable once set
  nvme-fabrics: fix kato initialization
  nvme-hwmon: Return error code when registration fails
  nvme-pci: add quirks for Lexar 256GB SSD
  nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state
  nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST.

We have this weird true/false return from parking, and then some of the
callers decide to look at that. It can lead to unbalanced parks and
sqd locking. Have the callers check the thread status once it's parked.
We know we have the lock at that point, so it's either valid or it's NULL.

Fix race with parking on thread exit. We need to be careful here with
ordering of the sdq->lock and the IO_SQ_THREAD_SHOULD_PARK bit.

Rename sqd->completion to sqd->parked to reflect that this is the only
thing this completion event doesn.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we race with shutting down the io-wq context and someone queueing
a hashed entry, then we can exit the manager with it armed. If it then
triggers after the manager has exited, we can have a use-after-free where
io_wqe_hash_wake() attempts to wake a now gone manager process.

Move the killing of the hashed write queue into the manager itself, so
that we know we've killed it before the task exits.

Fixes: e941894e ("io-wq: make buffered file write hashed work map per-ctx")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The callback can only be armed, if we get -EIOCBQUEUED returned. It's
important that we clear the WAITQ bit for other cases, otherwise we can
queue for async retry and filemap will assume that we're armed and
return -EAGAIN instead of just blocking for the IO.

Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It doesn't make sense to wait for more events to come in, if we can't
even flush the overflow we already have to the ring. Return -EBUSY for
that condition, just like we do for attempts to submit with overflow
pending.

Cc: stable@vger.kernel.org # 5.11
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This allows us to do task creation and setup without needing to use
completions to try and synchronize with the starting thread. Get rid of
the old io_wq_fork_thread() wrapper, and the 'wq' and 'worker' startup
completion events - we can now do setup before the task is running.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

* powercap:
  powercap/drivers/dtpm: Add the experimental label to the option description
  powercap/drivers/dtpm: Fix root node initialization