An error occurred fetching the project authors.
  1. 27 Apr, 2009 1 commit
  2. 29 Dec, 2008 4 commits
  3. 13 Oct, 2008 4 commits
  4. 03 Feb, 2008 1 commit
  5. 23 Jan, 2008 1 commit
    • James Smart's avatar
      [SCSI] lpfc 8.2.4 : Miscellaneous Fixes · 09372820
      James Smart authored
      Miscellaneous Fixes:
      - Fix a couple of sparse complaints
      - Reset the FCP recovery flag when the node is not a FCP2 device.
      - Speed up offline prep delays
      - Fixed a memory leak in lpfc_mem_alloc failure path
      - Fixed external loopback test.
      - Fixed error code returned from the driver when HBA is over heated.
      - Correct Max NPIV vport to limits read from adapter
      - Add missing locks around fc_flag and FC_NEEDS_REG_VPI
      - Add missing hba ids for device identification
      - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands
      - Changed all temperature event messages from warning to error
      - Fix reporting of link speed when link is down
      - Added support for MBX_WRITE_WWN mailbox command
      - Change del_timer_sync() in ISR to del_timer() in interrupt handler
      - Correct instances of beXX_to_cpu() that should be cpu_to_beXX()
      - Perform target flush before releasing node references on module unload
      - Avoid bogus devloss_tmo messages when driver unloads
      - Fix panic when HBA generates ERATT interupt
      - Fix mbox race condition and a workaround on back-to-back mailbox commands
      - Force NPIV off for pt2pt mode between 2 NPorts
      - Stop worker thread before removing fc_host.
      - Fix up discovery timeout error case due to missing clear_la
      - Tighten mailbox polling code to speed up detection of fast completions
      - Only allow DUMP_MEMORY if adapter offline due to overtemp errors
      - Added extended error information to the log messages in chip init.
      Signed-off-by: default avatarJames Smart <James.Smart@emulex.com>
      Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
      09372820
  6. 12 Jan, 2008 2 commits
    • James Smart's avatar
      [SCSI] lpfc 8.2.3 : Miscellaneous Small Fixes - part 1 · 98c9ea5c
      James Smart authored
      Miscellaneous Small Fixes - part 1
      - Fix typo kmzlloc -> kzalloc
      - Fix discovery ndlp use after free panic
      - Fix link event causing flood of 0108 messages
      - Relieve some mbox congestion on link up with 100 vports
      - Fix broken vport parameters
      - Prevent lock recursion in logo_reglogin_issue
      - Split uses of error variable in lpfc_pci_probe_one into retval and error
      - Remove completion code related to dev_loss_tmo
      - Remove unused LPFC_MAX_HBQ #define
      - Don't compare pointers to 0 for sparse
      - Make 2 functions static for sparse
      - Fix default rpi cleanup code causing rogue ndlps to remain on the NPR list
      - Remove annoying ELS messages when driver is unloaded
      - Fix Cannot issue Register Fabric login problems on link up
      - Remove LPFC_EVT_DEV_LOSS_DELAY
      - Fix FC port swap test leads to device going offline
      - Fix vport CT flags to only be set when accepted
      - Add code to handle signals during vport_create
      - Fix too many retries in FC-AL mode
      - Pull lpfc_port_link_failure out of lpfc_linkdown_port
      Signed-off-by: default avatarJames Smart <James.Smart@emulex.com>
      Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
      98c9ea5c
    • James Smart's avatar
      [SCSI] lpfc 8.2.3 : Added support for ASICs that report temperature · 57127f15
      James Smart authored
      Added support for ASICs that report temperature. Temperature notices are
       reported as events and logged. Temperature can be read via sysfs.
      Signed-off-by: default avatarJames Smart <James.Smart@emulex.com>
      Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
      57127f15
  7. 01 Aug, 2007 3 commits
  8. 18 Jun, 2007 4 commits
    • James Smart's avatar
      [SCSI] lpfc: bug fixes · 858c9f6c
      James Smart authored
       Following the NPIV support, the following changes have been accumulated
       in the testing and qualification of the driver:
      
       - Fix affinity of ELS ring to slow/deferred event processing
       - Fix Ring attention masks
       - Defer dev_loss_tmo timeout handling to worker thread
       - Consolidate link down error classification for better error checking
       - Remove unused/deprecated nlp_initiator_tmr timer
       - Fix for async scan - move adapter init code back into pci_probe_one
         context. Fix async scan interfaces.
       - Expand validation of ability to create vports
       - Extract VPI resource cnt from firmware
       - Tuning of Login/Reject policies to better deal with overwhelmned targets
       - Misc ELS and discovery fixes
       - Export the npiv_enable attribute to sysfs
       - Mailbox handling fix
       - Add debugfs support
       - A few other small misc fixes:
          - wrong return values, double-frees, bad locking
       - Added adapter failure heartbeat
      Signed-off-by: default avatarJames Smart <James.Smart@emulex.com>
      Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
      858c9f6c
    • James Smart's avatar
      [SCSI] lpfc: NPIV: add NPIV support on top of SLI-3 · 92d7f7b0
      James Smart authored
      NPIV support is added to the driver.  It utilizes the interfaces of
      the fc transport for the creation and deletion of vports. Within the
      driver, a new Scsi_Host is created for each NPIV instance, and is
      paired with a new instance of a FC port.  This allows N FC Port
      elements to share a single Adapter.
      Signed-off-by: default avatarJames Smart <James.Smart@emulex.com>
      Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
      92d7f7b0
    • James Smart's avatar
      [SCSI] lpfc: NPIV: add SLI-3 interface · ed957684
      James Smart authored
      NPIV support is only available via new adapter interface extensions,
      termed SLI-3. This interface changes some of the basic behaviors such
      as command and response ring element sizes and data structures, as
      well as a change in buffer posting.  Note: the new firmware extensions
      are found only on our mid-range and enterprise 4Gig adapters - so NPIV
      support is available only on these newer adapters. The latest firmware
      can be downloaded from the Emulex support page.
      Signed-off-by: default avatarJames Smart <James.Smart@emulex.com>
      Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
      ed957684
    • James Smart's avatar
      [SCSI] lpfc: NPIV: split ports · 2e0fef85
      James Smart authored
      The driver is reorganized to separate the handling of the adapter from
      the handling of the FC port. Adapter handling includes submissions of
      command requests, receiving responses, and managing adapter resources.
      The FC port includes the discovery engine, login handling, and the
      mapping of a Scsi_Host on the "port".  Although not a large functional
      change, as it touches core structures and functions, resulting in a
      large text delta.
      Signed-off-by: default avatarJames Smart <James.Smart@emulex.com>
      Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
      2e0fef85
  9. 06 May, 2007 2 commits
  10. 06 Aug, 2006 1 commit
  11. 20 Apr, 2006 1 commit
  12. 01 Mar, 2006 3 commits
  13. 07 Nov, 2005 1 commit
  14. 29 Oct, 2005 1 commit
  15. 12 Aug, 2005 2 commits
  16. 03 Jul, 2005 2 commits
  17. 02 Jul, 2005 1 commit
  18. 18 Apr, 2005 1 commit