1. 14 Mar, 2016 40 commits
    • Arnd Bergmann's avatar
      ath9k: fix misleading indentation · 362210e0
      Arnd Bergmann authored
      A cleanup patch in linux-3.18 moved around some code in the ath9k
      driver and left some code to be indented in a misleading way,
      made worse by the addition of some new code for p2p mode, as
      discovered by a new gcc-6 warning:
      
      drivers/net/wireless/ath/ath9k/init.c: In function 'ath9k_set_hw_capab':
      drivers/net/wireless/ath/ath9k/init.c:851:4: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation]
          hw->wiphy->iface_combinations = if_comb;
          ^~
      drivers/net/wireless/ath/ath9k/init.c:847:3: note: ...this 'if' clause, but it is not
         if (ath9k_is_chanctx_enabled())
         ^~
      
      The code is in fact correct, but the indentation is not, so I'm
      reformatting it as it should have been after the original cleanup.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Fixes: 499afacc ("ath9k: Isolate ath9k_use_chanctx module parameter")
      Fixes: eb61f9f6 ("ath9k: advertise p2p dev support when chanctx")
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      362210e0
    • Arnd Bergmann's avatar
      ath9k: fix buffer overrun for ar9287 · 83d6f1f1
      Arnd Bergmann authored
      Code that was added back in 2.6.38 has an obvious overflow
      when accessing a static array, and at the time it was added
      only a code comment was put in front of it as a reminder
      to have it reviewed properly.
      
      This has not happened, but gcc-6 now points to the specific
      overflow:
      
      drivers/net/wireless/ath/ath9k/eeprom.c: In function 'ath9k_hw_get_gain_boundaries_pdadcs':
      drivers/net/wireless/ath/ath9k/eeprom.c:483:44: error: array subscript is above array bounds [-Werror=array-bounds]
           maxPwrT4[i] = data_9287[idxL].pwrPdg[i][4];
                         ~~~~~~~~~~~~~~~~~~~~~~~~~^~~
      
      It turns out that the correct array length exists in the local
      'intercepts' variable of this function, so we can just use that
      instead of hardcoding '4', so this patch changes all three
      instances to use that variable. The other two instances were
      already correct, but it's more consistent this way.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Fixes: 940cd2c1 ("ath9k_hw: merge the ar9287 version of ath9k_hw_get_gain_boundaries_pdadcs")
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      83d6f1f1
    • Arnd Bergmann's avatar
      farsync: fix off-by-one bug in fst_add_one · e725a66c
      Arnd Bergmann authored
      gcc-6 finds an out of bounds access in the fst_add_one function
      when calculating the end of the mmio area:
      
      drivers/net/wan/farsync.c: In function 'fst_add_one':
      drivers/net/wan/farsync.c:418:53: error: index 2 denotes an offset greater than size of 'u8[2][8192] {aka unsigned char[2][8192]}' [-Werror=array-bounds]
       #define BUF_OFFSET(X)   (BFM_BASE + offsetof(struct buf_window, X))
                                                           ^
      include/linux/compiler-gcc.h:158:21: note: in definition of macro '__compiler_offsetof'
        __builtin_offsetof(a, b)
                           ^
      drivers/net/wan/farsync.c:418:37: note: in expansion of macro 'offsetof'
       #define BUF_OFFSET(X)   (BFM_BASE + offsetof(struct buf_window, X))
                                           ^~~~~~~~
      drivers/net/wan/farsync.c:2519:36: note: in expansion of macro 'BUF_OFFSET'
                                        + BUF_OFFSET ( txBuffer[i][NUM_TX_BUFFER][0]);
                                          ^~~~~~~~~~
      
      The warning is correct, but not critical because this appears
      to be a write-only variable that is set by each WAN driver but
      never accessed afterwards.
      
      I'm taking the minimal fix here, using the correct pointer by
      pointing 'mem_end' to the last byte inside of the register area
      as all other WAN drivers do, rather than the first byte outside of
      it. An alternative would be to just remove the mem_end member
      entirely.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e725a66c
    • Arnd Bergmann's avatar
      mlx4: add missing braces in verify_qp_parameters · baefd701
      Arnd Bergmann authored
      The implementation of QP paravirtualization back in linux-3.7 included
      some code that looks very dubious, and gcc-6 has grown smart enough
      to warn about it:
      
      drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'verify_qp_parameters':
      drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3154:5: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation]
           if (optpar & MLX4_QP_OPTPAR_ALT_ADDR_PATH) {
           ^~
      drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3144:4: note: ...this 'if' clause, but it is not
          if (slave != mlx4_master_func_num(dev))
      
      >From looking at the context, I'm reasonably sure that the indentation
      is correct but that it should have contained curly braces from the
      start, as the update_gid() function in the same patch correctly does.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Fixes: 54679e14 ("mlx4: Implement QP paravirtualization and maintain phys_pkey_cache for smp_snoop")
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      baefd701
    • Arnd Bergmann's avatar
      net: mediatek: check device_reset return code · 916848ca
      Arnd Bergmann authored
      The device_reset() function may fail, so we have to check
      its return value, e.g. to make deferred probing work correctly.
      gcc warns about it because of the warn_unused_result attribute:
      
      drivers/net/ethernet/mediatek/mtk_eth_soc.c: In function 'mtk_probe':
      drivers/net/ethernet/mediatek/mtk_eth_soc.c:1679:2: error: ignoring return value of 'device_reset', declared with attribute warn_unused_result [-Werror=unused-result]
      
      This adds the trivial error check to propagate the return value
      to the generic platform device probe code.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      916848ca
    • Arnd Bergmann's avatar
      net: mediatek: remove incorrect dma_mask assignment · a25cdc0d
      Arnd Bergmann authored
      Device drivers should not mess with the DMA mask directly,
      but instead call dma_set_mask() etc if needed.
      
      In case of the mtk_eth_soc driver, the mask already gets set
      correctly when the device is created, and setting it again
      is against the documented API.
      
      This removes the incorrect setting.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a25cdc0d
    • Arnd Bergmann's avatar
      net: mediatek: use dma_addr_t correctly · 6aab1a62
      Arnd Bergmann authored
      dma_alloc_coherent() expects a dma_addr_t pointer as its argument,
      not an 'unsigned int', and gcc correctly warns about broken
      code in the mtk_init_fq_dma function:
      
      drivers/net/ethernet/mediatek/mtk_eth_soc.c: In function 'mtk_init_fq_dma':
      drivers/net/ethernet/mediatek/mtk_eth_soc.c:463:13: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]
      
      This changes the type of the local variable to dma_addr_t.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6aab1a62
    • Arnaldo Carvalho de Melo's avatar
      net: Fix use after free in the recvmmsg exit path · 34b88a68
      Arnaldo Carvalho de Melo authored
      The syzkaller fuzzer hit the following use-after-free:
      
        Call Trace:
         [<ffffffff8175ea0e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:295
         [<ffffffff851cc31a>] __sys_recvmmsg+0x6fa/0x7f0 net/socket.c:2261
         [<     inline     >] SYSC_recvmmsg net/socket.c:2281
         [<ffffffff851cc57f>] SyS_recvmmsg+0x16f/0x180 net/socket.c:2270
         [<ffffffff86332bb6>] entry_SYSCALL_64_fastpath+0x16/0x7a
        arch/x86/entry/entry_64.S:185
      
      And, as Dmitry rightly assessed, that is because we can drop the
      reference and then touch it when the underlying recvmsg calls return
      some packets and then hit an error, which will make recvmmsg to set
      sock->sk->sk_err, oops, fix it.
      Reported-and-Tested-by: default avatarDmitry Vyukov <dvyukov@google.com>
      Cc: Alexander Potapenko <glider@google.com>
      Cc: Eric Dumazet <edumazet@google.com>
      Cc: Kostya Serebryany <kcc@google.com>
      Cc: Sasha Levin <sasha.levin@oracle.com>
      Fixes: a2e27255 ("net: Introduce recvmmsg socket syscall")
      http://lkml.kernel.org/r/20160122211644.GC2470@redhat.comSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      34b88a68
    • David S. Miller's avatar
      Merge branch 'thunderx-perf' · b6e40382
      David S. Miller authored
      Sunil Goutham says:
      
      ====================
      net: thunderx: Performance enhancement changes
      
      Below patches attempts to improve performance by reducing
      no of atomic operations while allocating new receive buffers
      and reducing cache misses by adjusting nicvf structure elements.
      
      Changes from v1:
       No changes, resubmitting a fresh as per David's suggestion.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b6e40382
    • Sunil Goutham's avatar
      net: thunderx: Adjust nicvf structure to reduce cache misses · 1d368790
      Sunil Goutham authored
      Adjusted nicvf structure such that all elements used in hot
      path like napi, xmit e.t.c fall into same cache line. This reduced
      no of cache misses and resulted in ~2% increase in no of packets
      handled on a core.
      
      Also modified elements with :1 notation to boolean, to be
      consistent with other element definitions.
      Signed-off-by: default avatarSunil Goutham <sgoutham@cavium.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1d368790
    • Sunil Goutham's avatar
      net: thunderx: Set recevie buffer page usage count in bulk · 5c2e26f6
      Sunil Goutham authored
      Instead of calling get_page() for every receive buffer carved out
      of page, set page's usage count at the end, to reduce no of atomic
      calls.
      Signed-off-by: default avatarSunil Goutham <sgoutham@cavium.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5c2e26f6
    • Richard Alpe's avatar
      tipc: make sure IPv6 header fits in skb headroom · 9bd160bf
      Richard Alpe authored
      Expand headroom further in order to be able to fit the larger IPv6
      header. Prior to this patch this caused a skb under panic for certain
      tipc packets when using IPv6 UDP bearer(s).
      Signed-off-by: default avatarRichard Alpe <richard.alpe@ericsson.com>
      Acked-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9bd160bf
    • David S. Miller's avatar
      Merge branch 'mvneta-hwbm' · c9214f50
      David S. Miller authored
      Gregory CLEMENT says:
      
      ====================
      API set for HW Buffer management
      
      This is the sixth version of the API set for HW Buffer management (that was
      initially submitted here:
      http://thread.gmane.org/gmane.linux.kernel/2125152).
      
      This version is just a rebasing onto the last net-next. I also added
      the Tested-by flag from Sebastian Careba : "The patch set applies
      successfully and it works well, no more Samba issues any longer".
      
      For the record in the previous versions I made the following changes:
      v4 -> v5:
      - Add a field with the size of the buffer of the pool was added. It
        then allow to fix some misused size in the mvneta_bm code when using
        the new framework.
      
      - Add a new patch from Marcin for sram allowing to require
        non-bufferable access to the memory. It was needed for the hardware
        buffer management of the mvneta.
      
      - Fix the build issue notified by the 0-day builder when building the
        drivers as module.
      
      v3 -> v4
      - Fix build issue when HWBM is not selected
      
      v2 -> v3
      - Make a HWBM and a SWBM version of the mvneta_rx() function in order
        to reduce the the conditional code. Kept a condition inside the
        mvneta_poll because specializing this function would have means
        duplicating 95% of the code.
      
      - Put back the register_netdev() call at the end of the mvneta_probe()
        function. In order to have a unique ID for each port, just used a
        global variable in the driver.
      
      - Added a fix from Marcin in the "net: mvneta: bm: add support for
        hardware buffer management" patch: "when dropping packets, only
        buffer pointers passed from BM to descriptors have to be returned to
        the pool. In submitted version after closing the port and
        mvneta_rxq_deinit(), it was very likely that a lot of fake buffers
        are added to the pool, because all descriptors took part in
        iteration."
      
      - Removed the select MVNETA_BM from the Kconfig, it will let the user
        the choice to use not use it if they want.
      
      v1 -> v2
      - The hardware buffer management helpers are no more built by default
        and now depend on a hidden config symbol which has to be selected
        by the driver if needed
      - The hwbm_pool_refill() and hwbm_pool_add() now receive a gfp_t as
        argument allowing the caller to specify the flag it needs.
      - buf_num is now tested to ensure there is no wrapping
      - A spinlock has been added to protect the hwbm_pool_add() function in
        SMP or irq context.
      - used pr_warn instead of pr_debug in case of errors.
      - fixed the mvneta implementation by returning the buffer to the pool
        at various place instead of ignoring it.
      - Squashed "bus: mvenus-mbus: Fix size test for
         mvebu_mbus_get_dram_win_info" into bus: mvebu-mbus: provide api for
         obtaining IO and DRAM window information.
      - Added my signed-otf-by on all the patches as submitter of the series.
      - Renamed the dts patches with the pattern "ARM: dts: platform:"
      - Removed the patch "ARM: mvebu: enable SRAM support in
        mvebu_v7_defconfig" of this series and already applied it
      - Modified the order of the patches.
      
      In order to ease the test the branch mvneta-BM-framework-v6 is
      available at git@github.com:MISL-EBU-System-SW/mainline-public.git.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c9214f50
    • Gregory CLEMENT's avatar
      net: mvneta: Use the new hwbm framework · baa11ebc
      Gregory CLEMENT authored
      Now that the hardware buffer management framework had been introduced,
      let's use it.
      Tested-by: default avatarSebastian Careba <nitroshift@yahoo.com>
      Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      baa11ebc
    • Gregory CLEMENT's avatar
      net: add a hardware buffer management helper API · 8cb2d8bf
      Gregory CLEMENT authored
      This basic implementation allows to share code between driver using
      hardware buffer management. As the code is hardware agnostic, there is
      few helpers, most of the optimization brought by the an HW BM has to be
      done at driver level.
      Tested-by: default avatarSebastian Careba <nitroshift@yahoo.com>
      Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8cb2d8bf
    • Marcin Wojtas's avatar
      net: mvneta: bm: add support for hardware buffer management · dc35a10f
      Marcin Wojtas authored
      Buffer manager (BM) is a dedicated hardware unit that can be used by all
      ethernet ports of Armada XP and 38x SoC's. It allows to offload CPU on RX
      path by sparing DRAM access on refilling buffer pool, hardware-based
      filling of descriptor ring data and better memory utilization due to HW
      arbitration for using 'short' pools for small packets.
      
      Tests performed with A388 SoC working as a network bridge between two
      packet generators showed increase of maximum processed 64B packets by
      ~20k (~555k packets with BM enabled vs ~535 packets without BM). Also
      when pushing 1500B-packets with a line rate achieved, CPU load decreased
      from around 25% without BM to 20% with BM.
      
      BM comprise up to 4 buffer pointers' (BP) rings kept in DRAM, which
      are called external BP pools - BPPE. Allocating and releasing buffer
      pointers (BP) to/from BPPE is performed indirectly by write/read access
      to a dedicated internal SRAM, where internal BP pools (BPPI) are placed.
      BM hardware controls status of BPPE automatically, as well as assigning
      proper buffers to RX descriptors. For more details please refer to
      Functional Specification of Armada XP or 38x SoC.
      
      In order to enable support for a separate hardware block, common for all
      ports, a new driver has to be implemented ('mvneta_bm'). It provides
      initialization sequence of address space, clocks, registers, SRAM,
      empty pools' structures and also obtaining optional configuration
      from DT (please refer to device tree binding documentation). mvneta_bm
      exposes also a necessary API to mvneta driver, as well as a dedicated
      structure with BM information (bm_priv), whose presence is used as a
      flag notifying of BM usage by port. It has to be ensured that mvneta_bm
      probe is executed prior to the ones in ports' driver. In case BM is not
      used or its probe fails, mvneta falls back to use software buffer
      management.
      
      A sequence executed in mvneta_probe function is modified in order to have
      an access to needed resources before possible port's BM initialization is
      done. According to port-pools mapping provided by DT appropriate registers
      are configured and the buffer pools are filled. RX path is modified
      accordingly. Becaues the hardware allows a wide variety of configuration
      options, following assumptions are made:
      * using BM mechanisms can be selectively disabled/enabled basing
        on DT configuration among the ports
      * 'long' pool's single buffer size is tied to port's MTU
      * using 'long' pool by port is obligatory and it cannot be shared
      * using 'short' pool for smaller packets is optional
      * one 'short' pool can be shared among all ports
      
      This commit enables hardware buffer management operation cooperating with
      existing mvneta driver. New device tree binding documentation is added and
      the one of mvneta is updated accordingly.
      
      [gregory.clement@free-electrons.com: removed the suspend/resume part]
      Signed-off-by: default avatarMarcin Wojtas <mw@semihalf.com>
      Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dc35a10f
    • Marcin Wojtas's avatar
      bus: mvebu-mbus: provide api for obtaining IO and DRAM window information · f2900ace
      Marcin Wojtas authored
      This commit enables finding appropriate mbus window and obtaining its
      target id and attribute for given physical address in two separate
      routines, both for IO and DRAM windows. This functionality
      is needed for Armada XP/38x Network Controller's Buffer Manager and
      PnC configuration.
      
      [gregory.clement@free-electrons.com: Fix size test for
      mvebu_mbus_get_dram_win_info]
      Signed-off-by: default avatarMarcin Wojtas <mw@semihalf.com>
      [DRAM window information reference in LKv3.10]
      Signed-off-by: default avatarEvan Wang <xswang@marvell.com>
      Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f2900ace
    • Gregory CLEMENT's avatar
      ARM: dts: armada-xp-openblocks-ax3-4: Add BM support · 293fdc24
      Gregory CLEMENT authored
      Allow Openblock AX3 using hardware buffer management with mvneta.
      Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      293fdc24
    • Marcin Wojtas's avatar
      ARM: dts: armada-xp: enable buffer manager support on Armada XP boards · 9dd7a57e
      Marcin Wojtas authored
      Since mvneta driver supports using hardware buffer management (BM), in
      order to use it, board files have to be adjusted accordingly. This commit
      enables BM on AXP-DB and AXP-GP in same manner - because number of ports
      on those boards is the same as number of possible pools, each port is
      supposed to use single pool for all kind of packets.
      
      Moreover appropriate entry is added to 'soc' node ranges, as well as "okay"
      status for 'bm' and 'bm-bppi' (internal SRAM) nodes.
      Signed-off-by: default avatarMarcin Wojtas <mw@semihalf.com>
      Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9dd7a57e
    • Marcin Wojtas's avatar
      ARM: dts: armada-xp: add buffer manager nodes · ebae1376
      Marcin Wojtas authored
      Armada XP network controller supports hardware buffer management (BM).
      Since it is now enabled in mvneta driver, appropriate nodes can be added
      to armada-xp.dtsi - for the actual common BM unit (bm@c0000) and its
      internal SRAM (bm-bppi), which is used for indirect access to buffer
      pointer ring residing in DRAM.
      
      Pools - ports mapping, bm-bppi entry in 'soc' node's ranges and optional
      parameters are supposed to be set in board files.
      Signed-off-by: default avatarMarcin Wojtas <mw@semihalf.com>
      Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ebae1376
    • Marcin Wojtas's avatar
      ARM: dts: armada-38x: enable buffer manager support on Armada 38x boards · c49e99c2
      Marcin Wojtas authored
      Since mvneta driver supports using hardware buffer management (BM), in
      order to use it, board files have to be adjusted accordingly. This commit
      enables BM on:
      * A385-DB-AP - each port has its own pool for long and common pool for
      short packets,
      * A388-ClearFog - same as above,
      * A388-DB - to each port unique 'short' and 'long' pools are mapped,
      * A388-GP - same as above.
      
      Moreover appropriate entry is added to 'soc' node ranges, as well as "okay"
      status for 'bm' and 'bm-bppi' (internal SRAM) nodes.
      
      [gregory.clement@free-electrons.com: add suppport for the ClearFog board]
      Signed-off-by: default avatarMarcin Wojtas <mw@semihalf.com>
      Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      Acked-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c49e99c2
    • Marcin Wojtas's avatar
      ARM: dts: armada-38x: add buffer manager nodes · 4a547a5a
      Marcin Wojtas authored
      Armada 38x network controller supports hardware buffer management (BM).
      Since it is now enabled in mvneta driver, appropriate nodes can be added
      to armada-38x.dtsi - for the actual common BM unit (bm@c8000) and its
      internal SRAM (bm-bppi), which is used for indirect access to buffer
      pointer ring residing in DRAM.
      
      Pools - ports mapping, bm-bppi entry in 'soc' node's ranges and optional
      parameters are supposed to be set in board files.
      Signed-off-by: default avatarMarcin Wojtas <mw@semihalf.com>
      Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4a547a5a
    • Marcin Wojtas's avatar
      misc: sram: add optional ioremap without write combining · eb43e023
      Marcin Wojtas authored
      Some SRAM users may require non-bufferable access to the memory, which is
      impossible, because devm_ioremap_wc() is used for setting sram->virt_base.
      
      This commit adds optional flag 'no-memory-wc', which allow to choose remap
      method, using DT property. Documentation is updated accordingly.
      Signed-off-by: default avatarMarcin Wojtas <mw@semihalf.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      eb43e023
    • David S. Miller's avatar
      Merge tag 'wireless-drivers-next-for-davem-2016-03-14' of... · d3bf9b19
      David S. Miller authored
      Merge tag 'wireless-drivers-next-for-davem-2016-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
      
      Kalle Valo says:
      
      ====================
      wireless-drivers patches for 4.6
      
      Major changes:
      
      rtl8xxxu
      
      * add 8723bu support
      
      wl18xx
      
      * add radar_debug_mode debugfs file for DFS testing
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d3bf9b19
    • David S. Miller's avatar
      Merge branch 'ipv4-ipv6-csums' · 20db778e
      David S. Miller authored
      Alexander Duyck says:
      
      ====================
      Fix differences between IPv4 and IPv6 TCP/UDP checksum calculation
      
      This patch series is meant to address the differences that exist between
      IPv4 and IPv6 in terms of checksum calculation.  Specifically the IPv6
      function csum_ipv6_magic treated length as a value that could be greater
      than 64K, while csum_tcpudp_magic was truncating the length at 16 bits.
      After looking over the code and giving it some thought I decided it would
      be best to update the IPv4 function so that it worked the same way the IPv6
      one did.  This allows us to get the same results given the same inputs for
      both functions.  As a result we can use the same processes to reverse the
      calculation in the event we need to do something like remove the length of
      the pseudo-header checksum.
      
      I also took the opportunity to standardize things so that the parameters
      for these functions all use the correct types.  IPv4 addresses are __be32,
      length should always be __u32, and protocol is a __u8.
      
      With this change in place it corrects an issue with UDP tunnels in which we
      were getting a checksum that was off by 1 when performing fragmentation on
      inner UDP packets.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      20db778e
    • Alexander Duyck's avatar
      GSO/UDP: Use skb->len instead of udph->len to determine length of original skb · 08334824
      Alexander Duyck authored
      It is possible for tunnels to end up generating IP or IPv6 datagrams that
      are larger than 64K and expecting to be segmented.  As such we need to deal
      with length values greater than 64K.  In order to accommodate this we need
      to update the code to work with a 32b length value instead of a 16b one.
      Signed-off-by: default avatarAlexander Duyck <aduyck@mirantis.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      08334824
    • Alexander Duyck's avatar
      ipv6: Pass proto to csum_ipv6_magic as __u8 instead of unsigned short · 1e940829
      Alexander Duyck authored
      This patch updates csum_ipv6_magic so that it correctly recognizes that
      protocol is a unsigned 8 bit value.
      
      This will allow us to better understand what limitations may or may not be
      present in how we handle the data.  For example there are a number of
      places that call htonl on the protocol value.  This is likely not necessary
      and can be replaced with a multiplication by ntohl(1) which will be
      converted to a shift by the compiler.
      Signed-off-by: default avatarAlexander Duyck <aduyck@mirantis.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1e940829
    • Alexander Duyck's avatar
      ipv4: Update parameters for csum_tcpudp_magic to their original types · 01cfbad7
      Alexander Duyck authored
      This patch updates all instances of csum_tcpudp_magic and
      csum_tcpudp_nofold to reflect the types that are usually used as the source
      inputs.  For example the protocol field is populated based on nexthdr which
      is actually an unsigned 8 bit value.  The length is usually populated based
      on skb->len which is an unsigned integer.
      
      This addresses an issue in which the IPv6 function csum_ipv6_magic was
      generating a checksum using the full 32b of skb->len while
      csum_tcpudp_magic was only using the lower 16 bits.  As a result we could
      run into issues when attempting to adjust the checksum as there was no
      protocol agnostic way to update it.
      
      With this change the value is still truncated as many architectures use
      "(len + proto) << 8", however this truncation only occurs for values
      greater than 16776960 in length and as such is unlikely to occur as we stop
      the inner headers at ~64K in size.
      
      I did have to make a few minor changes in the arm, mn10300, nios2, and
      score versions of the function in order to support these changes as they
      were either using things such as an OR to combine the protocol and length,
      or were using ntohs to convert the length which would have truncated the
      value.
      
      I also updated a few spots in terms of whitespace and type differences for
      the addresses.  Most of this was just to make sure all of the definitions
      were in sync going forward.
      Signed-off-by: default avatarAlexander Duyck <aduyck@mirantis.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      01cfbad7
    • David S. Miller's avatar
      ipv4: Don't do expensive useless work during inetdev destroy. · fbd40ea0
      David S. Miller authored
      When an inetdev is destroyed, every address assigned to the interface
      is removed.  And in this scenerio we do two pointless things which can
      be very expensive if the number of assigned interfaces is large:
      
      1) Address promotion.  We are deleting all addresses, so there is no
         point in doing this.
      
      2) A full nf conntrack table purge for every address.  We only need to
         do this once, as is already caught by the existing
         masq_dev_notifier so masq_inet_event() can skip this.
      Reported-by: default avatarSolar Designer <solar@openwall.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Tested-by: default avatarCyrill Gorcunov <gorcunov@openvz.org>
      fbd40ea0
    • David S. Miller's avatar
      Merge tag 'nfc-next-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next · f4fa6e6d
      David S. Miller authored
      Samuel Ortiz says:
      
      ====================
      NFC 4.6 pull request
      
      This is a very small one this time, with only 5 patches.
      There are a couple of big items that could not be merged/finished
      on time.
      
      We have:
      
      - 2 LLCP fixes for a race and a potential OOM.
      - 2 cleanups for the pn544 and microread drivers.
      - 1 Maintainer addition for the s3fwrn5 driver.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f4fa6e6d
    • David S. Miller's avatar
      Merge branch 'macsec' · 01099881
      David S. Miller authored
      Sabrina Dubroca says:
      
      ====================
      MACsec IEEE 802.1AE implementation
      
      MACsec (IEEE 802.1AE [0]) is a protocol that provides security for
      wired ethernet LANs.  MACsec offers two protection modes:
      authentication only, or authenticated encryption.
      
      MACsec defines "secure channels" that allow transmission from one node
      to one or more others.  Communication on a channel is done over a
      succession of "secure associations", that each use a specific key.
      Secure associations are identified by their "association number" in
      the range 0..3.  A secure association is retired when its 32-bit
      packet number would wrap, and the same association number can later be
      reused with a new key and packet number.
      
      The standard mode of encryption is GCM AES with 128 bits keys,
      although an extension allows 256 bits keys [1] (not implemented in
      this submission).
      
      When using MACsec, an extra header, called "SecTAG", is added between
      the ethernet header and the original payload:
      
       +---------------------------------+----------------+----------------+
       |        (MACsec ethertype)       |     TCI_AN     |       SL       |
       +---------------------------------+----------------+----------------+
       |                           Packet Number                           |
       +-------------------------------------------------------------------+
       |                     Secure Channel Identifier                     |
       |                            (optional)                             |
       +-------------------------------------------------------------------+
      
      TCI_AN:
       version
       end_station
       sci_present
       scb
       encrypted
       changed_text
       association_number (2 bits)
      SL:
       short_length (6 bits)
       unused (2 bits)
      
      The ethertype for the packet is set to 0x88E5, and the original
      ethertype becomes part of the secure payload, which may be encrypted.
      The ethernet header and the SecTAG are always transmitted in the
      clear, but are integrity-protected.
      
      MACsec supports optional replay protection with a configurable replay
      window.
      
      MACsec is designed to be used with the MKA extension to 802.1X (MACsec
      Key Agreement protocol) [2], which provides channel attribution and
      key distribution to the nodes, but can also be used with static keys
      getting fed manually by an administrator.
      
      Optional (not supported yet) features:
       - confidentiality offset: in encryption mode, part of the payload may
         be left unencrypted.
       - choice of cipher suite: GCM AES with 256 bits has been standardised
         [1].
      
      Implementation
      
      A netdevice is created on top of a real device for each TX secure
      channel, like we do for VLANs.  Multiple TX channels can be created on
      top of the same underlying device.
      
      Several other approaches were considered for the RX path:
      
       - dev_add_pack: doesn't work, because we want to filter out
         unprotected packets
       - transparent mode: MACsec would be enabled directly on the real
         netdevice.  For this, we cannot use a rx_handler directly because
         MACsec must be available for underlying devices enslaved in a
         bridge or in a bond, so we need a hook directly in
         __netif_receive_skb_core.  This approach makes it harder to filter
         non-encrypted packets on RX without forcing the user to setup some
         rules, so the "transparent" mode is not so transparent after all.
         It also makes TX more complex than with a dedicated netdevice.
      
      One issue with the proposed implementation is that the qdisc layer for
      the real device operates on already encrypted packets.
      
      Netlink API
      
      This is currently a mix of rtnetlink (to create the device and set up
      the TX channel) and genl (for RX channels, secure associations and
      their keys).  genl provides clean demultiplexing of the {TX,RX}{SC,SA}
      commands.
      
      Use cases
      
      The normal use case is wired LANs, including veth and slave devices
      for bonding/teaming or bridges.
      
      MACsec can also be used on any device that makes a full ethernet
      header visible, for example VXLAN.
      The VXLAN+MACsec setup would be:
      
               hypervisor        |     virtual machine
          <real_dev>---<VXLAN>---|---<dev>---<macsec_dev>
      
      And the packets would look like this:
      
      | eth | IP | UDP | VXLAN | eth | MACsec | IP | ... | MACsec ICV |
      
      One benefit on this approach to encryption in the cloud is that the
      payload is encrypted by the tenant, not by the tunnel provider, thus
      the tenant has full control over the keys.
      
      Changes from v1:
       - rework netlink API after discussion with Johannes Berg
         - nest attributes, rename
         - export stats as separate attributes
         - add some comments
       - misc small fixes (rcu, constants, struct organization)
      
      Changes from RFCv2:
       - fix ENCODING_SA param validation
       - add parent link to netlink ifdumps
      
      Changes from RFCv1:
       - addressed comments from Florian and Paolo + kbuild robot
       - also perform post-decrypt handling after crypto callback
       - fixed ->dellink behavior
      
      Future plans:
       - offload to hardware, on nics that support it
       - implement optional features
      
      [0] http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf
      [1] http://standards.ieee.org/getieee802/download/802.1AEbn-2011.pdf
      [2] http://standards.ieee.org/getieee802/download/802.1X-2010.pdf
      [3] RFCv1: http://www.spinics.net/lists/netdev/msg358151.html
      [4] RFCv2: http://www.spinics.net/lists/netdev/msg362389.html
      [5] v1: http://www.spinics.net/lists/netdev/msg367959.html
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      01099881
    • Sabrina Dubroca's avatar
      macsec: introduce IEEE 802.1AE driver · c09440f7
      Sabrina Dubroca authored
      This is an implementation of MACsec/IEEE 802.1AE.  This driver
      provides authentication and encryption of traffic in a LAN, typically
      with GCM-AES-128, and optional replay protection.
      
      http://standards.ieee.org/getieee802/download/802.1AE-2006.pdfSigned-off-by: default avatarSabrina Dubroca <sd@queasysnail.net>
      Reviewed-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c09440f7
    • Sabrina Dubroca's avatar
    • Sabrina Dubroca's avatar
      dece8d2b
    • liping.zhang's avatar
      net: socket: use pr_info_once to tip the obsolete usage of PF_PACKET · f3c98690
      liping.zhang authored
      There is no need to use the static variable here, pr_info_once is more
      concise.
      Signed-off-by: default avatarLiping Zhang <liping.zhang@spreadtrum.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f3c98690
    • Zefir Kurtisi's avatar
      at803x: fix suspend/resume for SGMII link · 98267311
      Zefir Kurtisi authored
      When operating the at803x in SGMII mode, resuming the chip
      from power down brings up the copper-side link but leaves
      the SGMII link in unconnected state (tested with at8031
      attached to gianfar). In effect, this caused a permanent
      link loss once the related interface was put down.
      
      This patch ensures that power down handling in supspend()
      and resume() is also applied to the SGMII link.
      Signed-off-by: default avatarZefir Kurtisi <zefir.kurtisi@neratec.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      98267311
    • David S. Miller's avatar
      Merge branch 'net-more-bulk-free-users' · 5d608414
      David S. Miller authored
      Jesper Dangaard Brouer says:
      
      ====================
      net: bulk free adjustment and two driver use-cases
      
      I've split out the bulk free adjustments, from the bulk alloc patches,
      as I want the adjustment to napi_consume_skb be in same kernel cycle
      the API was introduced.
      
      Adjustments based on discussion:
       Subj: "mlx4: use napi_consume_skb API to get bulk free operations"
       http://thread.gmane.org/gmane.linux.network/402503/focus=403386
      
      Patchset based on net-next at commit 3ebeac1d
      
      V4: more nitpicks from Sergei
      V3: spelling fixes from Sergei
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5d608414
    • Jesper Dangaard Brouer's avatar
      mlx5: use napi_consume_skb API to get bulk free operations · 8ec736e5
      Jesper Dangaard Brouer authored
      Bulk free of SKBs happen transparently by the API call napi_consume_skb().
      The napi budget parameter is needed by napi_consume_skb() to detect
      if called from netpoll.
      Signed-off-by: default avatarJesper Dangaard Brouer <brouer@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8ec736e5
    • Jesper Dangaard Brouer's avatar
      mlx4: use napi_consume_skb API to get bulk free operations · b4a53379
      Jesper Dangaard Brouer authored
      Bulk free of SKBs happen transparently by the API call napi_consume_skb().
      The napi budget parameter is usually needed by napi_consume_skb()
      to detect if called from netpoll.  In this patch it has an extra meaning.
      
      For mlx4 driver, the mlx4_en_stop_port() call is done outside
      NAPI/softirq context, and cleanup the entire TX ring via
      mlx4_en_free_tx_buf().  The code mlx4_en_free_tx_desc() for
      freeing SKBs are shared with NAPI calls.
      
      To handle this shared use the zero budget indication is reused,
      and handled appropriately in napi_consume_skb(). To reflect this,
      variable is called napi_mode for the function call that needed
      this distinction.
      Signed-off-by: default avatarJesper Dangaard Brouer <brouer@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b4a53379
    • Jesper Dangaard Brouer's avatar
      net: adjust napi_consume_skb to handle non-NAPI callers · 885eb0a5
      Jesper Dangaard Brouer authored
      Some drivers reuse/share code paths that free SKBs between NAPI
      and non-NAPI calls. Adjust napi_consume_skb to handle this
      use-case.
      
      Before, calls from netpoll (w/ IRQs disabled) was handled and
      indicated with a budget zero indication.  Use the same zero
      indication to handle calls not originating from NAPI/softirq.
      Simply handled by using dev_consume_skb_any().
      
      This adds an extra branch+call for the netpoll case (checking
      in_irq() + irqs_disabled()), but that is okay as this is a slowpath.
      Suggested-by: default avatarAlexander Duyck <aduyck@mirantis.com>
      Signed-off-by: default avatarJesper Dangaard Brouer <brouer@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      885eb0a5