After the removal of rt->n we do not create a neighbour entry at route
insertion time (rt6_bind_neighbour is gone). As long as no neighbour is
created because of "useful traffic" we skip this routing entry because
rt6_check_neigh cannot pick up a valid neighbour (neigh == NULL) and
thus returns false.

This change was introduced by commit
887c95cc ("ipv6: Complete neighbour
entry removal from dst_entry.")

To quote RFC4191:
"If the host has no information about the router's reachability, then
the host assumes the router is reachable."

and also:
"A host MUST NOT probe a router's reachability in the absence of useful
traffic that the host would have sent to the router if it were reachable."

So, just assume the router is reachable and let's rt6_probe do the
rest. We don't need to create a neighbour on route insertion time.

If we don't compile with CONFIG_IPV6_ROUTER_PREF (RFC4191 support)
a neighbour is only valid if its nud_state is NUD_VALID. I did not find
any references that we should probe the router on route insertion time
via the other RFCs. So skip this route in that case.

v2:
a) use IS_ENABLED instead of #ifdefs (thanks to Sergei Shtylyov)
Reported-by: Pierre Emeriaud <petrus.lt@gmail.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ping_v6_sendmsg currently returns 0 on success. It should return
the number of bytes written instead.
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit aec0a40a ("netem: use rb tree to implement the time queue")
added a regression if a child qdisc is attached to netem, as we perform
a NULL dereference.

Fix this by adding a temporary variable to cache
netem_skb_cb(skb)->time_to_send.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit eea86af6 ("net: sock: adapt SOCK_MIN_RCVBUF and
SOCK_MIN_SNDBUF") forgot the sk_buff alignment taken into account
in __alloc_skb() : skb->truesize = SKB_TRUESIZE(size);

While above commit fixed the sender issue, the receiver is still
dropping the second packet (on loopback device), because the receiver
socket can not really hold two skbs :
First packet truesize already is above sk_rcvbuf, so even TCP coalescing
cannot help.

On a typical 64bit build, each tcp skb truesize is 2304, instead of 2272
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

"work" needs to be freed before returning on this error path.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inner_protocol was added to struct sk_buff in
0d89d203 ("MPLS: Add limited GSO support"),
which is scheduled to be included in v3.11.

That patch did not update __copy_skb_header to copy the inner_protocol.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This enables the driver to take advantage of the FEC VLAN
indicator to improve performance.
Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unfortunately, WoL is broken and the system will immediately
resume after suspending, and I can't seem to figure out why.
Remove WoL support until the issue can be found.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:
	drivers/net/ethernet/freescale/fec_main.c
	drivers/net/ethernet/renesas/sh_eth.c
	net/ipv4/gre.c

The GRE conflict is between a bug fix (kfree_skb --> kfree_skb_list)
and the splitting of the gre.c code into seperate files.

The FEC conflict was two sets of changes adding ethtool support code
in an "!CONFIG_M5272" CPP protected block.

Finally the sh_eth.c conflict was between one commit add bits set
in the .eesr_err_check mask whilst another commit removed the
.tx_error_check member and assignments.
Signed-off-by: David S. Miller <davem@davemloft.net>

Similarly to TCP/UDP offloading, move all related GRE functions to
gre_offload.c to make things more explicit and similar to the rest
of the code.
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

correct placeholder declarations to prevent build breakage when
!CONFIG_NET_LL_RX_POLL
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In path mtu check, ip header total length works for gre device
but not for gre-tap device.  Use skb len which is consistent
for all tunneling types.  This is old bug in gre.
This also fixes mtu calculation bug introduced by
commit c5441932 (GRE: Refactor GRE tunneling code).
Reported-by: Timo Teras <timo.teras@iki.fi>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

James Chapman says:

====================
L2TP data sequence numbers, if enabled, ensure in-order delivery. A
receiver may reorder data packets, or simply drop out-of-sequence
packets. If reordering is not enabled, the current implementation does
not handle data packet loss correctly, which can result in a stalled
L2TP session datapath as soon as the first packet is lost. Most L2TP
users either disable sequence numbers or enable data packet reordering
when sequence numbers are used to circumvent the issue. This patch
series fixes the problem, and makes the L2TP sequence number handling
RFC-compliant.

v2 incorporates string format changes requested by sergei.shtylyov@cogentembedded.com.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If L2TP data sequence numbers are enabled and reordering is not
enabled, data reception stops if a packet is lost since the kernel
waits for a sequence number that is never resent. (When reordering is
enabled, data reception restarts when the reorder timeout expires.) If
no reorder timeout is set, we should count the number of in-sequence
packets after the out-of-sequence (OOS) condition is detected, and reset
sequence number state after a number of such packets are received.

For now, the number of in-sequence packets while in OOS state which
cause the sequence number state to be reset is hard-coded to 5. This
could be configurable later.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The L2TP datapath is not currently RFC-compliant when sequence numbers
are used in L2TP data packets. According to the L2TP RFC, any received
sequence number NR greater than or equal to the next expected NR is
acceptable, where the "greater than or equal to" test is determined by
the NR wrap point. This differs for L2TPv2 and L2TPv3, so add state in
the session context to hold the max NR value and the NR window size in
order to do the acceptable sequence number value check. These might be
configurable later, but for now we derive it from the tunnel L2TP
version, which determines the sequence number field size.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change moves some code handling data sequence numbers into a
separate function to avoid too much indentation. This is to prepare
for some changes to data sequence number handling in subsequent
patches.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Macro get_unused_fd() is used to allocate a file descriptor with
default flags. Those default flags (0) can be "unsafe":
O_CLOEXEC must be used by default to not leak file descriptor
across exec().

Instead of macro get_unused_fd(), functions anon_inode_getfd()
or get_unused_fd_flags() should be used with flags given by userspace.
If not possible, flags should be set to O_CLOEXEC to provide userspace
with a default safe behavor.

In a further patch, get_unused_fd() will be removed so that
new code start using anon_inode_getfd() or get_unused_fd_flags()
with correct flags.

This patch replaces calls to get_unused_fd() with equivalent call to
get_unused_fd_flags(0) to preserve current behavor for existing code.

The hard coded flag value (0) should be reviewed on a per-subsystem basis,
and, if possible, set to O_CLOEXEC.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prior this patch, the internal debugging was based on ifdef
and also some printk were useless because many info are exposed
via ethtool.
This patch remove all the ifdef defines and now we only use
netif_msg_XXX levels.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The dev_forward_skb() assignment of pkt_type should be done
after the call to eth_type_trans().

ip-encapsulated packets can be handled by localhost. But skb->pkt_type
can be PACKET_OTHERHOST when packet comes via veth into ip tunnel device.
In that case, the packet is dropped by ip_rcv().
Although this example uses gretap. l2tp-eth also has same issue.
For l2tp-eth case, add dummy device for ip address and ip l2tp command.

netns A |                     root netns                      | netns B
   veth<->veth=bridge=gretap <-loop back-> gretap=bridge=veth<->veth

arp packet ->
pkt_type
         BROADCAST------------>ip_rcv()------------------------>

                                                             <- arp reply
                                                                pkt_type
                               ip_rcv()<-----------------OTHERHOST
                               drop

sample operations
  ip link add tapa type gretap remote 172.17.107.4 local 172.17.107.3
  ip link add tapb type gretap remote 172.17.107.3 local 172.17.107.4
  ip link set tapa up
  ip link set tapb up
  ip address add 172.17.107.3 dev tapa
  ip address add 172.17.107.4 dev tapb
  ip route get 172.17.107.3
  > local 172.17.107.3 dev lo  src 172.17.107.3
  >    cache <local>
  ip route get 172.17.107.4
  > local 172.17.107.4 dev lo  src 172.17.107.4
  >    cache <local>
  ip link add vetha type veth peer name vetha-peer
  ip link add vethb type veth peer name vethb-peer
  brctl addbr bra
  brctl addbr brb
  brctl addif bra tapa
  brctl addif bra vetha-peer
  brctl addif brb tapb
  brctl addif brb vethb-peer
  brctl show
  > bridge name     bridge id               STP enabled     interfaces
  > bra             8000.6ea21e758ff1       no              tapa
  >                                                         vetha-peer
  > brb             8000.420020eb92d5       no              tapb
  >                                                         vethb-peer
  ip link set vetha-peer up
  ip link set vethb-peer up
  ip link set bra up
  ip link set brb up
  ip netns add a
  ip netns add b
  ip link set vetha netns a
  ip link set vethb netns b
  ip netns exec a ip address add 10.0.0.3/24 dev vetha
  ip netns exec b ip address add 10.0.0.4/24 dev vethb
  ip netns exec a ip link set vetha up
  ip netns exec b ip link set vethb up
  ip netns exec a arping -I vetha 10.0.0.4
  ARPING 10.0.0.4 from 10.0.0.3 vetha
  ^CSent 2 probes (2 broadcast(s))
  Received 0 response(s)

Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Hong Zhiguo <honkiko@gmail.com>
Cc: Rami Rosen <ramirose@gmail.com>
Cc: Tom Parkin <tparkin@katalix.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Pravin B Shelar <pshelar@nicira.com>
Cc: Jesse Gross <jesse@nicira.com>
Cc: dev@openvswitch.org
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

Time in range will fail safely if we move to a different cpu with an
extremely large clock skew.
Add time_in_range64() and convert lls to use it.

changelog:
v2
- fixed double call to sched_clock in can_poll_ll
- fixed checkpatchisms
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is not nice when netdev is created right after module load and with
some implicit name. So rather change nlmon to use standard rtnl link API.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the socket had an IPV6_MTU value set, ip6_append_data_mtu lost track
of this when appending the second frame on a corked socket. This results
in the following splat:

[37598.993962] ------------[ cut here ]------------
[37598.994008] kernel BUG at net/core/skbuff.c:2064!
[37598.994008] invalid opcode: 0000 [#1] SMP
[37598.994008] Modules linked in: tcp_lp uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media vfat fat usb_storage fuse ebtable_nat xt_CHECKSUM bridge stp llc ipt_MASQUERADE nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat
+nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi
+scsi_transport_iscsi rfcomm bnep iTCO_wdt iTCO_vendor_support snd_hda_codec_conexant arc4 iwldvm mac80211 snd_hda_intel acpi_cpufreq mperf coretemp snd_hda_codec microcode cdc_wdm cdc_acm
[37598.994008]  snd_hwdep cdc_ether snd_seq snd_seq_device usbnet mii joydev btusb snd_pcm bluetooth i2c_i801 e1000e lpc_ich mfd_core ptp iwlwifi pps_core snd_page_alloc mei cfg80211 snd_timer thinkpad_acpi snd tpm_tis soundcore rfkill tpm tpm_bios vhost_net tun macvtap macvlan kvm_intel kvm uinput binfmt_misc
+dm_crypt i915 i2c_algo_bit drm_kms_helper drm i2c_core wmi video
[37598.994008] CPU 0
[37598.994008] Pid: 27320, comm: t2 Not tainted 3.9.6-200.fc18.x86_64 #1 LENOVO 27744PG/27744PG
[37598.994008] RIP: 0010:[<ffffffff815443a5>]  [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330
[37598.994008] RSP: 0018:ffff88003670da18  EFLAGS: 00010202
[37598.994008] RAX: ffff88018105c018 RBX: 0000000000000004 RCX: 00000000000006c0
[37598.994008] RDX: ffff88018105a6c0 RSI: ffff88018105a000 RDI: ffff8801e1b0aa00
[37598.994008] RBP: ffff88003670da78 R08: 0000000000000000 R09: ffff88018105c040
[37598.994008] R10: ffff8801e1b0aa00 R11: 0000000000000000 R12: 000000000000fff8
[37598.994008] R13: 00000000000004fc R14: 00000000ffff0504 R15: 0000000000000000
[37598.994008] FS:  00007f28eea59740(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000
[37598.994008] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[37598.994008] CR2: 0000003d935789e0 CR3: 00000000365cb000 CR4: 00000000000407f0
[37598.994008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[37598.994008] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[37598.994008] Process t2 (pid: 27320, threadinfo ffff88003670c000, task ffff88022c162ee0)
[37598.994008] Stack:
[37598.994008]  ffff88022e098a00 ffff88020f973fc0 0000000000000008 00000000000004c8
[37598.994008]  ffff88020f973fc0 00000000000004c4 ffff88003670da78 ffff8801e1b0a200
[37598.994008]  0000000000000018 00000000000004c8 ffff88020f973fc0 00000000000004c4
[37598.994008] Call Trace:
[37598.994008]  [<ffffffff815fc21f>] ip6_append_data+0xccf/0xfe0
[37598.994008]  [<ffffffff8158d9f0>] ? ip_copy_metadata+0x1a0/0x1a0
[37598.994008]  [<ffffffff81661f66>] ? _raw_spin_lock_bh+0x16/0x40
[37598.994008]  [<ffffffff8161548d>] udpv6_sendmsg+0x1ed/0xc10
[37598.994008]  [<ffffffff812a2845>] ? sock_has_perm+0x75/0x90
[37598.994008]  [<ffffffff815c3693>] inet_sendmsg+0x63/0xb0
[37598.994008]  [<ffffffff812a2973>] ? selinux_socket_sendmsg+0x23/0x30
[37598.994008]  [<ffffffff8153a450>] sock_sendmsg+0xb0/0xe0
[37598.994008]  [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0
[37598.994008]  [<ffffffff8153d97d>] sys_sendto+0x12d/0x180
[37598.994008]  [<ffffffff810dfb64>] ? __audit_syscall_entry+0x94/0xf0
[37598.994008]  [<ffffffff81020ed1>] ? syscall_trace_enter+0x231/0x240
[37598.994008]  [<ffffffff8166a7e7>] tracesys+0xdd/0xe2
[37598.994008] Code: fe 07 00 00 48 c7 c7 04 28 a6 81 89 45 a0 4c 89 4d b8 44 89 5d a8 e8 1b ac b1 ff 44 8b 5d a8 4c 8b 4d b8 8b 45 a0 e9 cf fe ff ff <0f> 0b 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 48
[37598.994008] RIP  [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330
[37598.994008]  RSP <ffff88003670da18>
[37599.007323] ---[ end trace d69f6a17f8ac8eee ]---

While there, also check if path mtu discovery is activated for this
socket. The logic was adapted from ip6_append_data when first writing
on the corked socket.

This bug was introduced with commit
0c183379 ("ipv6: fix incorrect ipsec
fragment").

v2:
a) Replace IPV6_PMTU_DISC_DO with IPV6_PMTUDISC_PROBE.
b) Don't pass ipv6_pinfo to ip6_append_data_mtu (suggestion by Gao
   feng, thanks!).
c) Change mtu to unsigned int, else we get a warning about
   non-matching types because of the min()-macro type-check.
Acked-by: Gao feng <gaofeng@cn.fujitsu.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We accidentally call down to ip6_push_pending_frames when uncorking
pending AF_INET data on a ipv6 socket. This results in the following
splat (from Dave Jones):

skbuff: skb_under_panic: text:ffffffff816765f6 len:48 put:40 head:ffff88013deb6df0 data:ffff88013deb6dec tail:0x2c end:0xc0 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:126!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in: dccp_ipv4 dccp 8021q garp bridge stp dlci mpoa snd_seq_dummy sctp fuse hidp tun bnep nfnetlink scsi_transport_iscsi rfcomm can_raw can_bcm af_802154 appletalk caif_socket can caif ipt_ULOG x25 rose af_key pppoe pppox ipx phonet irda llc2 ppp_generic slhc p8023 psnap p8022 llc crc_ccitt atm bluetooth
+netrom ax25 nfc rfkill rds af_rxrpc coretemp hwmon kvm_intel kvm crc32c_intel snd_hda_codec_realtek ghash_clmulni_intel microcode pcspkr snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep usb_debug snd_seq snd_seq_device snd_pcm e1000e snd_page_alloc snd_timer ptp snd pps_core soundcore xfs libcrc32c
CPU: 2 PID: 8095 Comm: trinity-child2 Not tainted 3.10.0-rc7+ #37
task: ffff8801f52c2520 ti: ffff8801e6430000 task.ti: ffff8801e6430000
RIP: 0010:[<ffffffff816e759c>]  [<ffffffff816e759c>] skb_panic+0x63/0x65
RSP: 0018:ffff8801e6431de8  EFLAGS: 00010282
RAX: 0000000000000086 RBX: ffff8802353d3cc0 RCX: 0000000000000006
RDX: 0000000000003b90 RSI: ffff8801f52c2ca0 RDI: ffff8801f52c2520
RBP: ffff8801e6431e08 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022ea0c800
R13: ffff88022ea0cdf8 R14: ffff8802353ecb40 R15: ffffffff81cc7800
FS:  00007f5720a10740(0000) GS:ffff880244c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000005862000 CR3: 000000022843c000 CR4: 00000000001407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
Stack:
 ffff88013deb6dec 000000000000002c 00000000000000c0 ffffffff81a3f6e4
 ffff8801e6431e18 ffffffff8159a9aa ffff8801e6431e90 ffffffff816765f6
 ffffffff810b756b 0000000700000002 ffff8801e6431e40 0000fea9292aa8c0
Call Trace:
 [<ffffffff8159a9aa>] skb_push+0x3a/0x40
 [<ffffffff816765f6>] ip6_push_pending_frames+0x1f6/0x4d0
 [<ffffffff810b756b>] ? mark_held_locks+0xbb/0x140
 [<ffffffff81694919>] udp_v6_push_pending_frames+0x2b9/0x3d0
 [<ffffffff81694660>] ? udplite_getfrag+0x20/0x20
 [<ffffffff8162092a>] udp_lib_setsockopt+0x1aa/0x1f0
 [<ffffffff811cc5e7>] ? fget_light+0x387/0x4f0
 [<ffffffff816958a4>] udpv6_setsockopt+0x34/0x40
 [<ffffffff815949f4>] sock_common_setsockopt+0x14/0x20
 [<ffffffff81593c31>] SyS_setsockopt+0x71/0xd0
 [<ffffffff816f5d54>] tracesys+0xdd/0xe2
Code: 00 00 48 89 44 24 10 8b 87 d8 00 00 00 48 89 44 24 08 48 8b 87 e8 00 00 00 48 c7 c7 c0 04 aa 81 48 89 04 24 31 c0 e8 e1 7e ff ff <0f> 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55
RIP  [<ffffffff816e759c>] skb_panic+0x63/0x65
 RSP <ffff8801e6431de8>

This patch adds a check if the pending data is of address family AF_INET
and directly calls udp_push_ending_frames from udp_v6_push_pending_frames
if that is the case.

This bug was found by Dave Jones with trinity.

(Also move the initialization of fl6 below the AF_INET check, even if
not strictly necessary.)

Cc: Dave Jones <davej@redhat.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 38ae92dc "fec: Add support for reading
RMON registers" causes the imx6Q to crash.

This fixes it by only enabling the RMON registers, the
registers are already cleared by the MAC being reset.
Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When exercising error injection on IBM pseries machine, I hit the
following warning:

[  251.450043] RTAS: event: 89, Type: Platform Error, Severity: 2
[  253.549822] cxgb3 0006:01:00.0: enabling device (0140 -> 0142)
[  253.713560] cxgb3 0006:01:00.0: adapter recovering, PEX ERR 0x100
[  254.895437] RTNL: assertion failed at net/core/dev.c (2031)
[  254.895467] CPU: 6 PID: 5449 Comm: eehd Tainted: G        W    3.10.0-rc7-00157-gea461abf #19
[  254.895474] Call Trace:
[  254.895483] [c000000fac56f7d0] [c000000000014dcc] .show_stack+0x7c/0x1f0 (unreliable)
[  254.895493] [c000000fac56f8a0] [c0000000007ba318] .dump_stack+0x28/0x3c
[  254.895500] [c000000fac56f910] [c0000000006c0384] .netif_set_real_num_tx_queues+0x224/0x230
[  254.895515] [c000000fac56f9b0] [d00000000ef35510] .cxgb_open+0x80/0x3f0 [cxgb3]
[  254.895525] [c000000fac56fa50] [d00000000ef35914] .t3_resume_ports+0x94/0x100 [cxgb3]
[  254.895533] [c000000fac56fae0] [c00000000005fc8c] .eeh_report_resume+0x8c/0xd0
[  254.895539] [c000000fac56fb60] [c00000000005e9fc] .eeh_pe_dev_traverse+0x9c/0x190
[  254.895545] [c000000fac56fc10] [c000000000060000] .eeh_handle_event+0x110/0x330
[  254.895551] [c000000fac56fca0] [c000000000060350] .eeh_event_handler+0x130/0x1a0
[  254.895558] [c000000fac56fd30] [c0000000000ad758] .kthread+0xe8/0xf0
[  254.895566] [c000000fac56fe30] [c00000000000a05c] .ret_from_kernel_thread+0x5c/0x80

It appears that t3_resume_ports() is called with the rtnl_lock held from
the fatal error task but not from the PCI error callbacks. This fixes it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some Icera based Huawei modems handled by this driver are not
completely CDC ECM compliant, using the same USB interface for both
control and data. The CDC functional descriptors include a Union
naming this interface as both master and slave, so it is supportable
by relaxing the descriptor parsing in case these interfaces are
identical.

This has been tested on a Huawei K3806 and verified to add support
for that device.
Reported-and-tested-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The tx_bytes field was not being updated so the
network card statistics showed 0.0B transmitted.
Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a regression introduced by
commit fd58156e (IPIP: Use ip-tunneling code.)

Similar to GRE tunnel, previously we only check the parameters
for SIOCADDTUNNEL and SIOCCHGTUNNEL, after that commit, the
check is moved for all commands.

So, just check for SIOCADDTUNNEL and SIOCCHGTUNNEL.

Also, the check for i_key, o_key etc. is suspicious too,
which did not exist before, reset them before passing
to ip_tunnel_ioctl().

Cc: Pravin B Shelar <pshelar@nicira.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add missing .owner of struct pppox_proto. This prevents the
module from being removed from underneath its users.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert one printk to pr_<level>.

Add a missing newline in several places to avoid message interleaving,
coalesce formats, reflow modified lines to 80 columns.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes the fib_update_nh_saddrs() declaration from
include/net/ip_fib.h, as the fib_update_nh_saddrs() method was removed in
coomit 436c3b66 ("ipv4: Invalidate nexthop cache nh_saddr more correctly").
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds the USB device ID (0x12ab) to the ipheth network-over-USB-tethering
driver for iOS devices.  Applied and tested against mainline tag v3.10
(as well as 3.8.x and 3.6.y kernel for Raspbian on Raspberry pi)
Signed-off-by: Aaron Marburg <amarburg@notetofutureself.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The header file checksum.h is missing proper defines that prevents
it from double inclusion.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The TPACKET_V3 test code consists of a lot of unecessary macro
wrappers that rather obfuscate what members are accessed in what
way. So get rid of them and make the code more readable. Also
credit Chetan for providing tpacket_v3 example code. Furthermore,
get rid of private offset usage, as we do not need it here.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As the patch "bnx2x: remove zeroing of dump data buffer" showed,
it is too easy implement .get_dump_data incorrectly in a driver.

Let's make sure drivers cannot get confused by userspace requesting
a too big dump.

Also WARN if the driver sets dump->len to something weird and make
sure the length reported to userspace is the actual length of data
copied to userspace.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x did not set dump->version in its .get_dump_flag() method.
Let's set it to BNX2X_DUMP_VERSION. It's not a particularly nice
number (0x50acff01 currently), but at least it's something
deterministic.

dump->flag should report the value previously set using ethtool -W.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x interprets the dump flag as an index of a register preset.
It is important to validate the index to avoid out of bounds
memory accesses.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need to initialize the dump data with zeros.
data is allocated with vzalloc, so it's already zero-filled.

More importantly, the memset is harmful, because dump->len (the length
requested by userspace) can be bigger than the allocated buffer (whose
size is determined by asking the driver's .get_dump_flag method).
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>