- 21 Nov, 2014 40 commits
-
-
Simon Horman authored
commit aa1cf258 upstream. Unlike other SATA R-Car r8a7790 controllers the r8a7790 ES1 SATA R-Car controller needs to be run with DIPM disabled. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Richter authored
commit eaca2d8e upstream. Found by the UC-KLEE tool: A user could supply less input to firewire-cdev ioctls than write- or write/read-type ioctl handlers expect. The handlers used data from uninitialized kernel stack then. This could partially leak back to the user if the kernel subsequently generated fw_cdev_event_'s (to be read from the firewire-cdev fd) which notably would contain the _u64 closure field which many of the ioctl argument structures contain. The fact that the handlers would act on random garbage input is a lesser issue since all handlers must check their input anyway. The fix simply always null-initializes the entire ioctl argument buffer regardless of the actual length of expected user input. That is, a runtime overhead of memset(..., 40) is added to each firewirew-cdev ioctl() call. [Comment from Clemens Ladisch: This part of the stack is most likely to be already in the cache.] Remarks: - There was never any leak from kernel stack to the ioctl output buffer itself. IOW, it was not possible to read kernel stack by a read-type or write/read-type ioctl alone; the leak could at most happen in combination with read()ing subsequent event data. - The actual expected minimum user input of each ioctl from include/uapi/linux/firewire-cdev.h is, in bytes: [0x00] = 32, [0x05] = 4, [0x0a] = 16, [0x0f] = 20, [0x14] = 16, [0x01] = 36, [0x06] = 20, [0x0b] = 4, [0x10] = 20, [0x15] = 20, [0x02] = 20, [0x07] = 4, [0x0c] = 0, [0x11] = 0, [0x16] = 8, [0x03] = 4, [0x08] = 24, [0x0d] = 20, [0x12] = 36, [0x17] = 12, [0x04] = 20, [0x09] = 24, [0x0e] = 4, [0x13] = 40, [0x18] = 4. Reported-by:
David Ramos <daramos@stanford.edu> Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Mark Rutland authored
commit 9b0b2658 upstream. While efi-entry.S mentions that efi_entry() will have relocated the kernel image, it actually means that efi_entry will have placed a copy of the kernel in the appropriate location, and until this is branched to at the end of efi_entry.S, all instructions are executed from the original image. Thus while the flush in efi_entry.S does ensure that the copy is visible to noncacheable accesses, it does not guarantee that this is true for the image instructions are being executed from. This could have disasterous effects when the MMU and caches are disabled if the image has not been naturally evicted to the PoC. Additionally, due to a missing dsb following the ic ialluis, the new kernel image is not necessarily clean in the I-cache when it is branched to, with similar potentially disasterous effects. This patch adds additional flushing to ensure that the currently executing stub text is flushed to the PoC and is thus visible to noncacheable accesses. As it is placed after the instructions cache maintenance for the new image and __flush_dcache_area already contains a dsb, we do not need to add a separate barrier to ensure completion of the icache maintenance. Comments are updated to clarify the situation with regard to the two images and the maintenance required for both. Fixes: 3c7f2550Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
Joel Schopp <joel.schopp@amd.com> Reviewed-by:
Roy Franz <roy.franz@linaro.org> Tested-by:
Tom Lendacky <thomas.lendacky@amd.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Mark Salter <msalter@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Kyle McMartin authored
commit 97fc1543 upstream. ARM64 currently doesn't fix up faults on the single-byte (strb) case of __clear_user... which means that we can cause a nasty kernel panic as an ordinary user with any multiple PAGE_SIZE+1 read from /dev/zero. i.e.: dd if=/dev/zero of=foo ibs=1 count=1 (or ibs=65537, etc.) This is a pretty obscure bug in the general case since we'll only __do_kernel_fault (since there's no extable entry for pc) if the mmap_sem is contended. However, with CONFIG_DEBUG_VM enabled, we'll always fault. if (!down_read_trylock(&mm->mmap_sem)) { if (!user_mode(regs) && !search_exception_tables(regs->pc)) goto no_context; retry: down_read(&mm->mmap_sem); } else { /* * The above down_read_trylock() might have succeeded in * which * case, we'll have missed the might_sleep() from * down_read(). */ might_sleep(); if (!user_mode(regs) && !search_exception_tables(regs->pc)) goto no_context; } Fix that by adding an extable entry for the strb instruction, since it touches user memory, similar to the other stores in __clear_user. Signed-off-by:
Kyle McMartin <kyle@redhat.com> Reported-by:
Miloš Prchlík <mprchlik@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit c822ed96 upstream. Avoids normal IO racing with discard. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Paul Mackerras authored
commit ad0eab92 upstream. The branches of the if (i->type & ITER_BVEC) statement in iov_iter_single_seg_count() are the wrong way around; if ITER_BVEC is clear then we use i->bvec, when we should be using i->iov. This fixes it. In my case, the symptom that this caused was that a KVM guest doing filesystem operations on a virtual disk would result in one of qemu's threads on the host going into an infinite loop in generic_perform_write(). The loop would hit the copied == 0 case and call iov_iter_single_seg_count() to reduce the number of bytes to try to process, but because of the error, iov_iter_single_seg_count() would just return i->count and the loop made no progress and continued forever. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Roger Quadros authored
commit 73b3a665 upstream. For PIN_OUTPUT_PULLUP and PIN_OUTPUT_PULLDOWN we must not set the PULL_DIS bit which disables the PULLs. PULL_ENA is a 0 and using it in an OR operation is a NOP, so don't use it in the PIN_OUTPUT_PULLUP/DOWN macros. Fixes: 23d9cec0 ("pinctrl: dra: dt-bindings: Fix pull enable/disable") Signed-off-by:
Roger Quadros <rogerq@ti.com> Acked-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Andrew Lunn authored
commit 5129ee22 upstream. A second product has come to light which makes use of the A0 stepping of the Armada XP SoC. A0 stepping has a hardware bug in the i2c core meaning that hardware offload does not work, resulting in the kernel failing to boot. The quirk detects that the kernel is running on an A0 stepping SoC and disables the use of hardware offload. Currently the quirk is only enabled for PlatHome Openblocks AX3. The AX3 has been produced with both A0 and B0 stepping SoCs. The second product is the Lenovo Iomega IX4-300d. It seems likely that this device will also swap from A0 to B0 SoC sometime during its life. If there are two products using A0, it seems likely there are more products with A0. Also, since the number of A0 SoCs is limited, these products are also likely to transition to B0. Hence detecting at run time is the safest option. So enable the quirk for all Armada XP boards. Tested on an AX3 with A0 stepping. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Fixes: 930ab3d4: ("i2c: mv64xxx: Add I2C Transaction Generator support") Link: https://lkml.kernel.org/r/1406395238-29758-2-git-send-email-andrew@lunn.chSigned-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Roger Quadros authored
commit a8ead0ec upstream. The 5th NAND partition should be named "NAND.u-boot-spl-os" instead of "NAND.u-boot-spl". This is to be consistent with other TI boards as well as u-boot. Fixes: 91994fac ("ARM: dts: am335x-evm: NAND: update MTD partition table") Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Will Deacon authored
commit 238962ac upstream. To speed up decompression, the decompressor sets up a flat, cacheable mapping of memory. However, when there is insufficient space to hold the page tables for this mapping, we don't bother to enable the caches and subsequently skip all the cache maintenance hooks. Skipping the cache maintenance before jumping to the relocated code allows the processor to predict the branch and populate the I-cache with stale data before the relocation loop has completed (since a bootloader may have SCTLR.I set, which permits normal, cacheable instruction fetches regardless of SCTLR.M). This patch moves the cache maintenance check into the maintenance routines themselves, allowing the v6/v7 versions to invalidate the I-cache regardless of the MMU state. Reported-by:
Marc Carino <marc.ceeeee@gmail.com> Tested-by:
Julien Grall <julien.grall@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Nathan Lynch authored
commit 08b964ff upstream. The kuser helpers page is not set up on non-MMU systems, so it does not make sense to allow CONFIG_KUSER_HELPERS to be enabled when CONFIG_MMU=n. Allowing it to be set on !MMU results in an oops in set_tls (used in execve and the arm_syscall trap handler): Unhandled exception: IPSR = 00000005 LR = fffffff1 CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc1-00041-ga30465a #216 task: 8b838000 ti: 8b82a000 task.ti: 8b82a000 PC is at flush_thread+0x32/0x40 LR is at flush_thread+0x21/0x40 pc : [<8f00157a>] lr : [<8f001569>] psr: 4100000b sp : 8b82be20 ip : 00000000 fp : 8b83c000 r10: 00000001 r9 : 88018c84 r8 : 8bb85000 r7 : 8b838000 r6 : 00000000 r5 : 8bb77400 r4 : 8b82a000 r3 : ffff0ff0 r2 : 8b82a000 r1 : 00000000 r0 : 88020354 xPSR: 4100000b CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc1-00041-ga30465a #216 [<8f002bc1>] (unwind_backtrace) from [<8f002033>] (show_stack+0xb/0xc) [<8f002033>] (show_stack) from [<8f00265b>] (__invalid_entry+0x4b/0x4c) As best I can tell this issue existed for the set_tls ARM syscall before commit fbfb872f "ARM: 8148/1: flush TLS and thumbee register state during exec" consolidated the TLS manipulation code into the set_tls helper function, but now that we're using it to flush register state during execve, !MMU users encounter the oops at the first exec. Prevent CONFIG_MMU=n configurations from enabling CONFIG_KUSER_HELPERS. Fixes: fbfb872f (ARM: 8148/1: flush TLS and thumbee register state during exec) Signed-off-by:
Nathan Lynch <nathan_lynch@mentor.com> Reported-by:
Stefan Agner <stefan@agner.ch> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Dave Airlie authored
commit 1c949842 upstream. While developing MST support I noticed I often got the wrong data back from a transaction, in a racy fashion. I noticed the scratch space wasn't locked against concurrent users. Based on a patch by Alex, but I've made it a bit more obvious when things are locked. Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit f0d7bfb9 upstream. Need to unlock the crtc after updating the blanking state. Signed-off-by:
-
Alex Deucher authored
commit 0b021c58 upstream. Use gart rather than vram to avoid having to deal with the HDP cache. Port of adfed2b0 (drm/radeon: use gart memory for DMA ring tests) to the IB tests. Signed-off-by:
-
Alex Deucher authored
commit 8efe82ca upstream. The power management code calls into the display code for certain things. If certain power management sysfs attributes are called before the driver has finished initializing all of the hardware we can run into problems with uninitialized modesetting state. Add a check to make sure modesetting init has completed to the bandwidth update callbacks to fix this. Can be triggered by the tlp and laptop start up scripts depending on the timing. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=83611 https://bugs.freedesktop.org/show_bug.cgi?id=85771Signed-off-by:
-
Jammy Zhou authored
commit dc4edad6 upstream. CE ram size is 32k/0k/0k for GFX/CS0/CS1 with CIK Ported from amdgpu driver. Signed-off-by:
Jammy Zhou <Jammy.Zhou@amd.com> Signed-off-by:
-
Jani Nikula authored
commit 7809a611 upstream. Ivybridge + 30" monitor prints a drm error on every modeset, since IVB doesn't support DP3 we should even bother trying to use it. This regression has been introduced in commit 06ea66b6 Author: Todd Previte <tprevite@gmail.com> Date: Mon Jan 20 10:19:39 2014 -0700 drm/i915: Enable 5.4Ghz (HBR2) link rate for Displayport 1.2-capable devices Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
commit d6a8b72e upstream. Global GTT doesn't have pat_sel[2:0] so it always point to pat_sel = 000; So the only way to avoid screen corruptions is setting PAT 0 to Uncached. MOCS can still be used though. But if userspace is trusting PTE for cache selection the safest thing to do is to let caches disabled. BSpec: "For GGTT, there is NO pat_sel[2:0] from the entry, so RTL will always use the value corresponding to pat_sel = 000" - System agent ggtt writes (i.e. cpu gtt mmaps) already work before this patch, i.e. the same uncached + snooping access like on gen6/7 seems to be in effect. - So this just fixes blitter/render access. Again it looks like it's not just uncached access, but uncached + snooping. So we can still hold onto all our assumptions wrt cpu clflushing on LLC machines. v2: Cleaner patch as suggested by Chris. v3: Add Daniel's comment Reference: https://bugs.freedesktop.org/show_bug.cgi?id=85576 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: James Ausmus <james.ausmus@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Tested-by:
James Ausmus <james.ausmus@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Jani Nikula authored
commit e1c412e7 upstream. Never trust (your interpretation of) the VBT. Regression from commit 6dda730e Author: Jani Nikula <jani.nikula@intel.com> Date: Tue Jun 24 18:27:40 2014 +0300 drm/i915: respect the VBT minimum backlight brightness causing div by zero if VBT minimum brightness equals maximum brightness. Despite my attempts I've failed in my detective work to figure out what the root cause is. This is not the real fix, but we have to do something. Reported-by:
Mike Auty <mike.auty@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=86551Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Johannes Berg authored
commit b8fff407 upstream. Upon receiving the last fragment, all but the first fragment are freed, but the multicast check for statistics at the end of the function refers to the current skb (the last fragment) causing a use-after-free bug. Since multicast frames cannot be fragmented and we check for this early in the function, just modify that check to also do the accounting to fix the issue. Reported-by:
Yosef Khyal <yosefx.khyal@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Luciano Coelho authored
commit ff1e417c upstream. Due to the time it takes to process the beacon that started the CSA process, we may be late for the switch if we try to reach exactly beacon 0. To avoid that, use count - 1 when calculating the switch time. Reported-by:
Jouni Malinen <j@w1.fi> Signed-off-by:
Luciano Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Luciano Coelho authored
commit 84469a45 upstream. If we are switching from an HT40+ to an HT40- channel (or vice-versa), we need the secondary channel offset IE to specify what is the post-CSA offset to be used. This applies both to beacons and to probe responses. In ieee80211_parse_ch_switch_ie() we were ignoring this IE from beacons and using the *current* HT information IE instead. This was causing us to use the same offset as before the switch. Fix that by using the secondary channel offset IE also for beacons and don't ever use the pre-switch offset. Additionally, remove the "beacon" argument from ieee80211_parse_ch_switch_ie(), since it's not needed anymore. Reported-by:
-
Johannes Berg authored
commit 46238845 upstream. When an interface is deleted, an ongoing hardware scan is canceled and the driver must abort the scan, at the very least reporting completion while the interface is removed. However, if it scheduled the work that might only run after everything is said and done, which leads to cfg80211 warning that the scan isn't reported as finished yet; this is no fault of the driver, it already did, but mac80211 hasn't processed it. To fix this situation, flush the delayed work when the interface being removed is the one that was executing the scan. Reported-by:
Sujith Manoharan <sujith@msujith.org> Tested-by:
-
Junjie Mao authored
commit 805dbe17 upstream. The driver is not released when ieee80211_register_hw fails in mac80211_hwsim_create_radio, leading to the access to the unregistered (and possibly freed) device in platform_driver_unregister: [ 0.447547] mac80211_hwsim: ieee80211_register_hw failed (-2) [ 0.448292] ------------[ cut here ]------------ [ 0.448854] WARNING: CPU: 0 PID: 1 at ../include/linux/kref.h:47 kobject_get+0x33/0x50() [ 0.449839] CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-00001-gdd46990-dirty #2 [ 0.450813] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.451512] 00000000 00000000 78025e38 7967c6c6 78025e68 7905e09b 7988b480 00000000 [ 0.452579] 00000001 79887d62 0000002f 79170bb3 79170bb3 78397008 79ac9d74 00000001 [ 0.453614] 78025e78 7905e15d 00000009 00000000 78025e84 79170bb3 78397000 78025e8c [ 0.454632] Call Trace: [ 0.454921] [<7967c6c6>] dump_stack+0x16/0x18 [ 0.455453] [<7905e09b>] warn_slowpath_common+0x6b/0x90 [ 0.456067] [<79170bb3>] ? kobject_get+0x33/0x50 [ 0.456612] [<79170bb3>] ? kobject_get+0x33/0x50 [ 0.457155] [<7905e15d>] warn_slowpath_null+0x1d/0x20 [ 0.457748] [<79170bb3>] kobject_get+0x33/0x50 [ 0.458274] [<7925824f>] get_device+0xf/0x20 [ 0.458779] [<7925b5cd>] driver_detach+0x3d/0xa0 [ 0.459331] [<7925a3ff>] bus_remove_driver+0x8f/0xb0 [ 0.459927] [<7925bf80>] ? class_unregister+0x40/0x80 [ 0.460660] [<7925bad7>] driver_unregister+0x47/0x50 [ 0.461248] [<7925c033>] ? class_destroy+0x13/0x20 [ 0.461824] [<7925d07b>] platform_driver_unregister+0xb/0x10 [ 0.462507] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9 [ 0.463161] [<79b30c58>] do_one_initcall+0x106/0x1a9 [ 0.463758] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.464393] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.465001] [<79071935>] ? parse_args+0x2f5/0x480 [ 0.465569] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 0.466345] [<79b30dd9>] kernel_init_freeable+0xde/0x17d [ 0.466972] [<79b304d6>] ? do_early_param+0x7a/0x7a [ 0.467546] [<79677b1b>] kernel_init+0xb/0xe0 [ 0.468072] [<79075f42>] ? schedule_tail+0x12/0x40 [ 0.468658] [<79686580>] ret_from_kernel_thread+0x20/0x30 [ 0.469303] [<79677b10>] ? rest_init+0xc0/0xc0 [ 0.469829] ---[ end trace ad8ac403ff8aef5c ]--- [ 0.470509] ------------[ cut here ]------------ [ 0.471047] WARNING: CPU: 0 PID: 1 at ../kernel/locking/lockdep.c:3161 __lock_acquire.isra.22+0x7aa/0xb00() [ 0.472163] DEBUG_LOCKS_WARN_ON(id >= MAX_LOCKDEP_KEYS) [ 0.472774] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.17.0-00001-gdd46990-dirty #2 [ 0.473815] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.474492] 78025de0 78025de0 78025da0 7967c6c6 78025dd0 7905e09b 79888931 78025dfc [ 0.475515] 00000001 79888a93 00000c59 7907f33a 7907f33a 78028000 fffe9d09 00000000 [ 0.476519] 78025de8 7905e10e 00000009 78025de0 79888931 78025dfc 78025e24 7907f33a [ 0.477523] Call Trace: [ 0.477821] [<7967c6c6>] dump_stack+0x16/0x18 [ 0.478352] [<7905e09b>] warn_slowpath_common+0x6b/0x90 [ 0.478976] [<7907f33a>] ? __lock_acquire.isra.22+0x7aa/0xb00 [ 0.479658] [<7907f33a>] ? __lock_acquire.isra.22+0x7aa/0xb00 [ 0.480417] [<7905e10e>] warn_slowpath_fmt+0x2e/0x30 [ 0.480479] [<7907f33a>] __lock_acquire.isra.22+0x7aa/0xb00 [ 0.480479] [<79078aa5>] ? sched_clock_cpu+0xb5/0xf0 [ 0.480479] [<7907fd06>] lock_acquire+0x56/0x70 [ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.480479] [<79682d11>] mutex_lock_nested+0x61/0x2a0 [ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.480479] [<7925b5e8>] driver_detach+0x58/0xa0 [ 0.480479] [<7925a3ff>] bus_remove_driver+0x8f/0xb0 [ 0.480479] [<7925bf80>] ? class_unregister+0x40/0x80 [ 0.480479] [<7925bad7>] driver_unregister+0x47/0x50 [ 0.480479] [<7925c033>] ? class_destroy+0x13/0x20 [ 0.480479] [<7925d07b>] platform_driver_unregister+0xb/0x10 [ 0.480479] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9 [ 0.480479] [<79b30c58>] do_one_initcall+0x106/0x1a9 [ 0.480479] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.480479] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.480479] [<79071935>] ? parse_args+0x2f5/0x480 [ 0.480479] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 0.480479] [<79b30dd9>] kernel_init_freeable+0xde/0x17d [ 0.480479] [<79b304d6>] ? do_early_param+0x7a/0x7a [ 0.480479] [<79677b1b>] kernel_init+0xb/0xe0 [ 0.480479] [<79075f42>] ? schedule_tail+0x12/0x40 [ 0.480479] [<79686580>] ret_from_kernel_thread+0x20/0x30 [ 0.480479] [<79677b10>] ? rest_init+0xc0/0xc0 [ 0.480479] ---[ end trace ad8ac403ff8aef5d ]--- [ 0.495478] BUG: unable to handle kernel paging request at 00200200 [ 0.496257] IP: [<79682de5>] mutex_lock_nested+0x135/0x2a0 [ 0.496923] *pde = 00000000 [ 0.497290] Oops: 0002 [#1] [ 0.497653] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.17.0-00001-gdd46990-dirty #2 [ 0.498659] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.499321] task: 78028000 ti: 78024000 task.ti: 78024000 [ 0.499955] EIP: 0060:[<79682de5>] EFLAGS: 00010097 CPU: 0 [ 0.500620] EIP is at mutex_lock_nested+0x135/0x2a0 [ 0.501145] EAX: 00200200 EBX: 78397434 ECX: 78397460 EDX: 78025e70 [ 0.501816] ESI: 00000246 EDI: 78028000 EBP: 78025e8c ESP: 78025e54 [ 0.502497] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 [ 0.503076] CR0: 8005003b CR2: 00200200 CR3: 01b9d000 CR4: 00000690 [ 0.503773] Stack: [ 0.503998] 00000000 00000001 00000000 7925b5e8 78397460 7925b5e8 78397474 78397460 [ 0.504944] 00200200 11111111 78025e70 78397000 79ac9d74 00000001 78025ea0 7925b5e8 [ 0.505451] 79ac9d74 fffffffe 00000001 78025ebc 7925a3ff 7a251398 78025ec8 7925bf80 [ 0.505451] Call Trace: [ 0.505451] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.505451] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.505451] [<7925b5e8>] driver_detach+0x58/0xa0 [ 0.505451] [<7925a3ff>] bus_remove_driver+0x8f/0xb0 [ 0.505451] [<7925bf80>] ? class_unregister+0x40/0x80 [ 0.505451] [<7925bad7>] driver_unregister+0x47/0x50 [ 0.505451] [<7925c033>] ? class_destroy+0x13/0x20 [ 0.505451] [<7925d07b>] platform_driver_unregister+0xb/0x10 [ 0.505451] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9 [ 0.505451] [<79b30c58>] do_one_initcall+0x106/0x1a9 [ 0.505451] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.505451] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.505451] [<79071935>] ? parse_args+0x2f5/0x480 [ 0.505451] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 0.505451] [<79b30dd9>] kernel_init_freeable+0xde/0x17d [ 0.505451] [<79b304d6>] ? do_early_param+0x7a/0x7a [ 0.505451] [<79677b1b>] kernel_init+0xb/0xe0 [ 0.505451] [<79075f42>] ? schedule_tail+0x12/0x40 [ 0.505451] [<79686580>] ret_from_kernel_thread+0x20/0x30 [ 0.505451] [<79677b10>] ? rest_init+0xc0/0xc0 [ 0.505451] Code: 89 d8 e8 cf 9b 9f ff 8b 4f 04 8d 55 e4 89 d8 e8 72 9d 9f ff 8d 43 2c 89 c1 89 45 d8 8b 43 30 8d 55 e4 89 53 30 89 4d e4 89 45 e8 <89> 10 8b 55 dc 8b 45 e0 89 7d ec e8 db af 9f ff eb 11 90 31 c0 [ 0.505451] EIP: [<79682de5>] mutex_lock_nested+0x135/0x2a0 SS:ESP 0068:78025e54 [ 0.505451] CR2: 0000000000200200 [ 0.505451] ---[ end trace ad8ac403ff8aef5e ]--- [ 0.505451] Kernel panic - not syncing: Fatal exception Fixes: 9ea92774 ("mac80211_hwsim: Register and bind to driver") Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Junjie Mao <eternal.n08@gmail.com> Signed-off-by:
-
Herbert Xu authored
commit 3ce9b20f upstream. When VLAN is in use in macvtap_put_user, we end up setting csum_start to the wrong place. The result is that the whoever ends up doing the checksum setting will corrupt the packet instead of writing the checksum to the expected location, usually this means writing the checksum with an offset of -4. This patch fixes this by adjusting csum_start when VLAN tags are detected. Fixes: f09e2249 ("macvtap: restore vlan header on user read") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ilya Dryomov authored
commit aaef3170 upstream. Large (greater than 32k, the value of PAGE_ALLOC_COSTLY_ORDER) auth tickets will have their buffers vmalloc'ed, which leads to the following crash in crypto: [ 28.685082] BUG: unable to handle kernel paging request at ffffeb04000032c0 [ 28.686032] IP: [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80 [ 28.686032] PGD 0 [ 28.688088] Oops: 0000 [#1] PREEMPT SMP [ 28.688088] Modules linked in: [ 28.688088] CPU: 0 PID: 878 Comm: kworker/0:2 Not tainted 3.17.0-vm+ #305 [ 28.688088] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 28.688088] Workqueue: ceph-msgr con_work [ 28.688088] task: ffff88011a7f9030 ti: ffff8800d903c000 task.ti: ffff8800d903c000 [ 28.688088] RIP: 0010:[<ffffffff81392b42>] [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80 [ 28.688088] RSP: 0018:ffff8800d903f688 EFLAGS: 00010286 [ 28.688088] RAX: ffffeb04000032c0 RBX: ffff8800d903f718 RCX: ffffeb04000032c0 [ 28.688088] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8800d903f750 [ 28.688088] RBP: ffff8800d903f688 R08: 00000000000007de R09: ffff8800d903f880 [ 28.688088] R10: 18df467c72d6257b R11: 0000000000000000 R12: 0000000000000010 [ 28.688088] R13: ffff8800d903f750 R14: ffff8800d903f8a0 R15: 0000000000000000 [ 28.688088] FS: 00007f50a41c7700(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000 [ 28.688088] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 28.688088] CR2: ffffeb04000032c0 CR3: 00000000da3f3000 CR4: 00000000000006b0 [ 28.688088] Stack: [ 28.688088] ffff8800d903f698 ffffffff81392ca8 ffff8800d903f6e8 ffffffff81395d32 [ 28.688088] ffff8800dac96000 ffff880000000000 ffff8800d903f980 ffff880119b7e020 [ 28.688088] ffff880119b7e010 0000000000000000 0000000000000010 0000000000000010 [ 28.688088] Call Trace: [ 28.688088] [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40 [ 28.688088] [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40 [ 28.688088] [<ffffffff81395d32>] blkcipher_walk_done+0x182/0x220 [ 28.688088] [<ffffffff813990bf>] crypto_cbc_encrypt+0x15f/0x180 [ 28.688088] [<ffffffff81399780>] ? crypto_aes_set_key+0x30/0x30 [ 28.688088] [<ffffffff8156c40c>] ceph_aes_encrypt2+0x29c/0x2e0 [ 28.688088] [<ffffffff8156d2a3>] ceph_encrypt2+0x93/0xb0 [ 28.688088] [<ffffffff8156d7da>] ceph_x_encrypt+0x4a/0x60 [ 28.688088] [<ffffffff8155b39d>] ? ceph_buffer_new+0x5d/0xf0 [ 28.688088] [<ffffffff8156e837>] ceph_x_build_authorizer.isra.6+0x297/0x360 [ 28.688088] [<ffffffff8112089b>] ? kmem_cache_alloc_trace+0x11b/0x1c0 [ 28.688088] [<ffffffff8156b496>] ? ceph_auth_create_authorizer+0x36/0x80 [ 28.688088] [<ffffffff8156ed83>] ceph_x_create_authorizer+0x63/0xd0 [ 28.688088] [<ffffffff8156b4b4>] ceph_auth_create_authorizer+0x54/0x80 [ 28.688088] [<ffffffff8155f7c0>] get_authorizer+0x80/0xd0 [ 28.688088] [<ffffffff81555a8b>] prepare_write_connect+0x18b/0x2b0 [ 28.688088] [<ffffffff81559289>] try_read+0x1e59/0x1f10 This is because we set up crypto scatterlists as if all buffers were kmalloc'ed. Fix it. Signed-off-by:
Ilya Dryomov <idryomov@redhat.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Max Filippov authored
commit 2651cc69 upstream. Userspace actually passes single parameter (path name) to the umount syscall, so new umount just fails. Fix it by requesting old umount syscall implementation and re-wiring umount to it. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit 1a290581 upstream. M-audio FastTrack Ultra quirk doesn't release the kzalloc'ed memory. This patch adds the private_free callback to release it properly. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 3542aed7 upstream. Lenovo Ideapad Z560 has a mute LED that is controlled via EAPD pin 0x1b on CX20585 codec. (EAPD bit on corresponds to mute LED on.) The machine doesn't need other EAPD, so the fixup concentrates on controlling EAPD 0x1b following the vmaster state (but inversely). Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=665315Reported-by:
Szymon Kowalczyk <fazerxlo@o2.pl> Signed-off-by:
-
Tejun Heo authored
commit 66a7cbc3 upstream. Samsung pci-e SSDs on macbooks failed miserably on NCQ commands, so 67809f85 ("ahci: disable NCQ on Samsung pci-e SSDs on macbooks") disabled NCQ on them. It turns out that NCQ is fine as long as MSI is not used, so let's turn off MSI and leave NCQ on. Signed-off-by:
Imre Kaloz <kaloz@openwrt.org> Fixes: 67809f85 ("ahci: disable NCQ on Samsung pci-e SSDs on macbooks") Signed-off-by:
-
Antoine Tenart authored
commit 9a23c1d6 upstream. Changes into the AHCI subsystem have introduced a bug by not taking into account the force_port_map and mask_port_map parameters when using the ahci_pci_save_initial_config function. This commit fixes it by setting the internal parameters of the ahci_port_priv structure. Fixes: 725c7b57Reported-and-tested-by:
Zlatko Calusic <zcalusic@bitsync.net> Signed-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by:
-
James Ralston authored
commit 690000b9 upstream. This patch adds the AHCI-mode SATA Device IDs for the Intel Sunrise Point PCH. Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
-
Daniel Thompson authored
commit 3438cf54 upstream. Currently if the user passes an invalid value on the kernel command line then the kernel will crash during argument parsing. On most systems this is very hard to debug because the console hasn't been initialized yet. This is a regression due to commit 51e158c1 ("param: hand arguments after -- straight to init") which, in response to the systemd debug controversy, made it possible to explicitly pass arguments to init. To achieve this parse_args() was extended from simply returning an error code to returning a pointer. Regretably the new init args logic does not perform a proper validity check on the pointer resulting in a crash. This patch fixes the validity check. Should the check fail then no arguments will be passed to init. This is reasonable and matches how the kernel treats its own arguments (i.e. no error recovery). Signed-off-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Rabin Vincent authored
commit e30f53aa upstream. On a !PREEMPT kernel, attempting to use trace-cmd results in a soft lockup: # trace-cmd record -e raw_syscalls:* -F false NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [trace-cmd:61] ... Call Trace: [<ffffffff8105b580>] ? __wake_up_common+0x90/0x90 [<ffffffff81092e25>] wait_on_pipe+0x35/0x40 [<ffffffff810936e3>] tracing_buffers_splice_read+0x2e3/0x3c0 [<ffffffff81093300>] ? tracing_stats_read+0x2a0/0x2a0 [<ffffffff812d10ab>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff810dc87b>] ? do_read_fault+0x21b/0x290 [<ffffffff810de56a>] ? handle_mm_fault+0x2ba/0xbd0 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff810951e2>] ? trace_buffer_lock_reserve+0x22/0x60 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff8112415d>] do_splice_to+0x6d/0x90 [<ffffffff81126971>] SyS_splice+0x7c1/0x800 [<ffffffff812d1edd>] tracesys_phase2+0xd3/0xd8 The problem is this: tracing_buffers_splice_read() calls ring_buffer_wait() to wait for data in the ring buffers. The buffers are not empty so ring_buffer_wait() returns immediately. But tracing_buffers_splice_read() calls ring_buffer_read_page() with full=1, meaning it only wants to read a full page. When the full page is not available, tracing_buffers_splice_read() tries to wait again with ring_buffer_wait(), which again returns immediately, and so on. Fix this by adding a "full" argument to ring_buffer_wait() which will make ring_buffer_wait() wait until the writer has left the reader's page, i.e. until full-page reads will succeed. Link: http://lkml.kernel.org/r/1415645194-25379-1-git-send-email-rabin@rab.in Fixes: b1169cc6 ("tracing: Remove mock up poll wait function") Signed-off-by:
Rabin Vincent <rabin@rab.in> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Miklos Szeredi authored
commit 799b6014 upstream. Audit rules disappear when an inode they watch is evicted from the cache. This is likely not what we want. The guilty commit is "fsnotify: allow marks to not pin inodes in core", which didn't take into account that audit_tree adds watches with a zero mask. Adding any mask should fix this. Fixes: 90b1e7a5 ("fsnotify: allow marks to not pin inodes in core") Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Richard Guy Briggs authored
commit 897f1acb upstream. Add a space between subj= and feature= fields to make them parsable. Signed-off-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
-
Richard Guy Briggs authored
commit 9ef91514 upstream. When an AUDIT_GET_FEATURE message is sent from userspace to the kernel, it should reply with a message tagged as an AUDIT_GET_FEATURE type with a struct audit_feature. The current reply is a message tagged as an AUDIT_GET type with a struct audit_feature. This appears to have been a cut-and-paste-eo in commit b0fed402. Reported-by:
Steve Grubb <sgrubb@redhat.com> Signed-off-by:
-
Andy Lutomirski authored
commit 81f49a8f upstream. is_compat_task() is the wrong check for audit arch; the check should be is_ia32_task(): x32 syscalls should be AUDIT_ARCH_X86_64, not AUDIT_ARCH_I386. CONFIG_AUDITSYSCALL is currently incompatible with x32, so this has no visible effect. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/a0138ed8c709882aec06e4acc30bfa9b623b8717.1409954077.git.luto@amacapital.netSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Herbert Xu authored
commit a8f9bfdf upstream. When VLAN acceleration is in use on the xmit path, we end up setting csum_start to the wrong place. The result is that the whoever ends up doing the checksum setting will corrupt the packet instead of writing the checksum to the expected location, usually this means writing the checksum with an offset of -4. This patch fixes this by adjusting csum_start when VLAN acceleration is detected. Fixes: 6680ec68 ("tuntap: hardware vlan tx support") Signed-off-by:
-
Nadav Amit authored
commit d29b9d7e upstream. The emulator could reuse an op->type from a previous instruction for some immediate values. If it mistakenly considers the operands as memory operands, it will performs a memory read and overwrite op->val. Consider for instance the ROR instruction - src2 (the number of times) would be read from memory instead of being used as immediate. Mark every immediate operand as such to avoid this problem. Fixes: c44b4c6aSigned-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
