- 17 Jul, 2020 12 commits
-
-
Frederic Weisbecker authored
There is nothing that prevents from forwarding the base clock if it's one jiffy off. The reason for this arbitrary limit of two jiffies is historical and does not longer exist. Signed-off-by:
Frederic Weisbecker <frederic@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Juri Lelli <juri.lelli@redhat.com> Link: https://lkml.kernel.org/r/20200717140551.29076-13-frederic@kernel.org
-
Frederic Weisbecker authored
There is no reason to keep this guard around. The code makes sure that base->clk remains sane and won't be forwarded beyond jiffies nor set backward. Signed-off-by:
-
Frederic Weisbecker authored
Now that the core timer infrastructure doesn't depend anymore on periodic base->clk increments, even when the CPU is not in NO_HZ mode, timer softirqs can be skipped until there are timers to expire. Some spurious softirqs can still remain since base->next_expiry doesn't keep track of canceled timers but this still reduces the number of softirqs significantly: ~15 times less for HZ=1000 and ~5 times less for HZ=100. Signed-off-by:
-
Frederic Weisbecker authored
As for next_expiry, the base->clk catch up logic will be expanded beyond NOHZ in order to avoid triggering useless softirqs. If softirqs should only fire to expire pending timers, periodic base->clk increments must be skippable for random amounts of time. Therefore prepare to catch-up with missing updates whenever an up-to-date base clock is needed. Signed-off-by:
-
Frederic Weisbecker authored
Now that the next expiry it tracked unconditionally when a timer is added, this information can be reused on a tick firing after exiting nohz. Signed-off-by:
-
Frederic Weisbecker authored
So far next expiry was only tracked while the CPU was in nohz_idle mode in order to cope with missing ticks that can't increment the base->clk periodically anymore. This logic is going to be expanded beyond nohz in order to spare timer softirqs so do it unconditionally. Signed-off-by:
-
Frederic Weisbecker authored
If a level has a timer that expires before reaching the next level, there is no need to iterate further. The next level is reached when the 3 lower bits of the current level are cleared. If the next event happens before/during that, the next levels won't provide an earlier expiration. Signed-off-by:
-
Frederic Weisbecker authored
calc_index() adds 1 unit of the level granularity to the expiry passed in parameter to ensure that the timer doesn't expire too early. Add a comment to explain that and the resulting layout in the wheel. Suggested-by:
-
Frederic Weisbecker authored
Consolidate the code by calling trigger_dyntick_cpu() from enqueue_timer() instead of calling it from all its callers. Signed-off-by:
-
Anna-Maria Behnsen authored
The bucket expiry time is the effective expriy time of timers and is greater than or equal to the requested timer expiry time. This is due to the guarantee that timers never expire early and the reduced expiry granularity in the secondary wheel levels. When a timer is enqueued, trigger_dyntick_cpu() checks whether the timer is the new first timer. This check compares next_expiry with the requested timer expiry value and not with the effective expiry value of the bucket into which the timer was queued. Storing the requested timer expiry value in base->next_expiry can lead to base->clk going backwards if the requested timer expiry value is smaller than base->clk. Commit 30c66fc3 ("timer: Prevent base->clk from moving backward") worked around this by preventing the store when timer->expiry is before base->clk, but did not fix the underlying problem. Use the expiry value of the bucket into which the timer is queued to do the new first timer check. This fixes the base->clk going backward problem. The workaround of commit 30c66fc3 ("timer: Prevent base->clk from moving backward") in trigger_dyntick_cpu() is not longer necessary as the timers bucket expiry is guaranteed to be greater than or equal base->clk. Signed-off-by:
Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by:
-
Frederic Weisbecker authored
The higher bits of the timer expiration are cropped while calling calc_index() due to the implicit cast from unsigned long to unsigned int. This loss shouldn't have consequences on the current code since all the computation to calculate the index is done on the lower 32 bits. However to prepare for returning the actual bucket expiration from calc_index() in order to properly fix base->next_expiry updates, the higher bits need to be preserved. Signed-off-by:
-
Frederic Weisbecker authored
When an expiration delta falls into the last level of the wheel, that delta has be compared against the maximum possible delay and reduced to fit in if necessary. However instead of comparing the delta against the maximum, the code compares the actual expiry against the maximum. Then instead of fixing the delta to fit in, it sets the maximum delta as the expiry value. This can result in various undesired outcomes, the worst possible one being a timer expiring 15 days ahead to fire immediately. Fixes: 500462a9 ("timers: Switch to a non-cascading wheel") Signed-off-by:
-
- 09 Jul, 2020 1 commit
-
-
Frederic Weisbecker authored
When a timer is enqueued with a negative delta (ie: expiry is below base->clk), it gets added to the wheel as expiring now (base->clk). Yet the value that gets stored in base->next_expiry, while calling trigger_dyntick_cpu(), is the initial timer->expires value. The resulting state becomes: base->next_expiry < base->clk On the next timer enqueue, forward_timer_base() may accidentally rewind base->clk. As a possible outcome, timers may expire way too early, the worst case being that the highest wheel levels get spuriously processed again. To prevent from that, make sure that base->next_expiry doesn't get below base->clk. Fixes: a683f390 ("timers: Forward the wheel clock whenever possible") Signed-off-by:
-
- 05 Jul, 2020 14 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Using a mutex for "print this warning only once" is so overdesigned as to be actively offensive to my sensitive stomach. Just use "pr_info_once()" that already does this, although in a (harmlessly) racy manner that can in theory cause the message to be printed twice if more than one CPU races on that "is this the first time" test. [ If somebody really cares about that harmless data race (which sounds very unlikely indeed), that person can trivially fix printk_once() by using a simple atomic access, preferably with an optimistic non-atomic test first before even bothering to treat the pointless "make sure it is _really_ just once" case. A mutex is most definitely never the right primitive to use for something like this. ] Yes, this is a small and meaningless detail in a code path that hardly matters. But let's keep some code quality standards here, and not accept outrageously bad code. Link: https://lore.kernel.org/lkml/CAHk-=wgV9toS7GU3KmNpj8hCS9SeF+A0voHS8F275_mgLhL4Lw@mail.gmail.com/ Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A series of fixes for x86: - Reset MXCSR in kernel_fpu_begin() to prevent using a stale user space value. - Prevent writing MSR_TEST_CTRL on CPUs which are not explicitly whitelisted for split lock detection. Some CPUs which do not support it crash even when the MSR is written to 0 which is the default value. - Fix the XEN PV fallout of the entry code rework - Fix the 32bit fallout of the entry code rework - Add more selftests to ensure that these entry problems don't come back. - Disable 16 bit segments on XEN PV. It's not supported because XEN PV does not implement ESPFIX64" * tag 'x86-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ldt: Disable 16-bit segments on Xen PV x86/entry/32: Fix #MC and #DB wiring on x86_32 x86/entry/xen: Route #DB correctly on Xen PV x86/entry, selftests: Further improve user entry sanity checks x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER selftests/x86: Consolidate and fix get/set_eflags() helpers selftests/x86/syscall_nt: Clear weird flags after each test selftests/x86/syscall_nt: Add more flag combinations x86/entry/64/compat: Fix Xen PV SYSENTER frame setup x86/entry: Move SYSENTER's regs->sp and regs->flags fixups into C x86/entry: Assert that syscalls are on the right stack x86/split_lock: Don't write MSR_TEST_CTRL on CPUs that aren't whitelisted x86/fpu: Reset MXCSR to default in kernel_fpu_begin() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A set of interrupt chip driver fixes: - Ensure the atomicity of affinity updates in the GIC driver - Don't try to sleep in atomic context when waiting for the GICv4.1 to respond. Use polling instead. - Typo fixes in Kconfig and warnings" * tag 'irq-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic: Atomically update affinity irqchip/riscv-intc: Fix a typo in a pr_warn() irqchip/gic-v4.1: Use readx_poll_timeout_atomic() to fix sleep in atomic irqchip/loongson-pci-msi: Fix a typo in Kconfig -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull rcu fixlet from Thomas Gleixner: "A single fix for a printk format warning in RCU" * tag 'core-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcuperf: Fix printk format warning
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes frin Masahiro Yamada: - fix various bugs in xconfig - fix some issues in cross-compilation using Clang - fix documentation * tag 'kbuild-fixes-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: .gitignore: Do not track `defconfig` from `make savedefconfig` kbuild: make Clang build userprogs for target architecture kbuild: fix CONFIG_CC_CAN_LINK(_STATIC) for cross-compilation with Clang kconfig: qconf: parse newer types at debug info kconfig: qconf: navigate menus on hyperlinks kconfig: qconf: don't show goback button on splitMode kconfig: qconf: simplify the goBack() logic kconfig: qconf: re-implement setSelected() kconfig: qconf: make debug links work again kconfig: qconf: make search fully work again on split mode kconfig: qconf: cleanup includes docs: kbuild: fix ReST formatting gcc-plugins: fix gcc-plugins directory path in documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Four small fixes in three drivers. The mptfusion one has actually caused user visible issues in certain kernel configurations" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mptfusion: Don't use GFP_ATOMIC for larger DMA allocations scsi: libfc: Skip additional kref updating work event scsi: libfc: Handling of extra kref scsi: qla2xxx: Fix a condition in qla2x00_find_all_fabric_devs()
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe fixes from Christoph: - Fix crash in multi-path disk add (Christoph) - Fix ignore of identify error (Sagi) - Fix a compiler complaint that a function should be static (Wei) * tag 'block-5.8-2020-07-05' of git://git.kernel.dk/linux-block: block: make function __bio_integrity_free() static nvme: fix a crash in nvme_mpath_add_disk nvme: fix identify error status silent ignore -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fix from Jens Axboe: "Andres reported a regression with the fix that was merged earlier this week, where his setup of using signals to interrupt io_uring CQ waits no longer worked correctly. Fix this, and also limit our use of TWA_SIGNAL to the case where we need it, and continue using TWA_RESUME for task_work as before. Since the original is marked for 5.7 stable, let's flush this one out early" * tag 'io_uring-5.8-2020-07-05' of git://git.kernel.dk/linux-block: io_uring: fix regression with always ignoring signals in io_cqring_wait()
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "The usual driver fixes and documentation updates" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mlxcpld: check correct size of maximum RECV_LEN packet i2c: add Kconfig help text for slave mode i2c: slave-eeprom: update documentation i2c: eg20t: Load module automatically if ID matches i2c: designware: platdrv: Set class based on DMI i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Thomas Bogendoerfer: - fix for missing hazard barrier - DT fix for ingenic - DT fix of GPHY names for lantiq - fix usage of smp_processor_id() while preemption is enabled * tag 'mips_fixes_5.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Do not use smp_processor_id() in preemptible code MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen MIPS: ingenic: gcw0: Fix HP detection GPIO. MIPS: lantiq: xway: sysctrl: fix the GPHY clock alias names
-
Xingxing Su authored
Use preempt_disable() to fix the following bug under CONFIG_DEBUG_PREEMPT. [ 21.915305] BUG: using smp_processor_id() in preemptible [00000000] code: qemu-system-mip/1056 [ 21.923996] caller is do_ri+0x1d4/0x690 [ 21.927921] CPU: 0 PID: 1056 Comm: qemu-system-mip Not tainted 5.8.0-rc2 #3 [ 21.934913] Stack : 0000000000000001 ffffffff81370000 ffffffff8071cd60 a80f926d5ac95694 [ 21.942984] a80f926d5ac95694 0000000000000000 98000007f0043c88 ffffffff80f2fe40 [ 21.951054] 0000000000000000 0000000000000000 0000000000000001 0000000000000000 [ 21.959123] ffffffff802d60cc 98000007f0043dd8 ffffffff81f4b1e8 ffffffff81f60000 [ 21.967192] ffffffff81f60000 ffffffff80fe0000 ffff000000000000 0000000000000000 [ 21.975261] fffffffff500cce1 0000000000000001 0000000000000002 0000000000000000 [ 21.983331] ffffffff80fe1a40 0000000000000006 ffffffff8077f940 0000000000000000 [ 21.991401] ffffffff81460000 98000007f0040000 98000007f0043c80 000000fffba8cf20 [ 21.999471] ffffffff8071cd60 0000000000000000 0000000000000000 0000000000000000 [ 22.007541] 0000000000000000 0000000000000000 ffffffff80212ab4 a80f926d5ac95694 [ 22.015610] ... [ 22.018086] Call Trace: [ 22.020562] [<ffffffff80212ab4>] show_stack+0xa4/0x138 [ 22.025732] [<ffffffff8071cd60>] dump_stack+0xf0/0x150 [ 22.030903] [<ffffffff80c73f5c>] check_preemption_disabled+0xf4/0x100 [ 22.037375] [<ffffffff80213b84>] do_ri+0x1d4/0x690 [ 22.042198] [<ffffffff8020b828>] handle_ri_int+0x44/0x5c [ 24.359386] BUG: using smp_processor_id() in preemptible [00000000] code: qemu-system-mip/1072 [ 24.368204] caller is do_ri+0x1a8/0x690 [ 24.372169] CPU: 4 PID: 1072 Comm: qemu-system-mip Not tainted 5.8.0-rc2 #3 [ 24.379170] Stack : 0000000000000001 ffffffff81370000 ffffffff8071cd60 a80f926d5ac95694 [ 24.387246] a80f926d5ac95694 0000000000000000 98001007ef06bc88 ffffffff80f2fe40 [ 24.395318] 0000000000000000 0000000000000000 0000000000000001 0000000000000000 [ 24.403389] ffffffff802d60cc 98001007ef06bdd8 ffffffff81f4b818 ffffffff81f60000 [ 24.411461] ffffffff81f60000 ffffffff80fe0000 ffff000000000000 0000000000000000 [ 24.419533] fffffffff500cce1 0000000000000001 0000000000000002 0000000000000000 [ 24.427603] ffffffff80fe0000 0000000000000006 ffffffff8077f940 0000000000000020 [ 24.435673] ffffffff81460020 98001007ef068000 98001007ef06bc80 000000fffbbbb370 [ 24.443745] ffffffff8071cd60 0000000000000000 0000000000000000 0000000000000000 [ 24.451816] 0000000000000000 0000000000000000 ffffffff80212ab4 a80f926d5ac95694 [ 24.459887] ... [ 24.462367] Call Trace: [ 24.464846] [<ffffffff80212ab4>] show_stack+0xa4/0x138 [ 24.470029] [<ffffffff8071cd60>] dump_stack+0xf0/0x150 [ 24.475208] [<ffffffff80c73f5c>] check_preemption_disabled+0xf4/0x100 [ 24.481682] [<ffffffff80213b58>] do_ri+0x1a8/0x690 [ 24.486509] [<ffffffff8020b828>] handle_ri_int+0x44/0x5c Signed-off-by:
Xingxing Su <suxingxing@loongson.cn> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Hauke Mehrtens authored
This resolves the hazard between the mtc0 in the change_c0_status() and the mfc0 in configure_exception_vector(). Without resolving this hazard configure_exception_vector() could read an old value and would restore this old value again. This would revert the changes change_c0_status() did. I checked this by printing out the read_c0_status() at the end of per_cpu_trap_init() and the ST0_MX is not set without this patch. The hazard is documented in the MIPS Architecture Reference Manual Vol. III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev 6.03 table 8.1 which includes: Producer | Consumer | Hazard ----------|----------|---------------------------- mtc0 | mfc0 | any coprocessor 0 register I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU. There the change_c0_status() function would activate the DSPen by setting ST0_MX in the c0_status register. This was reverted and then the system got a DSP exception when the DSP registers were saved in save_dsp() in the first process switch. The crash looks like this: [ 0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.107070] Kernel panic - not syncing: Unexpected DSP exception [ 0.113470] Rebooting in 1 seconds.. We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs, not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it did not happen. In the kernel I bisected this problem to commit 9012d011 ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was reverted it also happened after commit 172dcd93 ("MIPS: Always allocate exception vector for MIPSr2+"). Commit 0b24cae4 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") does similar changes to a different file. I am not sure if there are more places affected by this problem. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Paul Menzel authored
Running `make savedefconfig` creates by default `defconfig`, which is, currently, on git’s radar, for example, `git status` lists this file as untracked. So, add the file to `.gitignore`, so it’s ignored by git. Signed-off-by:
Paul Menzel <pmenzel@molgen.mpg.de> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
- 04 Jul, 2020 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "One fix for a regression in our pkey handling, which exhibits as PROT_EXEC mappings taking continuous page faults. Thanks to: Jan Stancek, Aneesh Kumar K.V" * tag 'powerpc-5.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm/pkeys: Make pkey access check work on execute_only_key
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "Nothing earth-shattering, really - some CPU errata workarounds (one day they'll get it right, ha!) and a fix for a boot failure with very large kernel images where the alternative patching gets confused when patching relative branches using veneers. - Fix alternative patching for very large kernel images and modules - Hook up existing CPU errata workarounds for Qualcomm Kryo CPUs" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Add KRYO4XX silver CPU cores to erratum list 1530923 and 1024718 arm64: Add KRYO4XX gold CPU cores to erratum list 1463225 and 1418040 arm64: Add MIDR value for KRYO4XX gold CPU cores arm64/alternatives: use subsections for replacement sequences
-
Jens Axboe authored
When switching to TWA_SIGNAL for task_work notifications, we also made any signal based condition in io_cqring_wait() return -ERESTARTSYS. This breaks applications that rely on using signals to abort someone waiting for events. Check if we have a signal pending because of queued task_work, and repeat the signal check once we've run the task_work. This provides a reliable way of telling the two apart. Additionally, only use TWA_SIGNAL if we are using an eventfd. If not, we don't have the dependency situation described in the original commit, and we can get by with just using TWA_RESUME like we previously did. Fixes: ce593a6c ("io_uring: use signal based task_work running") Cc: stable@vger.kernel.org # v5.7 Reported-by:
Andres Freund <andres@anarazel.de> Tested-by:
Jens Axboe <axboe@kernel.dk>
-
Andy Lutomirski authored
Xen PV doesn't implement ESPFIX64, so they don't work right. Disable them. Also print a warning the first time anyone tries to use a 16-bit segment on a Xen PV guest that would otherwise allow it to help people diagnose this change in behavior. This gets us closer to having all x86 selftests pass on Xen PV. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/92b2975459dfe5929ecf34c3896ad920bd9e3f2d.1593795633.git.luto@kernel.org
-
Andy Lutomirski authored
DEFINE_IDTENTRY_MCE and DEFINE_IDTENTRY_DEBUG were wired up as non-RAW on x86_32, but the code expected them to be RAW. Get rid of all the macro indirection for them on 32-bit and just use DECLARE_IDTENTRY_RAW and DEFINE_IDTENTRY_RAW directly. Also add a warning to make sure that we only hit the _kernel paths in kernel mode. Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
-
Andy Lutomirski authored
On Xen PV, #DB doesn't use IST. It still needs to be correctly routed depending on whether it came from user or kernel mode. Get rid of DECLARE/DEFINE_IDTENTRY_XEN -- it was too hard to follow the logic. Instead, route #DB and NMI through DECLARE/DEFINE_IDTENTRY_RAW on Xen, and do the right thing for #DB. Also add more warnings to the exc_debug* handlers to make this type of failure more obvious. This fixes various forms of corruption that happen when usermode triggers #DB on Xen PV. Fixes: 4c0dcd83 ("x86/entry: Implement user mode C entry points for #DB and #MCE") Signed-off-by:
-
Andy Lutomirski authored
Chasing down a Xen bug caused me to realize that the new entry sanity checks are still fairly weak. Add some more checks. Signed-off-by:
-
Andy Lutomirski authored
Move the clearing of the high bits of RAX after Xen PV joins the SYSENTER path so that Xen PV doesn't skip it. Arguably this code should be deleted instead, but that would belong in the merge window. Fixes: ffae641f ("x86/entry/64/compat: Fix Xen PV SYSENTER frame setup") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "One small cleanup patch for ARM and two patches for the xenbus driver fixing latent problems (large stack allocations and bad return code settings)" * tag 'for-linus-5.8b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: let xenbus_map_ring_valloc() return errno values only xen/xenbus: avoid large structs and arrays on the stack arm/xen: remove the unused macro GRANT_TABLE_PHYSADDR
-
Wolfram Sang authored
I2C_SMBUS_BLOCK_MAX defines already the maximum number as defined in the SMBus 2.0 specs. I don't see a reason to add 1 here. Also, fix the errno to what is suggested for this error. Fixes: c9bfdc7c ("i2c: mlxcpld: Add support for smbus block read transaction") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Michael Shych <michaelsh@mellanox.com> Tested-by:
Wolfram Sang <wsa@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull sysctl fix from Al Viro: "Another regression fix for sysctl changes this cycle..." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Call sysctl_head_finish on error
-
Wolfram Sang authored
I can't recall why there was none, but we surely want to have it. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Wolfram Sang authored
Add more details which have either been missing ever since or describe recent additions. Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
