Alexander Lobakin says:

====================
idpf: add get/set for Ethtool's header split ringparam

Currently, the header split feature (putting headers in one smaller
buffer and then the data in a separate bigger one) is always enabled
in idpf when supported.
One may want to not have fragmented frames per each packet, for example,
to avoid XDP frags. To better optimize setups for particular workloads,
add ability to switch the header split state on and off via Ethtool's
ringparams, as well as to query the current status.
There's currently only GET in the Ethtool Netlink interface for now,
so add SET first. I suspect idpf is not the only one supporting this.
====================

Link: https://lore.kernel.org/r/20231212142752.935000-1-aleksander.lobakin@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

idpf supports the header split feature and that feature is always
enabled by default.
However, for flexibility reasons and to simplify some scenarios, it
would be useful to have the support for switching the header split
off (and on) from the userspace.

Address that need by adding the user config parameter, the functions
for disabling (or enabling) the header split feature, and calls to
them from the Ethtool ringparam callbacks.
It still is enabled by default if supported by the hardware.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Co-developed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20231212142752.935000-3-aleksander.lobakin@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Follow up commit 9690ae60 ("ethtool: add header/data split
indication") and add the set part of Ethtool's header split, i.e.
ability to enable/disable header split via the Ethtool Netlink
interface. This might be helpful to optimize the setup for particular
workloads, for example, to avoid XDP frags, and so on.
A driver should advertise ``ETHTOOL_RING_USE_TCP_DATA_SPLIT`` in its
ops->supported_ring_params to allow doing that. "Unknown" passed from
the userspace when the header split is supported means the driver is
free to choose the preferred state.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20231212142752.935000-2-aleksander.lobakin@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

TCP got MSG_EOR support in linux-4.7.

This is a canonical way of making sure no coalescing
will be performed on the skb, even if it could not be
immediately sent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231212110608.3673677-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Oleksij Rempel says:

====================
add support for DP83TG720S PHY
====================

Link: https://lore.kernel.org/r/20231212054144.87527-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The DP83TG720S-Q1 device is an IEEE 802.3bp and Open Alliance compliant
automotive Ethernet physical layer transceiver.

This driver was tested with i.MX8MP EQOS (stmmac) on the MAC side and
same TI PHY on other side.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20231212054144.87527-3-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Move part of the genphy_c45_pma_read_abilities() code to a separate
function.

Some PHYs do not implement PMA/PMD status 2 register (Register 1.8) but
do implement PMA/PMD extended ability register (Register 1.11). To make
use of it, we need to be able to access this part of code separately.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20231212054144.87527-2-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pedro Tammela says:

====================
net/sched: optimizations around action binding and init

Scaling optimizations for action binding in rtnl-less filters.
We saw a noticeable lock contention around idrinfo->lock when
testing in a 56 core system, which disappeared after the patches.
====================

Link: https://lore.kernel.org/r/20231211181807.96028-1-pctammela@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

tcf_idr_insert_many will replace the allocated -EBUSY pointer in
tcf_idr_check_alloc with the real action pointer, exposing it
to all operations. This operation is only needed when the action pointer
is created (ACT_P_CREATED). For actions which are bound to (returned 0),
the pointer already resides in the idr making such operation a nop.

Even though it's a nop, it's still not a cheap operation as internally
the idr code walks the idr and then does a replace on the appropriate slot.
So if the action was bound, better skip the idr replace entirely.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20231211181807.96028-3-pctammela@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of relying only on the idrinfo->lock mutex for
bind/alloc logic, rely on a combination of rcu + mutex + atomics
to better scale the case where multiple rtnl-less filters are
binding to the same action object.

Action binding happens when an action index is specified explicitly and
an action exists which such index exists. Example:
  tc actions add action drop index 1
  tc filter add ... matchall action drop index 1
  tc filter add ... matchall action drop index 1
  tc filter add ... matchall action drop index 1
  tc filter ls ...
     filter protocol all pref 49150 matchall chain 0 filter protocol all pref 49150 matchall chain 0 handle 0x1
     not_in_hw
           action order 1: gact action drop
            random type none pass val 0
            index 1 ref 4 bind 3

   filter protocol all pref 49151 matchall chain 0 filter protocol all pref 49151 matchall chain 0 handle 0x1
     not_in_hw
           action order 1: gact action drop
            random type none pass val 0
            index 1 ref 4 bind 3

   filter protocol all pref 49152 matchall chain 0 filter protocol all pref 49152 matchall chain 0 handle 0x1
     not_in_hw
           action order 1: gact action drop
            random type none pass val 0
            index 1 ref 4 bind 3

When no index is specified, as before, grab the mutex and allocate
in the idr the next available id. In this version, as opposed to before,
it's simplified to store the -EBUSY pointer instead of the previous
alloc + replace combination.

When an index is specified, rely on rcu to find if there's an object in
such index. If there's none, fallback to the above, serializing on the
mutex and reserving the specified id. If there's one, it can be an -EBUSY
pointer, in which case we just try again until it's an action, or an action.
Given the rcu guarantees, the action found could be dead and therefore
we need to bump the refcount if it's not 0, handling the case it's
in fact 0.

As bind and the action refcount are already atomics, these increments can
happen without the mutex protection while many tcf_idr_check_alloc race
to bind to the same action instance.

In case binding encounters a parallel delete or add, it will return
-EAGAIN in order to try again. Both filter and action apis already
have the retry machinery in-place. In case it's an unlocked filter it
retries under the rtnl lock.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20231211181807.96028-2-pctammela@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Heng Qi says:

====================
virtio-net: support dynamic coalescing moderation

Now, virtio-net already supports per-queue moderation parameter
setting. Based on this, we use the linux dimlib to support
dynamic coalescing moderation for virtio-net.

Due to some scheduling issues, we only support and test the rx dim.

Some test results:

I. Sockperf UDP
=================================================
1. Env
rxq_0 with affinity to cpu_0.

2. Cmd
client: taskset -c 0 sockperf tp -p 8989 -i $IP -t 10 -m 16B
server: taskset -c 0 sockperf sr -p 8989

3. Result
dim off: 1143277.00 rxpps, throughput 17.844 MBps, cpu is 100%.
dim on:  1124161.00 rxpps, throughput 17.610 MBps, cpu is 83.5%.
=================================================

II. Redis
=================================================
1. Env
There are 8 rxqs, and rxq_i with affinity to cpu_i.

2. Result
When all cpus are 100%, ops/sec of memtier_benchmark client is
dim off:  978437.23
dim on:  1143638.28
=================================================

III. Nginx
=================================================
1. Env
There are 8 rxqs and rxq_i with affinity to cpu_i.

2. Result
When all cpus are 100%, requests/sec of wrk client is
dim off:  877931.67
dim on:  1019160.31
=================================================

IV. Latency of sockperf udp
=================================================
1. Rx cmd
taskset -c 0 sockperf sr -p 8989

2. Tx cmd
taskset -c 0 sockperf pp -i ${ip} -p 8989 -t 10

After running this cmd 5 times and averaging the results,

3. Result
dim off: 17.7735 usec
dim on:  18.0110 usec
=================================================

Changelog:
v7->v8:
- Add select DIMLIB.

v6->v7:
- Drop the patch titled "spin lock for ctrl cmd access"
- Use rtnl_trylock to avoid the deadlock.

v5->v6:
- Add patch(4/5): spin lock for ctrl cmd access
- Patch(5/5):
   - Use spin lock and cancel_work_sync to synchronize

v4->v5:
- Patch(4/4):
   - Fix possible synchronization issues with cancel_work_sync.
   - Reduce if/else nesting levels

v3->v4:
- Patch(5/5): drop.

v2->v3:
- Patch(4/5): some minor modifications.

v1->v2:
- Patch(2/5): a minor fix.
- Patch(4/5):
   - improve the judgment of dim switch conditions.
   - Cancel the work when vq reset.
- Patch(5/5): drop the tx dim implementation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

By comparing the traffic information in the complete napi processes,
let the virtio-net driver automatically adjust the coalescing
moderation parameters of each receive queue.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extract commands to set virtqueue coalescing parameters for reuse
by ethtool -Q, vq resize and netdim.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch separates the rx and tx global coalescing moderation
commands to support netdim switches in subsequent patches.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rx netdim needs to count the traffic during a complete napi process,
and start updating and comparing samples to make decisions after
the napi ends. Let virtqueue_napi_complete() return true if napi is done,
otherwise vice versa.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shannon Nelson says:

====================
ionic: updates to PCI error handling

These are improvements to our PCI error handling, including FLR and
AER events.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Set up the pci_error_handlers error_detected and resume to be useful in
handling AER events.  If the error detected is pci_channel_io_frozen we
set up to do an FLR at the end of the AER handling - this tends to clear
things up well enough that traffic can continue.  Else, let the AER/PCI
machinery do what is needed for the less serious errors seen.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove and restore the lif's debugfs pointers on a reset,
and make sure to check for the dentry before removing it
in case an earlier reset failed to rebuild the lif.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When stopping the watchdog timer at remove time we should
be using the new timer_shutdown_sync to assure the timer
doesn't ever get rearmed.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If there was a failed attempt to reset the PCI connection,
don't later try to read from PCI as the space is unmapped
and will cause a paging request crash.  When clearing the PCI
setup we can clear the dev_info register pointer, and check
it before using it in the fw_running test.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a reset fails, the PCI device is left in a disabled
state, so don't try to disable it again on driver remove.
This prevents a scary looking WARN trace in the kernel log.

    ionic 0000:2b:00.0: disabling already-disabled device
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the driver or firmware is stuck in reset state, don't bother
trying to use adminq commands.  This speeds up shutdown and
prevents unnecessary timeouts and error messages.

This includes a bit of rework on ionic_adminq_post_wait()
and ionic_adminq_post_wait_nomsg() to both use
__ionic_adminq_post_wait() which can do the checks needed in
both cases.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure we keep and replay the filters and RSS config across
an FLR by using our FW_RESET flag.  This gets checked on the
way down and on the way back up to help determine how much LIF
state to keep and restore across a reset action.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't rely on the PCI memory for the devcmd opcode because we
read a 0xff value if the PCI bus is broken, which can cause us
to report a bogus dev_cmd opcode later.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Complete all counters on XGMAC Core.
These can be useful for debugging.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Christian Marangi says:

====================
net: phy: at803x: cleanup

The intention of this big series is to try to cleanup the big
at803x PHY driver.

It currently have 3 different family of PHY in it. at803x, qca83xx
and qca808x.

The current codebase required lots of cleanup and reworking to
make the split possible as currently there is a greater use of
adding special function matching the phy_id.

This has been reworked to make the function actually generic
and make the change only in more specific one. The result
is the addition of micro additional function but that is for good
as it massively simplify splitting the driver later.

Consider that this is all in preparation for the addition of
qca807x PHY driver that will also uso some of the functions of
at803x.

Subsequent series will come with the actual PHY split and other
required cleanup. This is only to start the process with minor
changes.

Changes v4:
- Improve at8031_probe function
Changes v3:
- Add Reviewed-by tag from Andrew
- Split patch 10 (at8031 rename) to rename and move
Changes v2:
- Drop split part due to series too big
- Split changes even more
- Fix problem pointed out by Russell (flawed reworked function logic)
- Add Reviewed-by tag from Andrew
- Minor rework to prevent further code duplication for cdt
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Drop specific PHY ID check for cable test functions for at803x. This is
done to make functions more generic. While at it better describe what
the functions does by using more symbolic function names.

PHYs that requires to set additional reg are moved to specific function
calling the more generic one.

cdt_start and cdt_wait_for_completion are changed to take an additional
arg to pass specific values specific to the PHY.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move at8035 specific DT parse for clock out frequency to dedicated probe
to make at803x probe function more generic.

This is to tidy code and no behaviour change are intended.

Detection logic is changed, we check if the clk 25m mask is set and if
it's not zero, we assume the qca,clk-out-frequency property is set.

The property is checked in the generic at803x_parse_dt called by
at803x_probe.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move at8031 functions in dedicated section with dedicated at8031
parse_dt and probe.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rename at8031 related DT function name to a more specific name
referencing they are only related to at8031 and not to the generic
at803x PHY family.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move specific at8031 config_intr bits to dedicated function to make
at803x_config_initr more generic.

This is needed in preparation for PHY driver split as qca8081 share the
same function to setup interrupts.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move specific at8031 WOL enable/disable to dedicated function to make
at803x_set_wol more generic.

This is needed in preparation for PHY driver split as qca8081 share the
same function to toggle WOL settings.

In this new implementation WOL module in at8031 is enabled after the
generic interrupt is setup. This should not cause any problem as the
WOL_INT has a separate implementation and only relay on MAC bits.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move specific at8031 config_init to dedicated function to make
at803x_config_init more generic and tidy things up.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move specific at8031 probe mode check to dedicated probe to make
at803x_probe more generic and keep code tidy.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move specific DT options for at8031 to specific probe to tidy things up
and make at803x_parse_dt more generic.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rework qca83xx specific check to dedicated function to tidy things up
and drop useless phy_id check.

Also drop an useless link_change_notify for QCA8337 as it did nothing an
returned early.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function and the struct related to hw_stats were specific to qca83xx
PHY but were called following the convention in the driver of calling
everything with at803x prefix.

To better organize the code, rename these function a more specific name
to better describe that they are specific to 83xx PHY family.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the WOL disable call to specific at8031 probe to make at803x_probe
more generic and drop extra check for PHY ID.

Keep the same previous behaviour by first calling at803x_probe and then
disabling WOL.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix passing the wrong reference for config_initr on passing the function
pointer, drop the wrong & from at803x_config_intr in the PHY struct.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mode supported is currently reported to the user exactly the same, as
the current mode. That's because mode changing is not implemented.
Remove the leftover mode_supported() op and use mode_get() to fill up
the supported mode exposed to user.

One, if even, mode changing is going to be introduced, this could be
very easily taken back. In the meantime, prevent drivers form
implementing this in wrong way (as for example recent netdevsim
implementation attempt intended to do).
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>