Factor out setup_private_pat() for introducing the following patches.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505202148-22959-1-git-send-email-zhi.a.wang@intel.comSigned-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Min brightness value from vbt was missing for BXT platform.
This setting have to refer backlight ic spec to restrict
min backlight output. Without this restriction, driver would
allow to configure lower brightness value and violate
backlight ic requirement.

Fixes: 0fb890c0 ("drm/i915/bxt: BLC implementation")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Gary C Wang <gary.c.wang@intel.com>
Signed-off-by: Shawn Lee <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505187390-7039-1-git-send-email-shawn.c.lee@intel.com

During IGT testing it has been shown that the specification
defined polling time of 1 us for FCLK_DONE, is sometimes not
enough. The issue is still reproducible while disabling
C-states through the PM QoS framework and also while disabling
preemtion. From this the most plausible explanation is that the
issue is due to a firmware flaw.
As a workaround, it is better to wait a little bit longer for
the FCLK_DONE to come around, than to leave with an DRM_ERROR
and having FCLK_DONE at a randome time after.
While spinning a list of igt tests prone to reproduce the issue
the FCLK_DONE poll failed at approximately 2% of the invocations
of the bdw_set_cdclk function. The longest poll time during this
testing was measured to ~7us. So, the suggested new poll time of
100us is on the safe side.

v2: Added more documentation about investigations done.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102243Signed-off-by: Marta Lofstedt <marta.lofstedt@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908132829.6312-1-marta.lofstedt@intel.com

Continue on VLV PSR split with vfunc, let's also create one
for enabling source.

Also since we are touching *_enable_source functions let's
fix a comment with wrong name for vlv's one.

v2: Fix typo on commit message (DK).

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-12-rodrigo.vivi@intel.com

Continue on VLV PSR split with vfunc, let's also create one
for enabling sink.

v2: Fix typo on commit message (DK).

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-11-rodrigo.vivi@intel.com

Continue on VLV PSR split with vfunc, let's also create
one for setting up VSC.

v2: Rebased on top of commit d2419ffc ("drm/i915: Plumb
    crtc_state to PSR enable/disable")

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-10-rodrigo.vivi@intel.com

Let's move the activation calls together after enable is done.

No real functional change should be expected here. Just an attempt
to get it clear when we are really activating PSR after enabling it.

v2: Add braces on if/else because commit message there is too long
    as suggested by Jani.
v3: Rebased on top of commit d2419ffc ("drm/i915: Plumb
    crtc_state to PSR enable/disable")

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-9-rodrigo.vivi@intel.com

No functional change is expected here since at this point
PSR is not allowed to go to any active state. In other
words, not really enabled.

However let's do in a separated patch so it gets clear
on what is change and specially it can helps on bisect
case if we figure something has caused changes in behaviour.

But this needs to be done before we make the vfunc to
enable source to be in parity with VLV implementation.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-8-rodrigo.vivi@intel.com

This sequence is part of enable source anyways, but they
only need to be executed once and not on every activation,
So let's re-create hsw_enable_source.

v2: Avoid changing order here to avoid changing behaviour
    as suggested by Jani.
v3: Rebased on top of commit d2419ffc ("drm/i915: Plumb
    crtc_state to PSR enable/disable")

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-7-rodrigo.vivi@intel.com

VSC package is decided per eDP spec for psr1 or psr2,
and not per platform, so let's unify it and kill "skl"
func.

v2: Rebased on top of commit d2419ffc ("drm/i915: Plumb
    crtc_state to PSR enable/disable")

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-6-rodrigo.vivi@intel.com

Continue on VLV PSR split with vfunc, let's move activate
function there.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-5-rodrigo.vivi@intel.com

On HSW+ the real activate of PSR is decided by the source
after certain amount of configured idle frames.

However for the driver perspective where we track psr.active
variable this function here is the actual activate one. So
let's rename it before moving to vfunc with that.

v2: Fix typo on commit message (DK).

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-4-rodrigo.vivi@intel.com

VLV/CHV has a total different PSR implementation than the
other platforms, so let's start moving that to vfuncs.
Let's start with disable_src one.

v2: Rebased on top of commit d2419ffc ("drm/i915: Plumb
    crtc_state to PSR enable/disable")

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-3-rodrigo.vivi@intel.com

We really don't want to setup vfuncs and lock mutexes on
platforms that has no support to PSR.

Also we know what platforms they are so let's do it quietly.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-2-rodrigo.vivi@intel.com

We should go through the error handling path to decrease the
'framebuffer_references' as done everywhere else in this function.

Fixes: 2e2adb05 ("drm/i915: Add render decompression support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170910085642.13673-1-christophe.jaillet@wanadoo.fr

If we know that we will completely fill a pagetable (i.e. we are
inserting a complete set of 512 pages), we can skip prefilling that PT
with scratch entries. If we have to abort the insertion prior to writing
the real entries, we will teardown the pagetable and remove it from the
page directory (so that we will restart the allocation next time).

We could do similar tricks for the PD and PDP, but the likelihood of a
single insertion covering the entire 512 entries diminishes, as do the
cycle savings. The saving are even greater (relatively) when we are
preallocating page tables for huge pages, as then we never need to fill
the page table.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908181622.17791-1-chris@chris-wilson.co.ukReviewed-by: Matthew Auld <matthew.auld@intel.com>

Macro params shall be wrapped into () to avoid unexpected results.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908161130.22424-1-michal.wajdeczko@intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Gen7 won't get any new engines, and we already added VCS2 there to just
silence gcc's not handled in switch warnings.

Use a default case instead, otherwise we will need to keep adding extra
cases if changes happen in the future.

v2: Since reaching the default case is impossible, use GEM_BUG_ON (Chris).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170830180115.907-1-michel.thierry@intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

gvt-next-2017-09-08

- PCI config sanitize series (Changbin)
- Workload submission error handling series (Fred)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908063155.l54lvpivxntjm7hq@zhen-hp.sh.intel.com

IGD is PCIe device and has extended configuration space. Checking
the binary dump, we can see we have Caps located out of PCI compatible
Configuration Space range.

0x000: 86 80 12 19 17 04 10 00 06 00 00 03 00 00 00 00
0x010: 04 00 00 10 08 00 00 00 0c 00 00 00 08 00 00 00
0x020: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 b9 06
0x030: 00 f8 ff ff 40 00 00 00 00 00 00 00 0b 01 00 00
0x040: 09 70 0c 01 71 26 01 62 c8 00 04 84 00 00 00 00
0x050: c1 00 00 00 39 00 00 00 00 00 00 00 01 00 00 a2
0x060: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
0x070: 10 ac 92 00 00 80 00 10 00 00 00 00 00 00 00 00
0x080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0a0: 00 00 00 00 00 00 00 00 00 00 00 00 05 d0 01 00
0x0b0: 18 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
0x0c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0d0: 01 00 22 00 00 80 00 00 00 00 00 00 00 00 00 00
0x0e0: 00 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00
0x0f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x100: 1b 00 01 20 02 14 00 00 00 00 00 00 00 00 00 00
...

Currently, we only emulate the PCI compatible Configuration Space.
This is okay if we attach vGPU to PCI bus. But when we attach to
a PCI Express bus (when Qemu emulates a Intel Q35 chipset which has
PCIe slot), it will not work. Extended Configuration Space is required
for a PCIe device.

This patch extended the virtual configuration space from 256 bytes
to 4KB bytes. So we are to be a *real* PCIe device. And for the
Extended CapList we keep same to physical GPU.

Cc: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Looking at our virtual PCI device, we can see surprising Region 4 and Region 5.
00:10.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 06) (prog-if 00 [VGA controller])
        ....
        Region 0: Memory at 140000000 (64-bit, non-prefetchable) [size=16M]
        Region 2: Memory at 180000000 (64-bit, prefetchable) [size=1G]
        Region 4: Memory at <ignored> (32-bit, non-prefetchable)
        Region 5: Memory at <ignored> (32-bit, non-prefetchable)
        Expansion ROM at febd6000 [disabled] [size=2K]

The fact is that we only implemented BAR0 and BAR2. Surprising Region 4 and
Region 5 are shown because we report their size as 0xffffffff. They should
report size 0 instead.

BTW, the physical GPU has a PIO BAR. GVTg hasn't implemented PIO access, so
we ignored this BAR for vGPU device.

v2: fix BAR size value calculation.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1458032Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

fix the wrong return type and return error once the unknown
command is scanned.

v2:
- separate this error handle from healthy rating code. (Zhenyu)
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

When an error occurs in dispatch_workload, this patch is to do the
proper cleanup and rollback to the original states before the workload
is abandoned.

v2:
- split the mixed several error paths for better review. (Zhenyu)

v3:
- original PTR_ERR(cs) is good and code cleanup. (Zhenyu)

v4:
- reuse the existing i915_add_request for error handling. (Zhenyu)

v5:
- remove the duplicate error handling release_shadow_wa_ctx and
  move the engine->context_unpin upper. (Zhenyu)

v6:
- keep the old label "out". (Zhenyu)
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

When it is failed in shadow_mm, the pin_count should rollback
to the original states before return.

v2:
- split the mixed several error paths for better review. (Zhenyu)

v3:
  increase the pincount after shadow success. (Zhenyu)
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

refine the error handling for prepare_execlist_workload to restore to the
original states once error occurs.

only release the shadowed batch buffer and wa ctx when the workload is
completed successfully.

v2:
- split the mixed several error paths for better review. (Zhenyu)

v3:
- handle prepare batch buffer/wa ctx pin errors and
- emulate_schedule_in null issue. (Zhenyu)

v4:
- no need to handle emulate_schedule_in null issue. (Zhenyu)

v5:
- release the shadowed batch buffer and wa ctx only for the
  successful workload. (Zhenyu)

v6:
- polish the return style. (Zhenyu)
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

When an error occurs after shadow_indirect_ctx, this patch is to do the
proper cleanup and rollback to the original states for shadowed indirect
context before the workload is abandoned.

v2:
- split the mixed several error paths for better review. (Zhenyu)

v3:
- no return check for clean up functions. (Changbin)

v4:
- expose and reuse the existing release_shadow_wa_ctx. (Zhenyu)

v5:
- move the release function to scheduler.c file. (Zhenyu)

v6:
- move error handling code of intel_gvt_scan_and_shadow_workload
  to here. (Zhenyu)
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Currently i915 request structure and shadow ring buffer are allocated
before command scan, so it will have to restore to previous states once
any error happens afterwards in the long dispatch_workload path.

This patch is to introduce a reserved ring buffer created at the beginning
of vGPU initialization. Workload will be coped to this reserved buffer and
be scanned first, the i915 request and shadow ring buffer are only
allocated after the result of scan is successful.

To balance the memory usage and buffer alloc time, the coming bigger ring
buffer will be reallocated and kept until more bigger buffer is coming.

v2:
- use kmalloc for the smaller ring buffer, realloc if required. (Zhenyu)

v3:
- remove the dynamically allocated ring buffer. (Zhenyu)

v4:
- code style polish.
- kfree previous allocated buffer once kmalloc failed. (Zhenyu)
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

For vfio-pci, if the region support MMAP then it should support both
mmap and normal file access. The user-space is free to choose which is
being used. For qemu, we just need add 'x-no-mmap=on' for vfio-pci
option.

Currently GVTg only support MMAP for BAR2. So GVTg will not work when
user turn on x-no-mmap option.

This patch added file style access for BAR2, aka the GPU aperture. We
map the entire aperture partition of active vGPU to kernel space when
guest driver try to enable PCI Memory Space. Then we redirect the file
RW operation from kvmgt to this mapped area.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1458032Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

For PCI, 64bit bar consumes two BAR registers, but this doesn't mean
both of two BAR are valid. Actually the second BAR is regarded as
reserved in this case. So we shouldn't emulate the second BAR.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

FF_SLICE_CS_CHICKEN2 does not belong to the context image.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504798809-5653-6-git-send-email-oscar.mateo@intel.comSigned-off-by: Chris Wilson <chris@chris-wilson.co.uk>

GAMT_CHKN_BIT_REG does not live in the context image.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504798809-5653-5-git-send-email-oscar.mateo@intel.comSigned-off-by: Chris Wilson <chris@chris-wilson.co.uk>

GEN7_UCGCTL4 does not live in the context.

v2: Missing parenthesis

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504798809-5653-4-git-send-email-oscar.mateo@intel.comSigned-off-by: Chris Wilson <chris@chris-wilson.co.uk>

So do it correctly.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504798809-5653-3-git-send-email-oscar.mateo@intel.comSigned-off-by: Chris Wilson <chris@chris-wilson.co.uk>

GAMT_CHKN_BIT_REG does not live in the context.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504798809-5653-2-git-send-email-oscar.mateo@intel.comSigned-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Afaict, GEN9_GAMT_ECO_REG_RW_IA does not live in the context, so writing
it on every context creation is overkill (and wrong).

v2: Missing end parenthesis

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504798809-5653-1-git-send-email-oscar.mateo@intel.comSigned-off-by: Chris Wilson <chris@chris-wilson.co.uk>

We also see the delayed GTT write issue on i915g/i915gm, so let's
presume that it is a universal problem for all !llc machines, and that we
just haven't yet noticed on g33, gen4 and gen5 machines.

v2: Use a register that exists on all platforms

Testcase: igt/gem_mmap_gtt/coherency # i915gm
References: https://bugs.freedesktop.org/show_bug.cgi?id=102577Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907184520.5032-1-chris@chris-wilson.co.ukReviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm_pci_alloc() refuses to cooperate if the passed alignment exceeds the
object size. So round up the obj size to the next power of two as well
to make this actually work.

Obviously things work just fine as long as the size was a power of two
to begin with. However kms_cursor_crc doesn't always use power of two
sizes so we hit a failure when we try to allocate the phys memory.

Testcase: igt/kms_cursor_crc
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907143203.13055-1-ville.syrjala@linux.intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

If the user bypasses i915 and accesses mmio directly, that easily
confuses our automatic mmio debugging (any error we then detect is
likely to be as a result of the user). Since we expect userspace to open
debugfs/i915_forcewake_user if i915.ko is loaded and they want mmio
access, that makes the opportune time to disable our debugging for
duration of the bypass.

v2: Move the fiddling of uncore internals to uncore.c

References: https://bugs.freedesktop.org/show_bug.cgi?id=102543Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907134441.12881-1-chris@chris-wilson.co.uk

This patch creates an entry in debugfs to check the status of IPC.
This can also be used to enable/disable IPC in supported platforms.

Changes since V1:
 - fix use of HAS_IPC
 - use kstrtobool_from_user (Maarten)
 - drm_info log, while enabling IPC (Maarten)
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817134529.2839-9-mahesh1.kumar@intel.com
[mlankhorst: enableddisabled -> yesno to match ipc write]

This patch adds IPC support. This patch also enables IPC in all supported
platforms based on has_ipc flag.
IPC (Isochronous Priority Control) is the hardware feature, which
dynamically controls the memory read priority of Display.

When IPC is enabled, plane read requests are sent at high priority until
filling above the transition watermark, then the requests are sent at
lower priority until dropping below the level 0 watermark.
The lower priority requests allow other memory clients to have better
memory access. When IPC is disabled, all plane read requests are sent at
high priority.

Changes since V1:
 - Remove commandline parameter to disable ipc
 - Address Paulo's comments
Changes since V2:
 - Address review comments
 - Set ipc_enabled flag
Changes since V3:
 - move ipc_enabled flag assignment inside intel_ipc_enable function
Changes since V4:
 - Re-enable IPC after suspend/resume
Changes since V5:
 - Enable IPC for all gen >=9 except SKL
Changes since V6:
 - fix commit msg
 - after resume program IPC based on SW state.
Changes since V7:
 - Modify IPC support check based on HAS_IPC macro (suggested by Chris)
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817134529.2839-8-mahesh1.kumar@intel.com