Skip to content

L
linux
Switch branch/tag
  1. 07 Jun, 2015 7 commits
    • Sven Eckelmann's avatar
      batman-adv: Use common Jenkins Hash implementation · 36fd61cb
      Sven Eckelmann authored 
      An unoptimized version of the Jenkins one-at-a-time hash function is used
and partially copied all over the code wherever an hashtable is used.
Instead the optimized version shared between the whole kernel should be
used to reduce code duplication and use better optimized code.

Only the DAT code must use the old implementation because it is used as
distributed hash function which has to be common for all nodes.
Signed-off-by: default avatarSven Eckelmann <sven@narfation.org>
Signed-off-by: default avatarMarek Lindner <mareklindner@neomailbox.ch>
      36fd61cb
    • Alexei Starovoitov's avatar
      bpf: allow programs to write to certain skb fields · d691f9e8
      Alexei Starovoitov authored 
      allow programs read/write skb->mark, tc_index fields and
((struct qdisc_skb_cb *)cb)->data.

mark and tc_index are generically useful in TC.
cb[0]-cb[4] are primarily used to pass arguments from one
program to another called via bpf_tail_call() which can
be seen in sockex3_kern.c example.

All fields of 'struct __sk_buff' are readable to socket and tc_cls_act progs.
mark, tc_index are writeable from tc_cls_act only.
cb[0]-cb[4] are writeable by both sockets and tc_cls_act.

Add verifier tests and improve sample code.
Signed-off-by: default avatarAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d691f9e8
    • Alexei Starovoitov's avatar
      bpf: make programs see skb->data == L2 for ingress and egress · 3431205e
      Alexei Starovoitov authored 
      eBPF programs attached to ingress and egress qdiscs see inconsistent skb->data.
For ingress L2 header is already pulled, whereas for egress it's present.
This is known to program writers which are currently forced to use
BPF_LL_OFF workaround.
Since programs don't change skb internal pointers it is safe to do
pull/push right around invocation of the program and earlier taps and
later pt->func() will not be affected.
Multiple taps via packet_rcv(), tpacket_rcv() are doing the same trick
around run_filter/BPF_PROG_RUN even if skb_shared.

This fix finally allows programs to use optimized LD_ABS/IND instructions
without BPF_LL_OFF for higher performance.
tc ingress + cls_bpf + samples/bpf/tcbpf1_kern.o
       w/o JIT   w/JIT
before  20.5     23.6 Mpps
after   21.8     26.6 Mpps

Old programs with BPF_LL_OFF will still work as-is.

We can now undo most of the earlier workaround commit:
a166151c ("bpf: fix bpf helpers to use skb->mac_header relative offsets")
Signed-off-by: default avatarAlexei Starovoitov <ast@plumgrid.com>
Acked-by: default avatarJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3431205e
    • Eric Dumazet's avatar
      tcp: remove redundant checks II · 98da81a4
      Eric Dumazet authored 
      For same reasons than in commit 12e25e10 ("tcp: remove redundant
checks"), we can remove redundant checks done for timewait sockets.
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      98da81a4
    • Colin Ian King's avatar
      fddi: print an address with %p format specifier rather than %x · 908e80d6
      Colin Ian King authored 
      The debug is printing the struct smt_header * address using
the %x format specifier. Fix it to use %p instead.
Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      908e80d6
    • Nicholas Mc Guire's avatar
      wan: dscc4: fix build warning Wunused-but-set-variable · c5726d26
      Nicholas Mc Guire authored 
      Fix:
drivers/net/wan/dscc4.c: In function 'dscc4_open':
drivers/net/wan/dscc4.c:1049:25: warning: variable 'ppriv' set but not used
[-Wunused-but-set-variable]

This has been in there unused since 1da177e4 (Linux-2.6.12-rc2) simply
remove it.
Signed-off-by: default avatarNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c5726d26
    • Eric Dumazet's avatar
      inet: add IP_BIND_ADDRESS_NO_PORT to overcome bind(0) limitations · 90c337da
      Eric Dumazet authored 
      When an application needs to force a source IP on an active TCP socket
it has to use bind(IP, port=x).

As most applications do not want to deal with already used ports, x is
often set to 0, meaning the kernel is in charge to find an available
port.
But kernel does not know yet if this socket is going to be a listener or
be connected.
It has very limited choices (no full knowledge of final 4-tuple for a
connect())

With limited ephemeral port range (about 32K ports), it is very easy to
fill the space.

This patch adds a new SOL_IP socket option, asking kernel to ignore
the 0 port provided by application in bind(IP, port=0) and only
remember the given IP address.

The port will be automatically chosen at connect() time, in a way
that allows sharing a source port as long as the 4-tuples are unique.

This new feature is available for both IPv4 and IPv6 (Thanks Neal)

Tested:

Wrote a test program and checked its behavior on IPv4 and IPv6.

strace(1) shows sequences of bind(IP=127.0.0.2, port=0) followed by
connect().
Also getsockname() show that the port is still 0 right after bind()
but properly allocated after connect().

socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 5
setsockopt(5, SOL_IP, IP_BIND_ADDRESS_NO_PORT, [1], 4) = 0
bind(5, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("127.0.0.2")}, 16) = 0
getsockname(5, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("127.0.0.2")}, [16]) = 0
connect(5, {sa_family=AF_INET, sin_port=htons(53174), sin_addr=inet_addr("127.0.0.3")}, 16) = 0
getsockname(5, {sa_family=AF_INET, sin_port=htons(38050), sin_addr=inet_addr("127.0.0.2")}, [16]) = 0

IPv6 test :

socket(PF_INET6, SOCK_STREAM, IPPROTO_IP) = 7
setsockopt(7, SOL_IP, IP_BIND_ADDRESS_NO_PORT, [1], 4) = 0
bind(7, {sa_family=AF_INET6, sin6_port=htons(0), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 28) = 0
getsockname(7, {sa_family=AF_INET6, sin6_port=htons(0), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, [28]) = 0
connect(7, {sa_family=AF_INET6, sin6_port=htons(57300), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 28) = 0
getsockname(7, {sa_family=AF_INET6, sin6_port=htons(60964), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, [28]) = 0

I was able to bind()/connect() a million concurrent IPv4 sockets,
instead of ~32000 before patch.

lpaa23:~# ulimit -n 1000010
lpaa23:~# ./bind --connect --num-flows=1000000 &
1000000 sockets

lpaa23:~# grep TCP /proc/net/sockstat
TCP: inuse 2000063 orphan 0 tw 47 alloc 2000157 mem 66

Check that a given source port is indeed used by many different
connections :

lpaa23:~# ss -t src :40000 | head -10
State      Recv-Q Send-Q   Local Address:Port          Peer Address:Port
ESTAB      0      0           127.0.0.2:40000         127.0.202.33:44983
ESTAB      0      0           127.0.0.2:40000         127.2.27.240:44983
ESTAB      0      0           127.0.0.2:40000           127.2.98.5:44983
ESTAB      0      0           127.0.0.2:40000        127.0.124.196:44983
ESTAB      0      0           127.0.0.2:40000         127.2.139.38:44983
ESTAB      0      0           127.0.0.2:40000          127.1.59.80:44983
ESTAB      0      0           127.0.0.2:40000          127.3.6.228:44983
ESTAB      0      0           127.0.0.2:40000          127.0.38.53:44983
ESTAB      0      0           127.0.0.2:40000         127.1.197.10:44983
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      90c337da
  3. 06 Jun, 2015 8 commits
  5. 04 Jun, 2015 25 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7