- 11 Dec, 2019 40 commits
-
-
Tudor Ambarus authored
The req->iv of the skcipher_request is expected to contain the last used IV. Update the req->iv for CTR mode. Fixes: bd3c7b5c ("crypto: atmel - add Atmel AES driver") Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Tudor Ambarus authored
32 bit counter is not supported by neither of our AES IPs, all implement a 16 bit block counter. Drop the 32 bit block counter logic. Fixes: fcac8365 ("crypto: atmel-aes - fix the counter overflow in CTR mode") Signed-off-by:
-
Tudor Ambarus authored
ECB mode does not use IV. Signed-off-by:
-
Tudor Ambarus authored
atmel_tdes_crypt_start() obtained a pointer to tfm from dd, passed the tfm pointer to atmel_tdes_crypt_{dma,pdc}, and in the calles we obtained dd back from the tfm. Pass pointer to dd directly. Signed-off-by: -
Tudor Ambarus authored
Simplifies the configuration of the TDES IP. Signed-off-by:
-
Tudor Ambarus authored
As claimed by the datasheet, writing 0 into the Control Register has no effect. Remove this useless register access. Signed-off-by:
-
Tudor Ambarus authored
Choose label names which say what the goto does and not from where the goto was issued. This avoids adding superfluous labels like "err_aes_buff". Signed-off-by:
-
Tudor Ambarus authored
In case the probe fails, the device/driver core takes care of printing the driver name, device name and error code. Drop superfluous error message at probe. Signed-off-by:
-
Tudor Ambarus authored
atmel_{sha,tdes}_hw_version_init() calls atmel_{sha,tdes}_hw_init(), which may fail. Check the return code of atmel_{sha,tdes}_hw_init() and propagate the error if needed. Signed-off-by: -
Tudor Ambarus authored
Hash headers are not used. Signed-off-by:
-
Tudor Ambarus authored
Increase the algorithm priorities so the hardware acceleration is now preferred to the software computation: the generic drivers use 100 as priority. Signed-off-by:
-
Tudor Ambarus authored
atmel_tdes_write_n() should not modify its value argument. Signed-off-by:
-
Herbert Xu authored
As af_alg_release_parent may be called from BH context (most notably due to an async request that only completes after socket closure, or as reported here because of an RCU-delayed sk_destruct call), we must use bh_lock_sock instead of lock_sock. Reported-by: syzbot+c2f1558d49e25cc36e5e@syzkaller.appspotmail.com Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Fixes: c840ac6a ("crypto: af_alg - Disallow bind/setkey/...") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Daniel Jordan authored
Remove references to unused functions, standardize language, update to reflect new functionality, migrate to rst format, and fix all kernel-doc warnings. Fixes: 815613da ("kernel/padata.c: removed unused code") Signed-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-crypto@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Daniel Jordan authored
reorder_objects is unused since the rework of padata's flushing, so remove it. Signed-off-by:
-
Daniel Jordan authored
Since commit 63d35788 ("crypto: pcrypt - remove padata cpumask notifier") this feature is unused, so get rid of it. Signed-off-by:
-
Daniel Jordan authored
lockdep complains when padata's paths to update cpumasks via CPU hotplug and sysfs are both taken: # echo 0 > /sys/devices/system/cpu/cpu1/online # echo ff > /sys/kernel/pcrypt/pencrypt/parallel_cpumask ====================================================== WARNING: possible circular locking dependency detected 5.4.0-rc8-padata-cpuhp-v3+ #1 Not tainted ------------------------------------------------------ bash/205 is trying to acquire lock: ffffffff8286bcd0 (cpu_hotplug_lock.rw_sem){++++}, at: padata_set_cpumask+0x2b/0x120 but task is already holding lock: ffff8880001abfa0 (&pinst->lock){+.+.}, at: padata_set_cpumask+0x26/0x120 which lock already depends on the new lock. padata doesn't take cpu_hotplug_lock and pinst->lock in a consistent order. Which should be first? CPU hotplug calls into padata with cpu_hotplug_lock already held, so it should have priority. Fixes: 6751fb3c ("padata: Use get_online_cpus/put_online_cpus") Signed-off-by: -
Daniel Jordan authored
Configuring an instance's parallel mask without any online CPUs... echo 2 > /sys/kernel/pcrypt/pencrypt/parallel_cpumask echo 0 > /sys/devices/system/cpu/cpu1/online ...makes tcrypt mode=215 crash like this: divide error: 0000 [#1] SMP PTI CPU: 4 PID: 283 Comm: modprobe Not tainted 5.4.0-rc8-padata-doc-v2+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191013_105130-anatol 04/01/2014 RIP: 0010:padata_do_parallel+0x114/0x300 Call Trace: pcrypt_aead_encrypt+0xc0/0xd0 [pcrypt] crypto_aead_encrypt+0x1f/0x30 do_mult_aead_op+0x4e/0xdf [tcrypt] test_mb_aead_speed.constprop.0.cold+0x226/0x564 [tcrypt] do_test+0x28c2/0x4d49 [tcrypt] tcrypt_mod_init+0x55/0x1000 [tcrypt] ... cpumask_weight() in padata_cpu_hash() returns 0 because the mask has no CPUs. The problem is __padata_remove_cpu() checks for valid masks too early and so doesn't mark the instance PADATA_INVALID as expected, which would have made padata_do_parallel() return error before doing the division. Fix by introducing a second padata CPU hotplug state before CPUHP_BRINGUP_CPU so that __padata_remove_cpu() sees the online mask without @cpu. No need for the second argument to padata_replace() since @cpu is now already missing from the online mask. Fixes: 33e54450 ("padata: Handle empty padata cpumasks") Signed-off-by:
-
Eric Biggers authored
Of the three fields in crt_u.cipher (struct cipher_tfm), ->cit_setkey() is pointless because it always points to setkey() in crypto/cipher.c. ->cit_decrypt_one() and ->cit_encrypt_one() are slightly less pointless, since if the algorithm doesn't have an alignmask, they are set directly to ->cia_encrypt() and ->cia_decrypt(). However, this "optimization" isn't worthwhile because: - The "cipher" algorithm type is the only algorithm still using crt_u, so it's bloating every struct crypto_tfm for every algorithm type. - If the algorithm has an alignmask, this "optimization" actually makes things slower, as it causes 2 indirect calls per block rather than 1. - It adds extra code complexity. - Some templates already call ->cia_encrypt()/->cia_decrypt() directly instead of going through ->cit_encrypt_one()/->cit_decrypt_one(). - The "cipher" algorithm type never gives optimal performance anyway. For that, a higher-level type such as skcipher needs to be used. Therefore, just remove the extra indirection, and make crypto_cipher_setkey(), crypto_cipher_encrypt_one(), and crypto_cipher_decrypt_one() be direct calls into crypto/cipher.c. Also remove the unused function crypto_cipher_cast(). Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
crt_u.compress (struct compress_tfm) is pointless because its two fields, ->cot_compress() and ->cot_decompress(), always point to crypto_compress() and crypto_decompress(). Remove this pointless indirection, and just make crypto_comp_compress() and crypto_comp_decompress() be direct calls to what used to be crypto_compress() and crypto_decompress(). Also remove the unused function crypto_comp_cast(). Signed-off-by:
-
Eric Biggers authored
The whole point of using an AEAD over length-preserving encryption is that the data is authenticated. However currently the fuzz tests don't test any inauthentic inputs to verify that the data is actually being authenticated. And only two algorithms ("rfc4543(gcm(aes))" and "ccm(aes)") even have any inauthentic test vectors at all. Therefore, update the AEAD fuzz tests to sometimes generate inauthentic test vectors, either by generating a (ciphertext, AAD) pair without using the key, or by mutating an authentic pair that was generated. To avoid flakiness, only assume this works reliably if the auth tag is at least 8 bytes. Also account for the rfc4106, rfc4309, and rfc7539esp algorithms intentionally ignoring the last 8 AAD bytes, and for some algorithms doing extra checks that result in EINVAL rather than EBADMSG. Signed-off-by: -
Eric Biggers authored
In preparation for adding inauthentic input fuzz tests, which don't require that a generic implementation of the algorithm be available, refactor test_aead_vs_generic_impl() so that instead there's a higher-level function test_aead_extra() which initializes a struct aead_extra_tests_ctx and then calls test_aead_vs_generic_impl() with a pointer to that struct. As a bonus, this reduces stack usage. Also switch from crypto_aead_alg(tfm)->maxauthsize to crypto_aead_maxauthsize(), now that the latter is available in <crypto/aead.h>. Signed-off-by:
-
Eric Biggers authored
The alignment bug in ghash_setkey() fixed by commit 5c6bc4df ("crypto: ghash - fix unaligned memory access in ghash_setkey()") wasn't reliably detected by the crypto self-tests on ARM because the tests only set the keys directly from the test vectors. To improve test coverage, update the tests to sometimes pass misaligned keys to setkey(). This applies to shash, ahash, skcipher, and aead. Signed-off-by:
-
Eric Biggers authored
When checking two implementations of the same skcipher algorithm for consistency, require that the minimum key size be the same, not just the maximum key size. There's no good reason to allow different minimum key sizes. Signed-off-by:
-
Eric Biggers authored
Currently if the comparison fuzz tests encounter an encryption error when generating an skcipher or AEAD test vector, they will still test the decryption side (passing it the uninitialized ciphertext buffer) and expect it to fail with the same error. This is sort of broken because it's not well-defined usage of the API to pass an uninitialized buffer, and furthermore in the AEAD case it's acceptable for the decryption error to be EBADMSG (meaning "inauthentic input") even if the encryption error was something else like EINVAL. Fix this for skcipher by explicitly initializing the ciphertext buffer on error, and for AEAD by skipping the decryption test on error. Reported-by:
Pascal Van Leeuwen <pvanleeuwen@verimatrix.com> Fixes: d435e10e ("crypto: testmgr - fuzz skciphers against their generic implementation") Fixes: 40153b10 ("crypto: testmgr - fuzz AEADs against their generic implementation") Signed-off-by:
-
Eric Biggers authored
Add a helper function crypto_skcipher_min_keysize() to mirror crypto_skcipher_max_keysize(). This will be used by the self-tests. Signed-off-by:
-
Eric Biggers authored
Move crypto_aead_maxauthsize() to <crypto/aead.h> so that it's available to users of the API, not just AEAD implementations. This will be used by the self-tests. Signed-off-by:
-
Tero Kristo authored
Both source and destination are scatterlists that can contain multiple entries under the omap crypto cleanup handling. Current code only copies data from the first source scatterlist entry to the target scatterlist, potentially omitting any sg entries following the first one. Instead, implement a new routine that walks through both source and target and copies the data over once it goes. Signed-off-by:
Tero Kristo <t-kristo@ti.com> Signed-off-by:
-
Tero Kristo authored
If no data is provided for DES request, just return immediately. No processing is needed in this case. Signed-off-by:
-
Tero Kristo authored
Remove the error print in this case, and just return the error. Signed-off-by:
-
Tero Kristo authored
Currently omap-aes-gcm algorithms are using local implementation for crypto request queuing logic. Instead, implement this via usage of crypto engine which is used already for rest of the omap aes algorithms. This avoids some random conflicts / crashes also which can happen if both aes and aes-gcm are attempted to be used simultaneously. Signed-off-by:
-
Tero Kristo authored
Currently the offset for unaligned sg lists is not handled properly leading into wrong results with certain testmgr self tests. Fix the handling to account for proper offset within the current sg list. Signed-off-by:
-
Tero Kristo authored
If we only have assocdata with an omap-aes-gcm, it currently just completes it directly without passing it over to the crypto HW. This produces wrong results. Fix by passing the request down to the crypto HW, and fix the DMA support code to accept a case where we don't expect any output data. In the case where only assocdata is provided, it just passes through the accelerator and provides authentication results, without any encrypted/decrypted buffer via DMA. Signed-off-by:
-
Ard Biesheuvel authored
The OMAP AES-GCM implementation uses a fallback ecb(aes) skcipher to produce the keystream to encrypt the output tag. Let's use the new AES library instead - this is much simpler, and shouldn't affect performance given that it only involves a single block. Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Reviewed-by:
-
Ard Biesheuvel authored
RFC4106 requires the associated data to be a certain size, so reject inputs that are wrong. This also prevents crashes or other problems due to assoclen becoming negative after subtracting 8 bytes. Signed-off-by:
-
Ard Biesheuvel authored
GCM only permits certain tag lengths, so populate the .setauthsize hooks which ensure that only permitted sizes are accepted by the implementation. Signed-off-by:
-
Ard Biesheuvel authored
The OMAP gcm(aes) driver invokes omap_crypto_align_sg() without dealing with the errors it may return, resulting in a crash if the routine fails in a __get_free_pages(GFP_ATOMIC) call. So bail and return the error rather than limping on if one occurs. Signed-off-by:
-
Ard Biesheuvel authored
CTR is a streamcipher mode of AES, so set the blocksize accordingly. Signed-off-by:
-
Ard Biesheuvel authored
Block modes such as ECB and CBC only support input sizes that are a round multiple of the block size, so align with the generic code which returns -EINVAL when encountering inputs that violate this rule. Signed-off-by:
-
Tero Kristo authored
Aligned data cleanup is using wrong pointers in the cleanup calls. Most of the time these are right, but can cause mysterious problems in some cases. Fix to use the same pointers that were used with the align call. Signed-off-by:
-
