- 01 Apr, 2019 14 commits
-
-
Logan Gunthorpe authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit cc29a1b0 ] scsi_mq_setup_tags(), which is called by scsi_add_host(), calculates the command size to allocate based on the prot_capabilities. In the isci driver, scsi_host_set_prot() is called after scsi_add_host() so the command size gets calculated to be smaller than it needs to be. Eventually, scsi_mq_init_request() locates the 'prot_sdb' after the command assuming it was sized correctly and a buffer overrun may occur. However, seeing blk_mq_alloc_rqs() rounds up to the nearest cache line size, the mistake can go unnoticed. The bug was noticed after the struct request size was reduced by commit 9d037ad7 ("block: remove req->timeout_list") Which likely reduced the allocated space for the request by an entire cache line, enough that the overflow could be hit and it caused a panic, on boot, at: RIP: 0010:t10_pi_complete+0x77/0x1c0 Call Trace: <IRQ> sd_done+0xf5/0x340 scsi_finish_command+0xc3/0x120 blk_done_softirq+0x83/0xb0 __do_softirq+0xa1/0x2e6 irq_exit+0xbc/0xd0 call_function_single_interrupt+0xf/0x20 </IRQ> sd_done() would call scsi_prot_sg_count() which reads the number of entities in 'prot_sdb', but seeing 'prot_sdb' is located after the end of the allocated space it reads a garbage number and erroneously calls t10_pi_complete(). To prevent this, the calls to scsi_host_set_prot() are moved into isci_host_alloc() before the call to scsi_add_host(). Out of caution, also move the similar call to scsi_host_set_guard(). Fixes: 3d2d7525 ("[SCSI] isci: T10 DIF support") Link: http://lkml.kernel.org/r/da851333-eadd-163a-8c78-e1f4ec5ec857@deltatee.comSigned-off-by:
Logan Gunthorpe <logang@deltatee.com> Cc: Intel SCU Linux support <intel-linux-scu@intel.com> Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jeff Moyer <jmoyer@redhat.com> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Acked-by:
Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 72b4a046 ] The return code should be check while qla4xxx_copy_from_fwddb_param fails. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
-
Alban Bedel authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 565dc8a4 ] CONFIG_SERIAL_OF_PLATFORM is needed to get a working console on the OF boards, enable it in the default config to get a working setup out of the box. Signed-off-by:
Alban Bedel <albeu@free.fr> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Yonglong Liu authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit bb989501 ] When enable SLUB debug, than remove hns_enet_drv module, SLUB debug will identify a use after free bug: [134.189505] Unable to handle kernel paging request at virtual address 006b6b6b6b6b6b6b [134.197553] Mem abort info: [134.200381] ESR = 0x96000004 [134.203487] Exception class = DABT (current EL), IL = 32 bits [134.209497] SET = 0, FnV = 0 [134.212596] EA = 0, S1PTW = 0 [134.215777] Data abort info: [134.218701] ISV = 0, ISS = 0x00000004 [134.222596] CM = 0, WnR = 0 [134.225606] [006b6b6b6b6b6b6b] address between user and kernel address ranges [134.232851] Internal error: Oops: 96000004 [#1] SMP [134.237798] CPU: 21 PID: 27834 Comm: rmmod Kdump: loaded Tainted: G OE 4.19.5-1.2.34.aarch64 #1 [134.247856] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.58 10/24/2018 [134.255181] pstate: 20000005 (nzCv daif -PAN -UAO) [134.260044] pc : hns_ae_put_handle+0x38/0x60 [134.264372] lr : hns_ae_put_handle+0x24/0x60 [134.268700] sp : ffff00001be93c50 [134.272054] x29: ffff00001be93c50 x28: ffff802faaec8040 [134.277442] x27: 0000000000000000 x26: 0000000000000000 [134.282830] x25: 0000000056000000 x24: 0000000000000015 [134.288284] x23: ffff0000096fe098 x22: ffff000001050070 [134.293671] x21: ffff801fb3c044a0 x20: ffff80afb75ec098 [134.303287] x19: ffff80afb75ec098 x18: 0000000000000000 [134.312945] x17: 0000000000000000 x16: 0000000000000000 [134.322517] x15: 0000000000000002 x14: 0000000000000000 [134.332030] x13: dead000000000100 x12: ffff7e02bea3c988 [134.341487] x11: ffff80affbee9e68 x10: 0000000000000000 [134.351033] x9 : 6fffff8000008101 x8 : 0000000000000000 [134.360569] x7 : dead000000000100 x6 : ffff000009579748 [134.370059] x5 : 0000000000210d00 x4 : 0000000000000000 [134.379550] x3 : 0000000000000001 x2 : 0000000000000000 [134.388813] x1 : 6b6b6b6b6b6b6b6b x0 : 0000000000000000 [134.397993] Process rmmod (pid: 27834, stack limit = 0x00000000d474b7fd) [134.408498] Call trace: [134.414611] hns_ae_put_handle+0x38/0x60 [134.422208] hnae_put_handle+0xd4/0x108 [134.429563] hns_nic_dev_remove+0x60/0xc0 [hns_enet_drv] [134.438342] platform_drv_remove+0x2c/0x70 [134.445958] device_release_driver_internal+0x174/0x208 [134.454810] driver_detach+0x70/0xd8 [134.461913] bus_remove_driver+0x64/0xe8 [134.469396] driver_unregister+0x34/0x60 [134.476822] platform_driver_unregister+0x20/0x30 [134.485130] hns_nic_dev_driver_exit+0x14/0x6e4 [hns_enet_drv] [134.494634] __arm64_sys_delete_module+0x238/0x290 struct hnae_handle is a member of struct hnae_vf_cb, so when vf_cb is freed, than use hnae_handle will cause use after free panic. This patch frees vf_cb after hnae_handle used. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Kangjie Lu authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 9e28989d ] When mc13xxx_reg_read() fails, "old_adc0" is uninitialized and will contain random value. Further execution uses "old_adc0" even when mc13xxx_reg_read() fails. The fix checks the return value of mc13xxx_reg_read(), and exits the execution when it fails. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Charles Keepax authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 04c801c1 ] Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Jonathan Marek authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 504e4175 ] This is required as part of the initialization sequence on certain SoCs. If these registers are not initialized, the hardware can be unresponsive. This fixes the driver on apq8060 (HP TouchPad device). Signed-off-by:
Jonathan Marek <jonathan@marek.ca> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 10628e3e ] This function is supposed to return zero on success or negative error codes on error. Unfortunately, there is a bug so it sometimes returns non-zero, positive numbers on success. I noticed this bug during review and I can't test it. It does appear that the return is sometimes propogated back to _regmap_read() where all non-zero returns are treated as failure so this may affect run time. Fixes: 47c16975 ("mfd: Align ab8500 with the abx500 interface") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit a3888f62 ] When building the kernel with Clang, the following section mismatch warnings appear: WARNING: vmlinux.o(.text+0x7239cc): Section mismatch in reference from the function db8500_prcmu_probe() to the function .init.text:init_prcm_registers() The function db8500_prcmu_probe() references the function __init init_prcm_registers(). This is often because db8500_prcmu_probe lacks a __init annotation or the annotation of init_prcm_registers is wrong. WARNING: vmlinux.o(.text+0x723e28): Section mismatch in reference from the function db8500_prcmu_probe() to the function .init.text:fw_project_name() The function db8500_prcmu_probe() references the function __init fw_project_name(). This is often because db8500_prcmu_probe lacks a __init annotation or the annotation of fw_project_name is wrong. db8500_prcmu_probe should not be marked as __init so remove the __init annotation from fw_project_name and init_prcm_registers. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit 88385550 ] When building the kernel with Clang, the following section mismatch warning appears: WARNING: vmlinux.o(.text+0x3d84a3b): Section mismatch in reference from the function twl_probe() to the function .init.text:unprotect_pm_master() The function twl_probe() references the function __init unprotect_pm_master(). This is often because twl_probe lacks a __init annotation or the annotation of unprotect_pm_master is wrong. Remove the __init annotation on the *protect_pm_master functions so there is no more mismatch. Signed-off-by:
-
Vignesh R authored
BugLink: https://bugs.launchpad.net/bugs/1822271 [ Upstream commit b40ee006 ] Use PLATFORM_DEVID_AUTO to number mfd cells while registering, so that different instances are uniquely identified. This is required in order to support registering of multiple instances of same ti_am335x_tscadc IP. Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit a08bf91c upstream. If the sysctl 'kernel.keys.maxkeys' is set to some number n, then actually users can only add up to 'n - 1' keys. Likewise for 'kernel.keys.maxbytes' and the root_* versions of these sysctls. But these sysctls are apparently supposed to be *maximums*, as per their names and all documentation I could find -- the keyrings(7) man page, Documentation/security/keys/core.rst, and all the mentions of EDQUOT meaning that the key quota was *exceeded* (as opposed to reached). Thus, fix the code to allow reaching the quotas exactly. Fixes: 0b77f5bf ("keys: make the keyring quotas controllable through /proc/sys") Cc: stable@vger.kernel.org Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
James Morris <james.morris@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Ralph Campbell authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 050c17f2 upstream. The system call, get_mempolicy() [1], passes an unsigned long *nodemask pointer and an unsigned long maxnode argument which specifies the length of the user's nodemask array in bits (which is rounded up). The manual page says that if the maxnode value is too small, get_mempolicy will return EINVAL but there is no system call to return this minimum value. To determine this value, some programs search /proc/<pid>/status for a line starting with "Mems_allowed:" and use the number of digits in the mask to determine the minimum value. A recent change to the way this line is formatted [2] causes these programs to compute a value less than MAX_NUMNODES so get_mempolicy() returns EINVAL. Change get_mempolicy(), the older compat version of get_mempolicy(), and the copy_nodes_to_user() function to use nr_node_ids instead of MAX_NUMNODES, thus preserving the defacto method of computing the minimum size for the nodemask array and the maxnode argument. [1] http://man7.org/linux/man-pages/man2/get_mempolicy.2.html [2] https://lore.kernel.org/lkml/1545405631-6808-1-git-send-email-longman@redhat.com Link: http://lkml.kernel.org/r/20190211180245.22295-1-rcampbell@nvidia.com Fixes: 4fb8e5b89bcbbbb ("include/linux/nodemask.h: use nr_node_ids (not MAX_NUMNODES) in __nodemask_pr_numnodes()") Signed-off-by:
Ralph Campbell <rcampbell@nvidia.com> Suggested-by:
Alexander Duyck <alexander.duyck@gmail.com> Cc: Waiman Long <longman@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Yan, Zheng authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 04242ff3 upstream. Otherwise, mdsc->snap_flush_list may get corrupted. Cc: stable@vger.kernel.org Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Reviewed-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
- 31 Mar, 2019 3 commits
-
-
Po-Hsu Lin authored
BugLink: https://bugs.launchpad.net/bugs/1819881 Enable the Hi-DPI 16x32 font support. Also enable the compiled-in font support. Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Amanoel Dawod authored
BugLink: https://bugs.launchpad.net/bugs/1819881 This patch adds an option to compile-in a high resolution and large Terminus (ter16x32) bitmap console font for use with HiDPI and Retina screens. The font was convereted from standard Terminus ter-i32b.psf (size 16x32) with the help of psftools and minor hand editing deleting useless characters. This patch is non-intrusive, no options are enabled by default so most users won't notice a thing. I am placing my changes under the GPL 2.0 just as source Terminus font. Signed-off-by:
Amanoel Dawod <amanoeladawod@gmail.com> Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1819881 Keep fonts together and indented (in menu) as much as possible. This moves the Sparc font choices to the end of the menu since they have different dependencies. Link: http://lkml.kernel.org/r/de6d8977-c6d6-a82d-c953-f2a2fefdb8a5@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
- 28 Mar, 2019 4 commits
-
-
Prasad Sodagudi authored
BugLink: https://bugs.launchpad.net/bugs/1821259 When cpu_stop_queue_work() releases the lock for the stopper thread that was queued into its wake queue, preemption is enabled, which leads to the following deadlock: CPU0 CPU1 sched_setaffinity(0, ...) __set_cpus_allowed_ptr() stop_one_cpu(0, ...) stop_two_cpus(0, 1, ...) cpu_stop_queue_work(0, ...) cpu_stop_queue_two_works(0, ..., 1, ...) -grabs lock for migration/0- -spins with preemption disabled, waiting for migration/0's lock to be released- -adds work items for migration/0 and queues migration/0 to its wake_q- -releases lock for migration/0 and preemption is enabled- -current thread is preempted, and __set_cpus_allowed_ptr has changed the thread's cpu allowed mask to CPU1 only- -acquires migration/0 and migration/1's locks- -adds work for migration/0 but does not add migration/0 to wake_q, since it is already in a wake_q- -adds work for migration/1 and adds migration/1 to its wake_q- -releases migration/0 and migration/1's locks, wakes migration/1, and enables preemption- -since migration/1 is requested to run, migration/1 begins to run and waits on migration/0, but migration/0 will never be able to run, since the thread that can wake it is affine to CPU1- Disable preemption in cpu_stop_queue_work() before queueing works for stopper threads, and queueing the stopper thread in the wake queue, to ensure that the operation of queueing the works and waking the stopper threads is atomic. Fixes: 0b26351b ("stop_machine, sched: Fix migrate_swap() vs. active_balance() deadlock") Signed-off-by:
Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by:
Isaac J. Manjarres <isaacm@codeaurora.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Cc: matt@codeblueprint.co.uk Cc: bigeasy@linutronix.de Cc: gregkh@linuxfoundation.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1533329766-4856-1-git-send-email-isaacm@codeaurora.orgCo-Developed-by:
Mauricio Faria de Oliveira <mfo@canonical.com> Acked-by:
Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Signed-off-by:
-
Isaac J. Manjarres authored
BugLink: https://bugs.launchpad.net/bugs/1821259 This commit: 9fb8d5dc ("stop_machine, Disable preemption when waking two stopper threads") does not fully address the race condition that can occur as follows: On one CPU, call it CPU 3, thread 1 invokes cpu_stop_queue_two_works(2, 3,...), and the execution is such that thread 1 queues the works for migration/2 and migration/3, and is preempted after releasing the locks for migration/2 and migration/3, but before waking the threads. Then, On CPU 2, a kworker, call it thread 2, is running, and it invokes cpu_stop_queue_two_works(1, 2,...), such that thread 2 queues the works for migration/1 and migration/2. Meanwhile, on CPU 3, thread 1 resumes execution, and wakes migration/2 and migration/3. This means that when CPU 2 releases the locks for migration/1 and migration/2, but before it wakes those threads, it can be preempted by migration/2. If thread 2 is preempted by migration/2, then migration/2 will execute the first work item successfully, since migration/3 was woken up by CPU 3, but when it goes to execute the second work item, it disables preemption, calls multi_cpu_stop(), and thus, CPU 2 will wait forever for migration/1, which should have been woken up by thread 2. However migration/1 cannot be woken up by thread 2, since it is a kworker, so it is affine to CPU 2, but CPU 2 is running migration/2 with preemption disabled, so thread 2 will never run. Disable preemption after queueing works for stopper threads to ensure that the operation of queueing the works and waking the stopper threads is atomic. Co-Developed-by:
Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bigeasy@linutronix.de Cc: gregkh@linuxfoundation.org Cc: matt@codeblueprint.co.uk Fixes: 9fb8d5dc ("stop_machine, Disable preemption when waking two stopper threads") Link: http://lkml.kernel.org/r/1531856129-9871-1-git-send-email-isaacm@codeaurora.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> (backported from commit 2610e889) [mfo: backport: refresh context lines] Signed-off-by:
-
Isaac J. Manjarres authored
BugLink: https://bugs.launchpad.net/bugs/1821259 When cpu_stop_queue_two_works() begins to wake the stopper threads, it does so without preemption disabled, which leads to the following race condition: The source CPU calls cpu_stop_queue_two_works(), with cpu1 as the source CPU, and cpu2 as the destination CPU. When adding the stopper threads to the wake queue used in this function, the source CPU stopper thread is added first, and the destination CPU stopper thread is added last. When wake_up_q() is invoked to wake the stopper threads, the threads are woken up in the order that they are queued in, so the source CPU's stopper thread is woken up first, and it preempts the thread running on the source CPU. The stopper thread will then execute on the source CPU, disable preemption, and begin executing multi_cpu_stop(), and wait for an ack from the destination CPU's stopper thread, with preemption still disabled. Since the worker thread that woke up the stopper thread on the source CPU is affine to the source CPU, and preemption is disabled on the source CPU, that thread will never run to dequeue the destination CPU's stopper thread from the wake queue, and thus, the destination CPU's stopper thread will never run, causing the source CPU's stopper thread to wait forever, and stall. Disable preemption when waking the stopper threads in cpu_stop_queue_two_works(). Fixes: 0b26351b ("stop_machine, sched: Fix migrate_swap() vs. active_balance() deadlock") Co-Developed-by:
-
Peter Zijlstra authored
BugLink: https://bugs.launchpad.net/bugs/1821259 Matt reported the following deadlock: CPU0 CPU1 schedule(.prev=migrate/0) <fault> pick_next_task() ... idle_balance() migrate_swap() active_balance() stop_two_cpus() spin_lock(stopper0->lock) spin_lock(stopper1->lock) ttwu(migrate/0) smp_cond_load_acquire() -- waits for schedule() stop_one_cpu(1) spin_lock(stopper1->lock) -- waits for stopper lock Fix this deadlock by taking the wakeups out from under stopper->lock. This allows the active_balance() to queue the stop work and finish the context switch, which in turn allows the wakeup from migrate_swap() to observe the context and complete the wakeup. Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by:
-
- 26 Mar, 2019 4 commits
-
-
Stefan Bader authored
Signed-off-by: -
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1821724Signed-off-by:
-
Stefan Bader authored
We must depend on linux-base with a minimum version specified after having pulled all the other packaging changes. BugLink: https://bugs.launchpad.net/bugs/1820419Signed-off-by:
-
Stefan Bader authored
Ignore: yes Signed-off-by:
-
- 14 Mar, 2019 15 commits
-
-
Stefan Bader authored
Signed-off-by: -
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1819660Signed-off-by:
-
Stefan Bader authored
BugLink: http://bugs.launchpad.net/bugs/1786013Signed-off-by:
-
Stefan Bader authored
BugLink: http://bugs.launchpad.net/bugs/1786013Signed-off-by:
-
Stefan Bader authored
BugLink: http://bugs.launchpad.net/bugs/1786013Signed-off-by:
-
Ignat Loskutov authored
BugLink: https://bugs.launchpad.net/bugs/1396654 HAVE_CPLUS_DEMANGLE_SUPPORT=1 used to be spelled incorrectly, leading to missing C++ demangling support in perf. Signed-off-by:
Ignat Loskutov <ignat.loskutov@gmail.com> Acked-by:
You-Sheng Yang <vicamo.yang@canonical.com> Signed-off-by:
-
Jann Horn authored
security_mmap_addr() does a capability check with current_cred(), but we can reach this code from contexts like a VFS write handler where current_cred() must not be used. This can be abused on systems without SMAP to make NULL pointer dereferences exploitable again. Fixes: 8869477a ("security: protect from stack expansion into low vm addresses") Cc: stable@kernel.org Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Acked-By:
-
Marcel Holtmann authored
When doing option parsing for standard type values of 1, 2 or 4 octets, the value is converted directly into a variable instead of a pointer. To avoid being tricked into being a pointer, check that for these option types that sizes actually match. In L2CAP every option is fixed size and thus it is prudent anyway to ensure that the remote side sends us the right option size along with option paramters. If the option size is not matching the option type, then that option is silently ignored. It is a protocol violation and instead of trying to give the remote attacker any further hints just pretend that option is not present and proceed with the default values. Implementation following the specification and its qualification procedures will always use the correct size and thus not being impacted here. To keep the code readable and consistent accross all options, a few cosmetic changes were also required. CVE-2019-3460 Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Reviewed-by:
Johan Hedberg <johan.hedberg@intel.com> (cherry picked from commit af3d5d1c) Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1818815Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1818815 commit 63530aba upstream. syzbot found that ax25 routes where not properly protected against concurrent use [1]. In this particular report the bug happened while copying ax25->digipeat. Fix this problem by making sure we call ax25_get_route() while ax25_route_lock is held, so that no modification could happen while using the route. The current two ax25_get_route() callers do not sleep, so this change should be fine. Once we do that, ax25_get_route() no longer needs to grab a reference on the found route. [1] ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de BUG: KASAN: use-after-free in memcpy include/linux/string.h:352 [inline] BUG: KASAN: use-after-free in kmemdup+0x42/0x60 mm/util.c:113 Read of size 66 at addr ffff888066641a80 by task syz-executor2/531 ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de CPU: 1 PID: 531 Comm: syz-executor2 Not tainted 5.0.0-rc2+ #10 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1db/0x2d0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x24/0x50 mm/kasan/common.c:130 memcpy include/linux/string.h:352 [inline] kmemdup+0x42/0x60 mm/util.c:113 kmemdup include/linux/string.h:425 [inline] ax25_rt_autobind+0x25d/0x750 net/ax25/ax25_route.c:424 ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1224 __sys_connect+0x357/0x490 net/socket.c:1664 __do_sys_connect net/socket.c:1675 [inline] __se_sys_connect net/socket.c:1672 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1672 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458099 Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f870ee22c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458099 RDX: 0000000000000048 RSI: 0000000020000080 RDI: 0000000000000005 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de R10: 0000000000000000 R11: 0000000000000246 R12: 00007f870ee236d4 R13: 00000000004be48e R14: 00000000004ce9a8 R15: 00000000ffffffff Allocated by task 526: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc mm/kasan/common.c:496 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504 ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609 kmalloc include/linux/slab.h:545 [inline] ax25_rt_add net/ax25/ax25_route.c:95 [inline] ax25_rt_ioctl+0x3b9/0x1270 net/ax25/ax25_route.c:233 ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763 sock_do_ioctl+0xe2/0x400 net/socket.c:950 sock_ioctl+0x32f/0x6c0 net/socket.c:1074 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de Freed by task 550: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:458 kasan_slab_free+0xe/0x10 mm/kasan/common.c:466 __cache_free mm/slab.c:3487 [inline] kfree+0xcf/0x230 mm/slab.c:3806 ax25_rt_add net/ax25/ax25_route.c:92 [inline] ax25_rt_ioctl+0x304/0x1270 net/ax25/ax25_route.c:233 ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763 sock_do_ioctl+0xe2/0x400 net/socket.c:950 sock_ioctl+0x32f/0x6c0 net/socket.c:1074 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff888066641a80 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 0 bytes inside of 96-byte region [ffff888066641a80, ffff888066641ae0) The buggy address belongs to the page: page:ffffea0001999040 count:1 mapcount:0 mapping:ffff88812c3f04c0 index:0x0 flags: 0x1fffc0000000200(slab) ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de raw: 01fffc0000000200 ffffea0001817948 ffffea0002341dc8 ffff88812c3f04c0 raw: 0000000000000000 ffff888066641000 0000000100000020 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888066641980: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff888066641a00: 00 00 00 00 00 00 00 00 02 fc fc fc fc fc fc fc >ffff888066641a80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888066641b00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff888066641b80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Ralf Baechle <ralf@linux-mips.org> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1818815 commit bdcc5bc2 upstream. Since mISDN_close() uses dev->pending to iterate over active timers, there is a chance that one timer got removed from the ->pending list in dev_expire_timer() but that the thread has not called yet wake_up_interruptible() So mISDN_close() could miss this and free dev before completion of at least one dev_expire_timer() syzbot was able to catch this race : BUG: KASAN: use-after-free in register_lock_class+0x140c/0x1bf0 kernel/locking/lockdep.c:827 Write of size 8 at addr ffff88809fc18948 by task syz-executor1/24769 CPU: 1 PID: 24769 Comm: syz-executor1 Not tainted 5.0.0-rc5 #60 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_store8_noabort+0x17/0x20 mm/kasan/generic_report.c:140 register_lock_class+0x140c/0x1bf0 kernel/locking/lockdep.c:827 __lock_acquire+0x11f/0x4700 kernel/locking/lockdep.c:3224 lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3841 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152 __wake_up_common_lock+0xc7/0x190 kernel/sched/wait.c:120 __wake_up+0xe/0x10 kernel/sched/wait.c:145 dev_expire_timer+0xe4/0x3b0 drivers/isdn/mISDN/timerdev.c:174 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 protocol 88fb is buggy, dev hsr_slave_0 protocol 88fb is buggy, dev hsr_slave_1 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 </IRQ> RIP: 0010:__sanitizer_cov_trace_pc+0x26/0x50 kernel/kcov.c:101 Code: 90 90 90 90 55 48 89 e5 48 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 98 12 92 7e 81 e2 00 01 1f 00 75 2b 8b 90 d8 12 00 00 <83> fa 02 75 20 48 8b 88 e0 12 00 00 8b 80 dc 12 00 00 48 8b 11 48 RSP: 0018:ffff8880589b7a60 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffff888087ce25c0 RBX: 0000000000000001 RCX: ffffffff818f8ca3 RDX: 0000000000000000 RSI: ffffffff818f8b48 RDI: 0000000000000001 RBP: ffff8880589b7a60 R08: ffff888087ce25c0 R09: ffffed1015d25bd0 R10: ffffed1015d25bcf R11: ffff8880ae92de7b R12: ffffea0001ae4680 R13: ffffea0001ae4688 R14: 0000000000000000 R15: ffffea0001b41648 PageIdle include/linux/page-flags.h:398 [inline] page_is_idle include/linux/page_idle.h:29 [inline] mark_page_accessed+0x618/0x1140 mm/swap.c:398 touch_buffer fs/buffer.c:59 [inline] __find_get_block+0x312/0xcc0 fs/buffer.c:1298 sb_find_get_block include/linux/buffer_head.h:338 [inline] recently_deleted fs/ext4/ialloc.c:682 [inline] find_inode_bit.isra.0+0x202/0x510 fs/ext4/ialloc.c:722 __ext4_new_inode+0x14ad/0x52c0 fs/ext4/ialloc.c:914 ext4_symlink+0x3f8/0xbe0 fs/ext4/namei.c:3096 vfs_symlink fs/namei.c:4126 [inline] vfs_symlink+0x378/0x5d0 fs/namei.c:4112 do_symlinkat+0x22b/0x290 fs/namei.c:4153 __do_sys_symlink fs/namei.c:4172 [inline] __se_sys_symlink fs/namei.c:4170 [inline] __x64_sys_symlink+0x59/0x80 fs/namei.c:4170 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457b67 Code: 0f 1f 00 b8 5c 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 6d bb fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 58 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 4d bb fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff045ce0f8 EFLAGS: 00000202 ORIG_RAX: 0000000000000058 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 0000000000457b67 RDX: 00007fff045ce173 RSI: 00000000004bd63f RDI: 00007fff045ce160 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 R10: 0000000000000075 R11: 0000000000000202 R12: 0000000000000000 R13: 0000000000000001 R14: 000000000000029b R15: 0000000000000001 Allocated by task 24763: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc mm/kasan/common.c:496 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609 kmalloc include/linux/slab.h:545 [inline] mISDN_open+0x9a/0x270 drivers/isdn/mISDN/timerdev.c:59 misc_open+0x398/0x4c0 drivers/char/misc.c:141 chrdev_open+0x247/0x6b0 fs/char_dev.c:417 do_dentry_open+0x47d/0x1130 fs/open.c:771 vfs_open+0xa0/0xd0 fs/open.c:880 do_last fs/namei.c:3418 [inline] path_openat+0x10d7/0x4690 fs/namei.c:3534 do_filp_open+0x1a1/0x280 fs/namei.c:3564 do_sys_open+0x3fe/0x5d0 fs/open.c:1063 __do_sys_openat fs/open.c:1090 [inline] __se_sys_openat fs/open.c:1084 [inline] __x64_sys_openat+0x9d/0x100 fs/open.c:1084 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 24762: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:458 kasan_slab_free+0xe/0x10 mm/kasan/common.c:466 __cache_free mm/slab.c:3487 [inline] kfree+0xcf/0x230 mm/slab.c:3806 mISDN_close+0x2a1/0x390 drivers/isdn/mISDN/timerdev.c:97 __fput+0x2df/0x8d0 fs/file_table.c:278 ____fput+0x16/0x20 fs/file_table.c:309 task_work_run+0x14a/0x1c0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:166 prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline] syscall_return_slowpath arch/x86/entry/common.c:268 [inline] do_syscall_64+0x52d/0x610 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff88809fc18900 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 72 bytes inside of 192-byte region [ffff88809fc18900, ffff88809fc189c0) The buggy address belongs to the page: page:ffffea00027f0600 count:1 mapcount:0 mapping:ffff88812c3f0040 index:0xffff88809fc18000 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea000269f648 ffffea00029f7408 ffff88812c3f0040 raw: ffff88809fc18000 ffff88809fc18000 000000010000000b 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88809fc18800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88809fc18880: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88809fc18900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88809fc18980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88809fc18a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1818815 commit cf657d22 upstream. Due to quadratic behavior of x25_new_lci(), syzbot was able to trigger an rcu stall. Fix this by not blocking BH for the whole duration of the function, and inserting a reschedule point when possible. If we care enough, using a bitmap could get rid of the quadratic behavior. syzbot report : rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10500 ticks this GP) idle=4fa/1/0x4000000000000002 softirq=283376/283376 fqs=0 rcu: (t=10501 jiffies g=383105 q=136) rcu: rcu_preempt kthread starved for 10502 jiffies! g383105 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0 rcu: RCU grace-period kthread stack dump: rcu_preempt I28928 10 2 0x80000000 Call Trace: context_switch kernel/sched/core.c:2844 [inline] __schedule+0x817/0x1cc0 kernel/sched/core.c:3485 schedule+0x92/0x180 kernel/sched/core.c:3529 schedule_timeout+0x4db/0xfd0 kernel/time/timer.c:1803 rcu_gp_fqs_loop kernel/rcu/tree.c:1948 [inline] rcu_gp_kthread+0x956/0x17a0 kernel/rcu/tree.c:2105 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 NMI backtrace for cpu 0 CPU: 0 PID: 8759 Comm: syz-executor2 Not tainted 5.0.0-rc4+ #51 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 nmi_cpu_backtrace.cold+0x63/0xa4 lib/nmi_backtrace.c:101 nmi_trigger_cpumask_backtrace+0x1be/0x236 lib/nmi_backtrace.c:62 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x183/0x1cf kernel/rcu/tree.c:1211 print_cpu_stall kernel/rcu/tree.c:1348 [inline] check_cpu_stall kernel/rcu/tree.c:1422 [inline] rcu_pending kernel/rcu/tree.c:3018 [inline] rcu_check_callbacks.cold+0x500/0xa4a kernel/rcu/tree.c:2521 update_process_times+0x32/0x80 kernel/time/timer.c:1635 tick_sched_handle+0xa2/0x190 kernel/time/tick-sched.c:161 tick_sched_timer+0x47/0x130 kernel/time/tick-sched.c:1271 __run_hrtimer kernel/time/hrtimer.c:1389 [inline] __hrtimer_run_queues+0x33e/0xde0 kernel/time/hrtimer.c:1451 hrtimer_interrupt+0x314/0x770 kernel/time/hrtimer.c:1509 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1035 [inline] smp_apic_timer_interrupt+0x120/0x570 arch/x86/kernel/apic/apic.c:1060 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 </IRQ> RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline] RIP: 0010:queued_write_lock_slowpath+0x13e/0x290 kernel/locking/qrwlock.c:86 Code: 00 00 fc ff df 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 <41> 0f b6 55 00 41 38 d7 7c eb 84 d2 74 e7 48 89 df e8 6c 0f 4f 00 RSP: 0018:ffff88805f117bd8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000300 RBX: ffffffff89413ba0 RCX: 1ffffffff1282774 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89413ba0 RBP: ffff88805f117c70 R08: 1ffffffff1282774 R09: fffffbfff1282775 R10: fffffbfff1282774 R11: ffffffff89413ba3 R12: 00000000000000ff R13: fffffbfff1282774 R14: 1ffff1100be22f7d R15: 0000000000000003 queued_write_lock include/asm-generic/qrwlock.h:104 [inline] do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203 __raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline] _raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312 x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267 x25_bind+0x273/0x340 net/x25/af_x25.c:705 __sys_bind+0x23f/0x290 net/socket.c:1505 __do_sys_bind net/socket.c:1516 [inline] __se_sys_bind net/socket.c:1514 [inline] __x64_sys_bind+0x73/0xb0 net/socket.c:1514 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e39 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fafccd0dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e39 RDX: 0000000000000012 RSI: 0000000020000240 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fafccd0e6d4 R13: 00000000004bdf8b R14: 00000000004ce4b8 R15: 00000000ffffffff Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8752 Comm: syz-executor4 Not tainted 5.0.0-rc4+ #51 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__x25_find_socket+0x78/0x120 net/x25/af_x25.c:328 Code: 89 f8 48 c1 e8 03 80 3c 18 00 0f 85 a6 00 00 00 4d 8b 64 24 68 4d 85 e4 74 7f e8 03 97 3d fb 49 83 ec 68 74 74 e8 f8 96 3d fb <49> 8d bc 24 88 04 00 00 48 89 f8 48 c1 e8 03 0f b6 04 18 84 c0 74 RSP: 0018:ffff8880639efc58 EFLAGS: 00000246 RAX: 0000000000040000 RBX: dffffc0000000000 RCX: ffffc9000e677000 RDX: 0000000000040000 RSI: ffffffff863244b8 RDI: ffff88806a764628 RBP: ffff8880639efc80 R08: ffff8880a80d05c0 R09: fffffbfff1282775 R10: fffffbfff1282774 R11: ffffffff89413ba3 R12: ffff88806a7645c0 R13: 0000000000000001 R14: ffff88809f29ac00 R15: 0000000000000000 FS: 00007fe8d0c58700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32823000 CR3: 00000000672eb000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: x25_new_lci net/x25/af_x25.c:357 [inline] x25_connect+0x374/0xdf0 net/x25/af_x25.c:786 __sys_connect+0x266/0x330 net/socket.c:1686 __do_sys_connect net/socket.c:1697 [inline] __se_sys_connect net/socket.c:1694 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1694 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e39 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fe8d0c57c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e39 RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe8d0c586d4 R13: 00000000004be378 R14: 00000000004ceb00 R15: 00000000ffffffff Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1818815 commit a7b956fd upstream. The newly introduced as3722_i2c_suspend/resume functions are built unconditionally, but only used when power management is enabled, so we get a warning otherwise: drivers/mfd/as3722.c:427:12: warning: 'as3722_i2c_suspend' defined but not used [-Wunused-function] drivers/mfd/as3722.c:438:12: warning: 'as3722_i2c_resume' defined but not used [-Wunused-function] This marks them both as __maybe_unused, which avoids an ugly #ifdef and gives us best compile-time coverage. When they are unused, the compiler will silently drop the functions from its output. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 35deff7e ("mfd: as3722: Handle interrupts on suspend") Signed-off-by:
-
Jon Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1818815 commit 35deff7e upstream. The as3722 device is registered as an irqchip and the as3722-rtc interrupt is one of it's interrupt sources. When using the as3722-rtc as a wake-up device from suspend, the following is seen: PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) PM: suspend of devices complete after 161.119 msecs PM: late suspend of devices complete after 1.048 msecs PM: noirq suspend of devices complete after 0.756 msecs Disabling non-boot CPUs ... CPU1: shutdown CPU2: shutdown CPU3: shutdown Entering suspend state LP1 Enabling non-boot CPUs ... CPU1 is up CPU2 is up CPU3 is up PM: noirq resume of devices complete after 0.487 msecs as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 ... The reason why the as3722 interrupt status cannot be read is because the as3722 interrupt is not masked during suspend and when the as3722-rtc interrupt occurs, to wake-up the device, the interrupt is seen before the i2c controller has been resumed in order to read the as3722 interrupt status. The as3722-rtc driver sets it's interrupt as a wake-up source during suspend, which gets propagated to the parent as3722 interrupt. However, the as3722-rtc driver cannot disable it's interrupt during suspend otherwise we would never be woken up and so the as3722 must disable it's interrupt instead. Fix this by disabling the as3722 interrupt during suspend. To ensure that a wake-up event from the as3722 is not missing, enable the as3722 interrupt as a wake-up source before disabling the interrupt on entering suspend. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
-
chenzefeng (A) authored
BugLink: https://bugs.launchpad.net/bugs/1818815Signed-off-by:
chenzefeng <chenzefeng2@huawei.com> On x86-64, for 32-bit PC-relacive branches, we can generate PLT32 relocation, instead of PC32 relocation. and R_X86_64_PLT32 can be treated the same as R_X86_64_PC32 since linux kernel doesn't use PLT. commit b21ebf2f ("x86: Treat R_X86_64_PLT32 as R_X86_64_PC32") been fixed for the module loading, but not fixed for livepatch relocation, which will fail to load livepatch with the error message as follow: relocation failed for symbol <symbol name> at <symbol address> This issue only effacted the kernel version from 4.0 to 4.6, becauce the function klp_write_module_reloc is introduced by: commit b700e7f0 ("livepatch: kernel: add support for live patching") and deleted by: commit 425595a7 ("livepatch: reuse module loader code to write relocations") Signed-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
-
