- 14 Sep, 2024 20 commits
-
-
Dan Carpenter authored
Return an error if dma_set_mask_and_coherent() fails. Don't return success. Fixes: a36e9f5c ("rtase: Add support for a pci table in this module") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/f53ed942-5ac2-424b-a1ed-9473c599905e@stanley.mountainSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Gaosheng Cui authored
Most of the drivers which used this header have been deleted, most of these code is obsoleted, move the only defines that are actually used into arch/powerpc/platforms/chrp/pegasos_eth.c and delete the file completely. Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://patch.msgid.link/20240912011949.2726928-1-cuigaosheng1@huawei.comSigned-off-by:
-
Jakub Kicinski authored
Nelson Escobar says: ==================== enic: Report per queue stats Patch #1: Use a macro instead of static const variables for array sizes. I didn't want to add more static const variables in the next patch so clean up the existing ones first. Patch #2: Collect per queue statistics Patch #3: Report per queue stats in netdev qstats Patch #4: Report some per queue stats in ethtool # NETIF="eno6" tools/testing/selftests/drivers/net/stats.py KTAP version 1 1..5 ok 1 stats.check_pause # XFAIL pause not supported by the device ok 2 stats.check_fec # XFAIL FEC not supported by the device ok 3 stats.pkt_byte_sum ok 4 stats.qstat_by_ifindex ok 5 stats.check_down # tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ --dump qstats-get --json '{"ifindex": "34"}' [{'ifindex': 34, 'rx-bytes': 66762680, 'rx-csum-unnecessary': 1009345, 'rx-hw-drop-overruns': 0, 'rx-hw-drops': 0, 'rx-packets': 1009673, 'tx-bytes': 137936674899, 'tx-csum-none': 125, 'tx-hw-gso-packets': 2408712, 'tx-needs-csum': 2431531, 'tx-packets': 15475466, 'tx-stop': 0, 'tx-wake': 0}] v2: https://lore.kernel.org/20240905010900.24152-1-neescoba@cisco.com v1: https://lore.kernel.org/20240823235401.29996-1-neescoba@cisco.com ==================== Link: https://patch.msgid.link/20240912005039.10797-1-neescoba@cisco.comSigned-off-by: -
Nelson Escobar authored
Make 'ethtool -S <intf>' output show some per rq/wq statistics that don't exist in the netdev qstats. Signed-off-by:
Nelson Escobar <neescoba@cisco.com> Signed-off-by:
John Daley <johndale@cisco.com> Signed-off-by:
Satish Kharat <satishkh@cisco.com> Link: https://patch.msgid.link/20240912005039.10797-5-neescoba@cisco.comSigned-off-by:
-
Nelson Escobar authored
Report per queue wq/rq statistics in netdev qstats. Signed-off-by:
-
Nelson Escobar authored
Collect and per rq/wq statistics. Signed-off-by:
-
Nelson Escobar authored
In enic_ethtool.c there is no need to use static const variables to store array sizes when a macro can be used instead. Signed-off-by:
-
Jakub Kicinski authored
Ido Schimmel says: ==================== net: fib_rules: Add DSCP selector support Currently, the kernel rejects IPv4 FIB rules that try to match on the upper three DSCP bits: # ip -4 rule add tos 0x1c table 100 # ip -4 rule add tos 0x3c table 100 Error: Invalid tos. The reason for that is that historically users of the FIB lookup API only populated the lower three DSCP bits in the TOS field of the IPv4 flow key ('flowi4_tos'), which fits the TOS definition from the initial IPv4 specification (RFC 791). This is not very useful nowadays and instead some users want to be able to match on the six bits DSCP field, which replaced the TOS and IP precedence fields over 25 years ago (RFC 2474). In addition, the current behavior differs between IPv4 and IPv6 which does allow users to match on the entire DSCP field using the TOS selector. Recent patchsets made sure that callers of the FIB lookup API now populate the entire DSCP field in the IPv4 flow key. Therefore, it is now possible to extend FIB rules to match on DSCP. This is done by adding a new DSCP attribute which is implemented for both IPv4 and IPv6 to provide user space programs a consistent behavior between both address families. The behavior of the old TOS selector is unchanged and IPv4 FIB rules using it will only match on the lower three DSCP bits. The kernel will reject rules that try to use both selectors. Patch #1 adds the new DSCP attribute but rejects its usage. Patches #2-#3 implement IPv4 and IPv6 support. Patch #4 allows user space to use the new attribute. Patches #5-#6 add selftests. ==================== Link: https://patch.msgid.link/20240911093748.3662015-1-idosch@nvidia.comSigned-off-by: -
Ido Schimmel authored
Test that locally generated traffic from a socket that specifies a DS Field using the IP_TOS / IPV6_TCLASS socket options is correctly redirected using a FIB rule that matches on DSCP. Add negative tests to verify that the rule is not it when it should not. Test with both IPv4 and IPv6 and with both TCP and UDP sockets. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Guillaume Nault <gnault@redhat.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20240911093748.3662015-7-idosch@nvidia.comSigned-off-by:
-
Ido Schimmel authored
Add tests for the new FIB rule DSCP selector. Test with both IPv4 and IPv6 and with both input and output routes. Signed-off-by:
-
Ido Schimmel authored
Now that both IPv4 and IPv6 support the new DSCP selector, enable user space to configure FIB rules that make use of it by changing the policy of the new DSCP attribute so that it accepts values in the range of [0, 63]. Use NLA_U8 rather than NLA_UINT as the field is of fixed size. Signed-off-by:
-
Ido Schimmel authored
Implement support for the new DSCP selector that allows IPv6 FIB rules to match on the entire DSCP field. This is done despite the fact that the above can be achieved using the existing TOS selector, so that user space program will be able to work with IPv4 and IPv6 rules in the same way. Differentiate between both selectors by adding a new bit in the IPv6 FIB rule structure that is only set when the 'FRA_DSCP' attribute is specified by user space. Reject rules that use both selectors. Signed-off-by:
-
Ido Schimmel authored
Implement support for the new DSCP selector that allows IPv4 FIB rules to match on the entire DSCP field, unlike the existing TOS selector that only matches on the three lower DSCP bits. Differentiate between both selectors by adding a new bit in the IPv4 FIB rule structure (in an existing one byte hole) that is only set when the 'FRA_DSCP' attribute is specified by user space. Reject rules that use both selectors. Signed-off-by:
-
Ido Schimmel authored
The FIB rule TOS selector is implemented differently between IPv4 and IPv6. In IPv4 it is used to match on the three "Type of Services" bits specified in RFC 791, while in IPv6 is it is used to match on the six DSCP bits specified in RFC 2474. Add a new FIB rule attribute to allow matching on DSCP. The attribute will be used to implement a 'dscp' selector in ip-rule with a consistent behavior between IPv4 and IPv6. For now, set the type of the attribute to 'NLA_REJECT' so that user space will not be able to configure it. This restriction will be lifted once both IPv4 and IPv6 support the new attribute. Signed-off-by:
-
Danielle Ratson authored
During the firmware flashing process, notifications are sent to user space to provide progress updates. When an error occurs, an error message is sent to indicate what went wrong. In some cases, appropriate error messages are missing. Add relevant error messages where applicable, allowing user space to better understand the issues encountered. Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
-
Andy Shevchenko authored
The PCI vendor ID for Cadence is defined in pci_ids.h. Use it. While at it, move to PCI_VDEVICE() macro and usual pattern for PCI device ID. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240913125146.3628751-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Martyn Welch authored
The enetc driver uses ifdefs when checking whether CONFIG_FSL_ENETC_PTP_CLOCK is enabled in a number of places. This works if the driver is built-in but fails if the driver is available as a kernel module. Replace the instances of ifdef with use of the IS_ENABLED macro, that will evaluate as true when this feature is built as a kernel module and follows the kernel's coding style. Reviewed-by:
Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by:
Martyn Welch <martyn.welch@collabora.com> Reviewed-by:
-
Kory Maincent authored
Fix a missing end of phrase in the documentation. It describes the ETHTOOL_A_C33_PSE_ACTUAL_PW attribute, which was not fully explained. Also, fix grammar issues by using simple present tense instead of present continuous. Reviewed-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
Kory Maincent <kory.maincent@bootlin.com> Reviewed-by:
-
Qianqiang Liu authored
The "err" is always zero, so the following branch can never be executed: if (err) { ndev->stats.rx_dropped++; kfree_skb(skb); } Therefore, the "if" statement can be removed. Use "ndev->stats.rx_errors" to count "napi_build_skb()" failure Reviewed-by:Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Qianqiang Liu <qianqiang.liu@163.com> Link: https://patch.msgid.link/20240913014731.149739-1-qianqiang.liu@163.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604 - btusb: Add Realtek RTL8852C support ID 0x0489:0xe122 - btrtl: Add the support for RTL8922A - btusb: Add 2 USB HW IDs for MT7925 (0xe118/e) - btnxpuart: Add support for ISO packets - btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608 - btsdio: Do not bind to non-removable CYW4373 - hci_uart: Add support for Amlogic HCI UART * tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (27 commits) Bluetooth: btintel_pcie: Allocate memory for driver private data Bluetooth: btusb: Fix not handling ZPL/short-transfer Bluetooth: btusb: Add 2 USB HW IDs for MT7925 (0xe118/e) Bluetooth: btsdio: Do not bind to non-removable CYW4373 Bluetooth: hci_sync: Ignore errors from HCI_OP_REMOTE_NAME_REQ_CANCEL Bluetooth: CMTP: Mark BT_CMTP as DEPRECATED Bluetooth: replace deprecated strncpy with strscpy_pad Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852B Bluetooth: Use led_set_brightness() in LED trigger activate() callback Bluetooth: btrtl: Use kvmemdup to simplify the code Bluetooth: btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608 Bluetooth: btrtl: Add the support for RTL8922A Bluetooth: hci_ldisc: Use speed set by btattach as oper_speed Bluetooth: hci_conn: Remove redundant memset after kzalloc Bluetooth: L2CAP: Remove unused declarations dt-bindings: bluetooth: bring the HW description closer to reality for wcn6855 Bluetooth: btnxpuart: Add support for ISO packets Bluetooth: hci_h4: Add support for ISO packets in h4_recv.h Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122 ... ==================== Link: https://patch.msgid.link/20240912214317.3054060-1-luiz.dentz@gmail.comSigned-off-by:
-
- 13 Sep, 2024 20 commits
-
-
Mina Almasry authored
When CONFIG_TRACEPOINTS=y but CONFIG_PAGE_POOL=n, we end up with this build failure that is reported by the 0-day bot: ld: vmlinux.o: in function `mp_dmabuf_devmem_alloc_netmems': >> (.text+0xc37286): undefined reference to `__tracepoint_page_pool_state_hold' >> ld: (.text+0xc3729a): undefined reference to `__SCT__tp_func_page_pool_state_hold' >> ld: vmlinux.o:(__jump_table+0x10c48): undefined reference to `__tracepoint_page_pool_state_hold' >> ld: vmlinux.o:(.static_call_sites+0xb824): undefined reference to `__SCK__tp_func_page_pool_state_hold' The root cause is that in this configuration, traces are enabled but the page_pool specific trace_page_pool_state_hold is not registered. There is no reason to build the dmabuf memory provider when CONFIG_PAGE_POOL is not present, as it's really a provider to the page_pool. In fact the whole NET_DEVMEM is RX path-only at the moment, so we can make the entire config dependent on the PAGE_POOL. Note that this may need to be revisited after/while devmem TX is added, as devmem TX likely does not need CONFIG_PAGE_POOL. For now this build fix is sufficient. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202409131239.ysHQh4Tv-lkp@intel.com/Signed-off-by:
Mina Almasry <almasrymina@google.com> Reviewed-by:
-
David S. Miller authored
Roger Quadros says: ==================== net: ethernet: ti: am65-cpsw: Add multi queue RX support am65-cpsw can support up to 8 queues at Rx. So far we have been using only one queue (i.e. default flow) for all RX traffic. This series adds multi-queue support. The driver starts with 1 RX queue by default. User can increase the RX queues via ethtool, e.g. 'ethtool -L ethx rx <N>' The series also adds regmap and regfield support to some of the ALE registers. It adds Policer/Classifier registers and fields. Converting the existing ALE control APIs to regfields can be a separate exercise. Some helper functions are added to read/write to the Policer/Classifier registers and a default Classifier setup function is added that routes packets based on their PCP/DSCP priority to different RX queues. Signed-off-by:
Roger Quadros <rogerq@kernel.org> --- Changes in v4: - Use single macro AM65_CPSW_MAX_QUEUES for both TX and RX queues to simplify code - reuse am65_cpsw_get/set_per_queue_coalesce for am65_cpsw_get/set_coalesce. - return -EINVAL if unsupported tx/rx_coalesce_usecs in am65_cpsw_set_coalesce. - reverse Xmas tree declaration order fixes in cpsw_ale - Link to v3: https://lore.kernel.org/r/20240703-am65-cpsw-multi-rx-v3-0-f11cd860fd72@kernel.org Changes in v3: - code style fixes - squashed patches 5 and 6 - added comment about priority to thread mapping table. - Added Reviewed-by Simon Horman. - Link to v2: https://lore.kernel.org/r/20240628-am65-cpsw-multi-rx-v2-0-c399cb77db56@kernel.org Changes in v2: - rebase to net/next - fixed RX stall issue during iperf - Link to v1: https://lore.kernel.org/r/20240606-am65-cpsw-multi-rx-v1-0-0704b0cb6fdc@kernel.org ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roger Quadros authored
Now that we support multiple RX queues, enable default priority to flow mapping so that higher priority packets come on higher channels (flows). The Classifier checks for PCP/DSCP priority in the packet and routes them to the appropriate flow. Signed-off-by:
-
Roger Quadros authored
The Policer registers in the ALE register space are just shadow registers and use an index field in the policer table control register to read/write to the actual Polier registers. Add helper functions to Read and Write to Policer registers. Also add a helper function to set the thread value to classifier/policer mapping. Any packet that first matches the classifier will be sent to the thread (flow) that is set in the classifier to thread mapping table. If not set then it goes to the default flow. Default behaviour is to have 8 classifiers to map 8 DSCP/PCP priorities to N receive threads (flows). N depends on number of RX channels enabled for the port. As per the standard [1] User prioritie 1 (Background) and 2 (Spare) have lower priority than the user priority 0 (default). User priority 1 being of the lowest priority. [1] IEEE802.1D-2004, IEEE Standard for Local and metropolitan area networks Table G-2 - Traffic type acronyms Table G-3 - Defining traffic types Signed-off-by:
-
Roger Quadros authored
Adds regfileds for Policer registers and Thread mapping/control registers. Signed-off-by:
-
Roger Quadros authored
Use regfields for number of ALE Entries and Policers. The variants that support Policers/Classifiers have the number of policers encoded in the ALE_STATUS register. Use that and show the number of Policers in the ALE info message. Signed-off-by:
-
Roger Quadros authored
Map the entire ALE registerspace using regmap. Add regfields for Major and Minor Version fields. Signed-off-by:
-
Roger Quadros authored
am65-cpsw can support up to 8 queues at Rx. Use a macro AM65_CPSW_MAX_RX_QUEUES to indicate that. As there is only one DMA channel for RX traffic, the 8 queues come as 8 flows in that channel. By default, we will start with 1 flow as defined by the macro AM65_CPSW_DEFAULT_RX_CHN_FLOWS. User can change the number of flows by ethtool like so 'ethtool -L ethx rx <N>' All traffic will still come on flow 0. To get traffic on different flows the Classifiers will need to be set up. Signed-off-by:
-
Mina Almasry authored
When CONFIG_SYSFS is not set, the kernel fails to compile: net/core/page_pool_user.c:368:45: error: implicit declaration of function 'get_netdev_rx_queue_index' [-Werror=implicit-function-declaration] 368 | if (pool->slow.queue_idx == get_netdev_rx_queue_index(rxq)) { | ^~~~~~~~~~~~~~~~~~~~~~~~~ When CONFIG_SYSFS is not set, get_netdev_rx_queue_index() is not defined as well. Fix by removing the ifdef around get_netdev_rx_queue_index(). It is not needed anymore after commit e817f856 ("xdp: generic XDP handling of xdp_rxq_info") removed most of the CONFIG_SYSFS ifdefs. Fixes: 0f921404 ("memory-provider: dmabuf devmem memory provider") Cc: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: -
Jakub Kicinski authored
Saeed Mahameed says: ==================== Misc updates to mlx5 driver: 1) Fix HW steering ret value and align with kdoc 2) Flow steering cleanups and add support for no append at software level 3) Support for sync reset using hot reset 4) RX SW counter to cover no-split events in header/data split mode 5) Make affinity of SFs configurable ==================== Link: https://patch.msgid.link/20240911201757.1505453-1-saeed@kernel.orgSigned-off-by:
-
Rahul Rameshbabu authored
mlx5e_free_rq previously cleaned resources in an order that was not the reverse of the resource allocation order in mlx5e_alloc_rq. Signed-off-by:
Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20240911201757.1505453-16-saeed@kernel.orgSigned-off-by:
-
Dragos Tatulea authored
When SHAMPO can't identify the protocol/header of a packet, it will yield a packet that is not split - all the packet is in the data part. Count this value in packets and bytes. Signed-off-by:
Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by:
-
Shay Drory authored
Add a new command status MLX5_CMD_STAT_NOT_READY to handle cases where the firmware is not ready. Signed-off-by:
Shay Drory <shayd@nvidia.com> Signed-off-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20240911201757.1505453-14-saeed@kernel.orgSigned-off-by:
-
Shay Drory authored
SFs didn't allow to configure IRQ affinity for its vectors. Allow users to configure the affinity of the SFs irqs. Signed-off-by:
-
Moshe Shemesh authored
Sync reset request is nacked by the driver when PCIe bridge connected to mlx5 device has HotPlug interrupt enabled. However, when using reset method of hot reset this check can be skipped as Hotplug is supported on this reset method. Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
-
Moshe Shemesh authored
On device that supports sync reset for firmware activate using hot reset, the driver queries the required reset method while handling the sync reset request. If the required reset method is hot reset, the driver will use pci_reset_bus() to reset the PCI link instead of the link toggle. Signed-off-by:
-
Moshe Shemesh authored
New devices with new FW can support sync reset for firmware activate using hot reset. Add capability for supporting it and add MFRL field to query from FW which type of PCI reset method to use while handling sync reset events. Signed-off-by:
-
Mark Bloch authored
Native capability for some steering engines lacks support for adding an additional match with the same value to the same flow group. To accommodate the NO APPEND flag in these scenarios, we include the new rule in the existing flow table entry (fte) without immediate hardware commitment. When a request is made to delete the corresponding hardware rule, we then commit the pending rule to hardware. Only one pending rule is supported because NO_APPEND is primarily used during replacement operations. In this scenario, a rule is initially added. When it needs replacement, the new rule is added with NO_APPEND set. Only after the insertion of the new rule is the original rule deleted. Signed-off-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
-
Mark Bloch authored
Introduce a dedicated structure to encapsulate flow context, actions, destination count, and modification mask. This refactoring lays the groundwork for forthcoming patches that will integrate the NO APPEND software logic. Future modifications should focus solely on these specific fields. Signed-off-by:
-
Mark Bloch authored
Counter is in struct fte, remove it. Signed-off-by:
-
