- 17 Jun, 2019 1 commit
-
-
Filipe Manana authored
After the recent series of cleanups in the properties and xattrs modules that landed in the 5.2 merge window, we ended up with a regression where after deleting the compression xattr property through the setflags ioctl, we don't set the BTRFS_INODE_COPY_EVERYTHING flag in the inode anymore. As a consequence, if the inode was fsync'ed when it had the compression property set, after deleting the compression property through the setflags ioctl and fsync'ing again the inode, the log will still contain the compression xattr, because the inode did not had that bit set, which made the fsync not delete all xattrs from the log and copy all xattrs from the subvolume tree to the log tree. This regression happens due to the fact that that series of cleanups made btrfs_set_prop() call the old function do_setxattr() (which is now named btrfs_setxattr()), and not the old version of btrfs_setxattr(), which is now called btrfs_setxattr_trans(). Fix this by setting the BTRFS_INODE_COPY_EVERYTHING bit in the current btrfs_setxattr() function and remove it from everywhere else, including its setup at btrfs_ioctl_setflags(). This is cleaner, avoids similar regressions in the future, and centralizes the setup of the bit. After all, the need to setup this bit should only be in the xattrs module, since it is an implementation of xattrs. Fixes: 04e6863b ("btrfs: split btrfs_setxattr calls regarding transaction") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
- 14 Jun, 2019 1 commit
-
-
Naohiro Aota authored
Currently, btrfs does not consult seed devices to start readahead. As a result, if readahead zone is added to the seed devices, btrfs_reada_wait() indefinitely wait for the reada_ctl to finish. You can reproduce the hung by modifying btrfs/163 to have larger initial file size (e.g. xfs_io pwrite 4M instead of current 256K). Fixes: 7414a03f ("btrfs: initial readahead code and prototypes") Cc: stable@vger.kernel.org # 3.2+: ce7791ff: Btrfs: fix race between readahead and device replace/removal Cc: stable@vger.kernel.org # 3.2+ Reviewed-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
-
- 12 Jun, 2019 1 commit
-
-
Filipe Manana authored
If a task is removing the block group that currently has the highest start offset amongst all existing block groups, there is a short time window where it races with a concurrent block group allocation, resulting in a transaction abort with an error code of EEXIST. The following diagram explains the race in detail: Task A Task B btrfs_remove_block_group(bg offset X) remove_extent_mapping(em offset X) -> removes extent map X from the tree of extent maps (fs_info->mapping_tree), so the next call to find_next_chunk() will return offset X btrfs_alloc_chunk() find_next_chunk() --> returns offset X __btrfs_alloc_chunk(offset X) btrfs_make_block_group() btrfs_create_block_group_cache() --> creates btrfs_block_group_cache object with a key corresponding to the block group item in the extent, the key is: (offset X, BTRFS_BLOCK_GROUP_ITEM_KEY, 1G) --> adds the btrfs_block_group_cache object to the list new_bgs of the transaction handle btrfs_end_transaction(trans handle) __btrfs_end_transaction() btrfs_create_pending_block_groups() --> sees the new btrfs_block_group_cache in the new_bgs list of the transaction handle --> its call to btrfs_insert_item() fails with -EEXIST when attempting to insert the block group item key (offset X, BTRFS_BLOCK_GROUP_ITEM_KEY, 1G) because task A has not removed that key yet --> aborts the running transaction with error -EEXIST btrfs_del_item() -> removes the block group's key from the extent tree, key is (offset X, BTRFS_BLOCK_GROUP_ITEM_KEY, 1G) A sample transaction abort trace: [78912.403537] ------------[ cut here ]------------ [78912.403811] BTRFS: Transaction aborted (error -17) [78912.404082] WARNING: CPU: 2 PID: 20465 at fs/btrfs/extent-tree.c:10551 btrfs_create_pending_block_groups+0x196/0x250 [btrfs] (...) [78912.405642] CPU: 2 PID: 20465 Comm: btrfs Tainted: G W 5.0.0-btrfs-next-46 #1 [78912.405941] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [78912.406586] RIP: 0010:btrfs_create_pending_block_groups+0x196/0x250 [btrfs] (...) [78912.407636] RSP: 0018:ffff9d3d4b7e3b08 EFLAGS: 00010282 [78912.407997] RAX: 0000000000000000 RBX: ffff90959a3796f0 RCX: 0000000000000006 [78912.408369] RDX: 0000000000000007 RSI: 0000000000000001 RDI: ffff909636b16860 [78912.408746] RBP: ffff909626758a58 R08: 0000000000000000 R09: 0000000000000000 [78912.409144] R10: ffff9095ff462400 R11: 0000000000000000 R12: ffff90959a379588 [78912.409521] R13: ffff909626758ab0 R14: ffff9095036c0000 R15: ffff9095299e1158 [78912.409899] FS: 00007f387f16f700(0000) GS:ffff909636b00000(0000) knlGS:0000000000000000 [78912.410285] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [78912.410673] CR2: 00007f429fc87cbc CR3: 000000014440a004 CR4: 00000000003606e0 [78912.411095] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [78912.411496] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [78912.411898] Call Trace: [78912.412318] __btrfs_end_transaction+0x5b/0x1c0 [btrfs] [78912.412746] btrfs_inc_block_group_ro+0xcf/0x160 [btrfs] [78912.413179] scrub_enumerate_chunks+0x188/0x5b0 [btrfs] [78912.413622] ? __mutex_unlock_slowpath+0x100/0x2a0 [78912.414078] btrfs_scrub_dev+0x2ef/0x720 [btrfs] [78912.414535] ? __sb_start_write+0xd4/0x1c0 [78912.414963] ? mnt_want_write_file+0x24/0x50 [78912.415403] btrfs_ioctl+0x17fb/0x3120 [btrfs] [78912.415832] ? lock_acquire+0xa6/0x190 [78912.416256] ? do_vfs_ioctl+0xa2/0x6f0 [78912.416685] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [78912.417116] do_vfs_ioctl+0xa2/0x6f0 [78912.417534] ? __fget+0x113/0x200 [78912.417954] ksys_ioctl+0x70/0x80 [78912.418369] __x64_sys_ioctl+0x16/0x20 [78912.418812] do_syscall_64+0x60/0x1b0 [78912.419231] entry_SYSCALL_64_after_hwframe+0x49/0xbe [78912.419644] RIP: 0033:0x7f3880252dd7 (...) [78912.420957] RSP: 002b:00007f387f16ed68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [78912.421426] RAX: ffffffffffffffda RBX: 000055f5becc1df0 RCX: 00007f3880252dd7 [78912.421889] RDX: 000055f5becc1df0 RSI: 00000000c400941b RDI: 0000000000000003 [78912.422354] RBP: 0000000000000000 R08: 00007f387f16f700 R09: 0000000000000000 [78912.422790] R10: 00007f387f16f700 R11: 0000000000000246 R12: 0000000000000000 [78912.423202] R13: 00007ffda49c266f R14: 0000000000000000 R15: 00007f388145e040 [78912.425505] ---[ end trace eb9bfe7c426fc4d3 ]--- Fix this by calling remove_extent_mapping(), at btrfs_remove_block_group(), only at the very end, after removing the block group item key from the extent tree (and removing the free space tree entry if we are using the free space tree feature). Fixes: 04216820 ("Btrfs: fix race between fs trimming and block group remove/allocation") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
- 07 Jun, 2019 1 commit
-
-
Nikolay Borisov authored
This patch removes support for range parameters of FITRIM ioctl when trimming unallocated space on devices. This is necessary since ranges passed from user space are generally interpreted as logical addresses, whereas btrfs_trim_free_extents used to interpret them as device physical extents. This could result in counter-intuitive behavior for users so it's best to remove that support altogether. Additionally, the existing range support had a bug where if an offset was passed to FITRIM which overflows u64 e.g. -1 (parsed as u64 18446744073709551615) then wrong data was fed into btrfs_issue_discard, which in turn leads to wrap-around when aligning the passed range and results in wrong regions being discarded which leads to data corruption. Fixes: c2d1b3aa ("btrfs: Honour FITRIM range constraints during free space trim") Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
- 28 May, 2019 9 commits
-
-
Filipe Manana authored
When syncing the log, the final phase of a fsync operation, we need to either create a log root's item or update the existing item in the log tree of log roots, and that depends on the current value of the log root's log_transid - if it's 1 we need to create the log root item, otherwise it must exist already and we update it. Since there is no synchronization between updating the log_transid and checking it for deciding whether the log root's item needs to be created or updated, we end up with a tiny race window that results in attempts to update the item to fail because the item was not yet created: CPU 1 CPU 2 btrfs_sync_log() lock root->log_mutex set log root's log_transid to 1 unlock root->log_mutex btrfs_sync_log() lock root->log_mutex sets log root's log_transid to 2 unlock root->log_mutex update_log_root() sees log root's log_transid with a value of 2 calls btrfs_update_root(), which fails with -EUCLEAN and causes transaction abort Until recently the race lead to a BUG_ON at btrfs_update_root(), but after the recent commit 7ac1e464 ("btrfs: Don't panic when we can't find a root key") we just abort the current transaction. A sample trace of the BUG_ON() on a SLE12 kernel: ------------[ cut here ]------------ kernel BUG at ../fs/btrfs/root-tree.c:157! Oops: Exception in kernel mode, sig: 5 [#1] SMP NR_CPUS=2048 NUMA pSeries (...) Supported: Yes, External CPU: 78 PID: 76303 Comm: rtas_errd Tainted: G X 4.4.156-94.57-default #1 task: c00000ffa906d010 ti: c00000ff42b08000 task.ti: c00000ff42b08000 NIP: d000000036ae5cdc LR: d000000036ae5cd8 CTR: 0000000000000000 REGS: c00000ff42b0b860 TRAP: 0700 Tainted: G X (4.4.156-94.57-default) MSR: 8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 22444484 XER: 20000000 CFAR: d000000036aba66c SOFTE: 1 GPR00: d000000036ae5cd8 c00000ff42b0bae0 d000000036bda220 0000000000000054 GPR04: 0000000000000001 0000000000000000 c00007ffff8d37c8 0000000000000000 GPR08: c000000000e19c00 0000000000000000 0000000000000000 3736343438312079 GPR12: 3930373337303434 c000000007a3a800 00000000007fffff 0000000000000023 GPR16: c00000ffa9d26028 c00000ffa9d261f8 0000000000000010 c00000ffa9d2ab28 GPR20: c00000ff42b0bc48 0000000000000001 c00000ff9f0d9888 0000000000000001 GPR24: c00000ffa9d26000 c00000ffa9d261e8 c00000ffa9d2a800 c00000ff9f0d9888 GPR28: c00000ffa9d26028 c00000ffa9d2aa98 0000000000000001 c00000ffa98f5b20 NIP [d000000036ae5cdc] btrfs_update_root+0x25c/0x4e0 [btrfs] LR [d000000036ae5cd8] btrfs_update_root+0x258/0x4e0 [btrfs] Call Trace: [c00000ff42b0bae0] [d000000036ae5cd8] btrfs_update_root+0x258/0x4e0 [btrfs] (unreliable) [c00000ff42b0bba0] [d000000036b53610] btrfs_sync_log+0x2d0/0xc60 [btrfs] [c00000ff42b0bce0] [d000000036b1785c] btrfs_sync_file+0x44c/0x4e0 [btrfs] [c00000ff42b0bd80] [c00000000032e300] vfs_fsync_range+0x70/0x120 [c00000ff42b0bdd0] [c00000000032e44c] do_fsync+0x5c/0xb0 [c00000ff42b0be10] [c00000000032e8dc] SyS_fdatasync+0x2c/0x40 [c00000ff42b0be30] [c000000000009488] system_call+0x3c/0x100 Instruction dump: 7f43d378 4bffebb9 60000000 88d90008 3d220000 e8b90000 3b390009 e87a01f0 e8898e08 e8f90000 4bfd48e5 60000000 <0fe00000> e95b0060 39200004 394a0ea0 ---[ end trace 8f2dc8f919cabab8 ]--- So fix this by doing the check of log_transid and updating or creating the log root's item while holding the root's log_mutex. Fixes: 7237f183 ("Btrfs: fix tree logs parallel sync") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: -
Filipe Manana authored
When replaying a log that contains a new file or directory name that needs to be added to its parent directory, we end up updating the mtime and the ctime of the parent directory to the current time after we have set their values to the correct ones (set at fsync time), efectivelly losing them. Sample reproducer: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/dir $ touch /mnt/dir/file # fsync of the directory is optional, not needed $ xfs_io -c fsync /mnt/dir $ xfs_io -c fsync /mnt/dir/file $ stat -c %Y /mnt/dir 1557856079 <power failure> $ sleep 3 $ mount /dev/sdb /mnt $ stat -c %Y /mnt/dir 1557856082 --> should have been 1557856079, the mtime is updated to the current time when replaying the log Fix this by not updating the mtime and ctime to the current time at btrfs_add_link() when we are replaying a log tree. This could be triggered by my recent fsync fuzz tester for fstests, for which an fstests patch exists titled "fstests: generic, fsync fuzz tester with fsstress". Fixes: e02119d5 ("Btrfs: Add a write ahead tree log to optimize synchronous operations") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: -
Filipe Manana authored
While logging an inode we follow its ancestors and for each one we mark it as logged in the current transaction, even if we have not logged it. As a consequence if we change an attribute of an ancestor, such as the UID or GID for example, and then explicitly fsync it, we end up not logging the inode at all despite returning success to user space, which results in the attribute being lost if a power failure happens after the fsync. Sample reproducer: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/dir $ chown 6007:6007 /mnt/dir $ sync $ chown 9003:9003 /mnt/dir $ touch /mnt/dir/file $ xfs_io -c fsync /mnt/dir/file # fsync our directory after fsync'ing the new file, should persist the # new values for the uid and gid. $ xfs_io -c fsync /mnt/dir <power failure> $ mount /dev/sdb /mnt $ stat -c %u:%g /mnt/dir 6007:6007 --> should be 9003:9003, the uid and gid were not persisted, despite the explicit fsync on the directory prior to the power failure Fix this by not updating the logged_trans field of ancestor inodes when logging an inode, since we have not logged them. Let only future calls to btrfs_log_inode() to mark inodes as logged. This could be triggered by my recent fsync fuzz tester for fstests, for which an fstests patch exists titled "fstests: generic, fsync fuzz tester with fsstress". Fixes: 12fcfd22 ("Btrfs: tree logging unlink/rename fixes") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: -
Qu Wenruo authored
[BUG] When mounting a fs with reloc tree and has qgroup enabled, it can cause NULL pointer dereference at mount time: BUG: kernel NULL pointer dereference, address: 00000000000000a8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:btrfs_qgroup_add_swapped_blocks+0x186/0x300 [btrfs] Call Trace: replace_path.isra.23+0x685/0x900 [btrfs] merge_reloc_root+0x26e/0x5f0 [btrfs] merge_reloc_roots+0x10a/0x1a0 [btrfs] btrfs_recover_relocation+0x3cd/0x420 [btrfs] open_ctree+0x1bc8/0x1ed0 [btrfs] btrfs_mount_root+0x544/0x680 [btrfs] legacy_get_tree+0x34/0x60 vfs_get_tree+0x2d/0xf0 fc_mount+0x12/0x40 vfs_kern_mount.part.12+0x61/0xa0 vfs_kern_mount+0x13/0x20 btrfs_mount+0x16f/0x860 [btrfs] legacy_get_tree+0x34/0x60 vfs_get_tree+0x2d/0xf0 do_mount+0x81f/0xac0 ksys_mount+0xbf/0xe0 __x64_sys_mount+0x25/0x30 do_syscall_64+0x65/0x240 entry_SYSCALL_64_after_hwframe+0x49/0xbe [CAUSE] In btrfs_recover_relocation(), we don't have enough info to determine which block group we're relocating, but only to merge existing reloc trees. Thus in btrfs_recover_relocation(), rc->block_group is NULL. btrfs_qgroup_add_swapped_blocks() hasn't taken this into consideration, and causes a NULL pointer dereference. The bug is introduced by commit 3d0174f7 ("btrfs: qgroup: Only trace data extents in leaves if we're relocating data block group"), and later qgroup refactoring still keeps this optimization. [FIX] Thankfully in the context of btrfs_recover_relocation(), there is no other progress can modify tree blocks, thus those swapped tree blocks pair will never affect qgroup numbers, no matter whatever we set for block->trace_leaf. So we only need to check if @bg is NULL before accessing @bg->flags. Reported-by:
Juan Erbes <jerbes@gmail.com> Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1134806 Fixes: 3d0174f7 ("btrfs: qgroup: Only trace data extents in leaves if we're relocating data block group") CC: stable@vger.kernel.org # 4.20+ Signed-off-by:
-
Qu Wenruo authored
[BUG] When a fs has orphan reloc tree along with unfinished balance: ... item 16 key (TREE_RELOC ROOT_ITEM FS_TREE) itemoff 12090 itemsize 439 generation 12 root_dirid 256 bytenr 300400640 level 1 refs 0 <<< lastsnap 8 byte_limit 0 bytes_used 1359872 flags 0x0(none) uuid 7c48d938-33a3-4aae-ab19-6e5c9d406e46 item 17 key (BALANCE TEMPORARY_ITEM 0) itemoff 11642 itemsize 448 temporary item objectid BALANCE offset 0 balance status flags 14 Then at mount time, we can hit the following kernel BUG_ON(): BTRFS info (device dm-3): relocating block group 298844160 flags metadata|dup ------------[ cut here ]------------ kernel BUG at fs/btrfs/relocation.c:1413! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 897 Comm: btrfs-balance Tainted: G O 5.2.0-rc1-custom #15 RIP: 0010:create_reloc_root+0x1eb/0x200 [btrfs] Call Trace: btrfs_init_reloc_root+0x96/0xb0 [btrfs] record_root_in_trans+0xb2/0xe0 [btrfs] btrfs_record_root_in_trans+0x55/0x70 [btrfs] select_reloc_root+0x7e/0x230 [btrfs] do_relocation+0xc4/0x620 [btrfs] relocate_tree_blocks+0x592/0x6a0 [btrfs] relocate_block_group+0x47b/0x5d0 [btrfs] btrfs_relocate_block_group+0x183/0x2f0 [btrfs] btrfs_relocate_chunk+0x4e/0xe0 [btrfs] btrfs_balance+0x864/0xfa0 [btrfs] balance_kthread+0x3b/0x50 [btrfs] kthread+0x123/0x140 ret_from_fork+0x27/0x50 [CAUSE] In btrfs, reloc trees are used to record swapped tree blocks during balance. Reloc tree either get merged (replace old tree blocks of its parent subvolume) in next transaction if its ref is 1 (fresh). Or is already merged and will be cleaned up if its ref is 0 (orphan). After commit d2311e69 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots"), reloc tree cleanup is delayed until one block group is balanced. Since fresh reloc roots are recorded during merge, as long as there is no power loss, those orphan reloc roots converted from fresh ones are handled without problem. However when power loss happens, orphan reloc roots can be recorded on-disk, thus at next mount time, we will have orphan reloc roots from on-disk data directly, and ignored by clean_dirty_subvols() routine. Then when background balance starts to balance another block group, and needs to create new reloc root for the same root, btrfs_insert_item() returns -EEXIST, and trigger that BUG_ON(). [FIX] For orphan reloc roots, also queue them to rc->dirty_subvol_roots, so all reloc roots no matter orphan or not, can be cleaned up properly and avoid above BUG_ON(). And to cooperate with above change, clean_dirty_subvols() will check if the queued root is a reloc root or a subvol root. For a subvol root, do the old work, and for a orphan reloc root, clean it up. Fixes: d2311e69 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots") CC: stable@vger.kernel.org # 5.1 Signed-off-by: -
Filipe Manana authored
When doing an incremental send we can now issue clone operations with a source range that ends at the source's file eof and with a destination range that ends at an offset smaller then the destination's file eof. If the eof of the source file is not aligned to the sector size of the filesystem, the receiver will get a -EINVAL error when trying to do the operation or, on older kernels, silently corrupt the destination file. The corruption happens on kernels without commit ac765f83 ("Btrfs: fix data corruption due to cloning of eof block"), while the failure to clone happens on kernels with that commit. Example reproducer: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt/sdb $ xfs_io -f -c "pwrite -S 0xb1 0 2M" /mnt/sdb/foo $ xfs_io -f -c "pwrite -S 0xc7 0 2M" /mnt/sdb/bar $ xfs_io -f -c "pwrite -S 0x4d 0 2M" /mnt/sdb/baz $ xfs_io -f -c "pwrite -S 0xe2 0 2M" /mnt/sdb/zoo $ btrfs subvolume snapshot -r /mnt/sdb /mnt/sdb/base $ btrfs send -f /tmp/base.send /mnt/sdb/base $ xfs_io -c "reflink /mnt/sdb/bar 1560K 500K 100K" /mnt/sdb/bar $ xfs_io -c "reflink /mnt/sdb/bar 1560K 0 100K" /mnt/sdb/zoo $ xfs_io -c "truncate 550K" /mnt/sdb/bar $ btrfs subvolume snapshot -r /mnt/sdb /mnt/sdb/incr $ btrfs send -f /tmp/incr.send -p /mnt/sdb/base /mnt/sdb/incr $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt/sdc $ btrfs receive -f /tmp/base.send /mnt/sdc $ btrfs receive -vv -f /tmp/incr.send /mnt/sdc (...) truncate bar size=563200 utimes bar clone zoo - source=bar source offset=512000 offset=0 length=51200 ERROR: failed to clone extents to zoo Invalid argument The failure happens because the clone source range ends at the eof of file bar, 563200, which is not aligned to the filesystems sector size (4Kb in this case), and the destination range ends at offset 0 + 51200, which is less then the size of the file zoo (2Mb). So fix this by detecting such case and instead of issuing a clone operation for the whole range, do a clone operation for smaller range that is sector size aligned followed by a write operation for the block containing the eof. Here we will always be pessimistic and assume the destination filesystem of the send stream has the largest possible sector size (64Kb), since we have no way of determining it. This fixes a recent regression introduced in kernel 5.2-rc1. Fixes: 040ee612 ("Btrfs: send, improve clone range") Signed-off-by:
-
Filipe Manana authored
When using the no-holes feature, if we have a file with prealloc extents with a start offset beyond the file's eof, doing an incremental send can cause corruption of the file due to incorrect hole detection. Such case requires that the prealloc extent(s) exist in both the parent and send snapshots, and that a hole is punched into the file that covers all its extents that do not cross the eof boundary. Example reproducer: $ mkfs.btrfs -f -O no-holes /dev/sdb $ mount /dev/sdb /mnt/sdb $ xfs_io -f -c "pwrite -S 0xab 0 500K" /mnt/sdb/foobar $ xfs_io -c "falloc -k 1200K 800K" /mnt/sdb/foobar $ btrfs subvolume snapshot -r /mnt/sdb /mnt/sdb/base $ btrfs send -f /tmp/base.snap /mnt/sdb/base $ xfs_io -c "fpunch 0 500K" /mnt/sdb/foobar $ btrfs subvolume snapshot -r /mnt/sdb /mnt/sdb/incr $ btrfs send -p /mnt/sdb/base -f /tmp/incr.snap /mnt/sdb/incr $ md5sum /mnt/sdb/incr/foobar 816df6f64deba63b029ca19d880ee10a /mnt/sdb/incr/foobar $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt/sdc $ btrfs receive -f /tmp/base.snap /mnt/sdc $ btrfs receive -f /tmp/incr.snap /mnt/sdc $ md5sum /mnt/sdc/incr/foobar cf2ef71f4a9e90c2f6013ba3b2257ed2 /mnt/sdc/incr/foobar --> Different checksum, because the prealloc extent beyond the file's eof confused the hole detection code and it assumed a hole starting at offset 0 and ending at the offset of the prealloc extent (1200Kb) instead of ending at the offset 500Kb (the file's size). Fix this by ensuring we never cross the file's size when issuing the write operations for a hole. Fixes: 16e7549f ("Btrfs: incompatible format change to remove hole extents") CC: stable@vger.kernel.org # 3.14+ Signed-off-by: -
Dennis Zhou authored
The btrfs zstd workspace manager uses a background timer to reclaim not recently used workspaces. I used spin_lock() from this context which should have been caught with lockdep, but was not. This deadlock was reported in bugzilla. The fix is to switch the zstd wsm lock to use spin_lock_bh() from the softirq context. This happened quite relibably on ppc64, unlike on other architectures. [ 313.402874] ================================ [ 313.402875] WARNING: inconsistent lock state [ 313.402879] 5.1.0-rc7 #1 Not tainted [ 313.402880] -------------------------------- [ 313.402882] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 313.402885] swapper/5/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 313.402888] 0000000080d1120c (&(&wsm.lock)->rlock){+.?.}, at: .zstd_reclaim_timer_fn+0x40/0x230 [ 313.402895] {SOFTIRQ-ON-W} state was registered at: [ 313.402899] .lock_acquire+0xd0/0x240 [ 313.402903] ._raw_spin_lock+0x34/0x60 [ 313.402906] .zstd_get_workspace+0xd0/0x360 [ 313.402908] .end_compressed_bio_read+0x3b8/0x540 [ 313.402911] .bio_endio+0x174/0x2c0 [ 313.402914] .end_workqueue_fn+0x4c/0x70 [ 313.402917] .normal_work_helper+0x138/0x7e0 [ 313.402920] .process_one_work+0x324/0x790 [ 313.402922] .worker_thread+0x68/0x570 [ 313.402925] .kthread+0x19c/0x1b0 [ 313.402928] .ret_from_kernel_thread+0x58/0x78 [ 313.402930] irq event stamp: 2629216 [ 313.402933] hardirqs last enabled at (2629216): [<c0000000009da738>] ._raw_spin_unlock_irq+0x38/0x60 [ 313.402936] hardirqs last disabled at (2629215): [<c0000000009da4c4>] ._raw_spin_lock_irq+0x24/0x70 [ 313.402939] softirqs last enabled at (2629212): [<c0000000000af9fc>] .irq_enter+0x8c/0xd0 [ 313.402942] softirqs last disabled at (2629213): [<c0000000000afb58>] .irq_exit+0x118/0x170 [ 313.402944] other info that might help us debug this: [ 313.402945] Possible unsafe locking scenario: [ 313.402947] CPU0 [ 313.402948] ---- [ 313.402949] lock(&(&wsm.lock)->rlock); [ 313.402951] <Interrupt> [ 313.402952] lock(&(&wsm.lock)->rlock); [ 313.402954] *** DEADLOCK *** [ 313.402957] 1 lock held by swapper/5/0: [ 313.402958] #0: 000000004b612042 ((&wsm.timer)){+.-.}, at: .call_timer_fn+0x0/0x3c0 [ 313.402963] stack backtrace: [ 313.402967] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.1.0-rc7 #1 [ 313.402968] Call Trace: [ 313.402972] [c0000007fa262e70] [c0000000009b3294] .dump_stack+0xe0/0x15c (unreliable) [ 313.402975] [c0000007fa262f10] [c000000000125548] .print_usage_bug+0x348/0x390 [ 313.402978] [c0000007fa262fd0] [c000000000125cb4] .mark_lock+0x724/0x930 [ 313.402981] [c0000007fa263080] [c000000000126c20] .__lock_acquire+0xc90/0x16a0 [ 313.402984] [c0000007fa2631b0] [c000000000128040] .lock_acquire+0xd0/0x240 [ 313.402987] [c0000007fa263280] [c0000000009da2b4] ._raw_spin_lock+0x34/0x60 [ 313.402990] [c0000007fa263300] [c00000000054b0b0] .zstd_reclaim_timer_fn+0x40/0x230 [ 313.402993] [c0000007fa2633d0] [c000000000158b38] .call_timer_fn+0xc8/0x3c0 [ 313.402996] [c0000007fa2634a0] [c000000000158f74] .expire_timers+0x144/0x260 [ 313.402999] [c0000007fa263550] [c000000000159178] .run_timer_softirq+0xe8/0x230 [ 313.403002] [c0000007fa263680] [c0000000009db288] .__do_softirq+0x188/0x5d4 [ 313.403004] [c0000007fa263790] [c0000000000afb58] .irq_exit+0x118/0x170 [ 313.403008] [c0000007fa263800] [c000000000028d88] .timer_interrupt+0x158/0x430 [ 313.403012] [c0000007fa2638b0] [c0000000000091d4] decrementer_common+0x134/0x140 [ 313.403017] --- interrupt: 901 at replay_interrupt_return+0x0/0x4 LR = .arch_local_irq_restore.part.0+0x68/0x80 [ 313.403020] [c0000007fa263bb0] [c00000000001a3ac] .arch_local_irq_restore.part.0+0x2c/0x80 (unreliable) [ 313.403024] [c0000007fa263c30] [c0000000007bbbcc] .cpuidle_enter_state+0xec/0x670 [ 313.403027] [c0000007fa263d00] [c0000000000f5130] .call_cpuidle+0x40/0x90 [ 313.403031] [c0000007fa263d70] [c0000000000f554c] .do_idle+0x2dc/0x3a0 [ 313.403034] [c0000007fa263e30] [c0000000000f59ac] .cpu_startup_entry+0x2c/0x30 [ 313.403037] [c0000007fa263ea0] [c000000000045674] .start_secondary+0x644/0x650 [ 313.403041] [c0000007fa263f90] [c00000000000ad5c] start_secondary_prolog+0x10/0x14 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203517 Fixes: 3f93aef5 ("btrfs: add zstd compression level support") CC: stable@vger.kernel.org # 5.1+ Signed-off-by:Dennis Zhou <dennis@kernel.org> Reviewed-by:
-
Nikolay Borisov authored
Recent FITRIM work, namely bbbf7243 ("btrfs: combine device update operations during transaction commit") combined the way certain operations are recoded in a transaction. As a result an ASSERT was added in dev_replace_finish to ensure the new code works correctly. Unfortunately I got reports that it's possible to trigger the assert, meaning that during a device replace it's possible to have an unfinished chunk allocation on the source device. This is supposed to be prevented by the fact that a transaction is committed before finishing the replace oepration and alter acquiring the chunk mutex. This is not sufficient since by the time the transaction is committed and the chunk mutex acquired it's possible to allocate a chunk depending on the workload being executed on the replaced device. This bug has been present ever since device replace was introduced but there was never code which checks for it. The correct way to fix is to ensure that there is no pending device modification operation when the chunk mutex is acquire and if there is repeat transaction commit. Unfortunately it's not possible to just exclude the source device from btrfs_fs_devices::dev_alloc_list since this causes ENOSPC to be hit in transaction commit. Fixing that in another way would need to add special cases to handle the last writes and forbid new ones. The looped transaction fix is more obvious, and can be easily backported. The runtime of dev-replace is long so there's no noticeable delay caused by that. Reported-by:
-
- 16 May, 2019 6 commits
-
-
Filipe Manana authored
Having file extent items with ranges that overlap each other is a serious issue that leads to all sorts of corruptions and crashes (like a BUG_ON() during the course of __btrfs_drop_extents() when it traims file extent items). Therefore teach the tree checker to detect such cases. This is motivated by a recently fixed bug (race between ranged full fsync and writeback or adjacent ranges). Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
-
Filipe Manana authored
When we do a full fsync (the bit BTRFS_INODE_NEEDS_FULL_SYNC is set in the inode) that happens to be ranged, which happens during a msync() or writes for files opened with O_SYNC for example, we can end up with a corrupt log, due to different file extent items representing ranges that overlap with each other, or hit some assertion failures. When doing a ranged fsync we only flush delalloc and wait for ordered exents within that range. If while we are logging items from our inode ordered extents for adjacent ranges complete, we end up in a race that can make us insert the file extent items that overlap with others we logged previously and the assertion failures. For example, if tree-log.c:copy_items() receives a leaf that has the following file extents items, all with a length of 4K and therefore there is an implicit hole in the range 68K to 72K - 1: (257 EXTENT_ITEM 64K), (257 EXTENT_ITEM 72K), (257 EXTENT_ITEM 76K), ... It copies them to the log tree. However due to the need to detect implicit holes, it may release the path, in order to look at the previous leaf to detect an implicit hole, and then later it will search again in the tree for the first file extent item key, with the goal of locking again the leaf (which might have changed due to concurrent changes to other inodes). However when it locks again the leaf containing the first key, the key corresponding to the extent at offset 72K may not be there anymore since there is an ordered extent for that range that is finishing (that is, somewhere in the middle of btrfs_finish_ordered_io()), and it just removed the file extent item but has not yet replaced it with a new file extent item, so the part of copy_items() that does hole detection will decide that there is a hole in the range starting from 68K to 76K - 1, and therefore insert a file extent item to represent that hole, having a key offset of 68K. After that we now have a log tree with 2 different extent items that have overlapping ranges: 1) The file extent item copied before copy_items() released the path, which has a key offset of 72K and a length of 4K, representing the file range 72K to 76K - 1. 2) And a file extent item representing a hole that has a key offset of 68K and a length of 8K, representing the range 68K to 76K - 1. This item was inserted after releasing the path, and overlaps with the extent item inserted before. The overlapping extent items can cause all sorts of unpredictable and incorrect behaviour, either when replayed or if a fast (non full) fsync happens later, which can trigger a BUG_ON() when calling btrfs_set_item_key_safe() through __btrfs_drop_extents(), producing a trace like the following: [61666.783269] ------------[ cut here ]------------ [61666.783943] kernel BUG at fs/btrfs/ctree.c:3182! [61666.784644] invalid opcode: 0000 [#1] PREEMPT SMP (...) [61666.786253] task: ffff880117b88c40 task.stack: ffffc90008168000 [61666.786253] RIP: 0010:btrfs_set_item_key_safe+0x7c/0xd2 [btrfs] [61666.786253] RSP: 0018:ffffc9000816b958 EFLAGS: 00010246 [61666.786253] RAX: 0000000000000000 RBX: 000000000000000f RCX: 0000000000030000 [61666.786253] RDX: 0000000000000000 RSI: ffffc9000816ba4f RDI: ffffc9000816b937 [61666.786253] RBP: ffffc9000816b998 R08: ffff88011dae2428 R09: 0000000000001000 [61666.786253] R10: 0000160000000000 R11: 6db6db6db6db6db7 R12: ffff88011dae2418 [61666.786253] R13: ffffc9000816ba4f R14: ffff8801e10c4118 R15: ffff8801e715c000 [61666.786253] FS: 00007f6060a18700(0000) GS:ffff88023f5c0000(0000) knlGS:0000000000000000 [61666.786253] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [61666.786253] CR2: 00007f6060a28000 CR3: 0000000213e69000 CR4: 00000000000006e0 [61666.786253] Call Trace: [61666.786253] __btrfs_drop_extents+0x5e3/0xaad [btrfs] [61666.786253] ? time_hardirqs_on+0x9/0x14 [61666.786253] btrfs_log_changed_extents+0x294/0x4e0 [btrfs] [61666.786253] ? release_extent_buffer+0x38/0xb4 [btrfs] [61666.786253] btrfs_log_inode+0xb6e/0xcdc [btrfs] [61666.786253] ? lock_acquire+0x131/0x1c5 [61666.786253] ? btrfs_log_inode_parent+0xee/0x659 [btrfs] [61666.786253] ? arch_local_irq_save+0x9/0xc [61666.786253] ? btrfs_log_inode_parent+0x1f5/0x659 [btrfs] [61666.786253] btrfs_log_inode_parent+0x223/0x659 [btrfs] [61666.786253] ? arch_local_irq_save+0x9/0xc [61666.786253] ? lockref_get_not_zero+0x2c/0x34 [61666.786253] ? rcu_read_unlock+0x3e/0x5d [61666.786253] btrfs_log_dentry_safe+0x60/0x7b [btrfs] [61666.786253] btrfs_sync_file+0x317/0x42c [btrfs] [61666.786253] vfs_fsync_range+0x8c/0x9e [61666.786253] SyS_msync+0x13c/0x1c9 [61666.786253] entry_SYSCALL_64_fastpath+0x18/0xad A sample of a corrupt log tree leaf with overlapping extents I got from running btrfs/072: item 14 key (295 108 200704) itemoff 2599 itemsize 53 extent data disk bytenr 0 nr 0 extent data offset 0 nr 458752 ram 458752 item 15 key (295 108 659456) itemoff 2546 itemsize 53 extent data disk bytenr 4343541760 nr 770048 extent data offset 606208 nr 163840 ram 770048 item 16 key (295 108 663552) itemoff 2493 itemsize 53 extent data disk bytenr 4343541760 nr 770048 extent data offset 610304 nr 155648 ram 770048 item 17 key (295 108 819200) itemoff 2440 itemsize 53 extent data disk bytenr 4334788608 nr 4096 extent data offset 0 nr 4096 ram 4096 The file extent item at offset 659456 (item 15) ends at offset 823296 (659456 + 163840) while the next file extent item (item 16) starts at offset 663552. Another different problem that the race can trigger is a failure in the assertions at tree-log.c:copy_items(), which expect that the first file extent item key we found before releasing the path exists after we have released path and that the last key we found before releasing the path also exists after releasing the path: $ cat -n fs/btrfs/tree-log.c 4080 if (need_find_last_extent) { 4081 /* btrfs_prev_leaf could return 1 without releasing the path */ 4082 btrfs_release_path(src_path); 4083 ret = btrfs_search_slot(NULL, inode->root, &first_key, 4084 src_path, 0, 0); 4085 if (ret < 0) 4086 return ret; 4087 ASSERT(ret == 0); (...) 4103 if (i >= btrfs_header_nritems(src_path->nodes[0])) { 4104 ret = btrfs_next_leaf(inode->root, src_path); 4105 if (ret < 0) 4106 return ret; 4107 ASSERT(ret == 0); 4108 src = src_path->nodes[0]; 4109 i = 0; 4110 need_find_last_extent = true; 4111 } (...) The second assertion implicitly expects that the last key before the path release still exists, because the surrounding while loop only stops after we have found that key. When this assertion fails it produces a stack like this: [139590.037075] assertion failed: ret == 0, file: fs/btrfs/tree-log.c, line: 4107 [139590.037406] ------------[ cut here ]------------ [139590.037707] kernel BUG at fs/btrfs/ctree.h:3546! [139590.038034] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI [139590.038340] CPU: 1 PID: 31841 Comm: fsstress Tainted: G W 5.0.0-btrfs-next-46 #1 (...) [139590.039354] RIP: 0010:assfail.constprop.24+0x18/0x1a [btrfs] (...) [139590.040397] RSP: 0018:ffffa27f48f2b9b0 EFLAGS: 00010282 [139590.040730] RAX: 0000000000000041 RBX: ffff897c635d92c8 RCX: 0000000000000000 [139590.041105] RDX: 0000000000000000 RSI: ffff897d36a96868 RDI: ffff897d36a96868 [139590.041470] RBP: ffff897d1b9a0708 R08: 0000000000000000 R09: 0000000000000000 [139590.041815] R10: 0000000000000008 R11: 0000000000000000 R12: 0000000000000013 [139590.042159] R13: 0000000000000227 R14: ffff897cffcbba88 R15: 0000000000000001 [139590.042501] FS: 00007f2efc8dee80(0000) GS:ffff897d36a80000(0000) knlGS:0000000000000000 [139590.042847] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [139590.043199] CR2: 00007f8c064935e0 CR3: 0000000232252002 CR4: 00000000003606e0 [139590.043547] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [139590.043899] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [139590.044250] Call Trace: [139590.044631] copy_items+0xa3f/0x1000 [btrfs] [139590.045009] ? generic_bin_search.constprop.32+0x61/0x200 [btrfs] [139590.045396] btrfs_log_inode+0x7b3/0xd70 [btrfs] [139590.045773] btrfs_log_inode_parent+0x2b3/0xce0 [btrfs] [139590.046143] ? do_raw_spin_unlock+0x49/0xc0 [139590.046510] btrfs_log_dentry_safe+0x4a/0x70 [btrfs] [139590.046872] btrfs_sync_file+0x3b6/0x440 [btrfs] [139590.047243] btrfs_file_write_iter+0x45b/0x5c0 [btrfs] [139590.047592] __vfs_write+0x129/0x1c0 [139590.047932] vfs_write+0xc2/0x1b0 [139590.048270] ksys_write+0x55/0xc0 [139590.048608] do_syscall_64+0x60/0x1b0 [139590.048946] entry_SYSCALL_64_after_hwframe+0x49/0xbe [139590.049287] RIP: 0033:0x7f2efc4be190 (...) [139590.050342] RSP: 002b:00007ffe743243a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [139590.050701] RAX: ffffffffffffffda RBX: 0000000000008d58 RCX: 00007f2efc4be190 [139590.051067] RDX: 0000000000008d58 RSI: 00005567eca0f370 RDI: 0000000000000003 [139590.051459] RBP: 0000000000000024 R08: 0000000000000003 R09: 0000000000008d60 [139590.051863] R10: 0000000000000078 R11: 0000000000000246 R12: 0000000000000003 [139590.052252] R13: 00000000003d3507 R14: 00005567eca0f370 R15: 0000000000000000 (...) [139590.055128] ---[ end trace 193f35d0215cdeeb ]--- So fix this race between a full ranged fsync and writeback of adjacent ranges by flushing all delalloc and waiting for all ordered extents to complete before logging the inode. This is the simplest way to solve the problem because currently the full fsync path does not deal with ranges at all (it assumes a full range from 0 to LLONG_MAX) and it always needs to look at adjacent ranges for hole detection. For use cases of ranged fsyncs this can make a few fsyncs slower but on the other hand it can make some following fsyncs to other ranges do less work or no need to do anything at all. A full fsync is rare anyway and happens only once after loading/creating an inode and once after less common operations such as a shrinking truncate. This is an issue that exists for a long time, and was often triggered by generic/127, because it does mmap'ed writes and msync (which triggers a ranged fsync). Adding support for the tree checker to detect overlapping extents (next patch in the series) and trigger a WARN() when such cases are found, and then calling btrfs_check_leaf_full() at the end of btrfs_insert_file_extent() made the issue much easier to detect. Running btrfs/072 with that change to the tree checker and making fsstress open files always with O_SYNC made it much easier to trigger the issue (as triggering it with generic/127 is very rare). CC: stable@vger.kernel.org # 3.16+ Reviewed-by: -
Filipe Manana authored
When we are doing a full fsync (bit BTRFS_INODE_NEEDS_FULL_SYNC set) of a file that has holes and has file extent items spanning two or more leafs, we can end up falling to back to a full transaction commit due to a logic bug that leads to failure to insert a duplicate file extent item that is meant to represent a hole between the last file extent item of a leaf and the first file extent item in the next leaf. The failure (EEXIST error) leads to a transaction commit (as most errors when logging an inode do). For example, we have the two following leafs: Leaf N: ----------------------------------------------- | ..., ..., ..., (257, FILE_EXTENT_ITEM, 64K) | ----------------------------------------------- The file extent item at the end of leaf N has a length of 4Kb, representing the file range from 64K to 68K - 1. Leaf N + 1: ----------------------------------------------- | (257, FILE_EXTENT_ITEM, 72K), ..., ..., ... | ----------------------------------------------- The file extent item at the first slot of leaf N + 1 has a length of 4Kb too, representing the file range from 72K to 76K - 1. During the full fsync path, when we are at tree-log.c:copy_items() with leaf N as a parameter, after processing the last file extent item, that represents the extent at offset 64K, we take a look at the first file extent item at the next leaf (leaf N + 1), and notice there's a 4K hole between the two extents, and therefore we insert a file extent item representing that hole, starting at file offset 68K and ending at offset 72K - 1. However we don't update the value of *last_extent, which is used to represent the end offset (plus 1, non-inclusive end) of the last file extent item inserted in the log, so it stays with a value of 68K and not with a value of 72K. Then, when copy_items() is called for leaf N + 1, because the value of *last_extent is smaller then the offset of the first extent item in the leaf (68K < 72K), we look at the last file extent item in the previous leaf (leaf N) and see it there's a 4K gap between it and our first file extent item (again, 68K < 72K), so we decide to insert a file extent item representing the hole, starting at file offset 68K and ending at offset 72K - 1, this insertion will fail with -EEXIST being returned from btrfs_insert_file_extent() because we already inserted a file extent item representing a hole for this offset (68K) in the previous call to copy_items(), when processing leaf N. The -EEXIST error gets propagated to the fsync callback, btrfs_sync_file(), which falls back to a full transaction commit. Fix this by adjusting *last_extent after inserting a hole when we had to look at the next leaf. Fixes: 4ee3fad3 ("Btrfs: fix fsync after hole punching when using no-holes feature") Cc: stable@vger.kernel.org # 4.14+ Reviewed-by:
-
Qu Wenruo authored
Commit ddf30cf0 ("btrfs: extent-tree: Use btrfs_ref to refactor add_pinned_bytes()") refactored add_pinned_bytes(), but during that refactor, there are two callers which add the pinned bytes instead of subtracting. That refactor misses those two caller, causing incorrect pinned bytes calculation and resulting unexpected ENOSPC error. Fix it by adding a new parameter @sign to restore the original behavior. Reported-by:
kernel test robot <rong.a.chen@intel.com> Fixes: ddf30cf0 ("btrfs: extent-tree: Use btrfs_ref to refactor add_pinned_bytes()") Signed-off-by:
-
Tobin C. Harding authored
A failed call to kobject_init_and_add() must be followed by a call to kobject_put(). Currently in the error path when adding fs_devices we are missing this call. This could be fixed by calling btrfs_sysfs_remove_fsid() if btrfs_sysfs_add_fsid() returns an error or by adding a call to kobject_put() directly in btrfs_sysfs_add_fsid(). Here we choose the second option because it prevents the slightly unusual error path handling requirements of kobject from leaking out into btrfs functions. Add a call to kobject_put() in the error path of kobject_add_and_init(). This causes the release method to be called if kobject_init_and_add() fails. open_tree() is the function that calls btrfs_sysfs_add_fsid() and the error code in this function is already written with the assumption that the release method is called during the error path of open_tree() (as seen by the call to btrfs_sysfs_remove_fsid() under the fail_fsdev_sysfs label). Cc: stable@vger.kernel.org # v4.4+ Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Tobin C. Harding <tobin@kernel.org> Reviewed-by:
-
Tobin C. Harding authored
If a call to kobject_init_and_add() fails we must call kobject_put() otherwise we leak memory. Calling kobject_put() when kobject_init_and_add() fails drops the refcount back to 0 and calls the ktype release method (which in turn calls the percpu destroy and kfree). Add call to kobject_put() in the error path of call to kobject_init_and_add(). Cc: stable@vger.kernel.org # v4.4+ Reviewed-by:
-
- 09 May, 2019 2 commits
-
-
Filipe Manana authored
Currently when we fail to COW a path at btrfs_update_root() we end up always aborting the transaction. However all the current callers of btrfs_update_root() are able to deal with errors returned from it, many do end up aborting the transaction themselves (directly or not, such as the transaction commit path), other BUG_ON() or just gracefully cancel whatever they were doing. When syncing the fsync log, we call btrfs_update_root() through tree-log.c:update_log_root(), and if it returns an -ENOSPC error, the log sync code does not abort the transaction, instead it gracefully handles the error and returns -EAGAIN to the fsync handler, so that it falls back to a transaction commit. Any other error different from -ENOSPC, makes the log sync code abort the transaction. So remove the transaction abort from btrfs_update_log() when we fail to COW a path to update the root item, so that if an -ENOSPC failure happens we avoid aborting the current transaction and have a chance of the fsync succeeding after falling back to a transaction commit. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203413 Fixes: 79787eaa ("btrfs: replace many BUG_ONs with proper error handling") Cc: stable@vger.kernel.org # 4.4+ Signed-off-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
Josef Bacik authored
We're now reserving an extra items worth of space for property inheritance. We only have one property at the moment so this covers us, but if we add more in the future this will allow us to not get bitten by the extra space reservation. If we do add more properties in the future we should re-visit how we calculate the space reservation needs by the callers. Reviewed-by:
-
- 03 May, 2019 2 commits
-
-
Josef Bacik authored
If we have an error writing out a delalloc range in btrfs_punch_hole_lock_range we'll unlock the inode and then goto out_only_mutex, where we will again unlock the inode. This is bad, don't do this. Fixes: f27451f2 ("Btrfs: add support for fallocate's zero range operation") CC: stable@vger.kernel.org # 4.19+ Reviewed-by:
-
Johnny Chang authored
When a file's compression property is set as zlib or zstd but leave the compression mount option not be set, that means btrfs will try to compress the file with default compression level. But in btrfs_compress_pages(), it calls get_workspace() with level = 0. This will return a workspace with a wrong compression level. For zlib, the compression level in the workspace will be 0 (that means "store only"). And for zstd, the compression in the workspace will be 1, not the default level 3. How to reproduce: mkfs -t btrfs /dev/sdb mount /dev/sdb /mnt/ mkdir /mnt/zlib btrfs property set /mnt/zlib/ compression zlib dd if=/dev/zero of=/mnt/zlib/compression-friendly-file-10M bs=1M count=10 sync btrfs-debugfs -f /mnt/zlib/compression-friendly-file-10M btrfs-debugfs output: * before: ... (258 9961472): ram 524288 disk 1106247680 disk_size 524288 file: ... extents 20 disk size 10485760 logical size 10485760 ratio 1.00 * after: ... (258 10354688): ram 131072 disk 14217216 disk_size 4096 file: ... extents 80 disk size 327680 logical size 10485760 ratio 32.00 The steps for zstd are similar, but need to put a debugging message to show the level of the return workspace in zstd_get_workspace(). This commit adds a check of the compression level before getting a workspace by set_level(). CC: stable@vger.kernel.org # 5.1+ Signed-off-by:
Johnny Chang <johnnyc@synology.com> Reviewed-by:
-
- 02 May, 2019 9 commits
-
-
Nikolay Borisov authored
Recent refactoring of cow_file_range_async means it's now possible to request a rather large physically contiguous memory via kmalloc. The size is dependent on the number of 512k chunks that the compressed range consists of. David reported multiple OOM messages on such large allocations. Fix it by switching to using kvmalloc. Signed-off-by:
-
Nikolay Borisov authored
Irrespective of whether the compress code fell back to uncompressed or a compressed extent has to be submitted, the extent range is always locked. So factor out the common lock_extent call at the beginning of the loop. No functional changes just removes one duplicate lock_extent call. Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Nikolay Borisov authored
The inode never changes so it's sufficient to dereference it and get the iotree only once, before the execution of the main loop. No functional changes, only the size of the function is decreased: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-44 (-44) Function old new delta submit_compressed_extents 1240 1196 -44 Total: Before=88476, After=88432, chg -0.05% Reviewed-by:
-
Nikolay Borisov authored
Reviewed-by:
-
Nikolay Borisov authored
All context this function needs is held within struct async_chunk. Currently we not only pass the struct but also every individual member. This is redundant, simplify it by only passing struct async_chunk and leaving it to compress_file_range to extract the values it requires. No functional changes. Reviewed-by:
-
Nikolay Borisov authored
The associated btrfs_work already contains a reference to the fs_info so use that instead of passing it via async_chunk. No functional changes. Reviewed-by:
-
Nikolay Borisov authored
Now that we have an explicit async_chunk struct rename references to variables of this type to async_chunk. No functional changes. Reviewed-by:
-
Nikolay Borisov authored
This commit changes the implementation of cow_file_range_async in order to get rid of the BUG_ON in the middle of the loop. Additionally it reworks the inner loop in the hopes of making it more understandable. The idea is to make async_cow be a top-level structured, shared amongst all chunks being sent for compression. This allows to perform one memory allocation at the beginning and gracefully fail the IO if there isn't enough memory. Now, each chunk is going to be described by an async_chunk struct. It's the responsibility of the final chunk to actually free the memory. Reviewed-by:
-
Josef Bacik authored
With the per-inode block reserves we started refilling the reserve based on the calculated size of the outstanding csum bytes and extents for the inode, including the amount we were adding with the new operation. However, generic/224 exposed a problem with this approach. With 1000 files all writing at the same time we ended up with a bunch of bytes being reserved but unusable. When you write to a file we reserve space for the csum leaves for those bytes, the number of extent items required to cover those bytes, and a single transaction item for updating the inode at ordered extent finish for that range of bytes. This is held until the ordered extent finishes and we release all of the reserved space. If a second write comes in at this point we would add a single reservation for the new outstanding extent and however many reservations for the csum leaves. At this point we find the delta of how much we have reserved and how much outstanding size this is and attempt to reserve this delta. If the first write finishes it will not release any space, because the space it had reserved for the initial write is still needed for the second write. However some space would have been used, as we have added csums, extent items, and dirtied the inode. Our reserved space would be > 0 but less than the total needed reserved space. This is just for a single inode, now consider generic/224. This has 1000 inodes writing in parallel to a very small file system, 1GiB. In my testing this usually means we get about a 120MiB metadata area to work with, more than enough to allow the writes to continue, but not enough if all of the inodes are stuck trying to reserve the slack space while continuing to hold their leftovers from their initial writes. Fix this by pre-reserved _only_ for the space we are currently trying to add. Then once that is successful modify our inodes csum count and outstanding extents, and then add the newly reserved space to the inodes block_rsv. This allows us to actually pass generic/224 without running out of metadata space. Signed-off-by:
-
- 29 Apr, 2019 8 commits
-
-
Josef Bacik authored
When diagnosing a slowdown of generic/224 I noticed we were not doing anything when calling into shrink_delalloc(). This is because all writes in 224 are O_DIRECT, not delalloc, and thus our delalloc_bytes counter is 0, which short circuits most of the work inside of shrink_delalloc(). However O_DIRECT writes still consume metadata resources and generate ordered extents, which we can still wait on. Fix this by tracking outstanding DIO write bytes, and use this as well as the delalloc bytes counter to decide if we need to lookup and wait on any ordered extents. If we have more DIO writes than delalloc bytes we'll go ahead and wait on any ordered extents regardless of our flush state as flushing delalloc is likely to not gain us anything. Signed-off-by:
-
Anand Jain authored
Since now the trans argument is never NULL in btrfs_set_prop we don't have to check. So delete it and use btrfs_setxattr that makes use of that. Signed-off-by:
-
Anand Jain authored
The last consumer of btrfs_set_prop_trans() was taken away by the patch ("btrfs: start transaction in xattr_handler_set_prop") so now this function can be deleted. Signed-off-by: -
Anand Jain authored
btrfs specific extended attributes on the inode are set using btrfs_xattr_handler_set_prop(), and the required transaction for this update is started by btrfs_setxattr(). For better visibility of the transaction start and end, do this in btrfs_xattr_handler_set_prop(). For which this patch copied code of btrfs_setxattr() as it is in the original, which needs proper error handling. Signed-off-by:
-
Anand Jain authored
There isn't real use of making struct inode::i_mode a local copy, it saves a dereference one time, not much. Just use it directly. Signed-off-by:
-
Anand Jain authored
btrfs_inode_flags_to_fsflags() is copied into @old_fsflags and used only once. Instead used it directly. Signed-off-by:
-
Anand Jain authored
Instead of updating the binode::flags directly, update a local copy, and then at the point of no error, store copy it to the binode::flags. Signed-off-by:
-
Anand Jain authored
The patch ("btrfs: start transaction in btrfs_ioctl_setflags()") used btrfs_set_prop() instead of btrfs_set_prop_trans() by which now the inode::i_flags update functions such as btrfs_sync_inode_flags_to_i_flags() and btrfs_update_inode() is called in btrfs_ioctl_setflags() instead of btrfs_set_prop_trans()->btrfs_setxattr() as earlier. So the inode::i_flags remains unmodified until the thread has checked all the conditions. So drop the saved inode::i_flags in out_i_flags. Signed-off-by:
-
