- 18 May, 2010 40 commits
-
-
Jonathan Corbet authored
Get rid of some "unused variable" warnings. These were the result of sloppiness and should not have happened; I'll go stand in the corner now. Reported-by:
Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jonathan Corbet authored
That makes frame rate configuration persistent. Signed-off-by:
-
Jonathan Corbet authored
The Cafe controller doesn't do non-SMBUS I/O, so we have to use it there. Signed-off-by:
-
Jonathan Corbet authored
Signed-off-by:
-
Jonathan Corbet authored
Allow applications to play with the gain settings. Signed-off-by:
-
Jonathan Corbet authored
Contrary to my earlier belief, the ov7670 is not actually an SMBUS device, though it will pretend to be one if it's in a good mood. Unfortunately, it's rarely in a good mood, especially on the XO 1.5. So use low-level i2c I/O instead. Signed-off-by:
-
Jonathan Corbet authored
Reading the clkrc register creates flaky behavior in some situations, and we can easily track its state separately. Signed-off-by:
-
Jonathan Corbet authored
Also provide for a longer delay after reset - the XO 1.5 needs it. Signed-off-by:
-
Dan Carpenter authored
card->driver is 15 characters and a NULL. The original code goes past the end of the array. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Dan Carpenter authored
card->driver is 15 characters and a NULL, the original code could cause a buffer overflow. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by Randy Dunlap <randy.dunlap@oracle.com>: drivers/staging/cx25821/cx25821-video.c:89:struct cx25821_fmt *format_by_fourcc(unsigned int fourcc) (not static) conflicts with (has the same non-static name as) drivers/media/common/saa7146_video.c:87:struct saa7146_format* format_by_fourcc(struct saa7146_dev *dev, int fourcc) To solve, add cx25821_ prefix to the exported functions found on cx25821-video.h. This patch were generated by this little shell/perl script: cat drivers/staging/cx25821/cx25821-video.h|perl -ne \ 'if (m/extern.* ([^\s\*]+)\(/) { $n=$1; print "s/([^\d\w_\.])$1/\\1cx25821_$1/g;\n" if (!($n =~ m/cx25821/)); }' \ >changes; for i in drivers/staging/cx25821/*.[ch]; do sed -r -f changes $i >a && mv a $i; done Signed-off-by: -
Mauro Carvalho Chehab authored
Table indent were likely damaged by Lindent. Fix it. Signed-off-by: -
Olimpiu Pascariu authored
Fixes up warnings and errors found by the checkpatch.pl tool on cx25821-i2c.c Signed-off-by:
Olimpiu Pascariu <olimpiu.pascariu@gmail.com> Cc: Palash Bandyopadhyay <palash.bandyopadhyay@conexant.com> Signed-off-by:
-
Olimpiu Pascariu authored
Fixes up warnings and errors found by the checkpatch.pl tool on cx25821-medusa-video.c Signed-off-by:
-
Olimpiu Pascariu authored
Fixes up warnings and errors found by the checkpatch.pl tool on cx25821-gpio.c. Signed-off-by:
-
Olimpiu Pascariu authored
Fixes up warnings and errors found by the checkpatch.pl tool on cx25821-core.c. Signed-off-by:
-
Mauro Carvalho Chehab authored
This patch fixes up some warnings&errors found by the checkpatch.pl script Signed-off-by:
-
Dan Carpenter authored
This fixes a smatch warning: drivers/media/video/ivtv/ivtv-vbi.c +138 ivtv_write_vbi(43) error: buffer overflow 'vi->cc_payload' 256 <= 1023 Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Pawel Osciak authored
Make videobuf pass checkpatch; minor code cleanups. Signed-off-by:
Pawel Osciak <p.osciak@samsung.com> Reviewed-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Dmitri Belimov authored
Add support SPI bus to v4l2. Useful for control some device with SPI bus like hardware MPEG2 encoders and etc. Signed-off-by:
Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Devin Heitmueller authored
Add support for design which has an em2863/tvp5150 and uses the standard empia USB ID. In Sander's case, it was branded as an "Eminent model EM3705" Thanks to Sander Van Ginkel for testing and help debugging the support. [mchehab@redhat.com: move it to a vague card number slot (card=29)] Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
It seems that I merged a wrong version of the patch or that changeset 4d770eeb926d0bc44c0bd68d051d3d2a5568ef41 got mangled somehow: It were missed the #else to avoid compilation troubles. Signed-off-by: -
Mauro Carvalho Chehab authored
Fixes sync with -hg tree Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
There are some missing entries there Signed-off-by: -
Devin Heitmueller authored
Add the ability to use the v4l2_ctrl_query_fill() function for the newly introduced chroma gain control. Also, make use of the centralized function by the one caller. This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
Add support for chroma agc and gain to the saa7115 driver. This allows for users to do manual adjustment for abnormal signal conditions. This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
Introduce a new control for modifying the chroma gain. This allows for user intervention in abnormal signal conditions cases where the decoder's chroma AGC cannot compensate and the value needs to be adjusted manually. This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
This patch enables the anti-alias filter, which was originally enabled for the saa7113, but the saa7115_init_misc was trampling the value. Without this patch, there would be visible vertical bands in the chroma. Thanks to Andy Walls for helping test this change against other ivtv products. This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
Rework the logic for tracking the amount of data copied to the VBI buffer, to address problem found where the video lines are several bytes shifted to the right (and the leading pixels in the first line rendered are garbage). This would occur because the copy function would advance the pointer when detecting headers, but the caller would not adjust the length actually copied. This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
It turns up we can reduce the starting line for the active area, which results in more data being captured when under PAL (while the full VBI capture window still stays properly encoded). This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
Increase the packets per URB count from 40 to 64. I suspect that whoever was looking at the usbsnoop captures saw "0x40" packets and mistook it for "40". As a result of this change, I can see a 25% reduction in the number of interrupts generated via powertop. This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Hans de Goede authored
The hv7131d sensor code also works for the hv7131e, this patch changes it to also recognize the hv7131e sensor id. Tested-by:
Frank Danapfel <fdanapfe@redhat.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
gspca_spca561: Add support for camera button Signed-off-by:
-
Hans de Goede authored
Fix LED control on rev12a cameras and remove the unneeded sd_stop0 callback function. Signed-off-by:
-
Brian Johnson authored
Fixed buggy init sequence for the OV9655 sensor. Tested with a 0c45:6288 and 0c45:62b3. Signed-off-by:
Brian Johnson <brijohn@gmail.com> Signed-off-by:
-
Brian Johnson authored
Adds the following models: - 0c45:624c - 0c45:628c - 0458:704a - 0458:704c Signed-off-by:
-
Brian Johnson authored
Add support for detecting webcams that are mounted upside down in laptops. Currently the only two known are two MSI modesl using the 0c45:624f. Signed-off-by:
-
Brian Johnson authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Drop custom code for handling the input button in favor of using gspca's input hanlding mechinism. Signed-off-by:
-
