- 25 Apr, 2017 18 commits
-
-
Oliver Hartkopp authored
The CAN_BCM protocol and its procfs entries were not implemented as per-net in the initial network namespace support by Mario Kicherer (8e8cda6d). This patch adds the missing per-net functionality for the CAN BCM. Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Oliver Hartkopp authored
The statistics and its proc output was not implemented as per-net in the initial network namespace support by Mario Kicherer (8e8cda6d). This patch adds the missing per-net statistics for the CAN subsystem. Signed-off-by:
-
Oliver Hartkopp authored
can_rx_alldev_list is a per-net data structure now. Remove it's definition here and can_rx_dev_list too. Signed-off-by:
-
Oliver Hartkopp authored
The namespace support for the CAN subsystem does not need any additional memory. So when ".size = 0" there's no extra memory allocated by the system. And therefore ".id" is obsolete too. Signed-off-by:
-
Oliver Hartkopp authored
The can_rx_alldev_list is a per-net data structure now and allocated in can_pernet_init(). Make sure the memory is free'd in can_pernet_exit() too. Signed-off-by:
-
Remigiusz Kołłątaj authored
SocketCAN driver for Microchip CAN BUS Analyzer (http://www.microchip.com/development-tools/) Changes in v4: - possible memory leak fixed in mcba_usb_write_bulk_callback - LED support added - failure handling in mcba_usb_probe improved - C99 initializers for structs on stack Changes in v3: - improved/simplified CAN ID conversion - functions for transmission of skb and cmd separated - fixed/improved netif_stop_queue handling - style/cosmetic corrections Changes in v2: - Termination handling reimplemented to fit new netlink API (IFLA_CAN_TERMINATION) - Bitrate handling reimplemented to fit new netlink API (IFLA_CAN_BITRATE) - CAN ID conversion refactored (changed from macro to inline functions) - CAN DLC handling using get_can_dlc() - Endianness handling for can_speed introduced - Debugging removed - Redundant error prints removed - Style/cosmetic corrections (i.e. macro names, redefs, inits etc.) Signed-off-by:
Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com> Signed-off-by:
-
Mario Huettel authored
* Added defines for TX Event FIFO Element * Adapted ndo_start_xmit function. For versions >= v3.1.x it uses the TX FIFO to optimize the data throughput. It stores the echo skb at the same index as in the M_CAN's TX FIFO. The frame's message marker is set to this index. This message marker is received in the TX Event FIFO after the message was successfully transmitted. It is used to echo the correct echo skb back to the network stack. * Added m_can_echo_tx_event function. It reads all received message markers in the TX Event FIFO and loops back the corresponding echo skbs. * ISR checks for new TX Event Entry interrupt for version >= 3.1.x. Signed-off-by:
Mario Huettel <mario.huettel@gmx.net> Reviewed-by:
Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by:
-
Mario Huettel authored
* TX/TX Event FIFO sizes are configured for version >= v3.1.x Signed-off-by:
-
Mario Huettel authored
This patch adapts the initialization of the M_CAN. So it can be used with all versions >= 3.0.x. Changes: * Added version element to m_can_priv structure to hold M_CAN version. * Renamed bittiming structs for version 3.0.x * Added new bittiming structs for version >= 3.1.x * Function alloc_m_can_dev takes 2 new arguments. The TX FIFO size and the base address of the module. * Chip configuration for CAN_CTRLMODE_LOOPBACK is changed: Enabled CCCR_MON bit. In combination with TEST_LBCK it activates the internal loopback mode. Leaving CCCR_MON '0' results in external loopback mode. * Clocks are temporarily enabled by platform_propbe function in order to allow read access to the Core Release register and the Control Register. Registers are used to detect M_CAN version and optional Non-ISO Feature. Initialization of M_CAN for version >= 3.1.x: * TX FIFO of M_CAN is used to transmit frames. The driver does not need to stop the tx queue after each frame sent. * Initialization of TX Event FIFO is added. * NON-ISO is fixed for all M_CAN versions < 3.2.x. Version 3.2.x _can_ have the NISO (Non-ISO) bit which can switch the mode of the M_CAN to Non-ISO mode. This bit does not have to be writeable. Therefore it is checked. If it is writable Non-ISO support is added to the controllers supported CAN modes. New Functions: * Function to check the Core Release version. The read value determines the behaviour of the driver. * Function to check if the NISO bit for version >= 3.2.x is implemented. Signed-off-by:
-
Mario Huettel authored
* Updated register defines to newest M_CAN version (v3.2.1). * Changed defines in the whole code. Signed-off-by:
-
Mario Huettel authored
The virtual address of the device was printed. I removed it because it leaks internal information. Signed-off-by:
-
Mario Huettel authored
FIFO water marks disabled because the driver doesn't handle water mark events. Signed-off-by:
-
Mario Huettel authored
* Disabled interrupt line 1. The driver didn't use it. Signed-off-by:
-
Stephane Grosjean authored
This patch adds the support of the PCAN-PCI Express FD boards made by PEAK-System, for computers using the PCI Express slot. The PCAN-PCI Express FD has one or two CAN FD channels, depending on the model. A galvanic isolation of the CAN ports protects the electronics of the card and the respective computer against disturbances of up to 500 Volts. The PCAN-PCI Express FD can be operated with ambient temperatures in a range of -40 to +85 °C. Such boards run an extented version of the CAN-FD IP running into USB CAN-FD interfaces from PEAK-System, so this patch adds several new commands and their corresponding data types to the PEAK CAN-FD common definitions header file too. Signed-off-by:
Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by:
-
Stephane Grosjean authored
The CAN-FD IP from PEAK-System runs into several kinds of PC CAN-FD interfaces. Up to now, only the USB CAN-FD adapters were supported by the Kernel. In order to prepare the adding of some new non-USB CAN-FD interfaces, this patch moves - and rename - the IP definitions file from its private (usb) sub-directory into a - newly created - CAN specific one. Signed-off-by:
-
Stephane Grosjean authored
Fixes the usage of the const qualifier in the memory pointer arguments of the declared inline functions. By changing the line containing "const", this patch also changes the name of the arg into a more usual one. Signed-off-by:
-
Stephane Grosjean authored
This patch fixes the wrong usage of a specific USB data type into a common header file. This common header file is intended to define the common data types and values that define access to the PEAK-System CAN-FD IP, whatever the PC interface is. Signed-off-by:
-
David S. Miller authored
Doing a full 64-bit decomposition is really stupid especially for simple values like 0 and -1. But if we are going to optimize this, go all the way and try for all 2 and 3 instruction sequences not requiring a temporary register as well. First we do the easy cases where it's a zero or sign extended 32-bit number (sethi+or, sethi+xor, respectively). Then we try to find a range of set bits we can load simply then shift up into place, in various ways. Then we try negating the constant and see if we can do a simple sequence using that with a xor at the end. (f.e. the range of set bits can't be loaded simply, but for the negated value it can) The final optimized strategy involves 4 instructions sequences not needing a temporary register. Otherwise we sadly fully decompose using a temp.. Example, from ALU64_XOR_K: 0x0000ffffffff0000 ^ 0x0 = 0x0000ffffffff0000: 0000000000000000 <foo>: 0: 9d e3 bf 50 save %sp, -176, %sp 4: 01 00 00 00 nop 8: 90 10 00 18 mov %i0, %o0 c: 13 3f ff ff sethi %hi(0xfffffc00), %o1 10: 92 12 63 ff or %o1, 0x3ff, %o1 ! ffffffff <foo+0xffffffff> 14: 93 2a 70 10 sllx %o1, 0x10, %o1 18: 15 3f ff ff sethi %hi(0xfffffc00), %o2 1c: 94 12 a3 ff or %o2, 0x3ff, %o2 ! ffffffff <foo+0xffffffff> 20: 95 2a b0 10 sllx %o2, 0x10, %o2 24: 92 1a 60 00 xor %o1, 0, %o1 28: 12 e2 40 8a cxbe %o1, %o2, 38 <foo+0x38> 2c: 9a 10 20 02 mov 2, %o5 30: 10 60 00 03 b,pn %xcc, 3c <foo+0x3c> 34: 01 00 00 00 nop 38: 9a 10 20 01 mov 1, %o5 ! 1 <foo+0x1> 3c: 81 c7 e0 08 ret 40: 91 eb 40 00 restore %o5, %g0, %o0 Signed-off-by:David S. Miller <davem@davemloft.net>
-
- 24 Apr, 2017 22 commits
-
-
David S. Miller authored
cbcond combines a compare with a branch into a single instruction. The limitations are: 1) Only newer chips support it 2) For immediate compares we are limited to 5-bit signed immediate values 3) The branch displacement is limited to 10-bit signed 4) We cannot use it for JSET Also, cbcond (unlike all other sparc control transfers) lacks a delay slot. Currently we don't have a useful instruction we can push into the delay slot of normal branches. So using cbcond pretty much always increases code density, and is therefore a win. Signed-off-by: -
David S. Miller authored
Alexander Alemayhu says: ==================== Misc BPF cleanup while looking into making the Makefile in samples/bpf better handle O= I saw several warnings when running `make clean && make samples/bpf/`. This series reduces those warnings. ==================== Signed-off-by: -
Alexander Alemayhu authored
Fixes the following warning samples/bpf/test_lru_dist.c:28:0: warning: "offsetof" redefined #define offsetof(TYPE, MEMBER) ((size_t)&((TYPE *)0)->MEMBER) In file included from ./tools/lib/bpf/bpf.h:25:0, from samples/bpf/libbpf.h:5, from samples/bpf/test_lru_dist.c:24: /usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:417:0: note: this is the location of the previous definition #define offsetof(TYPE, MEMBER) __builtin_offsetof (TYPE, MEMBER) Signed-off-by:Alexander Alemayhu <alexander@alemayhu.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Alexander Alemayhu authored
Fixes the following warning samples/bpf/cookie_uid_helper_example.c: At top level: samples/bpf/cookie_uid_helper_example.c:276:6: warning: no previous prototype for ‘finish’ [-Wmissing-prototypes] void finish(int ret) ^~~~~~ HOSTLD samples/bpf/per_socket_stats_example Signed-off-by: -
Alexander Alemayhu authored
I was initially going to remove '-Wno-address-of-packed-member' because I thought it was not supposed to be there but Daniel suggested using '-Wno-unknown-warning-option'. This silences several warnings similiar to the one below warning: unknown warning option '-Wno-address-of-packed-member' [-Wunknown-warning-option] 1 warning generated. clang -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/6.3.1/include -I./arch/x86/include -I./arch/x86/include/generated/uapi -I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h \ -D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \ -Wno-compare-distinct-pointer-types \ -Wno-gnu-variable-sized-type-not-at-end \ -Wno-address-of-packed-member -Wno-tautological-compare \ -O2 -emit-llvm -c samples/bpf/xdp_tx_iptunnel_kern.c -o -| llc -march=bpf -filetype=obj -o samples/bpf/xdp_tx_iptunnel_kern.o $ clang --version clang version 3.9.1 (tags/RELEASE_391/final) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /usr/bin Signed-off-by: -
Daniel Borkmann authored
Now that also the last in-tree user of the xdp_adjust_head bit has been removed, we can remove the flag from struct bpf_prog altogether. This, at the same time, also makes sure that any future driver for XDP comes with bpf_xdp_adjust_head() support right away. A rejection based on this flag would also mean that tail calls couldn't be used with such driver as per c2002f98 ("bpf: fix checking xdp_adjust_head on tail calls") fix, thus lets not allow for it in the first place. Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Pan Bian authored
Function pci_find_ext_capability() may return 0, which is an invalid address. In function qlcnic_sriov_virtid_fn(), its return value is used without validation. This may result in invalid memory access bugs. This patch fixes the bug. Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
Pan Bian authored
In function pc300_pci_init_one(), on the ioremap error path, function pc300_pci_remove_one() is called to free the allocated memory. However, the path is not terminated, and the freed memory will be used later, resulting in use-after-free bugs. This path fixes the bug. Signed-off-by:
-
Pan Bian authored
Function nlmsg_new() will return a NULL pointer if there is no enough memory, and its return value should be checked before it is used. However, in function tipc_nl_node_get_monitor(), the validation of the return value of function nlmsg_new() is missed. This patch fixes the bug. Signed-off-by:
-
Pan Bian authored
Function nla_nest_start() may return a NULL pointer on error. However, in function lwtunnel_fill_encap(), the return value of nla_nest_start() is not validated before it is used. This patch checks the return value of nla_nest_start() against NULL. Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: DMA flags, adjust head and fixes This series takes advantage of Alex's DMA_ATTR_SKIP_CPU_SYNC to make XDP packet modifications "correct" from DMA API point of view. It also allows us to parse the metadata before we run XDP at no additional DMA sync cost. That way we can get rid of the metadata memcpy, and remove the last upstream user of bpf_prog->xdp_adjust_head. David's patch adds a way to read capabilities from the management firmware. There are also two net-next fixes. Patch 4 which fixes what seems to be a result of a botched rebase on my part. Patch 5 corrects locking when state of ethernet ports is being refreshed. v3: move the sync from alloc func to the actual give to hw func v2: sync rx buffers before giving them to the card (Alex) ==================== Signed-off-by: -
Jakub Kicinski authored
The code refreshing the eth port state was trying to update state of all ports of the card. Unfortunately to safely walk the port list we would have to hold the port lock, which we can't due to lock ordering constraints against rtnl. Make the per-port sync refresh and async refresh of all ports completely separate routines. Fixes: 172f638c ("nfp: add port state refresh") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
XDP headroom should not be included in free list buffer size. Fixes: 6fe0c3b4 ("nfp: add support for xdp_adjust_head()") Signed-off-by:
-
David Brunecz authored
Retrieve identifying information from the NSP. For now it only contains versions of firmware subcomponents. Signed-off-by:
David Brunecz <david.brunecz@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
Calling memcpy to shift metadata out of the way for XDP to run seems like an overkill. The most common metadata contents are 8 bytes containing type and flow hash. Simply parse the metadata before we run XDP. Signed-off-by:
-
Jakub Kicinski authored
DMA unmap may destroy changes CPU made to the buffer. To make XDP run correctly on non-x86 platforms we should use the DMA_ATTR_SKIP_CPU_SYNC attribute. Thanks to using the attribute we can now push the sync operation to the common code path from XDP handler. A little bit of variable name reshuffling is required to bring the code back to readable state. Signed-off-by:
-
David S. Miller authored
Benjamin LaHaise says: ==================== flower: add MPLS matching support This patch series adds support for parsing MPLS flows in the flow dissector and the flower classifier. Each of the MPLS TTL, BOS, TC and Label fields can be used for matching. v2: incorporate style feedback, move #defines to linux/include/mpls.h Note: this omits Jiri's request to remove tabs between the type and field names in struct declarations. This would be inconsistent with numerous other struct definitions. ==================== Signed-off-by: -
Benjamin LaHaise authored
Add support to the tc flower classifier to match based on fields in MPLS labels (TTL, Bottom of Stack, TC field, Label). Signed-off-by:
Benjamin LaHaise <benjamin.lahaise@netronome.com> Signed-off-by:
Benjamin LaHaise <bcrl@kvack.org> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Benjamin LaHaise authored
Add support for parsing MPLS flows to the flow dissector in preparation for adding MPLS match support to cls_flower. Signed-off-by:
-
David S. Miller authored
Wei Wang says: ==================== net/tcp_fastopen: Fix for various TFO firewall issues Currently there are still some firewall issues in the middlebox which make the middlebox drop packets silently for TFO sockets. This kind of issue is hard to be detected by the end client. This patch series tries to detect such issues in the kernel and disable TFO temporarily. More details about the issues and the fixes are included in the following patches. ==================== Signed-off-by: -
Wei Wang authored
Christoph Paasch from Apple found another firewall issue for TFO: After successful 3WHS using TFO, server and client starts to exchange data. Afterwards, a 10s idle time occurs on this connection. After that, firewall starts to drop every packet on this connection. The fix for this issue is to extend existing firewall blackhole detection logic in tcp_write_timeout() by removing the mss check. Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Wei Wang authored
This counter records the number of times the firewall blackhole issue is detected and active TFO is disabled. Signed-off-by:
-
