Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80611Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains updates for your net-next tree,
they are:

1) Use kvfree() helper function from x_tables, from Eric Dumazet.

2) Remove extra timer from the conntrack ecache extension, use a
   workqueue instead to redeliver lost events to userspace instead,
   from Florian Westphal.

3) Removal of the ulog targets for ebtables and iptables. The nflog
   infrastructure superseded this almost 9 years ago, time to get rid
   of this code.

4) Replace the list of loggers by an array now that we can only have
   two possible non-overlapping logger flavours, ie. kernel ring buffer
   and netlink logging.

5) Move Eric Dumazet's log buffer code to nf_log to reuse it from
   all of the supported per-family loggers.

6) Consolidate nf_log_packet() as an unified interface for packet logging.
   After this patch, if the struct nf_loginfo is available, it explicitly
   selects the logger that is used.

7) Move ip and ip6 logging code from xt_LOG to the corresponding
   per-family loggers. Thus, x_tables and nf_tables share the same code
   for packet logging.

8) Add generic ARP packet logger, which is used by nf_tables. The
   format aims to be consistent with the output of xt_LOG.

9) Add generic bridge packet logger. Again, this is used by nf_tables
   and it routes the packets to the real family loggers. As a result,
   we get consistent logging format for the bridge family. The ebt_log
   logging code has been intentionally left in place not to break
   backward compatibility since the logging output differs from xt_LOG.

10) Update nft_log to explicitly request the required family logger when
    needed.

11) Finish nft_log so it supports arp, ip, ip6, bridge and inet families.
    Allowing selection between netlink and kernel buffer ring logging.

12) Several fixes coming after the netfilter core logging changes spotted
    by robots.

13) Use IS_ENABLED() macros whenever possible in the netfilter tree,
    from Duan Jiong.

14) Removal of a couple of unnecessary branch before kfree, from Fabian
    Frederick.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently it's done silently (from the kernel part), and thus it might be
hard to track the renames from logs.

Add a simple netdev_info() to notify the rename, but only in case the
previous name was valid.

CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Vlad Yasevich <vyasevic@redhat.com>
CC: stephen hemminger <stephen@networkplumber.org>
CC: Jerry Chu <hkchu@google.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
CC: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Veaceslav Falico says:

====================
net: print net_device name/state more often

Currently we use net_device->name only if it's the NETREG_REGISTERED
reg_state, otherwise we return "(unregistered device)".

However, we always populate net_device->name on creation, so it's always
available to us for use. The only caveat is that we might have a name like
"eth%d", in which case we cannot use it as it might change in the future.

Also, the net_device might not be NETREG_UNREGISTERED when the function is
called (_UNINITIALIZED, _UNREGISTERING, _RELEASED, _DUMMY), so it's
misleading.

So, a better way would be to always return the dev->name in netdev_name(),
unless it's in the form of "eth%d" or it's empty, then return
"unnamed net_device". This way we'll always return the name in
NETREG_REGISTERED reg_state, and also return it in other states, when
possible.

Also, to be more verbose on non-NETREG_REGISTERED states, add a function
netdev_reg_state(), which returns a string describing the state, and use it
in netdev_printk()-related functions. If the dev is in NETREG_REGISTERED
state then a void string is regurned and, thus, nothing changes.

After these two patches we'll have the same behaviour in the usual cases,
and more verbose in non-standardad/buggy ones.

v2->v3:
Correct the string for _UNINITIALIZED and warn on a bad reg_state,
per Joe Perches's comments.

v1->v2:
As Tom Gundersen suggested, there might be a case when we have an empty
string as a name for a device, so account this also and return "unnamed
device" for that case too.
====================
Signed-off-by: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This way we'll always know in what status the device is, unless it's
running normally (i.e. NETDEV_REGISTERED).

Also, emit a warning once in case of a bad reg_state.

CC: "David S. Miller" <davem@davemloft.net>
CC: Jason Baron <jbaron@akamai.com>
CC: Eric Dumazet <edumazet@google.com>
CC: Vlad Yasevich <vyasevic@redhat.com>
CC: stephen hemminger <stephen@networkplumber.org>
CC: Jerry Chu <hkchu@google.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
CC: Joe Perches <joe@perches.com>
Signed-off-by: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev_name() returns dev->name only when the net_device is in
NETREG_REGISTERED state.

However, dev->name is always populated on creation, so we can easily use
it.

There are two cases when there's no real name - when it's an empty string
or when the name is in form of "eth%d", then netdev_name() returns "unnamed
net_device".

CC: "David S. Miller" <davem@davemloft.net>
CC: Tom Gundersen <teg@jklm.no>
Signed-off-by: Veaceslav Falico <vfalico@gmail.com>
Acked-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently we're limited by a constant level of vlan nestings, and fail to
find anything beyound that level (currently 2).

To fix this - remove the limit of nestings when going through device tree,
and when the end device is found - allocate the needed amount of vlan tags
and return them, instead of found/not found.

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We modify mirred action (m->tcfm_dev) in netdev event, we need to
prevent on-going mirred actions from reading freed m->tcfm_dev.
So we need to acquire this spin lock.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes: fc8d0590 ("libcxgbi: Add ipv6 api to driver")
Fixes: 759a0cc5 ("cxgb4i: Add ipv6 code to driver, call into libcxgbi ipv6
api")
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixed error introduced in commit id 7730b4c7 (" cxgb4/iw_cxgb4: work request
logging feature") while compiling on 32 bit architecture reported by kbuild.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement per channel software TX and RX packet counters
accessed as ethtool statistics.

This allows confirmation with MAC statistics.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sathya Perla says:

====================
be2net: patch set

Patches 1 to 6 address issues with return values of some ndo/ethtool
driver methods. In error scenarios, either an inappropriate error or
a +ve return value (where the stack expects a -ve value) was being returned.

Patch 7 updates description strings for certain UE bits.

Patch 8 cleans up (reduces) argument passing for a few routines in be_cmds.c.

Patch 9 removes some unused code (unused definitions.)

Patch 10 updates NULL check in the driver to a consistent "if (!foo)" style.

Patchs 11 to 13 fix a few minor issues with the earlier patch bec84e6b
("create optimal number of queues on SR-IOV config"):
	- patch 11 fixes BEx_get_resources() code to use be_max_vfs() macro
	- patch 12 skips SR-IOV config code for BE2 that doesn't support SRIOV
	- patch 13 uses adapter->flags to track SRIOV enabled state

Patch 14 updates the driver version.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver so far used adapter->num_vfs value to check if SR-IOV is enabled
or not. But, the patch bec84e6b("create optimal number of queues on SR-IOV
config") changed this logic. The adapter->num_vfs value is validated and set
much before SR-IOV is enabled. So, we now use an explicit flag to track
SR-IOV enabled state.
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As SRIOV is not supported on BE2 chip, avoid calling be_get/set_sriov_config()
for BE2 chip.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

max-vfs value must be accessed via the macro be_max_vfs(adapter).
The earlier patch "create optimal number of queues on SR-IOV config"
by mistake, did not use this macro. This patch fixes it.

fixes: bec84e6b ("be2net: create optimal number of queues on SR-IOV config")
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace "if (foo == NULL)" statements with "if (!foo)" to be consistent
across the driver.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A pointer to adapter struct is passed anyway to all of the FW-cmd routines
in be_cmds.c. For routines which query data from FW, the adapter pointer
is enough to return the queried fields.
There is no need to separately pass pointers to individual members of
the adapter structure. This patch fixes this for be_cmd_get_fw_ver()
and be_cmd_get_fw_cfg() routines.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch updates some description strings for BEx/Skyhawk-R
UE (unrecoverable error) status register bits. The appropriate strings
are logged when a UE is detected in the adapter.
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The netlink layer expects a -ve status value to be returned when a driver
ndo method encounters an error. The driver was directly passing the
error status returned by FW (a positive value) to the stack.
This patch fixes this by returning -EIO status when a FW-cmd reports an error.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ethtool expects a -ve status value to be returned when a driver method
encounters an error. The driver was directly passing the
error status returned by FW (a positive value) to ethtool.
This patch fixes this by returning -EIO status in cases where FW returns
an error.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the FW stops responding with completions, return -ETIMEDOUT error
(instead of -1) to the stack.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For FW download ethtool cmd, if the user provides an FW-image incompatible
with the chip, return -EINVAL instead of -1.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Updating VF's tx-rate and FW-download are not allowed when the interface is
down. In such cases return -ENETDOWN to the stack.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently we might arrive to bond_net_exit() with some bonds left (that
were created while the module is unloading). We take care of that by
destroying sysfs (the last possibility to add new bonds) and then
destroying all the remaining bonds.

However, we destroy the /proc/net/bonding directory before destroying those
last bonds, and get a warning that we're trying to destroy a non-empty
proc directory (containing /proc/net/bonding/bondX).

Fix this by moving bond_destroy_proc_dir() after all the bonds are
destroyed, so that we're sure that no bonds exist.

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As it's always called with RTNL held, via dev_set_allmulti/promiscuity.
Also, remove the wrong comment.

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Anish Bhatt says:

====================
cxgb4i: Add ipv6 support

   The following patchset add ipv6 support for the cxgb4i(iscsi) driver.

Patch 1 moves a define from the iw_cxgb4 to cxgb4 to prevent code duplication,
 as it is used by cxgb4i and iw_cxgb4 both.
Patch 2 exports symbols needed by cxgb4i for ipv6 support from cxgb4.
Patch 3 & 4 deal with actual ipv6 code in libcxgbi/cxgb4i.

Submitting to net-next as changes were needed in cxgb4/iw_cxgb4, and submitting
to scsi separately would break compilation, cc-ing scsi & rdma.

v2 : Cleanup macro that prints ip addresses by using %pIS in patch 3
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: Manoj Malviya <manojmalviya@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: Manoj Malviya <manojmalviya@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This define is used by cxgb4i and iw_cxgb4, moving to avoid code duplication
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Document the Layer 2 hash factors with packet type ID field.

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: David S. Miller <davem@davemloft.net>
CC: Pan Jiafei <Jiafei.Pan@freescale.com>
Signed-off-by: Jianhua Xie <jianhua.xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>