Ethtool manual stated that the tx-timer is the "the amount of time the
device should stay in idle mode prior to asserting its Tx LPI". The
previous implementation for "ethtool --set-eee tx-timer" sets the LPI TW
timer duration which is not correct. Hence, this patch fixes the
"ethtool --set-eee tx-timer" to configure the EEE LPI timer.

The LPI TW Timer will be using the defined default value instead of
"ethtool --set-eee tx-timer" which follows the EEE LS timer implementation.

Changelog V2
*Not removing/modifying the eee_timer.
*EEE LPI timer can be configured through ethtool and also the eee_timer
module param.
*EEE TW Timer will be configured with default value only, not able to be
configured through ethtool or module param. This follows the implementation
of the EEE LS Timer.

Fixes: d765955d ("stmmac: add the Energy Efficient Ethernet support")
Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

From: Saeed Mahameed <saeedm@nvidia.com>

====================
This series introduces some fixes to mlx5 driver.

v1->v2:
 - Patch #1 Don't return while mutex is held. (Dave)

v2->v3:
 - Drop patch #1, will consider a better approach (Jakub)
 - use cpu_relax() instead of cond_resched() (Jakub)
 - while(i--) to reveres a loop (Jakub)
 - Drop old mellanox email sign-off and change the committer email
   (Jakub)

Please pull and let me know if there is any problem.

For -stable v4.15
 ('net/mlx5e: Fix VLAN cleanup flow')
 ('net/mlx5e: Fix VLAN create flow')

For -stable v4.16
 ('net/mlx5: Fix request_irqs error flow')

For -stable v5.4
 ('net/mlx5e: Add resiliency in Striding RQ mode for packets larger than MTU')
 ('net/mlx5: Avoid possible free of command entry while timeout comp handler')

For -stable v5.7
 ('net/mlx5e: Fix return status when setting unsupported FEC mode')

For -stable v5.8
 ('net/mlx5e: Fix race condition on nhe->n pointer in neigh update')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If a syn-cookies request socket don't pass MPTCP-level
validation done in syn_recv_sock(), we need to release
it immediately, or it will be leaked.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/89
Fixes: 9466a1cc ("mptcp: enable JOIN requests even if cookies are in use")
Reported-and-tested-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Coly Li says:

====================
Introduce sendpage_ok() to detect misused sendpage in network related drivers

As Sagi Grimberg suggested, the original fix is refind to a more common
inline routine:
    static inline bool sendpage_ok(struct page *page)
    {
        return  (!PageSlab(page) && page_count(page) >= 1);
    }
If sendpage_ok() returns true, the checking page can be handled by the
concrete zero-copy sendpage method in network layer.

The v10 series has 7 patches, fixes a WARN_ONCE() usage from v9 series,
- The 1st patch in this series introduces sendpage_ok() in header file
  include/linux/net.h.
- The 2nd patch adds WARN_ONCE() for improper zero-copy send in
  kernel_sendpage().
- The 3rd patch fixes the page checking issue in nvme-over-tcp driver.
- The 4th patch adds page_count check by using sendpage_ok() in
  do_tcp_sendpages() as Eric Dumazet suggested.
- The 5th and 6th patches just replace existing open coded checks with
  the inline sendpage_ok() routine.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In libceph, ceph_tcp_sendpage() does the following checks before handle
the page by network layer's zero copy sendpage method,
	if (page_count(page) >= 1 && !PageSlab(page))

This check is exactly what sendpage_ok() does. This patch replace the
open coded checks by sendpage_ok() as a code cleanup.
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In iscsci driver, iscsi_tcp_segment_map() uses the following code to
check whether the page should or not be handled by sendpage:
    if (!recv && page_count(sg_page(sg)) >= 1 && !PageSlab(sg_page(sg)))

The "page_count(sg_page(sg)) >= 1 && !PageSlab(sg_page(sg)" part is to
make sure the page can be sent to network layer's zero copy path. This
part is exactly what sendpage_ok() does.

This patch uses  use sendpage_ok() in iscsi_tcp_segment_map() to replace
the original open coded checks.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Cong Wang <amwang@redhat.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Chris Leech <cleech@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

In _drbd_send_page() a page is checked by following code before sending
it by kernel_sendpage(),
        (page_count(page) < 1) || PageSlab(page)
If the check is true, this page won't be send by kernel_sendpage() and
handled by sock_no_sendpage().

This kind of check is exactly what macro sendpage_ok() does, which is
introduced into include/linux/net.h to solve a similar send page issue
in nvme-tcp code.

This patch uses macro sendpage_ok() to replace the open coded checks to
page type and refcount in _drbd_send_page(), as a code cleanup.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit a10674bf ("tcp: detecting the misuse of .sendpage for Slab
objects") adds the checks for Slab pages, but the pages don't have
page_count are still missing from the check.

Network layer's sendpage method is not designed to send page_count 0
pages neither, therefore both PageSlab() and page_count() should be
both checked for the sending page. This is exactly what sendpage_ok()
does.

This patch uses sendpage_ok() in do_tcp_sendpages() to detect misused
.sendpage, to make the code more robust.

Fixes: a10674bf ("tcp: detecting the misuse of .sendpage for Slab objects")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently nvme_tcp_try_send_data() doesn't use kernel_sendpage() to
send slab pages. But for pages allocated by __get_free_pages() without
__GFP_COMP, which also have refcount as 0, they are still sent by
kernel_sendpage() to remote end, this is problematic.

The new introduced helper sendpage_ok() checks both PageSlab tag and
page_count counter, and returns true if the checking page is OK to be
sent by kernel_sendpage().

This patch fixes the page checking issue of nvme_tcp_try_send_data()
with sendpage_ok(). If sendpage_ok() returns true, send this page by
kernel_sendpage(), otherwise use sock_no_sendpage to handle this page.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jan Kara <jack@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Vlastimil Babka <vbabka@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

If a page sent into kernel_sendpage() is a slab page or it doesn't have
ref_count, this page is improper to send by the zero copy sendpage()
method. Otherwise such page might be unexpected released in network code
path and causes impredictable panic due to kernel memory management data
structure corruption.

This path adds a WARN_ON() on the sending page before sends it into the
concrete zero-copy sendpage() method, if the page is improper for the
zero-copy sendpage() method, a warning message can be observed before
the consequential unpredictable kernel panic.

This patch does not change existing kernel_sendpage() behavior for the
improper page zero-copy send, it just provides hint warning message for
following potential panic due the kernel memory heap corruption.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Cong Wang <amwang@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The original problem was from nvme-over-tcp code, who mistakenly uses
kernel_sendpage() to send pages allocated by __get_free_pages() without
__GFP_COMP flag. Such pages don't have refcount (page_count is 0) on
tail pages, sending them by kernel_sendpage() may trigger a kernel panic
from a corrupted kernel heap, because these pages are incorrectly freed
in network stack as page_count 0 pages.

This patch introduces a helper sendpage_ok(), it returns true if the
checking page,
- is not slab page: PageSlab(page) is false.
- has page refcount: page_count(page) is not zero

All drivers who want to send page to remote end by kernel_sendpage()
may use this helper to check whether the page is OK. If the helper does
not return true, the driver should try other non sendpage method (e.g.
sock_no_sendpage()) to handle the page.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jan Kara <jack@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Vlastimil Babka <vbabka@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

v2:

If reading the MAC address from eeprom fail don't throw an error, use randomly
generated MAC instead.  Either way the adapter will soldier on and the return
type of set_ethernet_addr() can be reverted to void.

v1:

Fix a bug in set_ethernet_addr() which does not take into account possible
errors (or partial reads) returned by its helpers.  This can potentially lead to
writing random data into device's MAC address registers.
Signed-off-by: Petko Manolov <petko.manolov@konsulko.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As warned by "make htmldocs", there are two new struct elements
that aren't documented:

	../include/linux/netdevice.h:2159: warning: Function parameter or member 'unlink_list' not described in 'net_device'
	../include/linux/netdevice.h:2159: warning: Function parameter or member 'nested_level' not described in 'net_device'

Fixes: 1fc70edb ("net: core: add nested_level variable in net_device")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If userspace doesn't complete the policy dump, we leak the
allocated state. Fix this.

Fixes: d07dcf9a ("netlink: add infrastructure to expose policies to userspace")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current neigh update event handler implementation takes reference to
neighbour structure, assigns it to nhe->n, tries to schedule workqueue task
and releases the reference if task was already enqueued. This results
potentially overwriting existing nhe->n pointer with another neighbour
instance, which causes double release of the instance (once in neigh update
handler that failed to enqueue to workqueue and another one in neigh update
workqueue task that processes updated nhe->n pointer instead of original
one):

[ 3376.512806] ------------[ cut here ]------------
[ 3376.513534] refcount_t: underflow; use-after-free.
[ 3376.521213] Modules linked in: act_skbedit act_mirred act_tunnel_key vxlan ip6_udp_tunnel udp_tunnel nfnetlink act_gact cls_flower sch_ingress openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 mlx5_ib mlx5_core mlxfw pci_hyperv_intf ptp pps_core nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd
 grace fscache ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp rpcrdma rdma_ucm ib_umad ib_ipoib ib_iser rdma_cm ib_cm iw_cm rfkill ib_uverbs ib_core sunrpc kvm_intel kvm iTCO_wdt iTCO_vendor_support virtio_net irqbypass net_failover crc32_pclmul lpc_ich i2c_i801 failover pcspkr i2c_smbus mfd_core ghash_clmulni_intel sch_fq_codel drm i2c
_core ip_tables crc32c_intel serio_raw [last unloaded: mlxfw]
[ 3376.529468] CPU: 8 PID: 22756 Comm: kworker/u20:5 Not tainted 5.9.0-rc5+ #6
[ 3376.530399] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 3376.531975] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core]
[ 3376.532820] RIP: 0010:refcount_warn_saturate+0xd8/0xe0
[ 3376.533589] Code: ff 48 c7 c7 e0 b8 27 82 c6 05 0b b6 09 01 01 e8 94 93 c1 ff 0f 0b c3 48 c7 c7 88 b8 27 82 c6 05 f7 b5 09 01 01 e8 7e 93 c1 ff <0f> 0b c3 0f 1f 44 00 00 8b 07 3d 00 00 00 c0 74 12 83 f8 01 74 13
[ 3376.536017] RSP: 0018:ffffc90002a97e30 EFLAGS: 00010286
[ 3376.536793] RAX: 0000000000000000 RBX: ffff8882de30d648 RCX: 0000000000000000
[ 3376.537718] RDX: ffff8882f5c28f20 RSI: ffff8882f5c18e40 RDI: ffff8882f5c18e40
[ 3376.538654] RBP: ffff8882cdf56c00 R08: 000000000000c580 R09: 0000000000001a4d
[ 3376.539582] R10: 0000000000000731 R11: ffffc90002a97ccd R12: 0000000000000000
[ 3376.540519] R13: ffff8882de30d600 R14: ffff8882de30d640 R15: ffff88821e000900
[ 3376.541444] FS:  0000000000000000(0000) GS:ffff8882f5c00000(0000) knlGS:0000000000000000
[ 3376.542732] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3376.543545] CR2: 0000556e5504b248 CR3: 00000002c6f10005 CR4: 0000000000770ee0
[ 3376.544483] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3376.545419] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 3376.546344] PKRU: 55555554
[ 3376.546911] Call Trace:
[ 3376.547479]  mlx5e_rep_neigh_update.cold+0x33/0xe2 [mlx5_core]
[ 3376.548299]  process_one_work+0x1d8/0x390
[ 3376.548977]  worker_thread+0x4d/0x3e0
[ 3376.549631]  ? rescuer_thread+0x3e0/0x3e0
[ 3376.550295]  kthread+0x118/0x130
[ 3376.550914]  ? kthread_create_worker_on_cpu+0x70/0x70
[ 3376.551675]  ret_from_fork+0x1f/0x30
[ 3376.552312] ---[ end trace d84e8f46d2a77eec ]---

Fix the bug by moving work_struct to dedicated dynamically-allocated
structure. This enabled every event handler to work on its own private
neighbour pointer and removes the need for handling the case when task is
already enqueued.

Fixes: 232c0013 ("net/mlx5e: Add support to neighbour update flow")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When interface is attached while in promiscuous mode and with VLAN
filtering turned off, both configurations are not respected and VLAN
filtering is performed.
There are 2 flows which add the any-vid rules during interface attach:
VLAN creation table and set rx mode. Each is relaying on the other to
add any-vid rules, eventually non of them does.

Fix this by adding any-vid rules on VLAN creation regardless of
promiscuous mode.

Fixes: 9df30601 ("net/mlx5e: Restore vlan filter after seamless reset")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Prior to this patch unloading an interface in promiscuous mode with RX
VLAN filtering feature turned off - resulted in a warning. This is due
to a wrong condition in the VLAN rules cleanup flow, which left the
any-vid rules in the VLAN steering table. These rules prevented
destroying the flow group and the flow table.

The any-vid rules are removed in 2 flows, but none of them remove it in
case both promiscuous is set and VLAN filtering is off. Fix the issue by
changing the condition of the VLAN table cleanup flow to clean also in
case of promiscuous mode.

mlx5_core 0000:00:08.0: mlx5_destroy_flow_group:2123:(pid 28729): Flow group 20 wasn't destroyed, refcount > 1
mlx5_core 0000:00:08.0: mlx5_destroy_flow_group:2123:(pid 28729): Flow group 19 wasn't destroyed, refcount > 1
mlx5_core 0000:00:08.0: mlx5_destroy_flow_table:2112:(pid 28729): Flow table 262149 wasn't destroyed, refcount > 1
...
...
------------[ cut here ]------------
FW pages counter is 11560 after reclaiming all pages
WARNING: CPU: 1 PID: 28729 at
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:660
mlx5_reclaim_startup_pages+0x178/0x230 [mlx5_core]
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
  mlx5_function_teardown+0x2f/0x90 [mlx5_core]
  mlx5_unload_one+0x71/0x110 [mlx5_core]
  remove_one+0x44/0x80 [mlx5_core]
  pci_device_remove+0x3e/0xc0
  device_release_driver_internal+0xfb/0x1c0
  device_release_driver+0x12/0x20
  pci_stop_bus_device+0x68/0x90
  pci_stop_and_remove_bus_device+0x12/0x20
  hv_eject_device_work+0x6f/0x170 [pci_hyperv]
  ? __schedule+0x349/0x790
  process_one_work+0x206/0x400
  worker_thread+0x34/0x3f0
  ? process_one_work+0x400/0x400
  kthread+0x126/0x140
  ? kthread_park+0x90/0x90
  ret_from_fork+0x22/0x30
   ---[ end trace 6283bde8d26170dc ]---

Fixes: 9df30601 ("net/mlx5e: Restore vlan filter after seamless reset")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Verify the configured FEC mode is supported by at least a single link
mode before applying the command. Otherwise fail the command and return
"Operation not supported".
Prior to this patch, the command was successful, yet it falsely set all
link modes to FEC auto mode - like configuring FEC mode to auto. Auto
mode is the default configuration if a link mode doesn't support the
configured FEC mode.

Fixes: b5ede32d ("net/mlx5e: Add support for FEC modes based on 50G per lane links")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Declare GRE offload support with respect to the inner protocol. Add a
list of supported inner protocols on which the driver can offload
checksum and GSO. For other protocols, inform the stack to do the needed
operations. There is no noticeable impact on GRE performance.

Fixes: 27299841 ("net/mlx5e: Support TSO and TX checksum offloads for GRE tunnels")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cited commit introduced the following coverity issue at function
mlx5_tc_ct_rule_to_tuple_nat:
- Memory - corruptions (OVERRUN)
  Overrunning array "tuple->ip.src_v6.in6_u.u6_addr32" of 4 4-byte
  elements at element index 7 (byte offset 31) using index
  "ip6_offset" (which evaluates to 7).

In case of IPv6 destination address rewrite, ip6_offset values are
between 4 to 7, which will cause memory overrun of array
"tuple->ip.src_v6.in6_u.u6_addr32" to array
"tuple->ip.dst_v6.in6_u.u6_addr32".

Fixed by writing the value directly to array
"tuple->ip.dst_v6.in6_u.u6_addr32" in case ip6_offset values are
between 4 to 7.

Fixes: bc562be9 ("net/mlx5e: CT: Save ct entries tuples in hashtables")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Prior to this fix, in Striding RQ mode the driver was vulnerable when
receiving packets in the range (stride size - headroom, stride size].
Where stride size is calculated by mtu+headroom+tailroom aligned to the
closest power of 2.
Usually, this filtering is performed by the HW, except for a few cases:
- Between 2 VFs over the same PF with different MTUs
- On bluefield, when the host physical function sets a larger MTU than
  the ARM has configured on its representor and uplink representor.

When the HW filtering is not present, packets that are larger than MTU
might be harmful for the RQ's integrity, in the following impacts:
1) Overflow from one WQE to the next, causing a memory corruption that
in most cases is unharmful: as the write happens to the headroom of next
packet, which will be overwritten by build_skb(). In very rare cases,
high stress/load, this is harmful. When the next WQE is not yet reposted
and points to existing SKB head.
2) Each oversize packet overflows to the headroom of the next WQE. On
the last WQE of the WQ, where addresses wrap-around, the address of the
remainder headroom does not belong to the next WQE, but it is out of the
memory region range. This results in a HW CQE error that moves the RQ
into an error state.

Solution:
Add a page buffer at the end of each WQE to absorb the leak. Actually
the maximal overflow size is headroom but since all memory units must be
of the same size, we use page size to comply with UMR WQEs. The increase
in memory consumption is of a single page per RQ. Initialize the mkey
with all MTTs pointing to a default page. When the channels are
activated, UMR WQEs will redirect the RX WQEs to the actual memory from
the RQ's pool, while the overflow MTTs remain mapped to the default page.

Fixes: 73281b78 ("net/mlx5e: Derive Striding RQ size from MTU")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Increase granularity of the error path to avoid unneeded free/release.
Fix the cleanup to be symmetric to the order of creation.

Fixes: 0ddf5432 ("xdp/mlx5: setup xdp_rxq_info")
Fixes: 422d4c40 ("net/mlx5e: RX, Split WQ objects for different RQ types")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Fix error flow handling in request_irqs which try to free irq
that we failed to request.
It fixes the below trace.

WARNING: CPU: 1 PID: 7587 at kernel/irq/manage.c:1684 free_irq+0x4d/0x60
CPU: 1 PID: 7587 Comm: bash Tainted: G        W  OE    4.15.15-1.el7MELLANOXsmp-x86_64 #1
Hardware name: Advantech SKY-6200/SKY-6200, BIOS F2.00 08/06/2020
RIP: 0010:free_irq+0x4d/0x60
RSP: 0018:ffffc9000ef47af0 EFLAGS: 00010282
RAX: ffff88001476ae00 RBX: 0000000000000655 RCX: 0000000000000000
RDX: ffff88001476ae00 RSI: ffffc9000ef47ab8 RDI: ffff8800398bb478
RBP: ffff88001476a838 R08: ffff88001476ae00 R09: 000000000000156d
R10: 0000000000000000 R11: 0000000000000004 R12: ffff88001476a838
R13: 0000000000000006 R14: ffff88001476a888 R15: 00000000ffffffe4
FS:  00007efeadd32740(0000) GS:ffff88047fc40000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc9cc010008 CR3: 00000001a2380004 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 mlx5_irq_table_create+0x38d/0x400 [mlx5_core]
 ? atomic_notifier_chain_register+0x50/0x60
 mlx5_load_one+0x7ee/0x1130 [mlx5_core]
 init_one+0x4c9/0x650 [mlx5_core]
 pci_device_probe+0xb8/0x120
 driver_probe_device+0x2a1/0x470
 ? driver_allows_async_probing+0x30/0x30
 bus_for_each_drv+0x54/0x80
 __device_attach+0xa3/0x100
 pci_bus_add_device+0x4a/0x90
 pci_iov_add_virtfn+0x2dc/0x2f0
 pci_enable_sriov+0x32e/0x420
 mlx5_core_sriov_configure+0x61/0x1b0 [mlx5_core]
 ? kstrtoll+0x22/0x70
 num_vf_store+0x4b/0x70 [mlx5_core]
 kernfs_fop_write+0x102/0x180
 __vfs_write+0x26/0x140
 ? rcu_all_qs+0x5/0x80
 ? _cond_resched+0x15/0x30
 ? __sb_start_write+0x41/0x80
 vfs_write+0xad/0x1a0
 SyS_write+0x42/0x90
 do_syscall_64+0x60/0x110
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Fixes: 24163189 ("net/mlx5: Separate IRQ request/free from EQ life cycle")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

In case of pci is offline reclaim_pages_cmd() will still try to call
the FW to release FW pages, cmd_exec() in this case will return a silent
success without actually calling the FW.

This is wrong and will cause page leaks, what we should do is to detect
pci offline or command interface un-available before tying to access the
FW and manually release the FW pages in the driver.

In this patch we share the code to check for FW command interface
availability and we call it in sensitive places e.g. reclaim_pages_cmd().

Alternative fix:
 1. Remove MLX5_CMD_OP_MANAGE_PAGES form mlx5_internal_err_ret_value,
    command success simulation list.
 2. Always Release FW pages even if cmd_exec fails in reclaim_pages_cmd().
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

It is possible that new command entry index allocation will temporarily
fail. The new command holds the semaphore, so it means that a free entry
should be ready soon. Add one second retry mechanism before returning an
error.

Patch "net/mlx5: Avoid possible free of command entry while timeout comp
handler" increase the possibility to bump into this temporarily failure
as it delays the entry index release for non-callback commands.

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Once driver detects a command interface command timeout, it warns the
user and returns timeout error to the caller. In such case, the entry of
the command is not evacuated (because only real event interrupt is allowed
to clear command interface entry). If the HW event interrupt
of this entry will never arrive, this entry will be left unused forever.
Command interface entries are limited and eventually we can end up without
the ability to post a new command.

In addition, if driver will not consume the EQE of the lost interrupt and
rearm the EQ, no new interrupts will arrive for other commands.

Add a resiliency mechanism for manually polling the command EQ in case of
a command timeout. In case resiliency mechanism will find non-handled EQE,
it will consume it, and the command interface will be fully functional
again. Once the resiliency flow finished, wait another 5 seconds for the
command interface to complete for this command entry.

Define mlx5_cmd_eq_recover() to manage the cmd EQ polling resiliency flow.
Add an async EQ spinlock to avoid races between resiliency flows and real
interrupts that might run simultaneously.

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Upon command completion timeout, driver simulates a forced command
completion. In a rare case where real interrupt for that command arrives
simultaneously, it might release the command entry while the forced
handler might still access it.

Fix that by adding an entry refcount, to track current amount of allowed
handlers. Command entry to be released only when this refcount is
decremented to zero.

Command refcount is always initialized to one. For callback commands,
command completion handler is the symmetric flow to decrement it. For
non-callback commands, it is wait_func().

Before ringing the doorbell, increment the refcount for the real completion
handler. Once the real completion handler is called, it will decrement it.

For callback commands, once the delayed work is scheduled, increment the
refcount. Upon callback command completion handler, we will try to cancel
the timeout callback. In case of success, we need to decrement the callback
refcount as it will never run.

In addition, gather the entry index free and the entry free into a one
flow for all command types release.

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

As part of driver unload, it destroys the commands EQ (via FW command).
As the commands EQ is destroyed, FW will not generate EQEs for any command
that driver sends afterwards. Driver should poll for later commands status.

Driver commands mode metadata is updated before the commands EQ is
actually destroyed. This can lead for double completion handle by the
driver (polling and interrupt), if a command is executed and completed by
FW after the mode was changed, but before the EQ was destroyed.

Fix that by using the mlx5_cmd_allowed_opcode mechanism to guarantee
that only DESTROY_EQ command can be executed during this time period.

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Petr reported that after resume from suspend RTL8402 partially
truncates incoming packets, and re-initializing register RxConfig
before the actual chip re-initialization sequence is needed to avoid
the issue.
Reported-by: Petr Tesarik <ptesarik@suse.cz>
Proposed-by: Petr Tesarik <ptesarik@suse.cz>
Tested-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Petr reported that system freezes on r8169 driver load on a system
using ether_clk. The original change was done under the assumption
that the clock isn't needed for basic operations like chip register
access. But obviously that was wrong.
Therefore effectively revert the original change, and in addition
leave the clock active when suspending and WoL is enabled. Chip may
not be able to process incoming packets otherwise.

Fixes: 9f0b54cd ("r8169: move switching optional clock on/off to pll power functions")
Reported-by: Petr Tesarik <ptesarik@suse.cz>
Tested-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Geetha sowjanya says:

====================
Fix bugs in Octeontx2 netdev driver

In existing Octeontx2 network drivers code has issues
like stale entries in broadcast replication list, missing
L3TYPE for IPv6 frames, running tx queues on error and
race condition in mbox reset.
This patch set fixes the above issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Mbox implementation in octeontx2 driver has three states
alloc, send and reset in mbox response. VF allocate and
sends message to PF for processing, PF ACKs them back and
reset the mbox memory. In some case we see synchronization
issue where after msgs_acked is incremented and before
mbox_reset API is called, if current execution is scheduled
out and a different thread is scheduled in which checks for
msgs_acked. Since the new thread sees msgs_acked == msgs_sent
it will try to allocate a new message and to send a new mbox
message to PF.Now if mbox_reset is scheduled in, PF will see
'0' in msgs_send.
This patch fixes the issue by calling mbox_reset before
incrementing msgs_acked flag for last processing message and
checks for valid message size.

Fixes: d424b6c0 ("octeontx2-pf: Enable SRIOV and added VF mbox handling")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently in otx2_open on failure of nix_lf_start
transmit queues are not stopped which are already
started in link_event. Since the tx queues are not
stopped network stack still try's to send the packets
leading to driver crash while access the device resources.

Fixes: 50fe6c02 ("octeontx2-pf: Register and handle link notifications")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For TCP/UDP checksum offload feature in Octeontx2
expects L3TYPE to be set irrespective of IP header
checksum is being offloaded or not. Currently for
IPv6 frames L3TYPE is not being set resulting in
packet drop with checksum error. This patch fixes
this issue.

Fixes: 3ca6c4c8 ("octeontx2-pf: Add packet transmission support")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Packet replication feature present in Octeontx2
is a hardware linked list of PF and its VF
interfaces so that broadcast packets are sent
to all interfaces present in the list. It is
driver job to add and delete a PF/VF interface
to/from the list when the interface is brought
up and down. This patch fixes the
npc_enadis_default_entries function to handle
broadcast replication properly if packet replication
feature is present.

Fixes: 40df309e ("octeontx2-af: Support to enable/disable default MCAM entries")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2020-09-30

This series contains updates to ice driver only.

Jake increases the wait time for firmware response as it can take longer
than the current wait time. Preserves the NVM capabilities of the device in
safe mode so the device reports its NVM update capabilities properly
when in this state.

v2: Added cover letter
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If the driver initializes in safe mode, it will call
ice_set_safe_mode_caps. This results in clearing the capabilities
structures, in order to set them up for operating in safe mode, ensuring
many features are disabled.

This has a side effect of also clearing the capability bits that relate
to NVM update. The result is that the device driver will not indicate
support for unified update, even if the firmware is capable.

Fix this by adding the relevant capability fields to the list of values
we preserve. To simplify the code, use a common_cap structure instead of
a handful of local variables. To reduce some duplication of the
capability name, introduce a couple of macros used to restore the
capabilities values from the cached copy.

Fixes: de9b277e ("ice: Add support for unified NVM update flow capability")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Brijesh Behera <brijeshx.behera@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The ice driver needs to wait for a firmware response to each command to
write a block of data to the scratch area used to update the device
firmware. The driver currently waits for up to 1 second for this to be
returned.

It turns out that firmware might take longer than 1 second to return
a completion in some cases. If this happens, the flash update will fail
to complete.

Fix this by increasing the maximum time that the driver will wait for
both writing a block of data, and for activating the new NVM bank. The
timeout for an erase command is already several minutes, as the firmware
had to erase the entire bank which was already expected to take a minute
or more in the worst case.

In the case where firmware really won't respond, we will now take longer
to fail. However, this ensures that if the firmware is simply slow to
respond, the flash update can still complete. This new maximum timeout
should not adversely increase the update time, as the implementation for
wait_event_interruptible_timeout, and should wake very soon after we get
a completion event. It is better for a flash update be slow but still
succeed than to fail because we gave up too quickly.

Fixes: d69ea414 ("ice: implement device flash update via devlink")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Brijesh Behera <brijeshx.behera@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Alexei Starovoitov says:

====================
pull-request: bpf 2020-09-29

The following pull-request contains BPF updates for your *net* tree.

We've added 7 non-merge commits during the last 14 day(s) which contain
a total of 7 files changed, 28 insertions(+), 8 deletions(-).

The main changes are:

1) fix xdp loading regression in libbpf for old kernels, from Andrii.

2) Do not discard packet when NETDEV_TX_BUSY, from Magnus.

3) Fix corner cases in libbpf related to endianness and kconfig, from Tony.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: Fix for 32-bit DATA_FIN

The main fix is contained in patch 2, and that commit message explains
the issue with not properly converting truncated DATA_FIN sequence
numbers sent by the peer.

With patch 2 adding an unlocked read of msk->ack_seq, patch 1 cleans up
access to that data with READ_ONCE/WRITE_ONCE.

This does introduce two merge conflicts with net-next, but both have
straightforward resolution. Patch 1 modifies a line that got removed in
net-next so the modification can be dropped when merging. Patch 2 will
require a trivial conflict resolution for a modified function
declaration.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>