- 04 Sep, 2020 11 commits
-
-
Peter Zijlstra authored
Remove the historical junk and replace it with a WARN and a comment. The problem is that even though the kernel only uses TF single-step in kprobes and KGDB, both of which consume the event before this, QEMU/KVM has bugs in this area that can trigger this state so it has to be dealt with. Suggested-by:
Brian Gerst <brgerst@gmail.com> Suggested-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Daniel Thompson <daniel.thompson@linaro.org> Link: https://lore.kernel.org/r/20200902133201.170216274@infradead.org
-
Peter Zijlstra authored
The cond_local_irq_enable() block, dealing with vm86 and sending signals is only relevant for #DB-from-user, move it there. This then reduces handle_debug() to only the notifier call, so rename it to notify_debug(). Signed-off-by:
-
Peter Zijlstra authored
The historical SYSENTER junk is explicitly for from-kernel, so move it to the #DB-from-kernel handler. It is ordered after the notifier, which is important for KGDB which uses TF single-step and needs to consume the event before that point. Signed-off-by:
-
Peter Zijlstra authored
There's no point in calculating si_code if it's not going to be used. Signed-off-by:
-
Peter Zijlstra authored
The handle_debug(.user) argument is used to terminate the #DB handler early for the INT1-from-kernel case, since the kernel doesn't use INT1. Remove the argument and handle this explicitly in #DB-from-kernel. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200902133200.907020598@infradead.org
-
Peter Zijlstra authored
Kprobes are on kernel text, and thus only matter for #DB-from-kernel. Kprobes are ordered before the generic notifier, preserve that order. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
-
Peter Zijlstra authored
Move the BTF sync near the DR6 load, as this will be the only common code guaranteed to run on every #DB. Signed-off-by:
-
Andy Lutomirski authored
Trying to clear DR7 around a #DB from usermode malfunctions if the tasks schedules when delivering SIGTRAP. Rather than trying to define a special no-recursion region, just allow a single level of recursion. The same mechanism is used for NMI, and it hasn't caused any problems yet. Fixes: 9f58fdde ("x86/db: Split out dr6/7 handling") Reported-by:
Kyle Huey <me@kylehuey.com> Debugged-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
The WARN added in commit 3c73b81a ("x86/entry, selftests: Further improve user entry sanity checks") unconditionally triggers on a IVB machine because it does not support SMAP. For !SMAP hardware the CLAC/STAC instructions are patched out and thus if userspace sets AC, it is still have set after entry. Fixes: 3c73b81a ("x86/entry, selftests: Further improve user entry sanity checks") Signed-off-by:
-
Vamshi K Sthambamkadi authored
On i386, the order of parameters passed on regs is eax,edx,and ecx (as per regparm(3) calling conventions). Change the mapping in regs_get_kernel_argument(), so that arg1=ax arg2=dx, and arg3=cx. Running the selftests testcase kprobes_args_use.tc shows the result as passed. Fixes: 3c88ee19 ("x86: ptrace: Add function argument access API") Signed-off-by:
Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
-
Huang Ying authored
Commit: cc9aec03 ("x86/numa_emulation: Introduce uniform split capability") uses "-1" as the starting node ID, which causes the strange kernel log as follows, when "numa=fake=32G" is added to the kernel command line: Faking node -1 at [mem 0x0000000000000000-0x0000000893ffffff] (35136MB) Faking node 0 at [mem 0x0000001840000000-0x000000203fffffff] (32768MB) Faking node 1 at [mem 0x0000000894000000-0x000000183fffffff] (64192MB) Faking node 2 at [mem 0x0000002040000000-0x000000283fffffff] (32768MB) Faking node 3 at [mem 0x0000002840000000-0x000000303fffffff] (32768MB) And finally the kernel crashes: BUG: Bad page state in process swapper pfn:00011 page:(____ptrval____) refcount:0 mapcount:1 mapping:(____ptrval____) index:0x55cd7e44b270 pfn:0x11 failed to read mapping contents, not a valid kernel address? flags: 0x5(locked|uptodate) raw: 0000000000000005 000055cd7e44af30 000055cd7e44af50 0000000100000006 raw: 000055cd7e44b270 000055cd7e44b290 0000000000000000 000055cd7e44b510 page dumped because: page still charged to cgroup page->mem_cgroup:000055cd7e44b510 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.9.0-rc2 #1 Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 Call Trace: dump_stack+0x57/0x80 bad_page.cold+0x63/0x94 __free_pages_ok+0x33f/0x360 memblock_free_all+0x127/0x195 mem_init+0x23/0x1f5 start_kernel+0x219/0x4f5 secondary_startup_64+0xb6/0xc0 Fix this bug via using 0 as the starting node ID. This restores the original behavior before cc9aec03. [ mingo: Massaged the changelog. ] Fixes: cc9aec03 ("x86/numa_emulation: Introduce uniform split capability") Signed-off-by:
"Huang, Ying" <ying.huang@intel.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200904061047.612950-1-ying.huang@intel.com
-
- 03 Sep, 2020 2 commits
-
-
Joerg Roedel authored
One can not simply remove vmalloc faulting on x86-32. Upstream commit: 7f0a002b ("x86/mm: remove vmalloc faulting") removed it on x86 alltogether because previously the arch_sync_kernel_mappings() interface was introduced. This interface added synchronization of vmalloc/ioremap page-table updates to all page-tables in the system at creation time and was thought to make vmalloc faulting obsolete. But that assumption was incredibly naive. It turned out that there is a race window between the time the vmalloc or ioremap code establishes a mapping and the time it synchronizes this change to other page-tables in the system. During this race window another CPU or thread can establish a vmalloc mapping which uses the same intermediate page-table entries (e.g. PMD or PUD) and does no synchronization in the end, because it found all necessary mappings already present in the kernel reference page-table. But when these intermediate page-table entries are not yet synchronized, the other CPU or thread will continue with a vmalloc address that is not yet mapped in the page-table it currently uses, causing an unhandled page fault and oops like below: BUG: unable to handle page fault for address: fe80c000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 33183067 *pte = a8648163 Oops: 0002 [#1] SMP CPU: 1 PID: 13514 Comm: cve-2017-17053 Tainted: G ... Call Trace: ldt_dup_context+0x66/0x80 dup_mm+0x2b3/0x480 copy_process+0x133b/0x15c0 _do_fork+0x94/0x3e0 __ia32_sys_clone+0x67/0x80 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7eef549 So the arch_sync_kernel_mappings() interface is racy, but removing it would mean to re-introduce the vmalloc_sync_all() interface, which is even more awful. Keep arch_sync_kernel_mappings() in place and catch the race condition in the page-fault handler instead. Do a partial revert of above commit to get vmalloc faulting on x86-32 back in place. Fixes: 7f0a002b ("x86/mm: remove vmalloc faulting") Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Arvind Sankar authored
When CONFIG_RETPOLINE is disabled, Clang uses a jump table for the switch statement in cmdline_find_option (jump tables are disabled when CONFIG_RETPOLINE is enabled). This function is called very early in boot from sme_enable() if CONFIG_AMD_MEM_ENCRYPT is enabled. At this time, the kernel is still executing out of the identity mapping, but the jump table will contain virtual addresses. Fix this by disabling jump tables for cmdline.c when AMD_MEM_ENCRYPT is enabled. Signed-off-by:
Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by:
-
- 02 Sep, 2020 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - data sanitization and validtion fixes for report descriptor parser from Marc Zyngier - memory leak fix for hid-elan driver from Dinghao Liu - two device-specific quirks * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: core: Sanitize event code and type when mapping input HID: core: Correctly handle ReportSize being zero HID: elan: Fix memleak in elan_input_configured HID: microsoft: Add rumble support for the 8bitdo SN30 Pro+ controller HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for all Saitek X52 devices
-
Linus Torvalds authored
Merge tag 'for-5.9/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - writecache fix to allow dax_direct_access() to partitioned pmem devices. - multipath fix to avoid any Path Group initialization if 'pg_init_in_progress' isn't set. - crypt fix to use DECLARE_CRYPTO_WAIT() for onstack wait structures. - integrity fix to properly check integrity after device creation when in bitmap mode. - thinp and cache target __create_persistent_data_objects() fixes to reset the metadata's dm_block_manager pointer from PTR_ERR to NULL before returning from error path. - persistent-data block manager fix to guard against dm_block_manager NULL pointer dereference in dm_bm_is_read_only() and update various opencoded bm->read_only checks to use dm_bm_is_read_only() instead. * tag 'for-5.9/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin metadata: Fix use-after-free in dm_bm_set_read_only dm thin metadata: Avoid returning cmd->bm wild pointer on error dm cache metadata: Avoid returning cmd->bm wild pointer on error dm integrity: fix error reporting in bitmap mode after creation dm crypt: Initialize crypto wait structures dm mpath: fix racey management of PG initialization dm writecache: handle DAX to partitions on persistent memory correctly
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "Various small corruption fixes that have come in during the past month: - Avoid a log recovery failure for an insert range operation by rolling deferred ops incrementally instead of at the end. - Fix an off-by-one error when calculating log space reservations for anything involving an inode allocation or free. - Fix a broken shortform xattr verifier. - Ensure that the shortform xattr header padding is always initialized to zero" * tag 'xfs-5.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: initialize the shortform attr header padding entry xfs: fix boundary test in xfs_attr_shortform_verify xfs: fix off-by-one in inode alloc block reservation calculation xfs: finish dfops on every insert range shift iteration -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull epoll fixup from Al Viro: "Fixup for epoll regression; there's a better solution longer term, but this is the least intrusive fix" * 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix regression in "epoll: Keep a reference on files added to the check list"
-
Ye Bin authored
The following error ocurred when testing disk online/offline: [ 301.798344] device-mapper: thin: 253:5: aborting current metadata transaction [ 301.848441] device-mapper: thin: 253:5: failed to abort metadata transaction [ 301.849206] Aborting journal on device dm-26-8. [ 301.850489] EXT4-fs error (device dm-26) in __ext4_new_inode:943: Journal has aborted [ 301.851095] EXT4-fs (dm-26): Delayed block allocation failed for inode 398742 at logical offset 181 with max blocks 19 with error 30 [ 301.854476] BUG: KASAN: use-after-free in dm_bm_set_read_only+0x3a/0x40 [dm_persistent_data] Reason is: metadata_operation_failed abort_transaction dm_pool_abort_metadata __create_persistent_data_objects r = __open_or_format_metadata if (r) --> If failed will free pmd->bm but pmd->bm not set NULL dm_block_manager_destroy(pmd->bm); set_pool_mode dm_pool_metadata_read_only(pool->pmd); dm_bm_set_read_only(pmd->bm); --> use-after-free Add checks to see if pmd->bm is NULL in dm_bm_set_read_only and dm_bm_set_read_write functions. If bm is NULL it means creating the bm failed and so dm_bm_is_read_only must return true. Signed-off-by:Ye Bin <yebin10@huawei.com> Cc: stable@vger.kernel.org Signed-off-by:
Mike Snitzer <snitzer@redhat.com>
-
Ye Bin authored
Maybe __create_persistent_data_objects() caller will use PTR_ERR as a pointer, it will lead to some strange things. Signed-off-by:
-
Ye Bin authored
Maybe __create_persistent_data_objects() caller will use PTR_ERR as a pointer, it will lead to some strange things. Signed-off-by:
-
Al Viro authored
epoll_loop_check_proc() can run into a file already committed to destruction; we can't grab a reference on those and don't need to add them to the set for reverse path check anyway. Tested-by:
Marc Zyngier <maz@kernel.org> Fixes: a9ed4a65 ("epoll: Keep a reference on files added to the check list") Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.9-2020-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix infinite loop in the TUI for grouped events in 'perf top/record', eg when using "perf top -e '{cycles,instructions,cache-misses}'". - Fix segfault by skipping side-band event setup if HAVE_LIBBPF_SUPPORT is not set. - Fix synthesized branch stacks generated from CoreSight ETM trace and Intel PT hardware traces. - Fix error when synthesizing events from ARM SPE hardware trace. - The SNOOPX and REMOTE offsets in the data_src bitmask in perf records were were both 37, SNOOPX is 38, fix it. - Fix use of CPU list with summary option in 'perf sched timehist'. - Avoid an uninitialized read when using fake PMUs. - Set perf_event_attr.exclude_guest=1 for user-space counting. - Don't order events when doing a 'perf report -D' raw dump of perf.data records. - Set NULL sentinel in pmu_events table in "Parse and process metrics" 'perf test' - Fix basic bpf filtering 'perf test' on s390x. - Fix out of bounds array access in the 'perf stat' print_counters() evlist method. - Add mwait_idle_with_hints.constprop.0 to the list of idle symbols. - Use %zd for size_t printf formats on 32-bit. - Correct the help info of "perf record --no-bpf-event" option. - Add entries for CoreSight and Arm SPE tooling to MAINTAINERS. * tag 'perf-tools-fixes-for-v5.9-2020-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf report: Disable ordered_events for raw dump perf tools: Correct SNOOPX field offset perf intel-pt: Fix corrupt data after perf inject from perf cs-etm: Fix corrupt data after perf inject from perf top/report: Fix infinite loop in the TUI for grouped events perf parse-events: Avoid an uninitialized read when using fake PMUs perf stat: Fix out of bounds array access in the print_counters() evlist method perf test: Set NULL sentinel in pmu_events table in "Parse and process metrics" test perf parse-events: Set exclude_guest=1 for user-space counting perf record: Correct the help info of option "--no-bpf-event" perf tools: Use %zd for size_t printf formats on 32-bit MAINTAINERS: Add entries for CoreSight and Arm SPE tooling perf: arm-spe: Fix check error when synthesizing events perf symbols: Add mwait_idle_with_hints.constprop.0 to the list of idle symbols perf top: Skip side-band event setup if HAVE_LIBBPF_SUPPORT is not set perf sched timehist: Fix use of CPU list with summary option perf test: Fix basic bpf filtering test
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "Two small fixes and a bunch of lockdep fixes for warnings that show up with an upcoming tree locking update but are valid with current locks as well" * tag 'for-5.9-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: tree-checker: fix the error message for transid error btrfs: set the lockdep class for log tree extent buffers btrfs: set the correct lockdep class for new nodes btrfs: allocate scrub workqueues outside of locks btrfs: fix potential deadlock in the search ioctl btrfs: drop path before adding new uuid tree entry btrfs: block-group: fix free-space bitmap threshold
-
- 01 Sep, 2020 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Three minor fixes, all in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_debug: Remove superfluous close zone in resp_open_zone() scsi: libcxgbi: Fix a use after free in cxgbi_conn_xmit_pdu() scsi: qedf: Fix null ptr reference in qedf_stag_change_work
-
Mikulas Patocka authored
The dm-integrity target did not report errors in bitmap mode just after creation. The reason is that the function integrity_recalc didn't clean up ic->recalc_bitmap as it proceeded with recalculation. Fix this by updating the bitmap accordingly -- the double shift serves to rounddown. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Fixes: 468dfca3 ("dm integrity: add a bitmap mode") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by:
-
Damien Le Moal authored
Use the DECLARE_CRYPTO_WAIT() macro to properly initialize the crypto wait structures declared on stack before their use with crypto_wait_req(). Fixes: 39d13a1a ("dm crypt: reuse eboiv skcipher for IV generation") Fixes: bbb16584 ("dm crypt: Implement Elephant diffuser for Bitlocker compatibility") Cc: stable@vger.kernel.org Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Mike Snitzer authored
Commit 935fcc56 ("dm mpath: only flush workqueue when needed") changed flush_multipath_work() to avoid needless workqueue flushing (of a multipath global workqueue). But that change didn't realize the surrounding flush_multipath_work() code should also only run if 'pg_init_in_progress' is set. Fix this by only doing all of flush_multipath_work()'s PG init related work if 'pg_init_in_progress' is set. Otherwise multipath_wait_for_pg_init_completion() will run unconditionally but the preceeding flush_workqueue(kmpath_handlerd) may not. This could lead to deadlock (though only if kmpath_handlerd never runs a corresponding work to decrement 'pg_init_in_progress'). It could also be, though highly unlikely, that the kmpath_handlerd work that does PG init completes before 'pg_init_in_progress' is set, and then an intervening DM table reload's multipath_postsuspend() triggers flush_multipath_work(). Fixes: 935fcc56 ("dm mpath: only flush workqueue when needed") Cc: stable@vger.kernel.org Reported-by:
Ben Marzinski <bmarzins@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
The function dax_direct_access doesn't take partitions into account, it always maps pages from the beginning of the device. Therefore, persistent_memory_claim() must get the partition offset using get_start_sect() and add it to the page offsets passed to dax_direct_access(). Signed-off-by:
-
Jiri Olsa authored
Disable ordered_events for report raw dump, because for raw dump we want to see events as they are stored in the perf.data file, not sorted by time. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200827134830.126721-1-jolsa@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Al Grant authored
perf_event.h has macros that define the field offsets in the data_src bitmask in perf records. The SNOOPX and REMOTE offsets were both 37. These are distinct fields, and the bitfield layout in perf_mem_data_src confirms that SNOOPX should be at offset 38. Committer notes: This was extracted from a larger patch that also contained kernel changes. Fixes: 52839e65 ("perf tools: Add support for printing new mem_info encodings") Signed-off-by:
Al Grant <al.grant@arm.com> Reviewed-by:
Andi Kleen <ak@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/9974f2d0-bf7f-518e-d9f7-4520e5ff1bb0@foss.arm.comSigned-off-by:
-
Al Grant authored
Commit 42bbabed ("perf tools: Add hw_idx in struct branch_stack") changed the format of branch stacks in perf samples. When samples use this new format, a flag must be set in the corresponding event. Synthesized branch stacks generated from Intel PT were using the new format, but not setting the event attribute, leading to consumers seeing corrupt data. This patch fixes the issue by setting the event attribute to indicate use of the new format. Fixes: 42bbabed ("perf tools: Add hw_idx in struct branch_stack") Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Reviewed-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20200819084751.17686-2-leo.yan@linaro.orgSigned-off-by:
Leo Yan <leo.yan@linaro.org> Signed-off-by:
-
Al Grant authored
Commit 42bbabed ("perf tools: Add hw_idx in struct branch_stack") changed the format of branch stacks in perf samples. When samples use this new format, a flag must be set in the corresponding event. Synthesized branch stacks generated from CoreSight ETM trace were using the new format, but not setting the event attribute, leading to consumers seeing corrupt data. This patch fixes the issue by setting the event attribute to indicate use of the new format. Fixes: 42bbabed ("perf tools: Add hw_idx in struct branch_stack") Signed-off-by:
Andrea Brunato <andrea.brunato@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
-
Arnaldo Carvalho de Melo authored
For a while we need to have a dummy event for doing things like receiving PERF_RECORD_COMM, PERF_RECORD_EXEC, etc for threads being created and dying while we synthesize the pre-existing ones at tool start. This 'dummy' event is needed for keeping track of thread lifetime events early in the session but are uninteresting otherwise, i.e. no need to have it in a initial events menu for the non-grouped case, i.e. for: # perf top -e cycles,instructions or even for plain: # perf top When 'cycles' and that 'dummy' event are in place. The code to remove that 'dummy' event ended up creating an endless loop for the grouped case, i.e.: # perf top -e '{cycles,instructions}' Fix it. Fixes: bee9ca1c ("perf report TUI: Remove needless 'dummy' event from menu") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: -
Ian Rogers authored
With a fake_pmu the pmu_info isn't populated by perf_pmu__check_alias. In this case, don't try to copy the uninitialized values to the evsel. Signed-off-by:
Ian Rogers <irogers@google.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200826042910.1902374-2-irogers@google.comSigned-off-by:
-
Thomas Richter authored
Fix a compile error on F32 and gcc version 10.1 on s390 in file utils/stat-display.c. The error does not show up with make DEBUG=y. In fact the issue shows up when using both compiler options -O6 and -D_FORTIFY_SOURCE=2 (which are omitted with DEBUG=Y). This is the offending call chain: print_counter_aggr() printout(config, -1, 0, ...) with 2nd parm id set to -1 aggr_printout(config, x, id --> -1, ...) which leads to this code: case AGGR_NONE: if (evsel->percore && !config->percore_show_thread) { .... } else { fprintf(config->output, "CPU%*d%s", config->csv_output ? 0 : -7, evsel__cpus(evsel)->map[id], ^^ id is -1 !!!! config->csv_sep); } This is a compiler inlining issue which is detected on s390 but not on other plattforms. Output before: # make util/stat-display.o ..... util/stat-display.c: In function ‘perf_evlist__print_counters’: util/stat-display.c:121:4: error: array subscript -1 is below array bounds of ‘int[]’ [-Werror=array-bounds] 121 | fprintf(config->output, "CPU%*d%s", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 122 | config->csv_output ? 0 : -7, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 123 | evsel__cpus(evsel)->map[id], | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 124 | config->csv_sep); | ~~~~~~~~~~~~~~~~ In file included from util/evsel.h:13, from util/evlist.h:13, from util/stat-display.c:9: /root/linux/tools/lib/perf/include/internal/cpumap.h:10:7: note: while referencing ‘map’ 10 | int map[]; | ^~~ cc1: all warnings being treated as errors mv: cannot stat 'util/.stat-display.o.tmp': No such file or directory make[3]: *** [/root/linux/tools/build/Makefile.build:97: util/stat-display.o] Error 1 make[2]: *** [Makefile.perf:716: util/stat-display.o] Error 2 make[1]: *** [Makefile.perf:231: sub-make] Error 2 make: *** [Makefile:110: util/stat-display.o] Error 2 [root@t35lp46 perf]# Output after: # make util/stat-display.o ..... CC util/stat-display.o [root@t35lp46 perf]# Committer notes: Removed the removal of {} enclosing the multiline else block, as pointed out by Jiri Olsa. Suggested-by:Thomas Richter <tmricht@linux.ibm.com> Acked-by:
-
Thomas Richter authored
Linux 5.9 introduced perf test case "Parse and process metrics" and on s390 this test case always dumps core: [root@t35lp67 perf]# ./perf test -vvvv -F 67 67: Parse and process metrics : --- start --- metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC parsing metric: inst_retired.any / cpu_clk_unhalted.thread Segmentation fault (core dumped) [root@t35lp67 perf]# I debugged this core dump and gdb shows this call chain: (gdb) where #0 0x000003ffabc3192a in __strnlen_c_1 () from /lib64/libc.so.6 #1 0x000003ffabc293de in strcasestr () from /lib64/libc.so.6 #2 0x0000000001102ba2 in match_metric(list=0x1e6ea20 "inst_retired.any", n=<optimized out>) at util/metricgroup.c:368 #3 find_metric (map=<optimized out>, map=<optimized out>, metric=0x1e6ea20 "inst_retired.any") at util/metricgroup.c:765 #4 __resolve_metric (ids=0x0, map=<optimized out>, metric_list=0x0, metric_no_group=<optimized out>, m=<optimized out>) at util/metricgroup.c:844 #5 resolve_metric (ids=0x0, map=0x0, metric_list=0x0, metric_no_group=<optimized out>) at util/metricgroup.c:881 #6 metricgroup__add_metric (metric=<optimized out>, metric_no_group=metric_no_group@entry=false, events=<optimized out>, events@entry=0x3ffd84fb878, metric_list=0x0, metric_list@entry=0x3ffd84fb868, map=0x0) at util/metricgroup.c:943 #7 0x00000000011034ae in metricgroup__add_metric_list (map=0x13f9828 <map>, metric_list=0x3ffd84fb868, events=0x3ffd84fb878, metric_no_group=<optimized out>, list=<optimized out>) at util/metricgroup.c:988 #8 parse_groups (perf_evlist=perf_evlist@entry=0x1e70260, str=str@entry=0x12f34b2 "IPC", metric_no_group=<optimized out>, metric_no_merge=<optimized out>, fake_pmu=fake_pmu@entry=0x1462f18 <perf_pmu.fake>, metric_events=0x3ffd84fba58, map=0x1) at util/metricgroup.c:1040 #9 0x0000000001103eb2 in metricgroup__parse_groups_test( evlist=evlist@entry=0x1e70260, map=map@entry=0x13f9828 <map>, str=str@entry=0x12f34b2 "IPC", metric_no_group=metric_no_group@entry=false, metric_no_merge=metric_no_merge@entry=false, metric_events=0x3ffd84fba58) at util/metricgroup.c:1082 #10 0x00000000010c84d8 in __compute_metric (ratio2=0x0, name2=0x0, ratio1=<synthetic pointer>, name1=0x12f34b2 "IPC", vals=0x3ffd84fbad8, name=0x12f34b2 "IPC") at tests/parse-metric.c:159 #11 compute_metric (ratio=<synthetic pointer>, vals=0x3ffd84fbad8, name=0x12f34b2 "IPC") at tests/parse-metric.c:189 #12 test_ipc () at tests/parse-metric.c:208 ..... ..... omitted many more lines This test case was added with commit 218ca91d ("perf tests: Add parse metric test for frontend metric"). When I compile with make DEBUG=y it works fine and I do not get a core dump. It turned out that the above listed function call chain worked on a struct pmu_event array which requires a trailing element with zeroes which was missing. The marco map_for_each_event() loops over that array tests for members metric_expr/metric_name/metric_group being non-NULL. Adding this element fixes the issue. Output after: [root@t35lp46 perf]# ./perf test 67 67: Parse and process metrics : Ok [root@t35lp46 perf]# Committer notes: As Ian remarks, this is not s390 specific: <quote Ian> This also shows up with address sanitizer on all architectures (perhaps change the patch title) and perhaps add a "Fixes: <commit>" tag. ================================================================= ==4718==ERROR: AddressSanitizer: global-buffer-overflow on address 0x55c93b4d59e8 at pc 0x55c93a1541e2 bp 0x7ffd24327c60 sp 0x7ffd24327c58 READ of size 8 at 0x55c93b4d59e8 thread T0 #0 0x55c93a1541e1 in find_metric tools/perf/util/metricgroup.c:764:2 #1 0x55c93a153e6c in __resolve_metric tools/perf/util/metricgroup.c:844:9 #2 0x55c93a152f18 in resolve_metric tools/perf/util/metricgroup.c:881:9 #3 0x55c93a1528db in metricgroup__add_metric tools/perf/util/metricgroup.c:943:9 #4 0x55c93a151996 in metricgroup__add_metric_list tools/perf/util/metricgroup.c:988:9 #5 0x55c93a1511b9 in parse_groups tools/perf/util/metricgroup.c:1040:8 #6 0x55c93a1513e1 in metricgroup__parse_groups_test tools/perf/util/metricgroup.c:1082:9 #7 0x55c93a0108ae in __compute_metric tools/perf/tests/parse-metric.c:159:8 #8 0x55c93a010744 in compute_metric tools/perf/tests/parse-metric.c:189:9 #9 0x55c93a00f5ee in test_ipc tools/perf/tests/parse-metric.c:208:2 #10 0x55c93a00f1e8 in test__parse_metric tools/perf/tests/parse-metric.c:345:2 #11 0x55c939fd7202 in run_test tools/perf/tests/builtin-test.c:410:9 #12 0x55c939fd6736 in test_and_print tools/perf/tests/builtin-test.c:440:9 #13 0x55c939fd58c3 in __cmd_test tools/perf/tests/builtin-test.c:661:4 #14 0x55c939fd4e02 in cmd_test tools/perf/tests/builtin-test.c:807:9 #15 0x55c939e4763d in run_builtin tools/perf/perf.c:313:11 #16 0x55c939e46475 in handle_internal_command tools/perf/perf.c:365:8 #17 0x55c939e4737e in run_argv tools/perf/perf.c:409:2 #18 0x55c939e45f7e in main tools/perf/perf.c:539:3 0x55c93b4d59e8 is located 0 bytes to the right of global variable 'pme_test' defined in 'tools/perf/tests/parse-metric.c:17:25' (0x55c93b4d54a0) of size 1352 SUMMARY: AddressSanitizer: global-buffer-overflow tools/perf/util/metricgroup.c:764:2 in find_metric Shadow bytes around the buggy address: 0x0ab9a7692ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0ab9a7692b30: 00 00 00 00 00 00 00 00 00 00 00 00 00[f9]f9 f9 0x0ab9a7692b40: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 0x0ab9a7692b50: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 0x0ab9a7692b60: f9 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 00 00 0x0ab9a7692b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b80: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Shadow gap: cc </quote> I'm also adding the missing "Fixes" tag and setting just .name to NULL, as doing it that way is more compact (the compiler will zero out everything else) and the table iterators look for .name being NULL as the sentinel marking the end of the table. Fixes: 0a507af9 ("perf tests: Add parse metric test for ipc metric") Signed-off-by:Sumanth Korikkar <sumanthk@linux.ibm.com> Acked-by:
-
Jin Yao authored
Currently if we run 'perf record -e cycles:u', exclude_guest=0. But it doesn't make sense in most cases that we request for user-space counting but we also get the guest report. Of course, we also need to consider 'perf kvm' usage case that authorized perf users on the host may only want to count guest user space events. For example, # perf kvm --guest record -e cycles:u When we have 'exclude_guest=1' for 'perf kvm' usage, we may get nothing from guest events. To keep perf semantics consistent and clear, this patch sets exclude_guest=1 for user-space counting but except for 'perf kvm' usage. Before: perf record -e cycles:u ./div perf evlist -v cycles:u: ..., exclude_kernel: 1, exclude_hv: 1, ... After: perf record -e cycles:u ./div perf evlist -v cycles:u: ..., exclude_kernel: 1, exclude_hv: 1, exclude_guest: 1, ... Before: perf kvm --guest record -e cycles:u -vvv perf_event_attr: size 120 { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|ID|CPU|PERIOD read_format ID disabled 1 inherit 1 exclude_kernel 1 exclude_hv 1 freq 1 sample_id_all 1 After: perf kvm --guest record -e cycles:u -vvv perf_event_attr: size 120 { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|ID|CPU|PERIOD read_format ID disabled 1 inherit 1 exclude_kernel 1 exclude_hv 1 freq 1 sample_id_all 1 For Before/After, exclude_guest are both 0 for perf kvm usage. perf test 6 6: Parse event definition strings : Ok Signed-off-by:Jin Yao <yao.jin@linux.intel.com> Tested-by:
Like Xu <like.xu@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200814012120.16647-1-yao.jin@linux.intel.comSigned-off-by:
-
Wei Li authored
The help info of option "--no-bpf-event" is wrongly described as "record bpf events", correct it. Committer testing: $ perf record -h bpf Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] --clang-opt <clang options> options passed to clang when compiling BPF scriptlets --clang-path <clang path> clang binary to use for compiling BPF scriptlets --no-bpf-event do not record bpf events $ Fixes: 71184c6a ("perf record: Replace option --bpf-event with --no-bpf-event") Signed-off-by:Wei Li <liwei391@huawei.com> Acked-by:
Song Liu <songliubraving@fb.com> Tested-by:
-
Chris Wilson authored
A couple of trivial fixes for using %zd for size_t in the code supporting the ZSTD compression library. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
-
Marc Zyngier authored
When calling into hid_map_usage(), the passed event code is blindly stored as is, even if it doesn't fit in the associated bitmap. This event code can come from a variety of sources, including devices masquerading as input devices, only a bit more "programmable". Instead of taking the event code at face value, check that it actually fits the corresponding bitmap, and if it doesn't: - spit out a warning so that we know which device is acting up - NULLify the bitmap pointer so that we catch unexpected uses Code paths that can make use of untrusted inputs can now check that the mapping was indeed correct and bail out if not. Cc: stable@vger.kernel.org Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@gmail.com>
-
