- 12 Jan, 2021 10 commits
-
-
Serge Semin authored
DWC USB3 DT node is supposed to be compliant with the Generic xHCI Controller schema, but with additional vendor-specific properties, the controller-specific reference clocks and PHYs. So let's convert the currently available legacy text-based DWC USB3 bindings to the DT schema and make sure the DWC USB3 nodes are also validated against the usb-xhci.yaml schema. Note 1. we have to discard the nodename restriction of being prefixed with "dwc3@" string, since in accordance with the usb-hcd.yaml schema USB nodes are supposed to be named as "^usb(@.*)". Note 2. The clock-related properties are marked as optional to match the DWC USB3 driver expectation and to improve the bindings mainainability so in case if there is a glue-node it would the responsible for the clocks initialization. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201210090944.16283-11-Sergey.Semin@baikalelectronics.ruSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Serge Semin authored
With minor peculiarities (like uploading some vendor-specific firmware) these are just Generic xHCI controllers fully compatible with its properties. Make sure the Renesas USB xHCI DT nodes are also validated against the Generic xHCI DT schema. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201210090944.16283-10-Sergey.Semin@baikalelectronics.ruSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Serge Semin authored
For some reason the "brcm,xhci-brcm-v2" compatible string has been missing in the original bindings file. Add it to the Generic xHCI Controllers DT schema since the controller driver expects it to be supported. Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201210090944.16283-9-Sergey.Semin@baikalelectronics.ruSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Serge Semin authored
Currently the DT bindings of Generic xHCI Controllers are described by means of the legacy text file. Since such format is deprecated in favor of the DT schema, let's convert the Generic xHCI Controllers bindings file to the corresponding yaml files. There will be two of them: a DT schema for the xHCI controllers on a generic platform and a DT schema validating a generic xHCI controllers properties. The later will be used to validate the xHCI controllers, which aside from some vendor-specific features support the basic xHCI functionality. An xHCI-compatible DT node shall support the standard USB HCD properties and custom ones like: usb2-lpm-disable, usb3-lpm-capable, quirk-broken-port-ped and imod-interval-ns. In addition if a generic xHCI controller is being validated against the DT schema it is also supposed to be equipped with mandatory compatible string, single registers range, single interrupts source, and is supposed to optionally contain up to two reference clocks for the controller core and CSRs. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201210090944.16283-8-Sergey.Semin@baikalelectronics.ruSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Serge Semin authored
Even though the Generic PHY framework is the more preferable way of setting the USB PHY up, there are still many dts-files and DT bindings which rely on having the legacy "usb-phy" specified to attach particular USB PHYs to USB cores. Let's have the "usb-phy" property described in the generic USB HCD binding file so it would be validated against the nodes in which it's specified. Mark the property as deprecated to discourage the developers from using it. Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201210090944.16283-7-Sergey.Semin@baikalelectronics.ruSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Serge Semin authored
The host controller device might be designed to work for the particular products or applications. In that case its DT node is supposed to be equipped with the tpl-support property. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201210090944.16283-6-Sergey.Semin@baikalelectronics.ruSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Serge Semin authored
Aside from the UTMI+ there are also ULPI, Serial and HSIC PHY types that can be specified in the phy_type HCD property. Add them to the enumeration of the acceptable values. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201210090944.16283-5-Sergey.Semin@baikalelectronics.ruSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Serge Semin authored
There are only four OTG revisions are currently supported by the kernel: 0x0100, 0x0120, 0x0130, 0x0200. Any another value is considered as invalid. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201210090944.16283-4-Sergey.Semin@baikalelectronics.ruSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Serge Semin authored
The generic USB properties have been described in the legacy bindings text file: Documentation/devicetree/bindings/usb/generic.txt . Let's convert its content into the generic USB, USB HCD and USB DRD DT schemas. So the Generic USB schema will be applicable to all USB controllers, USB HCD - for the generic USB Host controllers and the USB DRD - for the USB Dual-role controllers. Note the USB DRD schema is supposed to work in conjunction with the USB peripheral/gadget and USB host controllers DT schemas. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201210090944.16283-3-Sergey.Semin@baikalelectronics.ruSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Serge Semin authored
There can be three distinctive types of the USB controllers: USB hosts, USB peripherals/gadgets and USB OTG, which can switch from one role to another. In order to have that hierarchy handled in the DT binding files, we need to collect common properties in a common DT schema and specific properties in dedicated schemas. Seeing the usb-hcd.yaml DT schema is dedicated for the USB host controllers only, let's move some common properties from there into the usb.yaml schema. So the later would be available to evaluate all currently supported types of the USB controllers. While at it add an explicit "additionalProperties: true" into the usb-hcd.yaml as setting the additionalProperties/unevaluateProperties properties is going to be get mandatory soon. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201210090944.16283-2-Sergey.Semin@baikalelectronics.ruSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 11 Jan, 2021 1 commit
-
-
Greg Kroah-Hartman authored
Resolves a merge issue in: drivers/usb/dwc3/gadget.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 10 Jan, 2021 12 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Search for <ncurses.h> in the default header path of HOSTCC - Tweak the option order to be kind to old BSD awk - Remove 'kvmconfig' and 'xenconfig' shorthands - Fix documentation * tag 'kbuild-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Documentation: kbuild: Fix section reference kconfig: remove 'kvmconfig' and 'xenconfig' shorthands lib/raid6: Let $(UNROLL) rules work with macOS userland kconfig: Support building mconf with vendor sysroot ncurses kconfig: config script: add a little user help MAINTAINERS: adjust GCC PLUGINS after gcc-plugin.sh removal
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is two driver fixes (megaraid_sas and hisi_sas). The megaraid one is a revert of a previous revert of a cpu hotplug fix which exposed a bug in the block layer which has been fixed in this merge window. The hisi_sas performance enhancement comes from switching to interrupt managed completion queues, which depended on the addition of devm_platform_get_irqs_affinity() which is now upstream via the irq tree in the last merge window" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: hisi_sas: Expose HW queues for v2 hw Revert "Revert "scsi: megaraid_sas: Added support for shared host tagset for cpuhotplug""
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - Missing CRC32 selections (Arnd) - Fix for a merge window regression with bdev inode init (Christoph) - bcache fixes - rnbd fixes - NVMe pull request from Christoph: - fix a race in the nvme-tcp send code (Sagi Grimberg) - fix a list corruption in an nvme-rdma error path (Israel Rukshin) - avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar) - add the susystem NQN quirk for a Samsung driver (Gopal Tiwari) - fix two compiler warnings in nvme-fcloop (James Smart) - don't call sleeping functions from irq context in nvme-fc (James Smart) - remove an unused argument (Max Gurtovoy) - remove unused exports (Minwoo Im) - Use-after-free fix for partition iteration (Ming) - Missing blk-mq debugfs flag annotation (John) - Bdev freeze regression fix (Satya) - blk-iocost NULL pointer deref fix (Tejun) * tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block: (26 commits) bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket bcache: check unsupported feature sets for bcache register bcache: fix typo from SUUP to SUPP in features.h bcache: set pdev_set_uuid before scond loop iteration blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED block/rnbd-clt: avoid module unload race with close confirmation block/rnbd: Adding name to the Contributors List block/rnbd-clt: Fix sg table use after free block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_close block/rnbd: Select SG_POOL for RNBD_CLIENT block: pre-initialize struct block_device in bdev_alloc_inode fs: Fix freeze_bdev()/thaw_bdev() accounting of bd_fsfreeze_sb nvme: remove the unused status argument from nvme_trace_bio_complete nvmet-rdma: Fix list_del corruption on queue establishment failure nvme: unexport functions with no external caller nvme: avoid possible double fetch in handling CQE nvme-tcp: Fix possible race of io_work and direct send nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A bit larger than I had hoped at this point, but it's all changes that will be directed towards stable anyway. In detail: - Fix a merge window regression on error return (Matthew) - Remove useless variable declaration/assignment (Ye Bin) - IOPOLL fixes (Pavel) - Exit and cancelation fixes (Pavel) - fasync lockdep complaint fix (Pavel) - Ensure SQPOLL is synchronized with creator life time (Pavel)" * tag 'io_uring-5.11-2021-01-10' of git://git.kernel.dk/linux-block: io_uring: stop SQPOLL submit on creator's death io_uring: add warn_once for io_uring_flush() io_uring: inline io_uring_attempt_task_drop() io_uring: io_rw_reissue lockdep annotations io_uring: synchronise ev_posted() with waitqueues io_uring: dont kill fasync under completion_lock io_uring: trigger eventfd for IOPOLL io_uring: Fix return value from alloc_fixed_file_ref_node io_uring: Delete useless variable ‘id’ in io_prep_async_work io_uring: cancel more aggressively in exit_work io_uring: drop file refs after task cancel io_uring: patch up IOPOLL overflow_flush sync io_uring: synchronise IOPOLL on task_submit fail
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for 5.11-rc3. Include in here are: - USB gadget driver fixes for reported issues - new usb-serial driver ids - dma from stack bugfixes - typec bugfixes - dwc3 bugfixes - xhci driver bugfixes - other small misc usb driver bugfixes All of these have been in linux-next with no reported issues" * tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits) usb: dwc3: gadget: Clear wait flag on dequeue usb: typec: Send uevent for num_altmodes update usb: typec: Fix copy paste error for NVIDIA alt-mode description usb: gadget: enable super speed plus kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urb usb: uas: Add PNY USB Portable SSD to unusual_uas usb: gadget: configfs: Preserve function ordering after bind failure usb: gadget: select CONFIG_CRC32 usb: gadget: core: change the comment for usb_gadget_connect usb: gadget: configfs: Fix use-after-free issue with udc_name usb: dwc3: gadget: Restart DWC3 gadget when enabling pullup usb: usbip: vhci_hcd: protect shift size USB: usblp: fix DMA to stack USB: serial: iuu_phoenix: fix DMA from stack USB: serial: option: add LongSung M5710 module support USB: serial: option: add Quectel EM160R-GL USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug usb: gadget: f_uac2: reset wMaxPacketSize usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for 5.11-rc3. Nothing major, just resolving some reported issues: - cleanup some remaining mentions of the ION drivers that were removed in 5.11-rc1 - comedi driver bugfix - two error path memory leak fixes All have been in linux-next for a while with no reported issues" * tag 'staging-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: ION: remove some references to CONFIG_ION staging: mt7621-dma: Fix a resource leak in an error handling path Staging: comedi: Return -EFAULT if copy_to_user() fails staging: spmi: hisi-spmi-controller: Fix some error handling paths
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.11-rc3. The majority here are fixes for the habanalabs drivers, but also in here are: - crypto driver fix - pvpanic driver fix - updated font file - interconnect driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits) Fonts: font_ter16x32: Update font with new upstream Terminus release misc: pvpanic: Check devm_ioport_map() for NULL speakup: Add github repository URL and bug tracker MAINTAINERS: Update Georgi's email address crypto: asym_tpm: correct zero out potential secrets habanalabs: Fix memleak in hl_device_reset interconnect: imx8mq: Use icc_sync_state interconnect: imx: Remove a useless test interconnect: imx: Add a missing of_node_put after of_device_is_available interconnect: qcom: fix rpmh link failures habanalabs: fix order of status check habanalabs: register to pci shutdown callback habanalabs: add validation cs counter, fix misplaced counters habanalabs/gaudi: retry loading TPC f/w on -EINTR habanalabs: adjust pci controller init to new firmware habanalabs: update comment in hl_boot_if.h habanalabs/gaudi: enhance reset message habanalabs: full FW hard reset support habanalabs/gaudi: disable CGM at HW initialization habanalabs: Revise comment to align with mirror list name ...
-
Viresh Kumar authored
Section 3.11 was incorrectly called 3.9, fix it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: - Address the 2nd boot failure due to snafu in signal handling code (first was generic console ttynull issue) - misc other fixes * tag 'arc-5.11-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [hsdk]: Enable FPU_SAVE_RESTORE ARC: unbork 5.11 bootup: fix snafu in _TIF_NOTIFY_SIGNAL handling include/soc: remove headers for EZChip NPS arch/arc: add copy_user_page() to <asm/page.h> to fix build error on ARC
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - A fix for machine check handling with VMAP stack on 32-bit. - A clang build fix. Thanks to Christophe Leroy and Nathan Chancellor. * tag 'powerpc-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Handle .text.{hot,unlikely}.* in linker script powerpc/32s: Fix RTAS machine check with VMAP stack
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: "As expected, fixes started trickling in after the holidays so here is the accumulated pile of x86 fixes for 5.11: - A fix for fanotify_mark() missing the conversion of x86_32 native syscalls which take 64-bit arguments to the compat handlers due to former having a general compat handler. (Brian Gerst) - Add a forgotten pmd page destructor call to pud_free_pmd_page() where a pmd page is freed. (Dan Williams) - Make IN/OUT insns with an u8 immediate port operand handling for SEV-ES guests more precise by using only the single port byte and not the whole s32 value of the insn decoder. (Peter Gonda) - Correct a straddling end range check before returning the proper MTRR type, when the end address is the same as top of memory. (Ying-Tsun Huang) - Change PQR_ASSOC MSR update scheme when moving a task to a resctrl resource group to avoid significant performance overhead with some resctrl workloads. (Fenghua Yu) - Avoid the actual task move overhead when the task is already in the resource group. (Fenghua Yu)" * tag 'x86_urgent_for_v5.11_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/resctrl: Don't move a task to the same resource group x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR x86/mtrr: Correct the range check before performing MTRR type lookups x86/sev-es: Fix SEV-ES OUT/IN immediate opcode vc handling x86/mm: Fix leak of pmd ptlock fanotify: Fix sys_fanotify_mark() on native x86-32
-
- 09 Jan, 2021 17 commits
-
-
Linus Torvalds authored
Merge tag 'hwmon-for-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix possible KASAN issue in amd_energy driver - Avoid configuration problem in pwm-fan driver - Fix kernel-doc warning in sbtsi_temp documentation * tag 'hwmon-for-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (amd_energy) fix allocation of hwmon_channel_info config hwmon: (pwm-fan) Ensure that calculation doesn't discard big period values hwmon: (sbtsi_temp) Fix Documenation kernel-doc warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengineLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: "A bunch of dmaengine driver fixes for: - coverity discovered issues for xilinx driver - qcom, gpi driver fix for undefined bhaviour and one off cleanup - update Peter's email for TI DMA drivers - one-off for idxd driver - resource leak fix for mediatek and milbeaut drivers" * tag 'dmaengine-fix-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: stm32-mdma: fix STM32_MDMA_VERY_HIGH_PRIORITY value dmaengine: xilinx_dma: fix mixed_enum_type coverity warning dmaengine: xilinx_dma: fix incompatible param warning in _child_probe() dmaengine: xilinx_dma: check dma_async_device_register return value dmaengine: qcom: fix gpi undefined behavior dt-bindings: dma: ti: Update maintainer and author information MAINTAINERS: Add entry for Texas Instruments DMA drivers qcom: bam_dma: Delete useless kfree code dmaengine: dw-edma: Fix use after free in dw_edma_alloc_chunk() dmaengine: milbeaut-xdmac: Fix a resource leak in the error handling path of the probe function dmaengine: mediatek: mtk-hsdma: Fix a resource leak in the error handling path of the probe function dmaengine: qcom: gpi: Fixes a format mismatch dmaengine: idxd: off by one in cleanup code dmaengine: ti: k3-udma: Fix pktdma rchan TPL level setup
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Three driver bugfixes for I2C. Buisness as usual" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mediatek: Fix apdma and i2c hand-shake timeout i2c: i801: Fix the i2c-mux gpiod_lookup_table not being properly terminated i2c: sprd: use a specific timeout to avoid system hang up issue
-
Darrick J. Wong authored
Change my email contact ahead of a likely painful eleven-month migration to a certain cobalt enteprisey groupware cloud product that will totally break my workflow. Some day I may get used to having to email being sequestered behind both claret and cerulean oath2+sms 2fa layers, but for now I'll stick with keying in one password to receive an email vs. the required four. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Pavel Begunkov authored
When the creator of SQPOLL io_uring dies (i.e. sqo_task), we don't want its internals like ->files and ->mm to be poked by the SQPOLL task, it have never been nice and recently got racy. That can happen when the owner undergoes destruction and SQPOLL tasks tries to submit new requests in parallel, and so calls io_sq_thread_acquire*(). That patch halts SQPOLL submissions when sqo_task dies by introducing sqo_dead flag. Once set, the SQPOLL task must not do any submission, which is synchronised by uring_lock as well as the new flag. The tricky part is to make sure that disabling always happens, that means either the ring is discovered by creator's do_exit() -> cancel, or if the final close() happens before it's done by the creator. The last is guaranteed by the fact that for SQPOLL the creator task and only it holds exactly one file note, so either it pins up to do_exit() or removed by the creator on the final put in flush. (see comments in uring_flush() around file->f_count == 2). One more place that can trigger io_sq_thread_acquire_*() is __io_req_task_submit(). Shoot off requests on sqo_dead there, even though actually we don't need to. That's because cancellation of sqo_task should wait for the request before going any further. note 1: io_disable_sqo_submit() does io_ring_set_wakeup_flag() so the caller would enter the ring to get an error, but it still doesn't guarantee that the flag won't be cleared. note 2: if final __userspace__ close happens not from the creator task, the file note will pin the ring until the task dies. Fixed: b1b6b5a3 ("kernel/io_uring: cancel io_uring before task works") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
files_cancel() should cancel all relevant requests and drop file notes, so we should never have file notes after that, including on-exit fput and flush. Add a WARN_ONCE to be sure. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
A simple preparation change inlining io_uring_attempt_task_drop() into io_uring_flush(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
We expect io_rw_reissue() to take place only during submission with uring_lock held. Add a lockdep annotation to check that invariant. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Coly Li authored
If BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET is set in incompat feature set, it means the cache device is created with obsoleted layout with obso_bucket_site_hi. Now bcache does not support this feature bit, a new BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE incompat feature bit is added for a better layout to support large bucket size. For the legacy compatibility purpose, if a cache device created with obsoleted BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit, all bcache devices attached to this cache set should be set to read-only. Then the dirty data can be written back to backing device before re-create the cache device with BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE feature bit by the latest bcache-tools. This patch checks BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit when running a cache set and attach a bcache device to the cache set. If this bit is set, - When run a cache set, print an error kernel message to indicate all following attached bcache device will be read-only. - When attach a bcache device, print an error kernel message to indicate the attached bcache device will be read-only, and ask users to update to latest bcache-tools. Such change is only for cache device whose bucket size >= 32MB, this is for the zoned SSD and almost nobody uses such large bucket size at this moment. If you don't explicit set a large bucket size for a zoned SSD, such change is totally transparent to your bcache device. Fixes: ffa47032 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Coly Li authored
When large bucket feature was added, BCH_FEATURE_INCOMPAT_LARGE_BUCKET was introduced into the incompat feature set. It used bucket_size_hi (which was added at the tail of struct cache_sb_disk) to extend current 16bit bucket size to 32bit with existing bucket_size in struct cache_sb_disk. This is not a good idea, there are two obvious problems, - Bucket size is always value power of 2, if store log2(bucket size) in existing bucket_size of struct cache_sb_disk, it is unnecessary to add bucket_size_hi. - Macro csum_set() assumes d[SB_JOURNAL_BUCKETS] is the last member in struct cache_sb_disk, bucket_size_hi was added after d[] which makes csum_set calculate an unexpected super block checksum. To fix the above problems, this patch introduces a new incompat feature bit BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE, when this bit is set, it means bucket_size in struct cache_sb_disk stores the order of power-of-2 bucket size value. When user specifies a bucket size larger than 32768 sectors, BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE will be set to incompat feature set, and bucket_size stores log2(bucket size) more than store the real bucket size value. The obsoleted BCH_FEATURE_INCOMPAT_LARGE_BUCKET won't be used anymore, it is renamed to BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET and still only recognized by kernel driver for legacy compatible purpose. The previous bucket_size_hi is renmaed to obso_bucket_size_hi in struct cache_sb_disk and not used in bcache-tools anymore. For cache device created with BCH_FEATURE_INCOMPAT_LARGE_BUCKET feature, bcache-tools and kernel driver still recognize the feature string and display it as "obso_large_bucket". With this change, the unnecessary extra space extend of bcache on-disk super block can be avoided, and csum_set() may generate expected check sum as well. Fixes: ffa47032 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Coly Li authored
This patch adds the check for features which is incompatible for current supported feature sets. Now if the bcache device created by bcache-tools has features that current kernel doesn't support, read_super() will fail with error messoage. E.g. if an unsupported incompatible feature detected, bcache register will fail with dmesg "bcache: register_bcache() error : Unsupported incompatible feature found". Fixes: d721a43f ("bcache: increase super block version for cache device and backing device") Fixes: ffa47032 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Coly Li authored
This patch fixes the following typos, from BCH_FEATURE_COMPAT_SUUP to BCH_FEATURE_COMPAT_SUPP from BCH_FEATURE_INCOMPAT_SUUP to BCH_FEATURE_INCOMPAT_SUPP from BCH_FEATURE_INCOMPAT_SUUP to BCH_FEATURE_RO_COMPAT_SUPP Fixes: d721a43f ("bcache: increase super block version for cache device and backing device") Fixes: ffa47032 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Yi Li authored
There is no need to reassign pdev_set_uuid in the second loop iteration, so move it to the place before second loop. Signed-off-by: Yi Li <yili@winhong.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefsLinus Torvalds authored
Pull zonefs fix from Damien Le Moal: "A single patch from Arnd to fix a missing dependency in zonefs Kconfig" * tag 'zonefs-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: select CONFIG_CRC32
-
Linus Torvalds authored
Merge tag 'linux-kselftest-kunit-fixes-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit fixes from Shuah Khan: "One fix to force the use of the 'tty' console for UML. Given that kunit tool requires the console output, explicitly stating the dependency makes sense than relying on it being the default" * tag 'linux-kselftest-kunit-fixes-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: Force the use of the 'tty' console for UML
-
Linus Torvalds authored
Merge tag 'linux-kselftest-next-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Two minor fixes to vDSO test changes in this merge window" * tag 'linux-kselftest-next-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/vDSO: fix -Wformat warning in vdso_test_correctness selftests/vDSO: add additional binaries to .gitignore
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation fixes from Jonathan Corbet: "A handful of relatively small documentation fixes" * tag 'docs-5.11-3' of git://git.lwn.net/linux: docs: admin-guide: bootconfig: Fix feils to fails Documentation/admin-guide: kernel-parameters: hyphenate comma-separated docs: binfmt-misc: Fix .rst formatting docs: remove mention of ENABLE_MUST_CHECK atomic: remove further references to atomic_ops Documentation: doc-guide: fixes to sphinx.rst docs/mm: concepts.rst: Correct the threshold to low watermark Documentation: admin: early_param()s are also listed in kernel-parameters docs: Fix reST markup when linking to sections
-