- 03 Apr, 2024 1 commit
-
-
Luca Ceresoli authored
Building with CONFIG_OF=n triggers: warning: 'rk3308_codec_of_match' defined but not used [-Wunused-const-variable=] warning: unused variable 'rk3308_codec_of_match' [-Wunused-const-variable] Even though OF is needed for probing, fix by declaring as __maybe_unused to still allow building on non-OF configurations for build testing. Fixes: 9fdd7b45 ("arm64: defconfig: enable Rockchip RK3308 internal audio codec driver") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202403271905.BYbGJiPi-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202403271907.0z0uuG5I-lkp@intel.com/Signed-off-by:
Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://msgid.link/r/20240403-rk3308-audio-codec-fix-warning-v2-1-816bae4c1dc5@bootlin.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 26 Mar, 2024 13 commits
-
-
Luca Ceresoli authored
Add driver for the internal audio codec of the Rockchip RK3308 SoC. Initially based on the vendor kernel driver [0], with lots of cleanups, fixes, improvements, conversion to DAPM and removal of some features. [0] https://github.com/rockchip-linux/kernel/blob/develop-4.19/sound/soc/codecs/rk3308_codec.cSigned-off-by:
-
Luca Ceresoli authored
No macro currently allows handling a stereo control that has left and right in the same register and whose minimum register value is not zero. Add one that does that. Note that even though the snd_soc_*_volsw_range() look more appropriate given the _range suffix, they are not suitable because they don't honor the two shift values. The snd_soc_*_volsw() look more generic and are suitable for the task. Signed-off-by:
-
Luca Ceresoli authored
Add device tree bindings document for the internal audio codec of the Rockchip RK3308 SoC. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Mark Brown authored
Merge series from Ondřej Jirman <megi@xff.cz>: This series adds support for jack detection to this codec. I used and tested this on Pinephone. It works quite nicely. I tested it against Android headset mic button resistor specification. The patches are a rewritten and debugged version of the original ones from Arnaud Ferraris and Samuel Holland, improved to better handle headset button presses and with more robust plug-in/out event debouncing, and to use set_jack API instead of sniffing the sound card widget names, to detect the type of jack connector.
-
Mark Brown authored
Merge series from Zhang Yi <zhangyi@everest-semi.com>: We changed the configuration related to hibernation. and delete the REG_SUPPLY to cover mute issue.
-
Mark Brown authored
Merge series from Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>: At the moment we cannot instantiate two dmaengine_pcms with the same parent device, as the components will be named the same, leading to conflicts. Add 'name' field to the snd_dmaengine_pcm_config, and use that (if defined) as the component name instead of deriving the component name from the device.
-
Mark Brown authored
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>: Set of loosely connected patches. Most impactful change is dropping any permisiveness when snd_soc_dapm_add_routes() fails in soc-topology.c To do it safely, disable route checks for all skylake-driver boards. Relevant background: Since commit daa480bd ("ASoC: soc-core: tidyup for snd_soc_dapm_add_routes()") route checks are no longer permissive. Probe failures for Intel boards have been partially addressed by commit a22ae72b ("ASoC: soc-core: isable route checks for legacy devices") and its follow up but only skl_nau88l25_ssm4567.c is patched. The rest of the boards still need fixing. After that, removal of copy-pastas found in ssm4567.c and redundant code in i2s_test.c for avs-boards. Changes in v2: - glk_rt5682_max98357a.c and skl_hda_dsp_generic.c now disable route checks only for the skylake-drvier - asoc now logs failures of snd_soc_dapm_add_routes() in soc-topology.c Amadeusz Sławiński (1): ASoC: Intel: avs: i2s_test: Remove redundant dapm routes Cezary Rojewski (4): ASoC: Intel: Disable route checks for Skylake boards ASoC: topology: Do not ignore route checks when parsing graphs ASoC: Intel: avs: ssm4567: Do not ignore route checks ASoC: Intel: avs: ssm4567: Board cleanup sound/soc/intel/avs/boards/i2s_test.c | 79 ------------------- sound/soc/intel/avs/boards/ssm4567.c | 5 +- sound/soc/intel/boards/bxt_da7219_max98357a.c | 1 + sound/soc/intel/boards/bxt_rt298.c | 1 + sound/soc/intel/boards/glk_rt5682_max98357a.c | 2 + sound/soc/intel/boards/kbl_da7219_max98357a.c | 1 + sound/soc/intel/boards/kbl_da7219_max98927.c | 4 + sound/soc/intel/boards/kbl_rt5660.c | 1 + sound/soc/intel/boards/kbl_rt5663_max98927.c | 2 + .../intel/boards/kbl_rt5663_rt5514_max98927.c | 1 + sound/soc/intel/boards/skl_hda_dsp_generic.c | 2 + .../soc/intel/boards/skl_nau88l25_max98357a.c | 1 + sound/soc/intel/boards/skl_rt286.c | 1 + sound/soc/soc-topology.c | 11 ++- 14 files changed, 27 insertions(+), 85 deletions(-) -- 2.25.1
-
Mark Brown authored
Merge series from Chancel Liu <chancel.liu@nxp.com>: echo /lib/firmware/fw.elf > /sys/class/remoteproc/remoteproc0/firmware (A) echo start > /sys/class/remoteproc/remoteproc0/state (B) echo stop > /sys/class/remoteproc/remoteproc0/state The rpmsg sound card is registered in (A) and unregistered in (B). After "start", imx-audio-rpmsg registers devices for ASoC platform driver and machine driver. Then sound card is registered. After "stop", imx-audio-rpmsg unregisters devices for ASoC platform driver and machine driver. Then sound card is unregistered.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This series from Brent Lu adds common helpers and board configurations to reduce the number of quirks.
-
Mark Brown authored
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>: This is the start of a series cleaning up the Mediatek drivers with some preparatory cleanups and improvements.
-
John Watts authored
Clock direction is marked as 'unsigned int' but only two values are currently used in practice. Note these down in the documentation. Signed-off-by:
John Watts <contact@jookia.org> Link: https://msgid.link/r/20240326-dai_mclk_hint-v1-1-653cbd2d78d9@jookia.orgSigned-off-by:
-
Pierre-Louis Bossart authored
We have a couple of duplicate logs and missing information, add __func__ consistently and make sure useful error codes are logged. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://msgid.link/r/20240325221925.206507-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
The gpio field is not used anymore, remove the leftover. This also fixes the compilation error after the ... Fixes: 9855f05e ("ASoC: fsl: imx-es8328: Switch to using gpiod API") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://msgid.link/r/20240325191341.3977321-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
- 25 Mar, 2024 26 commits
-
-
Brent Lu authored
Introduce "cml_rt5682_def" for cml boards which implement headphone codec on SSP0 and speaker amplifiers on SSP1. Reviewed-by:
Brent Lu <brent.lu@intel.com> Signed-off-by:
-
Brent Lu authored
Remove sof_nau8825 board id and use adl_nau8825_def instead since SSP port assignment is the same. Reviewed-by:
-
Brent Lu authored
Remove SOF_NUM_IDISP_HDMI(3) from board quirks since the value is 3 if not defined. Reviewed-by:
-
Brent Lu authored
Remove SOF_NUM_IDISP_HDMI(3) from board quirks since the value is 3 if not defined. Reviewed-by:
-
Brent Lu authored
Introduce "rpl_da7219_def" board to reduce the number of rpl board configs. This config could support all boards which implement headphone codec on SSP0 and speaker amplifiers on SSP1. Reviewed-by:
-
Brent Lu authored
Introduce "adl_da7219_def" board to reduce the number of jsl board configs. This config could support all boards which implement headphone codec on SSP0 and speaker amplifiers on SSP1. Reviewed-by:
-
Brent Lu authored
Introduce "jsl_da7219_def" board to reduce the number of jsl board configs. This config could support all boards which implement headphone codec on SSP0 and speaker amplifiers on SSP1. Reviewed-by:
-
Brent Lu authored
PLL bypass mode requires mclk to be present. However, mclk pin is not connected in JSL boards. Here we add the SOF_DA7219_MCLK_EN quirk to improve driver readability. Reviewed-by:
-
Brent Lu authored
Add exit function to headphone codec dai link. Reviewed-by:
-
Brent Lu authored
Use intel_board module to generate DAI link array and update num_links field in snd_soc_card structure. Reviewed-by:
-
Brent Lu authored
Use intel_board module to initialize sof_card_private structure. Reviewed-by:
-
Brent Lu authored
Use intel_board module to initialize sof_card_private structure Reviewed-by:
-
Brent Lu authored
Use intel_board module to initialize sof_card_private structure. Reviewed-by:
-
Brent Lu authored
Use intel_board module to initialize sof_card_private structure. Reviewed-by:
-
Brent Lu authored
Add a helper function for machine drivers to initialize common part of sof_card_private structure. Also unify the macros of board quirks for the initialization. Reviewed-by:
-
Brent Lu authored
Rename the quirk in preparation for future changes: common quriks will be defined and handled in board helper module. Reviewed-by:
-
Brent Lu authored
This commit supports RPL boards which implement ALC5650 dual I2S interface codec. SSP port usage: HP: SSP0 -> AIF1 SPK: SSP1 -> AIF2 BT: SSP2 -> BT Reviewed-by:
-
Brent Lu authored
This configuration supports RPL boards which implement DA7219 on SSP0 and MAX98360A on SSP1. DA7219 uses PLL bypass mode to avoid WCLK locking problem. To use this mode, the MCLK frequency must be 12.288 or 24.576MHz in the topology binary. Reviewed-by:
-
Brent Lu authored
Since there is a helper function to generate entire DAI link array, we switch individual dai link helpers to static function. No functional change in this commit. Reviewed-by:
-
Brent Lu authored
Use intel_board module to generate DAI link array and update num_links field in snd_soc_card structure. Reviewed-by:
-
Brent Lu authored
Add an new field link_id_overwrite to sof_card_private structure to support machine drivers which DAI link ID is fixed number or discontinue (i.e. no-codec boards). If this field is zero, DAI array index will be used as link ID. Otherwise the value extracted from link_id_overwrite will be used. The field link_id_overwrite is supposed to be initialized by SOF_LINK_IDS macro like following example. ctx->link_id_overwrite = SOF_LINK_IDS(HEADPHONE_BE_ID, \ DMIC01_BE_ID, \ DMIC16K_BE_ID, \ IDISP_HDMI_BE_ID, \ SPK_BE_ID, \ BT_OFFLOAD_BE_ID, \ HDMI_IN_BE_ID) An exception is that, if you use link_order_overwrite to overwrite DAI link order, then you need to use the same order to build link_id_overwrite variable as well. Reviewed-by:
-
Kartik Agarwala authored
Convert WM8974 audio CODEC bindings from text to dtschema. Signed-off-by:
Kartik Agarwala <agarwala.kartik@gmail.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://msgid.link/r/20240325181943.116733-1-agarwala.kartik@gmail.comSigned-off-by:
-
Frank Li authored
Convert fsl,esai.txt to yaml. So DTB_CHECK tools can verify dts file about esai part. clock-names 'spba' is optional according to description. So minItems of clocks and clock-names is 3. Signed-off-by:
Frank Li <Frank.Li@nxp.com> Reviewed-by:
-
AngeloGioacchino Del Regno authored
MediaTek sound card drivers are checking whether a DAI link is present and used on a board to assign the correct parameters and this is done by checking the codec DAI names at probe time. If no real codec is present, assign the dummy codec to the DAI link to avoid NULL pointer during string comparison. Fixes: 4302187d ("ASoC: mediatek: common: add soundcard driver common code") Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://msgid.link/r/20240313110147.1267793-5-angelogioacchino.delregno@collabora.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
Both the enumerations for UL/DL rates, delay data and the functions adda_{dl,ul}_rate_transform were duplicated for each MediaTek SoC dai-adda driver: move the common bits to a new mtk-dai-adda-common file and its header. While at it, also add the "mtk_" prefix to the exported functions. Signed-off-by: -
AngeloGioacchino Del Regno authored
Simplify the probe function by switching error prints to return dev_err_probe(), lowering the lines count; while at it, also beautify some messages and change some others' level from warn to error. Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Link: https://msgid.link/r/20240313110147.1267793-3-angelogioacchino.delregno@collabora.comSigned-off-by:
-
