1. 17 Sep, 2015 3 commits
    • Markos Chandras's avatar
      MIPS: Fix seccomp syscall argument for MIPS64 · 38da5ebc
      Markos Chandras authored
      [ Upstream commit 9f161439 ]
      
      Commit 4c21b8fd ("MIPS: seccomp: Handle indirect system calls (o32)")
      fixed indirect system calls on O32 but it also introduced a bug for MIPS64
      where it erroneously modified the v0 (syscall) register with the assumption
      that the sycall offset hasn't been taken into consideration. This breaks
      seccomp on MIPS64 n64 and n32 ABIs. We fix this by replacing the addition
      with a move instruction.
      
      Fixes: 4c21b8fd ("MIPS: seccomp: Handle indirect system calls (o32)")
      Cc: <stable@vger.kernel.org> # 3.15+
      Reviewed-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Signed-off-by: default avatarMarkos Chandras <markos.chandras@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/10951/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      38da5ebc
    • Guenter Roeck's avatar
      regmap: regcache-rbtree: Clean new present bits on present bitmap resize · ec692f3c
      Guenter Roeck authored
      [ Upstream commit 8ef9724b ]
      
      When inserting a new register into a block, the present bit map size is
      increased using krealloc. krealloc does not clear the additionally
      allocated memory, leaving it filled with random values. Result is that
      some registers are considered cached even though this is not the case.
      
      Fix the problem by clearing the additionally allocated memory. Also, if
      the bitmap size does not increase, do not reallocate the bitmap at all
      to reduce overhead.
      
      Fixes: 3f4ff561 ("regmap: rbtree: Make cache_present bitmap per node")
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarMark Brown <broonie@kernel.org>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      ec692f3c
    • Charles Keepax's avatar
      mfd: arizona: Fix initialisation of the PM runtime · 86e46777
      Charles Keepax authored
      [ Upstream commit 72e43164 ]
      
      The PM runtime core by default assumes a chip is suspended when runtime
      PM is enabled. Currently the arizona driver enables runtime PM when the
      chip is fully active and then disables the DCVDD regulator at the end of
      arizona_dev_init. This however has several problems, firstly the if we
      reach the end of arizona_dev_init, we did not properly follow all the
      proceedures for shutting down the chip, and most notably we never marked
      the chip as cache only so any writes occurring between then and the next
      PM runtime resume will be lost. Secondly, if we are already resumed when
      we reach the end of dev_init, then at best we get unbalanced regulator
      enable/disables at work we lose DCVDD whilst we need it.
      
      Additionally, since the commit 4f0216409f7c ("mfd: arizona: Add better
      support for system suspend"), the PM runtime operations may
      disable/enable the IRQ, so the IRQs must now be enabled before we call
      any PM operations.
      
      This patch adds a call to pm_runtime_set_active to inform the PM core
      that the device is starting up active and moves the PM enabling to
      around the IRQ initialisation to avoid any PM callbacks happening until
      the IRQs are initialised.
      
      Cc: stable@vger.kernel.org # v3.5+
      Signed-off-by: default avatarCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
      Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
      Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      86e46777
  2. 16 Sep, 2015 7 commits
  3. 15 Sep, 2015 10 commits
  4. 14 Sep, 2015 1 commit
    • Herton R. Krzesinski's avatar
      ipc,sem: fix use after free on IPC_RMID after a task using same semaphore set exits · 38b50c47
      Herton R. Krzesinski authored
      [ Upstream commit 602b8593 ]
      
      The current semaphore code allows a potential use after free: in
      exit_sem we may free the task's sem_undo_list while there is still
      another task looping through the same semaphore set and cleaning the
      sem_undo list at freeary function (the task called IPC_RMID for the same
      semaphore set).
      
      For example, with a test program [1] running which keeps forking a lot
      of processes (which then do a semop call with SEM_UNDO flag), and with
      the parent right after removing the semaphore set with IPC_RMID, and a
      kernel built with CONFIG_SLAB, CONFIG_SLAB_DEBUG and
      CONFIG_DEBUG_SPINLOCK, you can easily see something like the following
      in the kernel log:
      
         Slab corruption (Not tainted): kmalloc-64 start=ffff88003b45c1c0, len=64
         000: 6b 6b 6b 6b 6b 6b 6b 6b 00 6b 6b 6b 6b 6b 6b 6b  kkkkkkkk.kkkkkkk
         010: ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff  ....kkkk........
         Prev obj: start=ffff88003b45c180, len=64
         000: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a  .....N......ZZZZ
         010: ff ff ff ff ff ff ff ff c0 fb 01 37 00 88 ff ff  ...........7....
         Next obj: start=ffff88003b45c200, len=64
         000: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a  .....N......ZZZZ
         010: ff ff ff ff ff ff ff ff 68 29 a7 3c 00 88 ff ff  ........h).<....
         BUG: spinlock wrong CPU on CPU#2, test/18028
         general protection fault: 0000 [#1] SMP
         Modules linked in: 8021q mrp garp stp llc nf_conntrack_ipv4 nf_defrag_ipv4 ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc ppdev input_leds joydev parport_pc parport floppy serio_raw virtio_balloon virtio_rng virtio_console virtio_net iosf_mbi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcspkr qxl ttm drm_kms_helper drm snd_hda_codec_generic i2c_piix4 snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore crc32c_intel virtio_pci virtio_ring virtio pata_acpi ata_generic [last unloaded: speedstep_lib]
         CPU: 2 PID: 18028 Comm: test Not tainted 4.2.0-rc5+ #1
         Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014
         RIP: spin_dump+0x53/0xc0
         Call Trace:
           spin_bug+0x30/0x40
           do_raw_spin_unlock+0x71/0xa0
           _raw_spin_unlock+0xe/0x10
           freeary+0x82/0x2a0
           ? _raw_spin_lock+0xe/0x10
           semctl_down.clone.0+0xce/0x160
           ? __do_page_fault+0x19a/0x430
           ? __audit_syscall_entry+0xa8/0x100
           SyS_semctl+0x236/0x2c0
           ? syscall_trace_leave+0xde/0x130
           entry_SYSCALL_64_fastpath+0x12/0x71
         Code: 8b 80 88 03 00 00 48 8d 88 60 05 00 00 48 c7 c7 a0 2c a4 81 31 c0 65 8b 15 eb 40 f3 7e e8 08 31 68 00 4d 85 e4 44 8b 4b 08 74 5e <45> 8b 84 24 88 03 00 00 49 8d 8c 24 60 05 00 00 8b 53 04 48 89
         RIP  [<ffffffff810d6053>] spin_dump+0x53/0xc0
          RSP <ffff88003750fd68>
         ---[ end trace 783ebb76612867a0 ]---
         NMI watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [test:18053]
         Modules linked in: 8021q mrp garp stp llc nf_conntrack_ipv4 nf_defrag_ipv4 ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc ppdev input_leds joydev parport_pc parport floppy serio_raw virtio_balloon virtio_rng virtio_console virtio_net iosf_mbi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcspkr qxl ttm drm_kms_helper drm snd_hda_codec_generic i2c_piix4 snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore crc32c_intel virtio_pci virtio_ring virtio pata_acpi ata_generic [last unloaded: speedstep_lib]
         CPU: 3 PID: 18053 Comm: test Tainted: G      D         4.2.0-rc5+ #1
         Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014
         RIP: native_read_tsc+0x0/0x20
         Call Trace:
           ? delay_tsc+0x40/0x70
           __delay+0xf/0x20
           do_raw_spin_lock+0x96/0x140
           _raw_spin_lock+0xe/0x10
           sem_lock_and_putref+0x11/0x70
           SYSC_semtimedop+0x7bf/0x960
           ? handle_mm_fault+0xbf6/0x1880
           ? dequeue_task_fair+0x79/0x4a0
           ? __do_page_fault+0x19a/0x430
           ? kfree_debugcheck+0x16/0x40
           ? __do_page_fault+0x19a/0x430
           ? __audit_syscall_entry+0xa8/0x100
           ? do_audit_syscall_entry+0x66/0x70
           ? syscall_trace_enter_phase1+0x139/0x160
           SyS_semtimedop+0xe/0x10
           SyS_semop+0x10/0x20
           entry_SYSCALL_64_fastpath+0x12/0x71
         Code: 47 10 83 e8 01 85 c0 89 47 10 75 08 65 48 89 3d 1f 74 ff 7e c9 c3 0f 1f 44 00 00 55 48 89 e5 e8 87 17 04 00 66 90 c9 c3 0f 1f 00 <55> 48 89 e5 0f 31 89 c1 48 89 d0 48 c1 e0 20 89 c9 48 09 c8 c9
         Kernel panic - not syncing: softlockup: hung tasks
      
      I wasn't able to trigger any badness on a recent kernel without the
      proper config debugs enabled, however I have softlockup reports on some
      kernel versions, in the semaphore code, which are similar as above (the
      scenario is seen on some servers running IBM DB2 which uses semaphore
      syscalls).
      
      The patch here fixes the race against freeary, by acquiring or waiting
      on the sem_undo_list lock as necessary (exit_sem can race with freeary,
      while freeary sets un->semid to -1 and removes the same sem_undo from
      list_proc or when it removes the last sem_undo).
      
      After the patch I'm unable to reproduce the problem using the test case
      [1].
      
      [1] Test case used below:
      
          #include <stdio.h>
          #include <sys/types.h>
          #include <sys/ipc.h>
          #include <sys/sem.h>
          #include <sys/wait.h>
          #include <stdlib.h>
          #include <time.h>
          #include <unistd.h>
          #include <errno.h>
      
          #define NSEM 1
          #define NSET 5
      
          int sid[NSET];
      
          void thread()
          {
                  struct sembuf op;
                  int s;
                  uid_t pid = getuid();
      
                  s = rand() % NSET;
                  op.sem_num = pid % NSEM;
                  op.sem_op = 1;
                  op.sem_flg = SEM_UNDO;
      
                  semop(sid[s], &op, 1);
                  exit(EXIT_SUCCESS);
          }
      
          void create_set()
          {
                  int i, j;
                  pid_t p;
                  union {
                          int val;
                          struct semid_ds *buf;
                          unsigned short int *array;
                          struct seminfo *__buf;
                  } un;
      
                  /* Create and initialize semaphore set */
                  for (i = 0; i < NSET; i++) {
                          sid[i] = semget(IPC_PRIVATE , NSEM, 0644 | IPC_CREAT);
                          if (sid[i] < 0) {
                                  perror("semget");
                                  exit(EXIT_FAILURE);
                          }
                  }
                  un.val = 0;
                  for (i = 0; i < NSET; i++) {
                          for (j = 0; j < NSEM; j++) {
                                  if (semctl(sid[i], j, SETVAL, un) < 0)
                                          perror("semctl");
                          }
                  }
      
                  /* Launch threads that operate on semaphore set */
                  for (i = 0; i < NSEM * NSET * NSET; i++) {
                          p = fork();
                          if (p < 0)
                                  perror("fork");
                          if (p == 0)
                                  thread();
                  }
      
                  /* Free semaphore set */
                  for (i = 0; i < NSET; i++) {
                          if (semctl(sid[i], NSEM, IPC_RMID))
                                  perror("IPC_RMID");
                  }
      
                  /* Wait for forked processes to exit */
                  while (wait(NULL)) {
                          if (errno == ECHILD)
                                  break;
                  };
          }
      
          int main(int argc, char **argv)
          {
                  pid_t p;
      
                  srand(time(NULL));
      
                  while (1) {
                          p = fork();
                          if (p < 0) {
                                  perror("fork");
                                  exit(EXIT_FAILURE);
                          }
                          if (p == 0) {
                                  create_set();
                                  goto end;
                          }
      
                          /* Wait for forked processes to exit */
                          while (wait(NULL)) {
                                  if (errno == ECHILD)
                                          break;
                          };
                  }
          end:
                  return 0;
          }
      
      [akpm@linux-foundation.org: use normal comment layout]
      Signed-off-by: default avatarHerton R. Krzesinski <herton@redhat.com>
      Acked-by: default avatarManfred Spraul <manfred@colorfullife.com>
      Cc: Davidlohr Bueso <dave@stgolabs.net>
      Cc: Rafael Aquini <aquini@redhat.com>
      CC: Aristeu Rozanski <aris@redhat.com>
      Cc: David Jeffery <djeffery@redhat.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      38b50c47
  5. 03 Sep, 2015 1 commit
  6. 31 Aug, 2015 1 commit
  7. 27 Aug, 2015 17 commits