[ Upstream commit 6738028d ]

Command 'perf record' and 'perf report' on a system without kernel
debuginfo packages uses /proc/kallsyms and /proc/modules to find
addresses for kernel and module symbols. On x86 this works for root and
non-root users.

On s390, when invoked as non-root user, many of the following warnings
are shown and module symbols are missing:

    proc/{kallsyms,modules} inconsistency while looking for
        "[sha1_s390]" module!

Command 'perf record' creates a list of module start addresses by
parsing the output of /proc/modules and creates a PERF_RECORD_MMAP
record for the kernel and each module. The following function call
sequence is executed:

  machine__create_kernel_maps
    machine__create_module
      modules__parse
        machine__create_module --> for each line in /proc/modules
          arch__fix_module_text_start

Function arch__fix_module_text_start() is s390 specific. It opens
file /sys/module/<name>/sections/.text to extract the module's .text
section start address. On s390 the module loader prepends a header
before the first section, whereas on x86 the module's text section
address is identical the the module's load address.

However module section files are root readable only. For non-root the
read operation fails and machine__create_module() returns an error.
Command perf record does not generate any PERF_RECORD_MMAP record
for loaded modules. Later command perf report complains about missing
module maps.

To fix this function arch__fix_module_text_start() always returns
success. For root users there is no change, for non-root users
the module's load address is used as module's text start address
(the prepended header then counts as part of the text section).

This enable non-root users to use module symbols and avoid the
warning when perf report is executed.

Output before:

  [tmricht@m83lp54 perf]$ ./perf report -D | fgrep MMAP
  0 0x168 [0x50]: PERF_RECORD_MMAP ... x [kernel.kallsyms]_text

Output after:

  [tmricht@m83lp54 perf]$ ./perf report -D | fgrep MMAP
  0 0x168 [0x50]: PERF_RECORD_MMAP ... x [kernel.kallsyms]_text
  0 0x1b8 [0x98]: PERF_RECORD_MMAP ... x /lib/modules/.../autofs4.ko.xz
  0 0x250 [0xa8]: PERF_RECORD_MMAP ... x /lib/modules/.../sha_common.ko.xz
  0 0x2f8 [0x98]: PERF_RECORD_MMAP ... x /lib/modules/.../des_generic.ko.xz
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Link: http://lkml.kernel.org/r/20190522144601.50763-4-tmricht@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 97acec7d ]

This strncat() is safe because the buffer was allocated with zalloc(),
however gcc doesn't know that. Since the string always has 4 non-null
bytes, just use memcpy() here.

    CC       /home/shawn/linux/tools/perf/util/data-convert-bt.o
  In file included from /usr/include/string.h:494,
                   from /home/shawn/linux/tools/lib/traceevent/event-parse.h:27,
                   from util/data-convert-bt.c:22:
  In function ‘strncat’,
      inlined from ‘string_set_value’ at util/data-convert-bt.c:274:4:
  /usr/include/powerpc64le-linux-gnu/bits/string_fortified.h:136:10: error: ‘__builtin_strncat’ output may be truncated copying 4 bytes from a string of length 4 [-Werror=stringop-truncation]
    136 |   return __builtin___strncat_chk (__dest, __src, __len, __bos (__dest));
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shawn Landden <shawn@git.icu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20190518183238.10954-1-shawn@git.icu
Link: https://lkml.kernel.org/n/tip-289f1jice17ta7tr3tstm9jm@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f6122ed2 ]

In the vfs_statx() context, during path lookup, the dentry gets
added to sd->s_dentry via configfs_attach_attr(). In the end,
vfs_statx() kills the dentry by calling path_put(), which invokes
configfs_d_iput(). Ideally, this dentry must be removed from
sd->s_dentry but it doesn't if the sd->s_count >= 3. As a result,
sd->s_dentry is holding reference to a stale dentry pointer whose
memory is already freed up. This results in use-after-free issue,
when this stale sd->s_dentry is accessed later in
configfs_readdir() path.

This issue can be easily reproduced, by running the LTP test case -
sh fs_racer_file_list.sh /config
(https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/fs/racer/fs_racer_file_list.sh)

Fixes: 76ae281f ('configfs: fix race between dentry put and lookup')
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a0692f0e ]

If I2C_M_RECV_LEN check failed, msgs[i].buf allocated by memdup_user
will not be freed. Pump index up so it will be freed.

Fixes: 838bfa60 ("i2c-dev: Add support for I2C_M_RECV_LEN")
Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3e66b7cc ]

Building with Clang reports the redundant use of MODULE_DEVICE_TABLE():

drivers/net/ethernet/dec/tulip/de4x5.c:2110:1: error: redefinition of '__mod_eisa__de4x5_eisa_ids_device_table'
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table               \
                    ^
<scratch space>:90:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^
drivers/net/ethernet/dec/tulip/de4x5.c:2100:1: note: previous definition is here
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table               \
                    ^
<scratch space>:85:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^

This drops the one further from the table definition to match the common
use of MODULE_DEVICE_TABLE().

Fixes: 07563c71 ("EISA bus MODALIAS attributes support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e9646f0f ]

The gpio-adp5588 driver uses interfaces that are provided by
GPIOLIB_IRQCHIP, so select that symbol in its Kconfig entry.

Fixes these build errors:

../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_handler’:
../drivers/gpio/gpio-adp5588.c:266:26: error: ‘struct gpio_chip’ has no member named ‘irq’
            dev->gpio_chip.irq.domain, gpio));
                          ^
../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_setup’:
../drivers/gpio/gpio-adp5588.c:298:2: error: implicit declaration of function ‘gpiochip_irqchip_add_nested’ [-Werror=implicit-function-declaration]
  ret = gpiochip_irqchip_add_nested(&dev->gpio_chip,
  ^
../drivers/gpio/gpio-adp5588.c:307:2: error: implicit declaration of function ‘gpiochip_set_nested_irqchip’ [-Werror=implicit-function-declaration]
  gpiochip_set_nested_irqchip(&dev->gpio_chip,
  ^

Fixes: 459773ae ("gpio: adp5588-gpio: support interrupt controller")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3f9fbe9b ]

Similar to how decrementing rb->next too early can cause data_head to
(temporarily) be observed to go backward, so too can this happen when
we increment too late.

This barrier() ensures the rb->head load happens after the increment,
both the one in the 'goto again' path, as the one from
perf_output_get_handle() -- albeit very unlikely to matter for the
latter.
Suggested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mark.rutland@arm.com
Cc: namhyung@kernel.org
Fixes: ef60777c ("perf: Optimize the perf_output() path by removing IRQ-disables")
Link: http://lkml.kernel.org/r/20190517115418.309516009@infradead.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1b038c6e ]

In perf_output_put_handle(), an IRQ/NMI can happen in below location and
write records to the same ring buffer:

	...
	local_dec_and_test(&rb->nest)
	...                          <-- an IRQ/NMI can happen here
	rb->user_page->data_head = head;
	...

In this case, a value A is written to data_head in the IRQ, then a value
B is written to data_head after the IRQ. And A > B. As a result,
data_head is temporarily decreased from A to B. And a reader may see
data_head < data_tail if it read the buffer frequently enough, which
creates unexpected behaviors.

This can be fixed by moving dec(&rb->nest) to after updating data_head,
which prevents the IRQ/NMI above from updating data_head.

[ Split up by peterz. ]
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: mark.rutland@arm.com
Fixes: ef60777c ("perf: Optimize the perf_output() path by removing IRQ-disables")
Link: http://lkml.kernel.org/r/20190517115418.224478157@infradead.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2ac44ab6 ]

For F17h AMD CPUs, the CPB capability ('Core Performance Boost') is forcibly set,
because some versions of that chip incorrectly report that they do not have it.

However, a hypervisor may filter out the CPB capability, for good
reasons. For example, KVM currently does not emulate setting the CPB
bit in MSR_K7_HWCR, and unchecked MSR access errors will be thrown
when trying to set it as a guest:

	unchecked MSR access error: WRMSR to 0xc0010015 (tried to write 0x0000000001000011) at rIP: 0xffffffff890638f4 (native_write_msr+0x4/0x20)

	Call Trace:
	boost_set_msr+0x50/0x80 [acpi_cpufreq]
	cpuhp_invoke_callback+0x86/0x560
	sort_range+0x20/0x20
	cpuhp_thread_fun+0xb0/0x110
	smpboot_thread_fn+0xef/0x160
	kthread+0x113/0x130
	kthread_create_worker_on_cpu+0x70/0x70
	ret_from_fork+0x35/0x40

To avoid this issue, don't forcibly set the CPB capability for a CPU
when running under a hypervisor.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: jiaxun.yang@flygoat.com
Fixes: 02371991 ("x86/CPU/AMD: Set the CPB bit unconditionally on F17h")
Link: http://lkml.kernel.org/r/20190522221745.GA15789@dev-dsk-fllinden-2c-c1893d73.us-west-2.amazon.com
[ Minor edits to the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ccfb62f2 ]

The user can change the device_name with the IMSETDEVNAME ioctl, but we
need to ensure that the user's name is NUL terminated.  Otherwise it
could result in a buffer overflow when we copy the name back to the user
with IMGETDEVINFO ioctl.

I also changed two strcpy() calls which handle the name to strscpy().
Hopefully, there aren't any other ways to create a too long name, but
it's nice to do this as a kernel hardening measure.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 82ce6eb1 ]

A test for the basic NAT functionality uses ip command which needs veth
device. There is a condition where the kernel support for veth is not
compiled into the kernel and the test script breaks. This patch contains
code for reasonable error display and correct code exit.
Signed-off-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 23e3983a ]

This patch fixes an bug revealed by the following commit:

  6b89d4c1 ("perf/x86/intel: Fix INTEL_FLAGS_EVENT_CONSTRAINT* masking")

That patch modified INTEL_FLAGS_EVENT_CONSTRAINT() to only look at the event code
when matching a constraint. If code+umask were needed, then the
INTEL_FLAGS_UEVENT_CONSTRAINT() macro was needed instead.
This broke with some of the constraints for PEBS events.

Several of them, including the one used for cycles:p, cycles:pp, cycles:ppp
fell in that category and caused the event to be rejected in PEBS mode.
In other words, on some platforms a cmdline such as:

  $ perf top -e cycles:pp

would fail with -EINVAL.

This patch fixes this bug by properly using INTEL_FLAGS_UEVENT_CONSTRAINT()
when needed in the PEBS constraint tables.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/20190521005246.423-1-eranian@google.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

This reverts commit cf07331c which was
commit ca641bae upstream.

Martin writes:
	This commit breaks the kernel build because the vchiq_pagelist_info
	struct is not defined in v4.9.182.

	It was only added in v4.10, in commit
	4807f2c0.
Reported-by: Martin Weinelt <martin@linuxlounge.net>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 07a6d63e ]

In d5a2aa24, the name in struct console sunhv_console was changed from "ttyS"
to "ttyHV" while the name in struct uart_ops sunhv_pops remained unchanged.

This results in the hypervisor console device to be listed as "ttyHV0" under
/proc/consoles while the device node is still named "ttyS0":

root@osaka:~# cat /proc/consoles
ttyHV0               -W- (EC p  )    4:64
tty0                 -WU (E     )    4:1
root@osaka:~# readlink /sys/dev/char/4:64
../../devices/root/f02836f0/f0285690/tty/ttyS0
root@osaka:~#

This means that any userland code which tries to determine the name of the
device file of the hypervisor console device can not rely on the information
provided by /proc/consoles. In particular, booting current versions of debian-
installer inside a SPARC LDOM will fail with the installer unable to determine
the console device.

After renaming the device in struct uart_ops sunhv_pops to "ttyHV" as well,
the inconsistency is fixed and it is possible again to determine the name
of the device file of the hypervisor console device by reading the contents
of /proc/console:

root@osaka:~# cat /proc/consoles
ttyHV0               -W- (EC p  )    4:64
tty0                 -WU (E     )    4:1
root@osaka:~# readlink /sys/dev/char/4:64
../../devices/root/f02836f0/f0285690/tty/ttyHV0
root@osaka:~#

With this change, debian-installer works correctly when installing inside
a SPARC LDOM.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f3e92cb8 ]

Nine years ago, I added RCU handling to neighbours, not pneighbours.
(pneigh are not commonly used)

Unfortunately I missed that /proc dump operations would use a
common entry and exit point : neigh_seq_start() and neigh_seq_stop()

We need to read_lock(tbl->lock) or risk use-after-free while
iterating the pneigh structures.

We might later convert pneigh to RCU and revert this patch.

sysbot reported :

BUG: KASAN: use-after-free in pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
Read of size 8 at addr ffff888097f2a700 by task syz-executor.0/9825

CPU: 1 PID: 9825 Comm: syz-executor.0 Not tainted 5.2.0-rc4+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188
 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 kasan_report+0x12/0x20 mm/kasan/common.c:614
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132
 pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
 neigh_seq_next+0xdb/0x210 net/core/neighbour.c:3240
 seq_read+0x9cf/0x1110 fs/seq_file.c:258
 proc_reg_read+0x1fc/0x2c0 fs/proc/inode.c:221
 do_loop_readv_writev fs/read_write.c:714 [inline]
 do_loop_readv_writev fs/read_write.c:701 [inline]
 do_iter_read+0x4a4/0x660 fs/read_write.c:935
 vfs_readv+0xf0/0x160 fs/read_write.c:997
 kernel_readv fs/splice.c:359 [inline]
 default_file_splice_read+0x475/0x890 fs/splice.c:414
 do_splice_to+0x127/0x180 fs/splice.c:877
 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:954
 do_splice_direct+0x1da/0x2a0 fs/splice.c:1063
 do_sendfile+0x597/0xd00 fs/read_write.c:1464
 __do_sys_sendfile64 fs/read_write.c:1525 [inline]
 __se_sys_sendfile64 fs/read_write.c:1511 [inline]
 __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511
 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4592c9
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f4aab51dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000004592c9
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005
RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000246 R12: 00007f4aab51e6d4
R13: 00000000004c689d R14: 00000000004db828 R15: 00000000ffffffff

Allocated by task 9827:
 save_stack+0x23/0x90 mm/kasan/common.c:71
 set_track mm/kasan/common.c:79 [inline]
 __kasan_kmalloc mm/kasan/common.c:489 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503
 __do_kmalloc mm/slab.c:3660 [inline]
 __kmalloc+0x15c/0x740 mm/slab.c:3669
 kmalloc include/linux/slab.h:552 [inline]
 pneigh_lookup+0x19c/0x4a0 net/core/neighbour.c:731
 arp_req_set_public net/ipv4/arp.c:1010 [inline]
 arp_req_set+0x613/0x720 net/ipv4/arp.c:1026
 arp_ioctl+0x652/0x7f0 net/ipv4/arp.c:1226
 inet_ioctl+0x2a0/0x340 net/ipv4/af_inet.c:926
 sock_do_ioctl+0xd8/0x2f0 net/socket.c:1043
 sock_ioctl+0x3ed/0x780 net/socket.c:1194
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0xd5f/0x1380 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 9824:
 save_stack+0x23/0x90 mm/kasan/common.c:71
 set_track mm/kasan/common.c:79 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:451
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:459
 __cache_free mm/slab.c:3432 [inline]
 kfree+0xcf/0x220 mm/slab.c:3755
 pneigh_ifdown_and_unlock net/core/neighbour.c:812 [inline]
 __neigh_ifdown+0x236/0x2f0 net/core/neighbour.c:356
 neigh_ifdown+0x20/0x30 net/core/neighbour.c:372
 arp_ifdown+0x1d/0x21 net/ipv4/arp.c:1274
 inetdev_destroy net/ipv4/devinet.c:319 [inline]
 inetdev_event+0xa14/0x11f0 net/ipv4/devinet.c:1544
 notifier_call_chain+0xc2/0x230 kernel/notifier.c:95
 __raw_notifier_call_chain kernel/notifier.c:396 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:403
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1749
 call_netdevice_notifiers_extack net/core/dev.c:1761 [inline]
 call_netdevice_notifiers net/core/dev.c:1775 [inline]
 rollback_registered_many+0x9b9/0xfc0 net/core/dev.c:8178
 rollback_registered+0x109/0x1d0 net/core/dev.c:8220
 unregister_netdevice_queue net/core/dev.c:9267 [inline]
 unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9260
 unregister_netdevice include/linux/netdevice.h:2631 [inline]
 __tun_detach+0xd8a/0x1040 drivers/net/tun.c:724
 tun_detach drivers/net/tun.c:741 [inline]
 tun_chr_close+0xe0/0x180 drivers/net/tun.c:3451
 __fput+0x2ff/0x890 fs/file_table.c:280
 ____fput+0x16/0x20 fs/file_table.c:313
 task_work_run+0x145/0x1c0 kernel/task_work.c:113
 tracehook_notify_resume include/linux/tracehook.h:185 [inline]
 exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:168
 prepare_exit_to_usermode arch/x86/entry/common.c:199 [inline]
 syscall_return_slowpath arch/x86/entry/common.c:279 [inline]
 do_syscall_64+0x58e/0x680 arch/x86/entry/common.c:304
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff888097f2a700
 which belongs to the cache kmalloc-64 of size 64
The buggy address is located 0 bytes inside of
 64-byte region [ffff888097f2a700, ffff888097f2a740)
The buggy address belongs to the page:
page:ffffea00025fca80 refcount:1 mapcount:0 mapping:ffff8880aa400340 index:0x0
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea000250d548 ffffea00025726c8 ffff8880aa400340
raw: 0000000000000000 ffff888097f2a000 0000000100000020 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888097f2a600: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
 ffff888097f2a680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff888097f2a700: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
                   ^
 ffff888097f2a780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff888097f2a800: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc

Fixes: 767e97e1 ("neigh: RCU conversion of struct neighbour")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 6be8e297 ]

lapb_register calls lapb_create_cb, which initializes the control-
block's ref-count to one, and __lapb_insert_cb, which increments it when
adding the new block to the list of blocks.

lapb_unregister calls __lapb_remove_cb, which decrements the ref-count
when removing control-block from the list of blocks, and calls lapb_put
itself to decrement the ref-count before returning.

However, lapb_unregister also calls __lapb_devtostruct to look up the
right control-block for the given net_device, and __lapb_devtostruct
also bumps the ref-count, which means that when lapb_unregister returns
the ref-count is still 1 and the control-block is leaked.

Call lapb_put after __lapb_devtostruct to fix leak.

Reported-by: syzbot+afb980676c836b4a0afa@syzkaller.appspotmail.com
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 65a3c497 ]

Before taking a refcount, make sure the object is not already
scheduled for deletion.

Same fix is needed in ipv6_flowlabel_opt()

Fixes: 18367681 ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 718f4a25 ]

Number of Rx queues used for flow hashing returned by the driver is
incorrect and this bug prevents user to use the last Rx queue in
indirection table.

Let's say we have a NIC with 6 combined queues:

[root@sm-03 ~]# ethtool -l enp4s0f0
Channel parameters for enp4s0f0:
Pre-set maximums:
RX:             5
TX:             5
Other:          0
Combined:       6
Current hardware settings:
RX:             0
TX:             0
Other:          0
Combined:       6

Default indirection table maps all (6) queues equally but the driver
reports only 5 rings available.

[root@sm-03 ~]# ethtool -x enp4s0f0
RX flow hash indirection table for enp4s0f0 with 5 RX ring(s):
    0:      0     1     2     3     4     5     0     1
    8:      2     3     4     5     0     1     2     3
   16:      4     5     0     1     2     3     4     5
   24:      0     1     2     3     4     5     0     1
...

Now change indirection table somehow:

[root@sm-03 ~]# ethtool -X enp4s0f0 weight 1 1
[root@sm-03 ~]# ethtool -x enp4s0f0
RX flow hash indirection table for enp4s0f0 with 6 RX ring(s):
    0:      0     0     0     0     0     0     0     0
...
   64:      1     1     1     1     1     1     1     1
...

Now it is not possible to change mapping back to equal (default) state:

[root@sm-03 ~]# ethtool -X enp4s0f0 equal 6
Cannot set RX flow hash configuration: Invalid argument

Fixes: 594ad54a ("be2net: Add support for setting and getting rx flow hash options")
Reported-by: Tianhao <tizhao@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d4d5d8e8 ]

Before thread in process context uses bh_lock_sock()
we must disable bh.

sysbot reported :

WARNING: inconsistent lock state
5.2.0-rc3+ #32 Not tainted

inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
blkid/26581 [HC0[0]:SC1[1]:HE1:SE0] takes:
00000000e0da85ee (slock-AF_AX25){+.?.}, at: spin_lock include/linux/spinlock.h:338 [inline]
00000000e0da85ee (slock-AF_AX25){+.?.}, at: ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275
{SOFTIRQ-ON-W} state was registered at:
  lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303
  __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
  _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
  spin_lock include/linux/spinlock.h:338 [inline]
  ax25_rt_autobind+0x3ca/0x720 net/ax25/ax25_route.c:429
  ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1221
  __sys_connect+0x264/0x330 net/socket.c:1834
  __do_sys_connect net/socket.c:1845 [inline]
  __se_sys_connect net/socket.c:1842 [inline]
  __x64_sys_connect+0x73/0xb0 net/socket.c:1842
  do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
irq event stamp: 2272
hardirqs last  enabled at (2272): [<ffffffff810065f3>] trace_hardirqs_on_thunk+0x1a/0x1c
hardirqs last disabled at (2271): [<ffffffff8100660f>] trace_hardirqs_off_thunk+0x1a/0x1c
softirqs last  enabled at (1522): [<ffffffff87400654>] __do_softirq+0x654/0x94c kernel/softirq.c:320
softirqs last disabled at (2267): [<ffffffff81449010>] invoke_softirq kernel/softirq.c:374 [inline]
softirqs last disabled at (2267): [<ffffffff81449010>] irq_exit+0x180/0x1d0 kernel/softirq.c:414

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(slock-AF_AX25);
  <Interrupt>
    lock(slock-AF_AX25);

 *** DEADLOCK ***

1 lock held by blkid/26581:
 #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:175 [inline]
 #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: call_timer_fn+0xe0/0x720 kernel/time/timer.c:1312

stack backtrace:
CPU: 1 PID: 26581 Comm: blkid Not tainted 5.2.0-rc3+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_usage_bug.cold+0x393/0x4a2 kernel/locking/lockdep.c:2935
 valid_state kernel/locking/lockdep.c:2948 [inline]
 mark_lock_irq kernel/locking/lockdep.c:3138 [inline]
 mark_lock+0xd46/0x1370 kernel/locking/lockdep.c:3513
 mark_irqflags kernel/locking/lockdep.c:3391 [inline]
 __lock_acquire+0x159f/0x5490 kernel/locking/lockdep.c:3745
 lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303
 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
 _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
 spin_lock include/linux/spinlock.h:338 [inline]
 ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275
 call_timer_fn+0x193/0x720 kernel/time/timer.c:1322
 expire_timers kernel/time/timer.c:1366 [inline]
 __run_timers kernel/time/timer.c:1685 [inline]
 __run_timers kernel/time/timer.c:1653 [inline]
 run_timer_softirq+0x66f/0x1740 kernel/time/timer.c:1698
 __do_softirq+0x25c/0x94c kernel/softirq.c:293
 invoke_softirq kernel/softirq.c:374 [inline]
 irq_exit+0x180/0x1d0 kernel/softirq.c:414
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0x13b/0x550 arch/x86/kernel/apic/apic.c:1068
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:806
 </IRQ>
RIP: 0033:0x7f858d5c3232
Code: 8b 61 08 48 8b 84 24 d8 00 00 00 4c 89 44 24 28 48 8b ac 24 d0 00 00 00 4c 8b b4 24 e8 00 00 00 48 89 7c 24 68 48 89 4c 24 78 <48> 89 44 24 58 8b 84 24 e0 00 00 00 89 84 24 84 00 00 00 8b 84 24
RSP: 002b:00007ffcaf0cf5c0 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
RAX: 00007f858d7d27a8 RBX: 00007f858d7d8820 RCX: 00007f858d3940d8
RDX: 00007ffcaf0cf798 RSI: 00000000f5e616f3 RDI: 00007f858d394fee
RBP: 0000000000000000 R08: 00007ffcaf0cf780 R09: 00007f858d7db480
R10: 0000000000000000 R11: 0000000009691a75 R12: 0000000000000005
R13: 00000000f5e616f3 R14: 0000000000000000 R15: 00007ffcaf0cf798
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ecb4a353 upstream.

The RTC_VL_READ ioctl reports the low battery condition. Still,
pcf8523_rtc_read_time() happily returns invalid dates in this case.
Check the battery health on pcf8523_rtc_read_time() to avoid that.
Reported-by: Erik Čuk <erik.cuk@domel.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f3dfd407 upstream.

Added support for Telit LE910Cx 0x1260 and 0x1261 compositions.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5417a7e4 upstream.

Added IDs for Simcom SIM7500/SIM7600 series cellular module in RNDIS
mode. Reserved the interface for ADB.

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1e0e ProdID=9011 Rev=03.18
S:  Manufacturer=SimTech, Incorporated
S:  Product=SimTech, Incorporated
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
I:  If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c5f81656 upstream.

This is adds the vendor and device id for the AT-VT-Kit3 which is a
pl2303-based device.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1a6dd3fe upstream.

There is one more Realtek card reader requires ums-realtek to work
correctly.

Add the device ID to support it.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bd21f022 upstream.

This patch fixes the chipmunk-like voice that manifets randomly when
using the integrated mic of the Logitech Webcam HD C270.

The issue was solved initially for this device by commit 2394d67e
("USB: add RESET_RESUME for webcams shown to be quirky") but it was then
reintroduced by e387ef5c ("usb: Add USB_QUIRK_RESET_RESUME for all
Logitech UVC webcams"). This patch is to have the fix back.
Signed-off-by: Marco Zatta <marco@zatta.me>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4a4863bf upstream.

Insert a padding between data and the stored_xfer_buffer pointer to
ensure they are not on the same cache line.

Otherwise, the stored_xfer_buffer gets corrupted for IN URBs on
non-cache-coherent systems. (In my case: Lantiq xRX200 MIPS)

Fixes: 3bc04e28 ("usb: dwc2: host: Get aligned DMA in a more supported way")
Fixes: 56406e01 ("usb: dwc2: Fix DMA alignment to start at allocated boundary")
Cc: <stable@vger.kernel.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bcd6aa7b upstream.

If SVGA_3D_CMD_DX_DEFINE_RENDERTARGET_VIEW is called with a surface
ID of SVGA3D_INVALID_ID, the srf struct will remain NULL after
vmw_cmd_res_check(), leading to a null pointer dereference in
vmw_view_add().

Cc: <stable@vger.kernel.org>
Fixes: d80efd5c ("drm/vmwgfx: Initial DX support")
Signed-off-by: Murray McAllister <murray.mcallister@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5ed7f4b5 upstream.

If SVGA_3D_CMD_DX_SET_SHADER is called with a shader ID
of SVGA3D_INVALID_ID, and a shader type of
SVGA3D_SHADERTYPE_INVALID, the calculated binding.shader_slot
will be 4294967295, leading to an out-of-bounds read in vmw_binding_loc()
when the offset is calculated.

Cc: <stable@vger.kernel.org>
Fixes: d80efd5c ("drm/vmwgfx: Initial DX support")
Signed-off-by: Murray McAllister <murray.mcallister@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 19ec166c ]

kselftests exposed a problem in the s390 handling for memory slots.
Right now we only do proper memory slot handling for creation of new
memory slots. Neither MOVE, nor DELETION are handled properly. Let us
implement those.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2924b521 ]

According to the SDM, for MSR_IA32_PERFCTR0/1 "the lower-order 32 bits of
each MSR may be written with any value, and the high-order 8 bits are
sign-extended according to the value of bit 31", but the fixed counters
in real hardware are limited to the width of the fixed counters ("bits
beyond the width of the fixed-function counter are reserved and must be
written as zeros").  Fix KVM to do the same.
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 94d250fa ]

Fix a racing condition in ipheth.c that can lead to slow performance.

Bug: In ipheth_tx(), netif_wake_queue() may be called on the callback
ipheth_sndbulk_callback(), _before_ netif_stop_queue() is called.
When this happens, the queue is stopped longer than it needs to be,
thus reducing network performance.

Fix: Move netif_stop_queue() in front of usb_submit_urb(). Now the order
is always correct. In case, usb_submit_urb() fails, the queue is woken up
again as callback will not fire.

Testing: This racing condition is usually not noticeable, as it has to
occur very frequently to slowdown the network. The callback from the USB
is usually triggered slow enough, so the situation does not appear.
However, on a Ubuntu Linux on VMWare Workstation, running on Windows 10,
the we loose the race quite often and the following speedup can be noticed:

Without this patch: Download:  4.10 Mbit/s, Upload:  4.01 Mbit/s
With this patch:    Download: 36.23 Mbit/s, Upload: 17.61 Mbit/s
Signed-off-by: Oliver Zweigle <Oliver.Zweigle@faro.com>
Signed-off-by: Bernd Eckstein <3ernd.Eckstein@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fe483192 ]

When running under a pipe, some timer tests would not report output in
real-time because stdout flushes were missing after printf()s that lacked
a newline. This adds them to restore real-time status output that humans
can enjoy.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d0c0d902 ]

Currently an int is being shifted and the result is being cast to a u64
which leads to undefined behaviour if the shift is more than 31 bits. Fix
this by casting the integer value 1 to u64 before the shift operation.

Addresses-Coverity: ("Bad shift operation")
Fixes: 7b594769 ("[SCSI] bnx2fc: Handle REC_TOV error code from firmware")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7ba36ecc ]

The arm64 ptdump code can race with concurrent modification of the
kernel page tables. At the time this was added, this was sound as:

* Modifications to leaf entries could result in stale information being
  logged, but would not result in a functional problem.

* Boot time modifications to non-leaf entries (e.g. freeing of initmem)
  were performed when the ptdump code cannot be invoked.

* At runtime, modifications to non-leaf entries only occurred in the
  vmalloc region, and these were strictly additive, as intermediate
  entries were never freed.

However, since commit:

  commit 324420bf ("arm64: add support for ioremap() block mappings")

... it has been possible to create huge mappings in the vmalloc area at
runtime, and as part of this existing intermediate levels of table my be
removed and freed.

It's possible for the ptdump code to race with this, and continue to
walk tables which have been freed (and potentially poisoned or
reallocated). As a result of this, the ptdump code may dereference bogus
addresses, which could be fatal.

Since huge-vmap is a TLB and memory optimization, we can disable it when
the runtime ptdump code is in use to avoid this problem.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 324420bf ("arm64: add support for ioremap() block mappings")
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c8cb261a ]

There was a missing qualification of a valid ndlp structure when calling to
send an RRQ for an abort.  Add the check.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b281218a ]

There is an out-of-bounds access to "config[len - 1]" array when the
variable "len" is zero.

See commit dada6a43 ("kgdboc: fix KASAN global-out-of-bounds bug
in param_set_kgdboc_var()") for details.
Signed-off-by: Young Xiao <YangX92@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f0654ba9 ]

This reverts commit feb68902.

The fix attempt was incorrect, leading to the mutex deadlock through
the close of OSS sequencer client.  The proper fix needs more
consideration, so let's revert it now.

Fixes: feb68902 ("ALSA: seq: Protect in-kernel ioctl calls with mutex")
Reported-by: syzbot+47ded6c0f23016cde310@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2eabc5ec ]

The snd_seq_ioctl_get_subscription() retrieves the port subscriber
information as a pointer, while the object isn't protected, hence it
may be deleted before the actual reference.  This race was spotted by
syzkaller and may lead to a UAF.

The fix is simply copying the data in the lookup function that
performs in the rwsem to protect against the deletion.

Reported-by: syzbot+9437020c82413d00222d@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit feb68902 ]

ALSA OSS sequencer calls the ioctl function indirectly via
snd_seq_kernel_client_ctl().  While we already applied the protection
against races between the normal ioctls and writes via the client's
ioctl_mutex, this code path was left untouched.  And this seems to be
the cause of still remaining some rare UAF as spontaneously triggered
by syzkaller.

For the sake of robustness, wrap the ioctl_mutex also for the call via
snd_seq_kernel_client_ctl(), too.

Reported-by: syzbot+e4c8abb920efa77bace9@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 40ea9729 ]

New tooling noticed this mishap:

  kernel/kcov.o: warning: objtool: write_comp_data()+0x138: call to __stack_chk_fail() with UACCESS enabled
  kernel/kcov.o: warning: objtool: __sanitizer_cov_trace_pc()+0xd9: call to __stack_chk_fail() with UACCESS enabled

All the other instrumentation (KASAN,UBSAN) also have stack protector
disabled.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>