This was actually never really used, and the info it
prints won't help. Drop it.
Signed-off-by: Helge Deller <deller@gmx.de>

Prefer the Linux kernel sys_off_handler functionality over a
home-grown implementation.
Signed-off-by: Helge Deller <deller@gmx.de>

Pull tty/serial fixes from Greg KH:
 "Here are some small tty and serial core fixes for 6.5-rc7 that resolve
  a lot of reported issues.

  Primarily in here are the fixes for the serial bus code from Tony that
  came in -rc1, as it hit wider testing with the huge number of
  different types of systems and serial ports. All of the reported
  issues with duplicate names and other issues with this code are now
  resolved.

  Other than that included in here is:

   - n_gsm fix for a previous fix

   - 8250 lockdep annotation fix

   - fsl_lpuart serial driver fix

   - TIOCSTI documentation update for previous CAP_SYS_ADMIN change

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: core: Fix serial core port id, including multiport devices
  serial: 8250: drop lockdep annotation from serial8250_clear_IER()
  tty: n_gsm: fix the UAF caused by race condition in gsm_cleanup_mux
  serial: core: Revert port_id use
  TIOCSTI: Document CAP_SYS_ADMIN behaviour in Kconfig
  serial: 8250: Fix oops for port->pm on uart_change_pm()
  serial: 8250: Reinit port_id when adding back serial8250_isa_devs
  serial: core: Fix kmemleak issue for serial core device remove
  MAINTAINERS: Merge TTY layer and serial drivers
  serial: core: Fix serial_base_match() after fixing controller port name
  serial: core: Fix serial core controller port name to show controller id
  serial: core: Fix serial core port id to not use port->line
  serial: core: Controller id cannot be negative
  tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms

Pull rust fix from Miguel Ojeda:

 - Macros: fix 'HAS_*' redefinition by the '#[vtable]' macro
   under conditional compilation

* tag 'rust-fixes-6.5-rc7' of https://github.com/Rust-for-Linux/linux:
  rust: macros: vtable: fix `HAS_*` redefinition (`gen_const_name`)

Pull i2c fixes from Wolfram Sang:
 "Usual set of driver fixes. A bit more than usual because I was
  unavailable for a while"

* tag 'i2c-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: bcm-iproc: Fix bcm_iproc_i2c_isr deadlock issue
  i2c: Update documentation to use .probe() again
  i2c: sun6i-p2wi: Fix an error message in probe()
  i2c: hisi: Only handle the interrupt of the driver's transfer
  i2c: tegra: Fix i2c-tegra DMA config option processing
  i2c: tegra: Fix failure during probe deferral cleanup
  i2c: designware: Handle invalid SMBus block data response length value
  i2c: designware: Correct length byte validation logic
  i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't work

Pull btrfs fixes from David Sterba:

 - fix infinite loop in readdir(), could happen in a big directory when
   files get renamed during enumeration

 - fix extent map handling of skipped pinned ranges

 - fix a corner case when handling ordered extent length

 - fix a potential crash when balance cancel races with pause

 - verify correct uuid when starting scrub or device replace

* tag 'for-6.5-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix incorrect splitting in btrfs_drop_extent_map_range
  btrfs: fix BUG_ON condition in btrfs_cancel_balance
  btrfs: only subtract from len_to_oe_boundary when it is tracking an extent
  btrfs: fix replace/scrub failure with metadata_uuid
  btrfs: fix infinite directory reads

Pull fbdev fixes and cleanups from Helge Deller:

 - various code cleanups in amifb, atmel_lcdfb, ssd1307fb, kyro and
   goldfishfb

* tag 'fbdev-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbdev: goldfishfb: Do not check 0 for platform_get_irq()
  fbdev: atmel_lcdfb: Remove redundant of_match_ptr()
  fbdev: kyro: Remove unused declarations
  fbdev: ssd1307fb: Print the PWM's label instead of its number
  fbdev: mmp: fix value check in mmphw_probe()
  fbdev: amifb: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper

Pull block fixes from Jens Axboe:
 "Main thing here is the fix for the regression in flush handling which
  caused IO hangs/stalls for a few reporters. Hopefully that should all
  be sorted out now. Outside of that, just a few minor fixes for issues
  that were introduced in this cycle"

* tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linux:
  blk-mq: release scheduler resource when request completes
  blk-crypto: dynamically allocate fallback profile
  blk-cgroup: hold queue_lock when removing blkg->q_node
  drivers/rnbd: restore sysfs interface to rnbd-client

Chuck reported [1] an IO hang problem on NFS exports that reside on SATA
devices and bisected to commit 615939a2 ("blk-mq: defer to the normal
submission path for post-flush requests").

We analysed the IO hang problem, found there are two postflush requests
waiting for each other.

The first postflush request completed the REQ_FSEQ_DATA sequence, so go to
the REQ_FSEQ_POSTFLUSH sequence and added in the flush pending list, but
failed to blk_kick_flush() because of the second postflush request which
is inflight waiting in scheduler queue.

The second postflush waiting in scheduler queue can't be dispatched because
the first postflush hasn't released scheduler resource even though it has
completed by itself.

Fix it by releasing scheduler resource when the first postflush request
completed, so the second postflush can be dispatched and completed, then
make blk_kick_flush() succeed.

While at it, remove the check for e->ops.finish_request, as all
schedulers set that. Reaffirm this requirement by adding a WARN_ON_ONCE()
at scheduler registration time, just like we do for insert_requests and
dispatch_request.

[1] https://lore.kernel.org/all/7A57C7AE-A51A-4254-888B-FE15CA21F9E9@oracle.com/

Link: https://lore.kernel.org/linux-block/20230819031206.2744005-1-chengming.zhou@linux.dev/Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202308172100.8ce4b853-oliver.sang@intel.com
Fixes: 615939a2 ("blk-mq: defer to the normal submission path for post-flush requests")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20230813152325.3017343-1-chengming.zhou@linux.dev
[axboe: folded in incremental fix and added tags]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull media fixes from Mauro Carvalho Chehab:
 "Three driver fixes"

* tag 'media/v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: imx: imx7-media-csi: Fix applying format constraints
  media: uvcvideo: Fix menu count handling for userspace XU mappings
  media: mtk-jpeg: Set platform driver data earlier

Pull x86 fixes from Borislav Petkov:
 "Extraordinary embargoed times call for extraordinary measures. That's
  why this week's x86/urgent branch is larger than usual, containing all
  the known fallout fixes after the SRSO mitigation got merged.

  I know, it is a bit late in the game but everyone who has reported a
  bug stemming from the SRSO pile, has tested that branch and has
  confirmed that it fixes their bug.

  Also, I've run it on every possible hardware I have and it is looking
  good. It is running on this very machine while I'm typing, for 2 days
  now without an issue. Famous last words...

   - Use LEA ...%rsp instead of ADD %rsp in the Zen1/2 SRSO return
     sequence as latter clobbers flags which interferes with fastop
     emulation in KVM, leading to guests freezing during boot

   - A fix for the DIV(0) quotient data leak on Zen1 to clear the
     divider buffers at the right time

   - Disable the SRSO mitigation on unaffected configurations as it got
     enabled there unnecessarily

   - Change .text section name to fix CONFIG_LTO_CLANG builds

   - Improve the optprobe indirect jmp check so that certain
     configurations can still be able to use optprobes at all

   - A serious and good scrubbing of the untraining routines by PeterZ:
      - Add proper speculation stopping traps so that objtool is happy
      - Adjust objtool to handle the new thunks
      - Make the thunk pointer assignable to the different untraining
        sequences at runtime, thus avoiding the alternative at the
        return thunk. It simplifies the code a bit too.
      - Add a entry_untrain_ret() main entry point which selects the
        respective untraining sequence
      - Rename things so that they're more clear
      - Fix stack validation with FRAME_POINTER=y builds

   - Fix static call patching to handle when a JMP to the return thunk
     is the last insn on the very last module memory page

   - Add more documentation about what each untraining routine does and
     why"

* tag 'x86_urgent_for_v6.5_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/srso: Correct the mitigation status when SMT is disabled
  x86/static_call: Fix __static_call_fixup()
  objtool/x86: Fixup frame-pointer vs rethunk
  x86/srso: Explain the untraining sequences a bit more
  x86/cpu/kvm: Provide UNTRAIN_RET_VM
  x86/cpu: Cleanup the untrain mess
  x86/cpu: Rename srso_(.*)_alias to srso_alias_\1
  x86/cpu: Rename original retbleed methods
  x86/cpu: Clean up SRSO return thunk mess
  x86/alternative: Make custom return thunk unconditional
  objtool/x86: Fix SRSO mess
  x86/cpu: Fix up srso_safe_ret() and __x86_return_thunk()
  x86/cpu: Fix __x86_return_thunk symbol type
  x86/retpoline,kprobes: Skip optprobe check for indirect jumps with retpolines and IBT
  x86/retpoline,kprobes: Fix position of thunk sections with CONFIG_LTO_CLANG
  x86/srso: Disable the mitigation on unaffected configurations
  x86/CPU/AMD: Fix the DIV(0) initial fix attempt
  x86/retpoline: Don't clobber RFLAGS during srso_safe_ret()

Pull powerpc fix from Michael Ellerman:

 - Fix hardened usercopy BUG when using /proc based firmware update
   interface

Thanks to Nathan Lynch and Kees Cook.

* tag 'powerpc-6.5-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/rtas_flash: allow user copy to flash block cache objects

blk_crypto_profile_init() calls lockdep_register_key(), which warns and
does not register if the provided memory is a static object.
blk-crypto-fallback currently has a static blk_crypto_profile and calls
blk_crypto_profile_init() thereupon, resulting in the warning and
failure to register.

Fortunately it is simple enough to use a dynamically allocated profile
and make lockdep function correctly.

Fixes: 2fb48d88 ("blk-crypto: use dynamic lock class for blk_crypto_profile::lock")
Cc: stable@vger.kernel.org
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230817141615.15387-1-sweettea-kernel@dorminy.meSigned-off-by: Jens Axboe <axboe@kernel.dk>

When blkg is removed from q->blkg_list from blkg_free_workfn(), queue_lock
has to be held, otherwise, all kinds of bugs(list corruption, hard lockup,
..) can be triggered from blkg_destroy_all().

Fixes: f1c006f1 ("blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()")
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: xiaoli feng <xifeng@redhat.com>
Cc: Chunyu Hu <chuhu@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230817141751.1128970-1-ming.lei@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Commit 137380c0 renamed 'rnbd-client' to 'rnbd_client', this changed
sysfs interface to /sys/devices/virtual/rnbd_client/ctl/map_device
from /sys/devices/virtual/rnbd-client/ctl/map_device.

CC: Ivan Orlov <ivan.orlov0322@gmail.com>
CC: "Md. Haris Iqbal" <haris.iqbal@ionos.com>
CC: Jack Wang <jinpu.wang@ionos.com>
Fixes: 137380c0 ("block/rnbd: make all 'class' structures const")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20230816022210.2501228-1-lizhijian@fujitsu.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull arm64 fixes from Catalin Marinas:
 "Two more SME fixes related to ptrace(): ensure that the SME is
  properly set up for the target thread and that the thread sees
  the ZT registers set via ptrace"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/ptrace: Ensure that the task sees ZT writes on first use
  arm64/ptrace: Ensure that SME is set up for target when writing SSVE state

Pull gpio fixes from Bartosz Golaszewski:

 - fix a regression in the sysfs interface

 - fix a reference counting bug that's been around for years

 - MAINTAINERS update

* tag 'gpio-fixes-for-v6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: fix reference leaks when removing GPIO chips still in use
  gpiolib: sysfs: Do unexport GPIO when user asks for it
  MAINTAINERS: add content regex for gpio-regmap

Pull smb client fix from Steve French:
 "A small SMB mount option fix, also for stable"

* tag '6.5-rc6-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: fix null auth

Pull RISC-V fixes from Palmer Dabbelt:

 - avoid excessive rejections from seccomp RET_ERRNO rules

 - compressed jal/jalr decoding fix

 - fixes for independent irq/softirq stacks on kernels built with
   CONFIG_FRAME_POINTER=n

 - avoid a hang handling uaccess fixups

 - another build fix for toolchain ISA strings, this time for Zicsr and
   Zifenci on old GNU toolchains

* tag 'riscv-for-linus-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Handle zicsr/zifencei issue between gcc and binutils
  riscv: uaccess: Return the number of bytes effectively not copied
  riscv: stack: Fixup independent softirq stack for CONFIG_FRAME_POINTER=n
  riscv: stack: Fixup independent irq stack for CONFIG_FRAME_POINTER=n
  riscv: correct riscv_insn_is_c_jr() and riscv_insn_is_c_jalr()
  riscv: entry: set a0 = -ENOSYS only when syscall != -1

Pull sound fixes from Takashi Iwai:
 "Slightly bigger than I wished, but here we go, a collection of fixes
  for 6.5.

  The only change in the core side is the ease for repeated ASoC error
  messages, and the rest are all pretty device-specific small fixes
  (including regression fixes) for ASoC Intel and HD-audio / USB-audio
  quirks"

* tag 'sound-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Remodified 3k pull low procedure
  ASoC: rt1308-sdw: fix random louder sound
  ALSA: hda/cs8409: Support new Dell Dolphin Variants
  ALSA: hda/realtek: Switch Dell Oasis models to use SPI
  ALSA: hda/realtek: Add quirks for HP G11 Laptops
  ASoC: meson: axg-tdm-formatter: fix channel slot allocation
  ASoC: SOF: ipc4-topology: Update the basecfg for copier earlier
  ASoC: SOF: intel: hda: Clean up link DMA for IPC3 during stop
  ASoC: Intel: sof-sdw-cs42142: fix for codec button mapping
  ASoC: Intel: sof-sdw: update jack detection quirk for LunarLake RVP
  ASoC: SOF: Fix incorrect use of sizeof in sof_ipc3_do_rx_work()
  ASoC: lower "no backend DAIs enabled for ... Port" log severity
  ASoC: rt5665: add missed regulator_bulk_disable
  ASoC: max98363: don't return on success reading revision ID
  ALSA: usb-audio: Add support for Mythware XA001AU capture and playback interfaces.
  ASoC: fsl: micfil: Use dual license micfil code

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix in_flight[issue_type] value error to properly manage requests

  MMC host:
   - wbsd: Fix double free in the probe error path
   - sunplus: Fix error path in probe
   - sdhci_f_sdh30: Fix order of function calls in sdhci_f_sdh30_remove"

* tag 'mmc-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: f-sdh30: fix order of function calls in sdhci_f_sdh30_remove
  mmc: sunplus: Fix error handling in spmmc_drv_probe()
  mmc: sunplus: fix return value check of mmc_add_host()
  mmc: wbsd: fix double mmc_free_host() in wbsd_init()
  mmc: block: Fix in_flight[issue_type] value error

Pull pin control fixes from Linus Walleij:
 "Fixes two issues with the Qualcomm SA8775P platform:

   - Some minor device tree binding flunky that is nice to iron out but
     more importantly:

   - Support the increased interrupt targets mask from 3 to 4 bits,
     making interrupts with higher (hardware) numbers work"

* tag 'pinctrl-v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: Add intr_target_width field to support increased number of interrupt targets
  dt-bindings: pinctrl: qcom,sa8775p-tlmm: add gpio function constant

Pull ARM SoC fixes from Arnd Bergmann:
 "As usual, mostly DT fixes for the major Arm platforms from Qualcomm
  and NXP, plus a bit for Rockchips and others:

  The qualcomm fixes mainly deal with their higher-end arm64 devices
  trees, fixing issues in L3 interconnect, crypto, thermal, UFS and a
  regression for the DSI phy.

  NXP i.MX has two correctness fixes for the 64-bit chips, dealing with
  the imx93 "anatop" module and the CSI interface. On the 32-bit side,
  there are functional fixes for RTC, display and SD card intefaces.

  Rockchip fixes are for wifi support on certain boards, a eMMC
  stability and DT build warnings.

  On TI OMAP, a regulator is described in DT to avoid problems with the
  ethernet phy initialization.

  The code changes include a missing MMIO serialization on OMAP, plus a
  few minor fixes on ASpeed and AMD/Zynq chips"

* tag 'soc-fixes-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
  ARM: dts: am335x-bone-common: Add vcc-supply for on-board eeprom
  ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board
  soc: aspeed: socinfo: Add kfree for kstrdup
  soc: aspeed: uart-routing: Use __sysfs_match_string
  ARM: dts: integrator: fix PCI bus dtc warnings
  arm64: dts: imx93: Fix anatop node size
  arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-names
  ARM: dts: imx: Set default tuning step for imx6sx usdhc
  arm64: dts: imx8mm: Drop CSI1 PHY reference clock configuration
  arm64: dts: imx8mn: Drop CSI1 PHY reference clock configuration
  ARM: dts: imx: Set default tuning step for imx7d usdhc
  ARM: dts: imx6: phytec: fix RTC interrupt level
  ARM: dts: imx6sx: Remove LDB endpoint
  arm64: dts: rockchip: Fix Wifi/Bluetooth on ROCK Pi 4 boards
  ARM: zynq: Explicitly include correct DT includes
  arm64: dts: qcom: sa8775p-ride: Update L4C parameters
  arm64: dts: rockchip: minor whitespace cleanup around '='
  arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+
  arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
  arm64: dts: rockchip: add missing space before { on indiedroid nova
  ...

Pull asm-generic regression fix from Arnd Bergmann:
 "Just one partial revert for a commit from the merge window that caused
  annoying behavior when building old kernels on arm64 hosts"

* tag 'asm-generic-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: partially revert "Unify uapi bitsperlong.h for arm64, riscv and loongarch"

In production we were seeing a variety of WARN_ON()'s in the extent_map
code, specifically in btrfs_drop_extent_map_range() when we have to call
add_extent_mapping() for our second split.

Consider the following extent map layout

	PINNED
	[0 16K)  [32K, 48K)

and then we call btrfs_drop_extent_map_range for [0, 36K), with
skip_pinned == true.  The initial loop will have

	start = 0
	end = 36K
	len = 36K

we will find the [0, 16k) extent, but since we are pinned we will skip
it, which has this code

	start = em_end;
	if (end != (u64)-1)
		len = start + len - em_end;

em_end here is 16K, so now the values are

	start = 16K
	len = 16K + 36K - 16K = 36K

len should instead be 20K.  This is a problem when we find the next
extent at [32K, 48K), we need to split this extent to leave [36K, 48k),
however the code for the split looks like this

	split->start = start + len;
	split->len = em_end - (start + len);

In this case we have

	em_end = 48K
	split->start = 16K + 36K       // this should be 16K + 20K
	split->len = 48K - (16K + 36K) // this overflows as 16K + 36K is 52K

and now we have an invalid extent_map in the tree that potentially
overlaps other entries in the extent map.  Even in the non-overlapping
case we will have split->start set improperly, which will cause problems
with any block related calculations.

We don't actually need len in this loop, we can simply use end as our
end point, and only adjust start up when we find a pinned extent we need
to skip.

Adjust the logic to do this, which keeps us from inserting an invalid
extent map.

We only skip_pinned in the relocation case, so this is relatively rare,
except in the case where you are running relocation a lot, which can
happen with auto relocation on.

Fixes: 55ef6899 ("Btrfs: Fix btrfs_drop_extent_cache for skip pinned case")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Specify how is SRSO mitigated when SMT is disabled. Also, correct the
SMT check for that.

Fixes: e9fbc47b ("x86/srso: Disable the mitigation on unaffected configurations")
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20230814200813.p5czl47zssuej7nv@treble

Pull networking fixes from Jakub Kicinski:
 "Including fixes from ipsec and netfilter.

  No known outstanding regressions.

  Fixes to fixes:

   - virtio-net: set queues after driver_ok, avoid a potential race
     added by recent fix

   - Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning
     when VLAN 0 is registered explicitly

   - nf_tables:
      - fix false-positive lockdep splat in recent fixes
      - don't fail inserts if duplicate has expired (fix test failures)
      - fix races between garbage collection and netns dismantle

  Current release - new code bugs:

   - mlx5: Fix mlx5_cmd_update_root_ft() error flow

  Previous releases - regressions:

   - phy: fix IRQ-based wake-on-lan over hibernate / power off

  Previous releases - always broken:

   - sock: fix misuse of sk_under_memory_pressure() preventing system
     from exiting global TCP memory pressure if a single cgroup is under
     pressure

   - fix the RTO timer retransmitting skb every 1ms if linear option is
     enabled

   - af_key: fix sadb_x_filter validation, amment netlink policy

   - ipsec: fix slab-use-after-free in decode_session6()

   - macb: in ZynqMP resume always configure PS GTR for non-wakeup
     source

  Misc:

   - netfilter: set default timeout to 3 secs for sctp shutdown send and
     recv state (from 300ms), align with protocol timers"

* tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
  ice: Block switchdev mode when ADQ is active and vice versa
  qede: fix firmware halt over suspend and resume
  net: do not allow gso_size to be set to GSO_BY_FRAGS
  sock: Fix misuse of sk_under_memory_pressure()
  sfc: don't fail probe if MAE/TC setup fails
  sfc: don't unregister flow_indr if it was never registered
  net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset
  net/mlx5: Fix mlx5_cmd_update_root_ft() error flow
  net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT
  i40e: fix misleading debug logs
  iavf: fix FDIR rule fields masks validation
  ipv6: fix indentation of a config attribute
  mailmap: add entries for Simon Horman
  broadcom: b44: Use b44_writephy() return value
  net: openvswitch: reject negative ifindex
  team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves
  net: phy: broadcom: stub c45 read/write for 54810
  netfilter: nft_dynset: disallow object maps
  netfilter: nf_tables: GC transaction race with netns dismantle
  netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path
  ...

Pull drm fixes from Dave Airlie:
 "Regular enough week, mostly the usual amdgpu and i915 fixes.  Also
  qaic, nouveau, qxl and a revert for an EDID patch that had some side
  effects, along with a couple of panel fixes.

  edid:
   - revert mode parsing fix that had side effects.

  i915:
   - Fix the flow for ignoring GuC SLPC efficient frequency selection
   - Fix SDVO panel_type initialization
   - Fix display probe for IVB Q and IVB D GT2 server

  nouveau:
   - fix use-after-free in connector code

  qaic:
   - integer overflow check fix
   - fix slicing memory leak

  panel:
   - fix JDI LT070ME05000 probing
   - fix AUO G121EAN01 timings

  amdgpu:
   - SMU 13.x fixes
   - Fix mcbp parameter for gfx9
   - SMU 11.x fixes
   - Temporary fix for large numbers of XCP partitions
   - S0ix fixes
   - DCN 2.0 fix

  qxl:
   - fix use after free race in dumb object allocation"

* tag 'drm-fixes-2023-08-18-1' of git://anongit.freedesktop.org/drm/drm:
  drm/qxl: fix UAF on handle creation
  Revert "drm/edid: Fix csync detailed mode parsing"
  drm/nouveau/disp: fix use-after-free in error handling of nouveau_connector_create
  Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
  drm/amd: flush any delayed gfxoff on suspend entry
  drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
  drm/amdgpu: skip xcp drm device allocation when out of drm resource
  drm/amd/pm: Update pci link width for smu v13.0.6
  drm/amd/pm: Fix temperature unit of SMU v13.0.6
  drm/amdgpu/pm: fix throttle_status for other than MP1 11.0.7
  drm/amdgpu: disable mcbp if parameter zero is set
  drm/amd/pm: disallow the fan setting if there is no fan on smu 13.0.0
  accel/qaic: Clean up integer overflow checking in map_user_pages()
  accel/qaic: Fix slicing memory leak
  drm/i915: fix display probe for IVB Q and IVB D GT2 server
  drm/i915/sdvo: fix panel_type initialization
  drm/i915/guc/slpc: Restore efficient freq earlier
  drm/panel: simple: Fix AUO G121EAN01 panel timings according to the docs
  drm/panel: JDI LT070ME05000 simplify with dev_err_probe()

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-08-16 (iavf, i40e)

This series contains updates to iavf and i40e drivers.

Piotr adds checks for unsupported Flow Director rules on iavf.

Andrii replaces incorrect 'write' messaging on read operations for i40e.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  i40e: fix misleading debug logs
  iavf: fix FDIR rule fields masks validation
====================

Link: https://lore.kernel.org/r/20230816193308.1307535-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

qxl_mode_dumb_create() dereferences the qobj returned by
qxl_gem_object_create_with_handle(), but the handle is the only one
holding a reference to it.

A potential attacker could guess the returned handle value and closes it
between the return of qxl_gem_object_create_with_handle() and the qobj
usage, triggering a use-after-free scenario.

Reproducer:

int dri_fd =-1;
struct drm_mode_create_dumb arg = {0};

void gem_close(int handle);

void* trigger(void* ptr)
{
	int ret;
	arg.width = arg.height = 0x20;
	arg.bpp = 32;
	ret = ioctl(dri_fd, DRM_IOCTL_MODE_CREATE_DUMB, &arg);
	if(ret)
	{
		perror("[*] DRM_IOCTL_MODE_CREATE_DUMB Failed");
		exit(-1);
	}
	gem_close(arg.handle);
	while(1) {
		struct drm_mode_create_dumb args = {0};
		args.width = args.height = 0x20;
		args.bpp = 32;
		ret = ioctl(dri_fd, DRM_IOCTL_MODE_CREATE_DUMB, &args);
		if (ret) {
			perror("[*] DRM_IOCTL_MODE_CREATE_DUMB Failed");
			exit(-1);
		}

		printf("[*] DRM_IOCTL_MODE_CREATE_DUMB created, %d\n", args.handle);
		gem_close(args.handle);
	}
	return NULL;
}

void gem_close(int handle)
{
	struct drm_gem_close args;
	args.handle = handle;
	int ret = ioctl(dri_fd, DRM_IOCTL_GEM_CLOSE, &args); // gem close handle
	if (!ret)
		printf("gem close handle %d\n", args.handle);
}

int main(void)
{
	dri_fd= open("/dev/dri/card0", O_RDWR);
	printf("fd:%d\n", dri_fd);

	if(dri_fd == -1)
		return -1;

	pthread_t tid1;

	if(pthread_create(&tid1,NULL,trigger,NULL)){
		perror("[*] thread_create tid1\n");
		return -1;
	}
	while (1)
	{
		gem_close(arg.handle);
	}
	return 0;
}

This is a KASAN report:

==================================================================
BUG: KASAN: slab-use-after-free in qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69
Write of size 1 at addr ffff88801136c240 by task poc/515

CPU: 1 PID: 515 Comm: poc Not tainted 6.3.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014
Call Trace:
<TASK>
__dump_stack linux/lib/dump_stack.c:88
dump_stack_lvl+0x48/0x70 linux/lib/dump_stack.c:106
print_address_description linux/mm/kasan/report.c:319
print_report+0xd2/0x660 linux/mm/kasan/report.c:430
kasan_report+0xd2/0x110 linux/mm/kasan/report.c:536
__asan_report_store1_noabort+0x17/0x30 linux/mm/kasan/report_generic.c:383
qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69
drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96
drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102
drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788
drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891
vfs_ioctl linux/fs/ioctl.c:51
__do_sys_ioctl linux/fs/ioctl.c:870
__se_sys_ioctl linux/fs/ioctl.c:856
__x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856
do_syscall_x64 linux/arch/x86/entry/common.c:50
do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120
RIP: 0033:0x7ff5004ff5f7
Code: 00 00 00 48 8b 05 99 c8 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 69 c8 0d 00 f7 d8 64 89 01 48

RSP: 002b:00007ff500408ea8 EFLAGS: 00000286 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff5004ff5f7
RDX: 00007ff500408ec0 RSI: 00000000c02064b2 RDI: 0000000000000003
RBP: 00007ff500408ef0 R08: 0000000000000000 R09: 000000000000002a
R10: 0000000000000000 R11: 0000000000000286 R12: 00007fff1c6cdafe
R13: 00007fff1c6cdaff R14: 00007ff500408fc0 R15: 0000000000802000
</TASK>

Allocated by task 515:
kasan_save_stack+0x38/0x70 linux/mm/kasan/common.c:45
kasan_set_track+0x25/0x40 linux/mm/kasan/common.c:52
kasan_save_alloc_info+0x1e/0x40 linux/mm/kasan/generic.c:510
____kasan_kmalloc linux/mm/kasan/common.c:374
__kasan_kmalloc+0xc3/0xd0 linux/mm/kasan/common.c:383
kasan_kmalloc linux/./include/linux/kasan.h:196
kmalloc_trace+0x48/0xc0 linux/mm/slab_common.c:1066
kmalloc linux/./include/linux/slab.h:580
kzalloc linux/./include/linux/slab.h:720
qxl_bo_create+0x11a/0x610 linux/drivers/gpu/drm/qxl/qxl_object.c:124
qxl_gem_object_create+0xd9/0x360 linux/drivers/gpu/drm/qxl/qxl_gem.c:58
qxl_gem_object_create_with_handle+0xa1/0x180 linux/drivers/gpu/drm/qxl/qxl_gem.c:89
qxl_mode_dumb_create+0x1cd/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:63
drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96
drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102
drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788
drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891
vfs_ioctl linux/fs/ioctl.c:51
__do_sys_ioctl linux/fs/ioctl.c:870
__se_sys_ioctl linux/fs/ioctl.c:856
__x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856
do_syscall_x64 linux/arch/x86/entry/common.c:50
do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120

Freed by task 515:
kasan_save_stack+0x38/0x70 linux/mm/kasan/common.c:45
kasan_set_track+0x25/0x40 linux/mm/kasan/common.c:52
kasan_save_free_info+0x2e/0x60 linux/mm/kasan/generic.c:521
____kasan_slab_free linux/mm/kasan/common.c:236
____kasan_slab_free+0x180/0x1f0 linux/mm/kasan/common.c:200
__kasan_slab_free+0x12/0x30 linux/mm/kasan/common.c:244
kasan_slab_free linux/./include/linux/kasan.h:162
slab_free_hook linux/mm/slub.c:1781
slab_free_freelist_hook+0xd2/0x1a0 linux/mm/slub.c:1807
slab_free linux/mm/slub.c:3787
__kmem_cache_free+0x196/0x2d0 linux/mm/slub.c:3800
kfree+0x78/0x120 linux/mm/slab_common.c:1019
qxl_ttm_bo_destroy+0x140/0x1a0 linux/drivers/gpu/drm/qxl/qxl_object.c:49
ttm_bo_release+0x678/0xa30 linux/drivers/gpu/drm/ttm/ttm_bo.c:381
kref_put linux/./include/linux/kref.h:65
ttm_bo_put+0x50/0x80 linux/drivers/gpu/drm/ttm/ttm_bo.c:393
qxl_gem_object_free+0x3e/0x60 linux/drivers/gpu/drm/qxl/qxl_gem.c:42
drm_gem_object_free+0x5c/0x90 linux/drivers/gpu/drm/drm_gem.c:974
kref_put linux/./include/linux/kref.h:65
__drm_gem_object_put linux/./include/drm/drm_gem.h:431
drm_gem_object_put linux/./include/drm/drm_gem.h:444
qxl_gem_object_create_with_handle+0x151/0x180 linux/drivers/gpu/drm/qxl/qxl_gem.c:100
qxl_mode_dumb_create+0x1cd/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:63
drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96
drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102
drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788
drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891
vfs_ioctl linux/fs/ioctl.c:51
__do_sys_ioctl linux/fs/ioctl.c:870
__se_sys_ioctl linux/fs/ioctl.c:856
__x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856
do_syscall_x64 linux/arch/x86/entry/common.c:50
do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120

The buggy address belongs to the object at ffff88801136c000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 576 bytes inside of
freed 1024-byte region [ffff88801136c000, ffff88801136c400)

The buggy address belongs to the physical page:
page:0000000089fc329b refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11368
head:0000000089fc329b order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0010200 ffff888007841dc0 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff88801136c100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88801136c180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88801136c200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88801136c280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88801136c300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint

Instead of returning a weak reference to the qxl_bo object, return the
created drm_gem_object and let the caller decrement the reference count
when it no longer needs it. As a convenience, if the caller is not
interested in the gobj object, it can pass NULL to the parameter and the
reference counting is descremented internally.

The bug and the reproducer were originally found by the Zero Day Initiative project (ZDI-CAN-20940).

Link: https://www.zerodayinitiative.com/Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814165119.90847-1-wander@redhat.com

Merge tag 'amd-drm-fixes-6.5-2023-08-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.5-2023-08-16:

amdgpu:
- SMU 13.x fixes
- Fix mcbp parameter for gfx9
- SMU 11.x fixes
- Temporary fix for large numbers of XCP partitions
- S0ix fixes
- DCN 2.0 fix
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816200226.10771-1-alexander.deucher@amd.com

One EPROBE_DEFER handling fix for the JDI LT070ME05000, a timing fix for
the AUO G121EAN01 panel, an integer overflow and a memory leak fixes for
the qaic accel, a use-after-free fix for nouveau and a revert for an
alleged fix in EDID parsing.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3olqt33em5uhxzjbqghwcwnvmw73h7bxkbdxookmnkecymd4vc@7ogm6gewpprq

Merge tag 'drm-intel-fixes-2023-08-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix the flow for ignoring GuC SLPC efficient frequency selection (Vinay)
- Fix SDVO panel_type initialization (Jani)
- Fix display probe for IVB Q and IVB D GT2 server (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZN4yduyBU1Ev9dc7@intel.com

Saeed Mahameed says:

====================
mlx5 fixes 2023-08-16

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2023-08-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: Fix mlx5_cmd_update_root_ft() error flow
  net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT
====================

Link: https://lore.kernel.org/r/20230816204108.53819-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ADQ and switchdev are not supported simultaneously. Enabling both at the
same time can result in nullptr dereference.

To prevent this, check if ADQ is active when changing devlink mode to
switchdev mode, and check if switchdev is active when enabling ADQ.

Fixes: fbc7b27a ("ice: enable ndo_setup_tc support for mqprio_qdisc")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816193405.1307580-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

While performing certain power-off sequences, PCI drivers are
called to suspend and resume their underlying devices through
PCI PM (power management) interface. However this NIC hardware
does not support PCI PM suspend/resume operations so system wide
suspend/resume leads to bad MFW (management firmware) state which
causes various follow-up errors in driver when communicating with
the device/firmware afterwards.

To fix this driver implements PCI PM suspend handler to indicate
unsupported operation to the PCI subsystem explicitly, thus avoiding
system to go into suspended/standby mode.

Without this fix device/firmware does not recover unless system
is power cycled.

Fixes: 2950219d ("qede: Add basic network device support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816150711.59035-1-manishc@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

One missing check in virtio_net_hdr_to_skb() allowed
syzbot to crash kernels again [1]

Do not allow gso_size to be set to GSO_BY_FRAGS (0xffff),
because this magic value is used by the kernel.

[1]
general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 0 PID: 5039 Comm: syz-executor401 Not tainted 6.5.0-rc5-next-20230809-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:skb_segment+0x1a52/0x3ef0 net/core/skbuff.c:4500
Code: 00 00 00 e9 ab eb ff ff e8 6b 96 5d f9 48 8b 84 24 00 01 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e ea 21 00 00 48 8b 84 24 00 01
RSP: 0018:ffffc90003d3f1c8 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 000000000001fffe RCX: 0000000000000000
RDX: 000000000000000e RSI: ffffffff882a3115 RDI: 0000000000000070
RBP: ffffc90003d3f378 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 5ee4a93e456187d6 R12: 000000000001ffc6
R13: dffffc0000000000 R14: 0000000000000008 R15: 000000000000ffff
FS: 00005555563f2380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020020000 CR3: 000000001626d000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
udp6_ufo_fragment+0x9d2/0xd50 net/ipv6/udp_offload.c:109
ipv6_gso_segment+0x5c4/0x17b0 net/ipv6/ip6_offload.c:120
skb_mac_gso_segment+0x292/0x610 net/core/gso.c:53
__skb_gso_segment+0x339/0x710 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x3a5/0xf10 net/core/dev.c:3625
__dev_queue_xmit+0x8f0/0x3d60 net/core/dev.c:4329
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24c7/0x5570 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:727 [inline]
sock_sendmsg+0xd9/0x180 net/socket.c:750
____sys_sendmsg+0x6ac/0x940 net/socket.c:2496
___sys_sendmsg+0x135/0x1d0 net/socket.c:2550
__sys_sendmsg+0x117/0x1e0 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff27cdb34d9

Fixes: 3953c46c ("sk_buff: allow segmenting based on frag sizes")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230816142158.1779798-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The status of global socket memory pressure is updated when:

  a) __sk_mem_raise_allocated():

	enter: sk_memory_allocated(sk) >  sysctl_mem[1]
	leave: sk_memory_allocated(sk) <= sysctl_mem[0]

  b) __sk_mem_reduce_allocated():

	leave: sk_under_memory_pressure(sk) &&
		sk_memory_allocated(sk) < sysctl_mem[0]

So the conditions of leaving global pressure are inconstant, which
may lead to the situation that one pressured net-memcg prevents the
global pressure from being cleared when there is indeed no global
pressure, thus the global constrains are still in effect unexpectedly
on the other sockets.

This patch fixes this by ignoring the net-memcg's pressure when
deciding whether should leave global memory pressure.

Fixes: e1aab161 ("socket: initial cgroup code.")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20230816091226.1542-1-wuyun.abel@bytedance.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Existing comment in the source explains why we don't want efx_init_tc()
 failure to be fatal.  Cited commit erroneously consolidated failure
 paths causing the probe to be failed in this case.

Fixes: 7e056e23 ("sfc: obtain device mac address based on firmware handle for ef100")
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/aa7f589dd6028bd1ad49f0a85f37ab33c09b2b45.1692114888.git.ecree.xilinx@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>