- 18 Jun, 2021 16 commits
-
-
Geliang Tang authored
In mptcp_parse_option, adjust the expected_opsize, and always parse the data checksum value from the receiving DSS regardless of csum presence. Then save it in mp_opt->csum. Co-developed-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Geliang Tang authored
This patch added a new member named csum in struct mptcp_options_received. When parsing the MP_CAPABLE with data, if the checksum is enabled, adjust the expected_opsize. If the receiving option length matches the length with the data checksum, get the checksum value and save it in mp_opt->csum. And in mptcp_incoming_options, pass it to mpext->csum. We always parse any csum/nocsum combination and delay the presence check to later code, to allow reset if missing. Additionally, in the TX path, use the newly introduce ext field to avoid MPTCP csum recomputation on TCP retransmission and unneeded csum update on when setting the data fin_flag. Co-developed-by:
-
Geliang Tang authored
This patch added a new flag csum_reqd in struct mptcp_options_received, if the flag MPTCP_CAP_CHECKSUM_REQD is set in the receiving MP_CAPABLE suboption, set this flag. In mptcp_sk_clone and subflow_finish_connect, if the csum_reqd flag is set, enable the msk->csum_enabled flag. Acked-by:
-
Geliang Tang authored
This patch added a new parameter name sk in mptcp_get_options(). Acked-by:
-
Geliang Tang authored
In mptcp_write_options, if the checksum is enabled, adjust the option length and send out the data checksum with DSS suboption. Co-developed-by:
-
Geliang Tang authored
If the checksum is enabled, send out the data checksum with the MP_CAPABLE suboption with data. In mptcp_established_options_mp, save the data checksum in opts->ext_copy.csum. In mptcp_write_options, adjust the option length and send it out with the MP_CAPABLE suboption. Co-developed-by:
-
Geliang Tang authored
This patch added a new member csum_reqd in struct mptcp_out_options and struct mptcp_subflow_request_sock. Initialized it with the helper function mptcp_is_checksum_enabled(). In mptcp_write_options, if this field is enabled, send out the MP_CAPABLE suboption with the MPTCP_CAP_CHECKSUM_REQD flag. Acked-by:
-
Geliang Tang authored
This patch added a new member named csum in struct mptcp_ext, implemented a new function named mptcp_generate_data_checksum(). Generate the data checksum in mptcp_sendmsg_frag, save it in mpext->csum. Note that we must generate the csum for zero window probe, too. Do the csum update incrementally, to avoid multiple csum computation when the data is appended to existing skb. Note that in a later patch we will skip unneeded csum related operation. Changes not included here to keep the delta small. Co-developed-by:
-
Geliang Tang authored
This patch added a new member named csum_enabled in struct mptcp_sock, used a dummy mptcp_is_checksum_enabled() helper to initialize it. Also added a new member named mptcpi_csum_enabled in struct mptcp_info to expose the csum_enabled flag. Acked-by:
-
David S. Miller authored
Andrea Mayer says: ==================== seg6: add support for SRv6 End.DT46 Behavior SRv6 End.DT46 Behavior is defined in the IETF RFC 8986 [1] along with SRv6 End.DT4 and End.DT6 Behaviors. The proposed End.DT46 implementation is meant to support the decapsulation of both IPv4 and IPv6 traffic coming from a *single* SRv6 tunnel. The SRv6 End.DT46 Behavior greatly simplifies the setup and operations of SRv6 VPNs in the Linux kernel. - patch 1/2 is the core patch that adds support for the SRv6 End.DT46 Behavior; - patch 2/2 adds the selftest for SRv6 End.DT46 Behavior. The patch introducing the new SRv6 End.DT46 Behavior in iproute2 will follow shortly. Comments, suggestions and improvements are very welcome as always! ==================== Signed-off-by: -
Andrea Mayer authored
this selftest is designed for evaluating the new SRv6 End.DT46 Behavior used, in this example, for implementing IPv4/IPv6 L3 VPN use cases. Signed-off-by:
Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by:
Paolo Lungaroni <paolo.lungaroni@uniroma2.it> Acked-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Andrea Mayer authored
IETF RFC 8986 [1] includes the definition of SRv6 End.DT4, End.DT6, and End.DT46 Behaviors. The current SRv6 code in the Linux kernel only implements End.DT4 and End.DT6 which can be used respectively to support IPv4-in-IPv6 and IPv6-in-IPv6 VPNs. With End.DT4 and End.DT6 it is not possible to create a single SRv6 VPN tunnel to carry both IPv4 and IPv6 traffic. The proposed End.DT46 implementation is meant to support the decapsulation of IPv4 and IPv6 traffic coming from a single SRv6 tunnel. The implementation of the SRv6 End.DT46 Behavior in the Linux kernel greatly simplifies the setup and operations of SRv6 VPNs. The SRv6 End.DT46 Behavior leverages the infrastructure of SRv6 End.DT{4,6} Behaviors implemented so far, because it makes use of a VRF device in order to force the routing lookup into the associated routing table. To make the End.DT46 work properly, it must be guaranteed that the routing table used for routing lookup operations is bound to one and only one VRF during the tunnel creation. Such constraint has to be enforced by enabling the VRF strict_mode sysctl parameter, i.e.: $ sysctl -wq net.vrf.strict_mode=1 Note that the same approach is used for the SRv6 End.DT4 Behavior and for the End.DT6 Behavior in VRF mode. The command used to instantiate an SRv6 End.DT46 Behavior is straightforward, i.e.: $ ip -6 route add 2001:db8::1 encap seg6local action End.DT46 vrftable 100 dev vrf100. [1] https://www.rfc-editor.org/rfc/rfc8986.html#name-enddt46-decapsulation-and-s ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Performance and impact of SRv6 End.DT46 Behavior on the SRv6 Networking ======================================================================= This patch aims to add the SRv6 End.DT46 Behavior with minimal impact on the performance of SRv6 End.DT4 and End.DT6 Behaviors. In order to verify this, we tested the performance of the newly introduced SRv6 End.DT46 Behavior and compared it with the performance of SRv6 End.DT{4,6} Behaviors, considering both the patched kernel and the kernel before applying the End.DT46 patch (referred to as vanilla kernel). In details, the following decapsulation scenarios were considered: 1.a) IPv6 traffic in SRv6 End.DT46 Behavior on patched kernel; 1.b) IPv4 traffic in SRv6 End.DT46 Behavior on patched kernel; 2.a) SRv6 End.DT6 Behavior (VRF mode) on patched kernel; 2.b) SRv6 End.DT4 Behavior on patched kernel; 3.a) SRv6 End.DT6 Behavior (VRF mode) on vanilla kernel (without the End.DT46 patch); 3.b) SRv6 End.DT4 Behavior on vanilla kernel (without the End.DT46 patch). All tests were performed on a testbed deployed on the CloudLab [2] facilities. We considered IPv{4,6} traffic handled by a single core (at 2.4 GHz on a Xeon(R) CPU E5-2630 v3) on kernel 5.13-rc1 using packets of size ~ 100 bytes. Scenario (1.a): average 684.70 kpps; std. dev. 0.7 kpps; Scenario (1.b): average 711.69 kpps; std. dev. 1.2 kpps; Scenario (2.a): average 690.70 kpps; std. dev. 1.2 kpps; Scenario (2.b): average 722.22 kpps; std. dev. 1.7 kpps; Scenario (3.a): average 690.02 kpps; std. dev. 2.6 kpps; Scenario (3.b): average 721.91 kpps; std. dev. 1.2 kpps; Considering the results for the patched kernel (1.a, 1.b, 2.a, 2.b) we observe that the performance degradation incurred in using End.DT46 rather than End.DT6 and End.DT4 respectively for IPv6 and IPv4 traffic is minimal, around 0.9% and 1.5%. Such very minimal performance degradation is the price to be paid if one prefers to use a single tunnel capable of handling both types of traffic (IPv4 and IPv6). Comparing the results for End.DT4 and End.DT6 under the patched and the vanilla kernel (2.a, 2.b, 3.a, 3.b) we observe that the introduction of the End.DT46 patch has no impact on the performance of End.DT4 and End.DT6. [2] https://www.cloudlab.usSigned-off-by: -
Ioana Ciornei authored
Use the '.. code-block:: none' to properly highlight the documented DSDT entries. This also fixes warnings in the documentation build process. Fixes: e71305ac ("Documentation: ACPI: DSD: Document MDIO PHY") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Ioana Ciornei authored
Include the new phy.rst into the index of the ACPI support documentation. Fixes: e71305ac ("Documentation: ACPI: DSD: Document MDIO PHY") Reported-by:
-
Colin Ian King authored
The continue statement at the end of a for-loop has no effect, invert the if expression and remove the continue. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Oleksandr Mazur authored
devlink_trap tests for the netdevsim fail due to misspelled debugfs file name. Change this name, as well as name of callback function, to match the naming as in the devlink itself - 'trap_drop_counter'. Test-results: selftests: drivers/net/netdevsim: devlink_trap.sh TEST: Initialization [ OK ] TEST: Trap action [ OK ] TEST: Trap metadata [ OK ] TEST: Non-existing trap [ OK ] TEST: Non-existing trap action [ OK ] TEST: Trap statistics [ OK ] TEST: Trap group action [ OK ] TEST: Non-existing trap group [ OK ] TEST: Trap group statistics [ OK ] TEST: Trap policer [ OK ] TEST: Trap policer binding [ OK ] TEST: Port delete [ OK ] TEST: Device delete [ OK ] Fixes: a7b3527a ("drivers: net: netdevsim: add devlink trap_drop_counter_get implementation") Signed-off-by:
Oleksandr Mazur <oleksandr.mazur@plvision.eu> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Tested-by:
-
- 17 Jun, 2021 24 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-06-17 This series contains updates to ice driver only. Jake corrects a couple of entries in the PTYPE table to properly reflect the datasheet and removes unneeded NULL checks for some PTP calls. Paul reduces the scope of variables and removes the use of a local variable. Shaokun Zhang removes a duplicate function declaration. Lorenzo Bianconi fixes a compilation warning if PTP_1588_CLOCK is disabled. Colin Ian King changes a for loop to remove an unneeded 'continue'. ==================== Signed-off-by: -
David S. Miller authored
Guangbin Huang says: ==================== net: hdlc_ppp: clean up some code style issues This patchset clean up some code style issues. --- Change Log： V1 -> V2: 1. remove patch "net: hdlc_ppp: fix the comments style issue" and patch "net: hdlc_ppp: remove redundant spaces" from this patchset. ==================== Signed-off-by: -
Peng Li authored
Add space required after that ','. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Peng Li authored
This patch removes unnecessary out of memory message, to fix the following checkpatch.pl warning: "WARNING: Possible unnecessary 'out of memory' message" Signed-off-by:
-
Peng Li authored
Should not use assignment in if condition. Signed-off-by:
-
Peng Li authored
Fix the checkpatch error as "foo* bar" or "foo*bar" should be "foo *bar". Signed-off-by:
-
Peng Li authored
This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by:
-
Peng Li authored
This patch removes some redundant blank lines. Signed-off-by:
-
David S. Miller authored
Ioana Ciornei says: ==================== net: mdio: setup both fwnode and of_node The first patch in this series fixes a bug introduced by mistake in the previous ACPI MDIO patch set. The next two patches are adding a new helper which takes a device and a fwnode_handle and populates both the of_node and fwnode so that we make sure that a bug like this does not happen anymore. Also, the new helper is used in the MDIO area. ==================== Signed-off-by: -
Ioana Ciornei authored
Use the newly introduced helper to setup both the of_node and the fwnode for a given device. Signed-off-by:
-
Ioana Ciornei authored
There are many places where both the fwnode_handle and the of_node of a device need to be populated. Add a function which does both so that we have consistency. Suggested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Ioana Ciornei authored
By mistake, the of_node of the MDIO device was not setup in the patch linked below. As a consequence, any PHY driver that depends on the of_node in its probe callback was not be able to successfully finish its probe on a PHY, thus the Generic PHY driver was used instead. Fix this by actually setting up the of_node. Fixes: bc1bee3b ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()") Signed-off-by:
-
Hayes Wang authored
Store the information of the pipes to avoid calling usb_rcvctrlpipe(), usb_sndctrlpipe(), usb_rcvbulkpipe(), usb_sndbulkpipe(), and usb_rcvintpipe() frequently. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2021-06-17 The following pull-request contains BPF updates for your *net-next* tree. We've added 50 non-merge commits during the last 25 day(s) which contain a total of 148 files changed, 4779 insertions(+), 1248 deletions(-). The main changes are: 1) BPF infrastructure to migrate TCP child sockets from a listener to another in the same reuseport group/map, from Kuniyuki Iwashima. 2) Add a provably sound, faster and more precise algorithm for tnum_mul() as noted in https://arxiv.org/abs/2105.05398, from Harishankar Vishwanathan. 3) Streamline error reporting changes in libbpf as planned out in the 'libbpf: the road to v1.0' effort, from Andrii Nakryiko. 4) Add broadcast support to xdp_redirect_map(), from Hangbin Liu. 5) Extends bpf_map_lookup_and_delete_elem() functionality to 4 more map types, that is, {LRU_,PERCPU_,LRU_PERCPU_,}HASH, from Denis Salopek. 6) Support new LLVM relocations in libbpf to make them more linker friendly, also add a doc to describe the BPF backend relocations, from Yonghong Song. 7) Silence long standing KUBSAN complaints on register-based shifts in interpreter, from Daniel Borkmann and Eric Biggers. 8) Add dummy PT_REGS macros in libbpf to fail BPF program compilation when target arch cannot be determined, from Lorenz Bauer. 9) Extend AF_XDP to support large umems with 1M+ pages, from Magnus Karlsson. 10) Fix two minor libbpf tc BPF API issues, from Kumar Kartikeya Dwivedi. 11) Move libbpf BPF_SEQ_PRINTF/BPF_SNPRINTF macros that can be used by BPF programs to bpf_helpers.h header, from Florent Revest. ==================== Signed-off-by:
-
David S. Miller authored
Esben Haabendal says: ==================== net: gianfar: 64-bit statistics and rx_missed_errors counter This series replaces the legacy 32-bit statistics to proper 64-bit ditto, and implements rx_missed_errors counter on top of that. The device supports a 16-bit RDRP counter, and a related carry bit and interrupt, which allows implementation of a robust 64-bit counter. ==================== Signed-off-by: -
Esben Haabendal authored
Devices with RMON support has a 16-bit RDRP counter. It provides: "Receive dropped packets counter. Increments for frames received which are streamed to system but are later dropped due to lack of system resources." To handle more than 2^16 dropped packets, a carry bit in CAR1 register is set on overflow, so we enable irq when this is set, extending the counter to 2^64 for handling situations where lots of packets are missed (e.g. during heavy network storms). Signed-off-by:
Esben Haabendal <esben@geanix.com> Signed-off-by:
-
Esben Haabendal authored
These are for carry status and interrupt mask bits of statistics registers. Signed-off-by:
-
Esben Haabendal authored
The memset on CAMx is wrong, as it actually unmasks all carry irq's, which we clearly are not interested in. The memset on CARx registers is just pointless, as they are W1C. So let's just stop the memset before CAR1. Signed-off-by:
-
Esben Haabendal authored
The CAR1 and CAR2 registers are W1C style registers, to the memset does not actually clear them. Signed-off-by:
-
Esben Haabendal authored
No reason to wrap counter values at 2^32. Especially the bytes counters can wrap pretty fast on Gbit networks. Signed-off-by:
-
Esben Haabendal authored
No reason to produce the legacy net_device_stats struct, only to have it converted to rtnl_link_stats64. And as a bonus, this allows for improving counter size to 64 bit. Signed-off-by:
-
Yang Yingliang authored
When nla_put_u32() fails, 'ret' could be 0, it should return error code in tcf_del_walker(). Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Yang Yingliang authored
This node pointer is returned by of_parse_phandle() with refcount incremented in this function. of_node_put() on it before exiting this function. Reported-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Jian Shen authored
Th_strings arrays netdev_features_strings, tunable_strings, and phy_tunable_strings has been moved to file net/ethtool/common.c. So fixes the comment. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
