Add parsing support by implementing struct mlx5e_tc_act
for this action.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Add parsing support by implementing struct mlx5e_tc_act
for this action.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Add parsing support by implementing struct mlx5e_tc_act
for this action.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Add parsing support by implementing struct mlx5e_tc_act
for this action.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Add parsing support by implementing struct mlx5e_tc_act
for this action.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Add parsing support by implementing struct mlx5e_tc_act
for this action.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Add parsing support by implementing struct mlx5e_tc_act
for this action.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Add parsing support by implementing struct mlx5e_tc_act
for this action.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Add parsing support by implementing struct mlx5e_tc_act
for this action.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Add an infrastructure to help parsing tc actions in a generic way.

Supporting an action parser means implementing struct mlx5e_tc_act
for that action.

The infrastructure will give the possibility to be generic when parsing tc
actions, i.e. parse_tc_nic_actions() and parse_tc_fdb_actions().
To parse tc actions a user needs to allocate a parse_state instance
and pass it when iterating over the tc actions parsers.
If a parser doesn't exists then a user can treat it as unsupported.

To add an action parser a user needs to implement two callbacks.
The can_offload() callback to quickly check if an action can be offloaded.
The parse_action() callback to do actual parsing and prepare for offload.

Add implementation for drop, trap, mark and accept action parsers with this
commit to act as examples and implement usage of the new infrastructure for
those actions.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Kurt Kanzenbach says:

====================
net: dsa: hellcreek: Fix handling of MGMT protocols

this series fixes some minor issues with regards to management protocols
such as PTP and STP in the hellcreek DSA driver. Configure static FDB
for these protocols. The end result is:

|root@tsn:~# mv88e6xxx_dump --atu
|Using device <platform/ff240000.switch>
|ATU:
|FID  MAC               0123 Age OBT Pass Static Reprio Prio
|   0 01:1b:19:00:00:00 1100   1               X       X    6
|   1 01:00:5e:00:01:81 1100   1               X       X    6
|   2 33:33:00:00:01:81 1100   1               X       X    6
|   3 01:80:c2:00:00:0e 1100   1        X      X       X    6
|   4 01:00:5e:00:00:6b 1100   1        X      X       X    6
|   5 33:33:00:00:00:6b 1100   1        X      X       X    6
|   6 01:80:c2:00:00:00 1100   1        X      X       X    6

Previous version:
 * https://lore.kernel.org/r/20211213101810.121553-1-kurt@linutronix.de/

Changes since v1:
 * Target net-next, as this never worked correctly and is not critical
 * Add STP and PTP over UDP rules
 * Use pass_blocked for PDelay messages only (Richard Cochran)
====================

Link: https://lore.kernel.org/r/20211214134508.57806-1-kurt@linutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The switch supports PTP for UDP transport too. Therefore, add the missing static
FDB entries to ensure correct forwarding of these packets.

Fixes: ddd56dfe ("net: dsa: hellcreek: Add PTP clock support")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Allow PTP peer delay measurements on blocked ports by STP. In case of topology
changes the PTP stack can directly start with the correct delays.

Fixes: ddd56dfe ("net: dsa: hellcreek: Add PTP clock support")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Treat STP as management traffic. STP traffic is designated for the CPU port
only. In addition, STP traffic has to pass blocked ports.

Fixes: e4b27ebc ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The insertion of static FDB entries ignores the pass_blocked bit. That bit is
evaluated with regards to STP. Add the missing functionality.

Fixes: e4b27ebc ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use existing helpers (netdev_tracker_free()
and netdev_tracker_alloc()) to remove ifdefery.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20211214151515.312535-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Apparently a concurrent linkwatch_add_event() could
run while we are in __linkwatch_run_queue().

We need to free dev->linkwatch_dev_tracker tracker
under lweventlist_lock protection to avoid this race.

syzbot report:
[   77.935949][ T3661] reference already released.
[   77.941015][ T3661] allocated in:
[   77.944482][ T3661]  linkwatch_fire_event+0x202/0x260
[   77.950318][ T3661]  netif_carrier_on+0x9c/0x100
[   77.955120][ T3661]  __ieee80211_sta_join_ibss+0xc52/0x1590
[   77.960888][ T3661]  ieee80211_sta_create_ibss.cold+0xd2/0x11f
[   77.966908][ T3661]  ieee80211_ibss_work.cold+0x30e/0x60f
[   77.972483][ T3661]  ieee80211_iface_work+0xb70/0xd00
[   77.977715][ T3661]  process_one_work+0x9ac/0x1680
[   77.982671][ T3661]  worker_thread+0x652/0x11c0
[   77.987371][ T3661]  kthread+0x405/0x4f0
[   77.991465][ T3661]  ret_from_fork+0x1f/0x30
[   77.995895][ T3661] freed in:
[   77.999006][ T3661]  linkwatch_do_dev+0x96/0x160
[   78.004014][ T3661]  __linkwatch_run_queue+0x233/0x6a0
[   78.009496][ T3661]  linkwatch_event+0x4a/0x60
[   78.014099][ T3661]  process_one_work+0x9ac/0x1680
[   78.019034][ T3661]  worker_thread+0x652/0x11c0
[   78.023719][ T3661]  kthread+0x405/0x4f0
[   78.027810][ T3661]  ret_from_fork+0x1f/0x30
[   78.042541][ T3661] ------------[ cut here ]------------
[   78.048253][ T3661] WARNING: CPU: 0 PID: 3661 at lib/ref_tracker.c:120 ref_tracker_free.cold+0x110/0x14e
[   78.062364][ T3661] Modules linked in:
[   78.066424][ T3661] CPU: 0 PID: 3661 Comm: kworker/0:5 Not tainted 5.16.0-rc4-next-20211210-syzkaller #0
[   78.076075][ T3661] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[   78.090648][ T3661] Workqueue: events linkwatch_event
[   78.095890][ T3661] RIP: 0010:ref_tracker_free.cold+0x110/0x14e
[   78.102191][ T3661] Code: ea 03 48 c1 e0 2a 0f b6 04 02 84 c0 74 04 3c 03 7e 4c 8b 7b 18 e8 6b 54 e9 fa e8 26 4d 57 f8 4c 89 ee 48 89 ef e8 fb 33 36 00 <0f> 0b 41 bd ea ff ff ff e9 bd 60 e9 fa 4c 89 f7 e8 16 45 a2 f8 e9
[   78.127211][ T3661] RSP: 0018:ffffc90002b5fb18 EFLAGS: 00010246
[   78.133684][ T3661] RAX: 0000000000000000 RBX: ffff88807467f700 RCX: 0000000000000000
[   78.141928][ T3661] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 0000000000000001
[   78.150087][ T3661] RBP: ffff888057e105b8 R08: 0000000000000001 R09: ffffffff8ffa1967
[   78.158211][ T3661] R10: 0000000000000001 R11: 0000000000000000 R12: 1ffff9200056bf65
[   78.166204][ T3661] R13: 0000000000000292 R14: ffff88807467f718 R15: 00000000c0e0008c
[   78.174321][ T3661] FS:  0000000000000000(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
[   78.183310][ T3661] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   78.190156][ T3661] CR2: 000000c000208800 CR3: 000000007f7b5000 CR4: 00000000003506f0
[   78.198235][ T3661] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   78.206214][ T3661] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   78.214328][ T3661] Call Trace:
[   78.217679][ T3661]  <TASK>
[   78.220621][ T3661]  ? __sanitizer_cov_trace_const_cmp4+0x1c/0x70
[   78.226981][ T3661]  ? nlmsg_notify+0xbe/0x280
[   78.231607][ T3661]  ? ref_tracker_dir_exit+0x330/0x330
[   78.237654][ T3661]  ? linkwatch_do_dev+0x96/0x160
[   78.242628][ T3661]  ? __linkwatch_run_queue+0x233/0x6a0
[   78.248170][ T3661]  ? linkwatch_event+0x4a/0x60
[   78.252946][ T3661]  ? process_one_work+0x9ac/0x1680
[   78.258136][ T3661]  ? worker_thread+0x853/0x11c0
[   78.263020][ T3661]  ? kthread+0x405/0x4f0
[   78.267905][ T3661]  ? ret_from_fork+0x1f/0x30
[   78.272670][ T3661]  ? netdev_state_change+0xa1/0x130
[   78.278019][ T3661]  ? netdev_exit+0xd0/0xd0
[   78.282466][ T3661]  ? dev_activate+0x420/0xa60
[   78.287261][ T3661]  linkwatch_do_dev+0x96/0x160
[   78.292043][ T3661]  __linkwatch_run_queue+0x233/0x6a0
[   78.297505][ T3661]  ? linkwatch_do_dev+0x160/0x160
[   78.302561][ T3661]  linkwatch_event+0x4a/0x60
[   78.307225][ T3661]  process_one_work+0x9ac/0x1680
[   78.312292][ T3661]  ? pwq_dec_nr_in_flight+0x2a0/0x2a0
[   78.317757][ T3661]  ? rwlock_bug.part.0+0x90/0x90
[   78.322726][ T3661]  ? _raw_spin_lock_irq+0x41/0x50
[   78.327844][ T3661]  worker_thread+0x853/0x11c0
[   78.332543][ T3661]  ? process_one_work+0x1680/0x1680
[   78.338500][ T3661]  kthread+0x405/0x4f0
[   78.342610][ T3661]  ? set_kthread_struct+0x130/0x130

Fixes: 63f13937 ("net: linkwatch: add net device refcount tracker")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20211214051955.3569843-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

MPTCP can change sk_net_refcnt after sock_create_kern() call.

We need to change its corresponding get_net() to avoid
a splat at release time, as in :

refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 0 PID: 3599 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 1 PID: 3599 Comm: syz-fuzzer Not tainted 5.16.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d b1 99 a1 09 31 ff 89 de e8 5d 3a 9c fd 84 db 75 e0 e8 74 36 9c fd 48 c7 c7 60 00 05 8a c6 05 91 99 a1 09 01 e8 cc 4b 27 05 <0f> 0b eb c4 e8 58 36 9c fd 0f b6 1d 80 99 a1 09 31 ff 89 de e8 28
RSP: 0018:ffffc90001f5fab0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff888021873a00 RSI: ffffffff815f1e28 RDI: fffff520003ebf48
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815ebbce R11: 0000000000000000 R12: 1ffff920003ebf5b
R13: 00000000ffffffef R14: ffffffff8d2fcd94 R15: ffffc90001f5fd10
FS:  000000c00008a090(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0a5b59e300 CR3: 000000001cbe6000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __refcount_dec include/linux/refcount.h:344 [inline]
 refcount_dec include/linux/refcount.h:359 [inline]
 ref_tracker_free+0x4fe/0x610 lib/ref_tracker.c:101
 netns_tracker_free include/net/net_namespace.h:327 [inline]
 put_net_track include/net/net_namespace.h:341 [inline]
 __sk_destruct+0x4a6/0x920 net/core/sock.c:2042
 sk_destruct+0xbd/0xe0 net/core/sock.c:2058
 __sk_free+0xef/0x3d0 net/core/sock.c:2069
 sk_free+0x78/0xa0 net/core/sock.c:2080
 sock_put include/net/sock.h:1911 [inline]
 __mptcp_close_ssk+0x435/0x590 net/mptcp/protocol.c:2276
 __mptcp_destroy_sock+0x35f/0x830 net/mptcp/protocol.c:2702
 mptcp_close+0x5f8/0x7f0 net/mptcp/protocol.c:2750
 inet_release+0x12e/0x280 net/ipv4/af_inet.c:428
 inet6_release+0x4c/0x70 net/ipv6/af_inet6.c:476
 __sock_release+0xcd/0x280 net/socket.c:649
 sock_close+0x18/0x20 net/socket.c:1314
 __fput+0x286/0x9f0 fs/file_table.c:280
 task_work_run+0xdd/0x1a0 kernel/task_work.c:164
 tracehook_notify_resume include/linux/tracehook.h:189 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:175 [inline]
 exit_to_user_mode_prepare+0x27e/0x290 kernel/entry/common.c:207
 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
 syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300
 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: ffa84b5f ("net: add netns refcount tracker to struct sock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: Florian Westphal <fw@strlen.de>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20211214043208.3543046-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot reminded me that rt6_probe() can run from
atomic contexts.

stack backtrace:

CPU: 1 PID: 7461 Comm: syz-executor.2 Not tainted 5.16.0-rc4-next-20211210-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_usage_bug kernel/locking/lockdep.c:203 [inline]
 valid_state kernel/locking/lockdep.c:3945 [inline]
 mark_lock_irq kernel/locking/lockdep.c:4148 [inline]
 mark_lock.cold+0x61/0x8e kernel/locking/lockdep.c:4605
 mark_usage kernel/locking/lockdep.c:4500 [inline]
 __lock_acquire+0x11d5/0x54a0 kernel/locking/lockdep.c:4981
 lock_acquire kernel/locking/lockdep.c:5639 [inline]
 lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5604
 __fs_reclaim_acquire mm/page_alloc.c:4550 [inline]
 fs_reclaim_acquire+0x115/0x160 mm/page_alloc.c:4564
 might_alloc include/linux/sched/mm.h:253 [inline]
 slab_pre_alloc_hook mm/slab.h:739 [inline]
 slab_alloc_node mm/slub.c:3145 [inline]
 slab_alloc mm/slub.c:3239 [inline]
 kmem_cache_alloc_trace+0x3b/0x2c0 mm/slub.c:3256
 kmalloc include/linux/slab.h:581 [inline]
 kzalloc include/linux/slab.h:715 [inline]
 ref_tracker_alloc+0xe1/0x430 lib/ref_tracker.c:74
 netdev_tracker_alloc include/linux/netdevice.h:3860 [inline]
 dev_hold_track include/linux/netdevice.h:3877 [inline]
 rt6_probe net/ipv6/route.c:661 [inline]
 find_match.part.0+0xac9/0xd00 net/ipv6/route.c:752
 find_match net/ipv6/route.c:825 [inline]
 __find_rr_leaf+0x17f/0xd20 net/ipv6/route.c:826
 find_rr_leaf net/ipv6/route.c:847 [inline]
 rt6_select net/ipv6/route.c:891 [inline]
 fib6_table_lookup+0x649/0xa20 net/ipv6/route.c:2185
 ip6_pol_route+0x1c5/0x11e0 net/ipv6/route.c:2221
 pol_lookup_func include/net/ip6_fib.h:580 [inline]
 fib6_rule_lookup+0x52a/0x6f0 net/ipv6/fib6_rules.c:120
 ip6_route_output_flags_noref+0x2e2/0x380 net/ipv6/route.c:2629
 ip6_route_output_flags+0x72/0x320 net/ipv6/route.c:2642
 ip6_route_output include/net/ip6_route.h:98 [inline]
 ip6_dst_lookup_tail+0x5ab/0x1620 net/ipv6/ip6_output.c:1070
 ip6_dst_lookup_flow+0x8c/0x1d0 net/ipv6/ip6_output.c:1200
 geneve_get_v6_dst+0x46f/0x9a0 drivers/net/geneve.c:858
 geneve6_xmit_skb drivers/net/geneve.c:991 [inline]
 geneve_xmit+0x520/0x3530 drivers/net/geneve.c:1074
 __netdev_start_xmit include/linux/netdevice.h:4685 [inline]
 netdev_start_xmit include/linux/netdevice.h:4699 [inline]
 xmit_one net/core/dev.c:3473 [inline]
 dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3489
 __dev_queue_xmit+0x2983/0x3640 net/core/dev.c:4112
 neigh_resolve_output net/core/neighbour.c:1522 [inline]
 neigh_resolve_output+0x50e/0x820 net/core/neighbour.c:1502
 neigh_output include/net/neighbour.h:541 [inline]
 ip6_finish_output2+0x56e/0x14f0 net/ipv6/ip6_output.c:126
 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
 __ip6_finish_output+0x61e/0xe80 net/ipv6/ip6_output.c:170
 ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224
 dst_output include/net/dst.h:451 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 ndisc_send_skb+0xa99/0x17f0 net/ipv6/ndisc.c:508
 ndisc_send_rs+0x12e/0x6f0 net/ipv6/ndisc.c:702
 addrconf_rs_timer+0x3f2/0x820 net/ipv6/addrconf.c:3898
 call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421
 expire_timers kernel/time/timer.c:1466 [inline]
 __run_timers.part.0+0x675/0xa20 kernel/time/timer.c:1734
 __run_timers kernel/time/timer.c:1715 [inline]
 run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1747
 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558
 invoke_softirq kernel/softirq.c:432 [inline]
 __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637
 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649
 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097
 </IRQ>

Fixes: fb67510b ("ipv6: add net device refcount tracker to rt6_probe_deferred()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20211214025806.3456382-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

IBMVNIC_STATS_TIMEOUT and IBMVNIC_INIT_FAILED are not used in the driver.
Remove them.
Suggested-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update return codes to be more informative.
Signed-off-by: Jacob Root <otis@otisroot.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 13510fef.

Causes build warnings.
Signed-off-by: David S. Miller <davem@davemloft.net>

Use min() in order to make code cleaner. Issue found by coccinelle.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vladimir Oltean says:

====================
DSA tagger-owned storage fixups

It seems that the DSA tagger-owned storage changes were insufficiently
tested and do not work in all cases. Specifically, the NXP Bluebox 3
(arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts) got broken by
these changes, because
(a) I forgot that DSA_TAG_PROTO_SJA1110 exists and differs from
    DSA_TAG_PROTO_SJA1105
(b) the Bluebox 3 uses a DSA switch tree with 2 switches, and the
    tagger-owned storage patches don't cover that use case well, it
    seems

Therefore, I'm sorry to say that there needs to be an API fixup: tagging
protocol drivers will from now on connect to individual switches from a
tree, rather than to the tree as a whole. This is more robust against
various ordering constraints in the DSA probe and teardown paths, and is
also symmetrical with the connection API exposed to the switch drivers
themselves, which is also per switch.

With these changes, the Bluebox 3 also works fine.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

On the NXP Bluebox 3 board which uses a multi-switch setup with sja1105,
the mechanism through which the tagger connects to the switch tree is
broken, due to improper DSA code design. At the time when tag_ops->connect()
is called in dsa_port_parse_cpu(), DSA hasn't finished "touching" all
the ports, so it doesn't know how large the tree is and how many ports
it has. It has just seen the first CPU port by this time. As a result,
this function will call the tagger's ->connect method too early, and the
tagger will connect only to the first switch from the tree.

This could be perhaps addressed a bit more simply by just moving the
tag_ops->connect(dst) call a bit later (for example in dsa_tree_setup),
but there is already a design inconsistency at present: on the switch
side, the notification is on a per-switch basis, but on the tagger side,
it is on a per-tree basis. Furthermore, the persistent storage itself is
per switch (ds->tagger_data). And the tagger connect and disconnect
procedures (at least the ones that exist currently) could see a fair bit
of simplification if they didn't have to iterate through the switches of
a tree.

To fix the issue, this change transforms tag_ops->connect(dst) into
tag_ops->connect(ds) and moves it somewhere where we already iterate
over all switches of a tree. That is in dsa_switch_setup_tag_protocol(),
which is a good placement because we already have there the connection
call to the switch side of things.

As for the dsa_tree_bind_tag_proto() method (called from the code path
that changes the tag protocol), things are a bit more complicated
because we receive the tree as argument, yet when we unwind on errors,
it would be nice to not call tag_ops->disconnect(ds) where we didn't
previously call tag_ops->connect(ds). We didn't have this problem before
because the tag_ops connection operations passed the entire dst before,
and this is more fine grained now. To solve the error rewind case using
the new API, we have to create yet one more cross-chip notifier for
disconnection, and stay connected with the old tag protocol to all the
switches in the tree until we've succeeded to connect with the new one
as well. So if something fails half way, the whole tree is still
connected to the old tagger. But there may still be leaks if the tagger
fails to connect to the 2nd out of 3 switches in a tree: somebody needs
to tell the tagger to disconnect from the first switch. Nothing comes
for free, and this was previously handled privately by the tagging
protocol driver before, but now we need to emit a disconnect cross-chip
notifier for that, because DSA has to take care of the unwind path. We
assume that the tagging protocol has connected to a switch if it has set
ds->tagger_data to something, otherwise we avoid calling its
disconnection method in the error rewind path.

The rest of the changes are in the tagging protocol drivers, and have to
do with the replacement of dst with ds. The iteration is removed and the
error unwind path is simplified, as mentioned above.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver was incorrectly converted assuming that "sja1105" is the only
tagger supported by this driver. This results in SJA1110 switches
failing to probe:

sja1105 spi1.0: Unable to connect to tag protocol "sja1110": -EPROTONOSUPPORT
sja1105: probe of spi1.2 failed with error -93

Add DSA_TAG_PROTO_SJA1110 to the list of supported taggers by the
sja1105 driver. The sja1105_tagger_data structure format is common for
the two tagging protocols.

Fixes: c79e8486 ("net: dsa: tag_sja1105: convert to tagger-owned data")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The method was meant to zeroize ds->tagger_data but got the wrong
pointer. Fix this.

Fixes: c79e8486 ("net: dsa: tag_sja1105: convert to tagger-owned data")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add missing extacks for common configuration errors.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev can be a NULL here, not all requests set require_dev.

Fixes: e4b89540 ("netlink: add net device refcount tracker to struct ethnl_req_info")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change the order of arguments and make qdisc_is_running() appear first.
This is more readable for the general case.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hangbin Liu says:

====================
net: add new hwtstamp flag HWTSTAMP_FLAG_BONDED_PHC_INDEX

This patchset add a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX.
When user want to get bond active interface's PHC, they need to add this flag
and aware the PHC index may changed.

v3: Use bitwise test to check the flags validation
v2: rename the flag to HWTSTAMP_FLAG_BONDED_PHC_INDEX
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When there is a failover, the PHC index of bond active interface will be
changed. This may break the user space program if the author didn't aware.

By setting this flag, the user should aware that the PHC index get/set
by syscall is not stable. And the user space is able to deal with it.
Without this flag, the kernel will reject the request forwarding to
bonding.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 94dd016a ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 94dd016a ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP
ioctl to active device") the user could get bond active interface's
PHC index directly. But when there is a failover, the bond active
interface will change, thus the PHC index is also changed. This may
break the user's program if they did not update the PHC timely.

This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX.
When the user wants to get the bond active interface's PHC, they need to
add this flag and be aware the PHC index may be changed.

With the new flag. All flag checks in current drivers are removed. Only
the checking in net_hwtstamp_validate() is kept.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Improve the build testing of mtk_eth drivers by enabling them when
COMPILE_TEST is selected. Moreover COMPILE_TEST will be useful
for the driver development.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The root-lock is dropped before dev_hard_start_xmit() is invoked and after
setting the __QDISC___STATE_RUNNING bit. If the Qdisc owner is preempted
by another sender/task with a higher priority then this new sender won't
be able to submit packets to the NIC directly instead they will be
enqueued into the Qdisc. The NIC will remain idle until the Qdisc owner
is scheduled again and finishes the job.

By serializing every task on the ->busylock then the task will be
preempted by a sender only after the Qdisc has no owner.

Always serialize on the busylock on PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The code that uses variable queued has been removed,
and "mt76_is_usb(dev) ? q->ndesc - q->queued : q->queued"
didn't do anything, so all they should be removed as well.

Eliminate the following clang warnings:
drivers/net/wireless/mediatek/mt76/debugfs.c:77:9: warning: variable
‘queued’ set but not used.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 2d8be76c ("mt76: debugfs: improve queue node readability")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently "bond_should_notify_peers: slave ..." messages are printed whenever
"bond_should_notify_peers" function is called.

+++
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Received LACPDU on port 1
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Rx Machine: Port=1, Last State=6, Curr State=6
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): partner sync=1
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
...
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Received LACPDU on port 2
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Rx Machine: Port=2, Last State=6, Curr State=6
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): partner sync=1
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
+++

This is confusing and can also clutter up debug logs.
Print logs only when the peer notification happens.
Signed-off-by: Suresh Kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dma_addr was declared using DEFINE_DMA_UNMAP_ADDR() which requires to
use dma_unmap_addr() to access it.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 753a026c ("net: ocelot: add FDMA support")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When inserting a SFP that runs at 2.5G, then the Serdes was still
configured to run at 1G. Because the config->speed was 0, and then the
speed of the serdes was not configured at all, it was using the default
value which is 1G. This patch stop calling the serdes function set_speed
and allow the serdes to figure out the speed based on the interface
type.

Fixes: d28d6d2e ("net: lan966x: add port module support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The test is currently run on a single host with private addresses,
either over veth or by setting a nic in loopback mode with macvlan.

Support running between two real devices. Allow overriding addresses.

Also cut timeout to fail faster on error and explicitly log success.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>