- 09 Nov, 2018 3 commits
-
-
Juergen Gross authored
Currently the size of hypercall buffers allocated via /dev/xen/hypercall is limited to a default of 64 memory pages. For live migration of guests this might be too small as the page dirty bitmask needs to be sized according to the size of the guest. This means migrating a 8GB sized guest is already exhausting the default buffer size for the dirty bitmap. There is no sensible way to set a sane limit, so just remove it completely. The device node's usage is limited to root anyway, so there is no additional DOS scenario added by allowing unlimited buffers. While at it make the error path for the -ENOMEM case a little bit cleaner by setting n_pages to the number of successfully allocated pages instead of the target size. Fixes: c51b3c63 ("xen: add new hypercall buffer mapping device") Cc: <stable@vger.kernel.org> #4.18 Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Juergen Gross authored
Commit a8565319 ("xen: make xen_qlock_wait() nestable") introduced a regression for Xen guests running fully virtualized (HVM or PVH mode). The Xen hypervisor wouldn't return from the poll hypercall with interrupts disabled in case of an interrupt (for PV guests it does). So instead of disabling interrupts in xen_qlock_wait() use a nesting counter to avoid calling xen_clear_irq_pending() in case xen_qlock_wait() is nested. Fixes: a8565319 ("xen: make xen_qlock_wait() nestable") Cc: stable@vger.kernel.org Reported-by:
Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by:
-
Juergen Gross authored
Commit 9da3f2b7 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses") introduced a regression for booting Xen PV guests. Xen PV guests are using __put_user() and __get_user() for accessing the p2m map (physical to machine frame number map) as accesses might fail in case of not populated areas of the map. With above commit using __put_user() and __get_user() for accessing kernel pages is no longer valid. So replace the Xen hack by adding appropriate p2m access functions using the default fixup handler. Fixes: 9da3f2b7 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses") Signed-off-by:
Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by:
-
- 06 Nov, 2018 2 commits
-
-
Manjunath Patil authored
info->nr_rings isn't adjusted in case of ENOMEM error from negotiate_mq(). This leads to kernel panic in error path. Typical call stack involving panic - #8 page_fault at ffffffff8175936f [exception RIP: blkif_free_ring+33] RIP: ffffffffa0149491 RSP: ffff8804f7673c08 RFLAGS: 00010292 ... #9 blkif_free at ffffffffa0149aaa [xen_blkfront] #10 talk_to_blkback at ffffffffa014c8cd [xen_blkfront] #11 blkback_changed at ffffffffa014ea8b [xen_blkfront] #12 xenbus_otherend_changed at ffffffff81424670 #13 backend_changed at ffffffff81426dc3 #14 xenwatch_thread at ffffffff81422f29 #15 kthread at ffffffff810abe6a #16 ret_from_fork at ffffffff81754078 Cc: stable@vger.kernel.org Fixes: 7ed8ce1c ("xen-blkfront: move negotiate_mq to cover all cases of new VBDs") Signed-off-by:Manjunath Patil <manjunath.b.patil@oracle.com> Acked-by:
Roger Pau Monné <roger.pau@citrix.com> Signed-off-by:
-
Liam Merwick authored
If a call to xenmem_reservation_increase() in gnttab_dma_free_pages() fails it triggers a message "Failed to decrease reservation..." which should be "Failed to increase reservation..." Fixes: 9bdc7304 ('xen/grant-table: Allow allocating buffers suitable for DMA') Reported-by:
Ross Philipson <ross.philipson@oracle.com> Signed-off-by:
Liam Merwick <liam.merwick@oracle.com> Reviewed-by:
Mark Kanda <mark.kanda@oracle.com> Reviewed-by:
-
- 02 Nov, 2018 1 commit
-
-
Stefano Stabellini authored
xen_create_contiguous_region has now only an implementation if CONFIG_XEN_PV is defined. However, on ARM we never set CONFIG_XEN_PV but we do have an implementation of xen_create_contiguous_region which is required for swiotlb-xen to work correctly (although it just sets *dma_handle). Cc: <stable@vger.kernel.org> # 4.12 Fixes: 16624390 ("xen: create xen_create/destroy_contiguous_region() stubs for PVHVM only builds") Signed-off-by:
Stefano Stabellini <stefanos@xilinx.com> Reviewed-by:
-
- 26 Oct, 2018 2 commits
-
-
Juergen Gross authored
xenbus_va_dev_error() will try to write error messages to Xenstore under the error/<dev-name>/error node (with <dev-name> something like "device/vbd/51872"). This will fail normally and another message about this failure is added to dmesg. I believe this is a remnant from very ancient times, as it was added in the first pvops rush of commits in 2007. So remove the additional message when writing to Xenstore failed as a minimum step. Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracel.com> Signed-off-by:
-
Juergen Gross authored
A Xen PVH guest has no associated qemu device model, so trying to unplug any emulated devices is making no sense at all. Bail out early from xen_unplug_emulated_devices() when running as PVH guest. This will avoid issuing the boot message: [ 0.000000] Xen Platform PCI: unrecognised magic value Cc: <stable@vger.kernel.org> # 4.11 Signed-off-by:
-
- 24 Oct, 2018 12 commits
-
-
Stefano Stabellini authored
It would be good for me to keep an eye on the patches that touch Xen support in Linux to try to spot changes that break Xen on ARM early on. Signed-off-by:
Stefano Stabellini <sstabellini@kernel.org> Reviewed-by:
-
Bartlomiej Zolnierkiewicz authored
'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also since commit f467c564 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by:
-
Boris Ostrovsky authored
Xend-based toolstacks don't have static-max entry in xenstore. The equivalent node for those toolstacks is memory_static_max. Fixes: 5266b8e4 (xen: fix booting ballooned down hvm guest) Signed-off-by:
-
Roger Pau Monne authored
While booting on an AMD EPYC box the stack canary would detect stack overflows when using the current PVH early stack size (256). Switch to using the value defined by BOOT_STACK_SIZE, which prevents the stack overflow. Cc: <stable@vger.kernel.org> # 4.11 Signed-off-by:
-
Juergen Gross authored
xen_qlock_wait() isn't safe for nested calls due to interrupts. A call of xen_qlock_kick() might be ignored in case a deeper nesting level was active right before the call of xen_poll_irq(): CPU 1: CPU 2: spin_lock(lock1) spin_lock(lock1) -> xen_qlock_wait() -> xen_clear_irq_pending() Interrupt happens spin_unlock(lock1) -> xen_qlock_kick(CPU 2) spin_lock_irqsave(lock2) spin_lock_irqsave(lock2) -> xen_qlock_wait() -> xen_clear_irq_pending() clears kick for lock1 -> xen_poll_irq() spin_unlock_irq_restore(lock2) -> xen_qlock_kick(CPU 2) wakes up spin_unlock_irq_restore(lock2) IRET resumes in xen_qlock_wait() -> xen_poll_irq() never wakes up The solution is to disable interrupts in xen_qlock_wait() and not to poll for the irq in case xen_qlock_wait() is called in nmi context. Cc: stable@vger.kernel.org Cc: Waiman.Long@hp.com Cc: peterz@infradead.org Signed-off-by:Jan Beulich <jbeulich@suse.com> Signed-off-by:
-
Juergen Gross authored
In the following situation a vcpu waiting for a lock might not be woken up from xen_poll_irq(): CPU 1: CPU 2: CPU 3: takes a spinlock tries to get lock -> xen_qlock_wait() frees the lock -> xen_qlock_kick(cpu2) -> xen_clear_irq_pending() takes lock again tries to get lock -> *lock = _Q_SLOW_VAL -> *lock == _Q_SLOW_VAL ? -> xen_poll_irq() frees the lock -> xen_qlock_kick(cpu3) And cpu 2 will sleep forever. This can be avoided easily by modifying xen_qlock_wait() to call xen_poll_irq() only if the related irq was not pending and to call xen_clear_irq_pending() only if it was pending. Cc: stable@vger.kernel.org Cc: Waiman.Long@hp.com Cc: peterz@infradead.org Signed-off-by: -
Geert Uytterhoeven authored
Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Jason Andryuk authored
XEN_BACKEND doesn't actually depend on XEN_DOM0. DomUs can serve backends to other DomUs. One example is a service VM providing network backends. The original Kconfig defaulted Dom0 to y and it could be disabled. DomU could not select the option. With the new Kconfig, we default y for Dom0 and n for DomU. Either can then toggle the selection. Signed-off-by:
Jason Andryuk <jandryuk@gmail.com> Reviewed-by:
-
Linus Torvalds authored
The networking merge brought in the experimental support for the Qualcomm ath10k system NOC, which selects QCOM_QMI_HELPERS as a dependency. But the ATH10K_SNOC option (which selects QCOM_QMI_HELPERS) depends on ARCH_QCOM || COMPILE_TEST in order to get wider build testing than just the unusual QCOM architecture build, while the QCOM_QMI_HELPERS option doesn't have that COMPILE_TEST option and is limited to only ARCH_QCOM. As a result, a "make allmodconfig" complains WARNING: unmet direct dependencies detected for QCOM_QMI_HELPERS Depends on [n]: ARCH_QCOM && NET [=y] Selected by [m]: - ATH10K_SNOC [=m] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && ATH10K [=m] && (ARCH_QCOM || COMPILE_TEST [=y]) Fix the config-time warning by making QCOM_QMI_HELPERS available when COMPILE_TEST, since the result seems to build fine. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Govind Singh <govinds@codeaurora.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: David Miller <davem@davemloft.net> Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds authored
Pull networking updates from David Miller: 1) Add VF IPSEC offload support in ixgbe, from Shannon Nelson. 2) Add zero-copy AF_XDP support to i40e, from Björn Töpel. 3) All in-tree drivers are converted to {g,s}et_link_ksettings() so we can get rid of the {g,s}et_settings ethtool callbacks, from Michal Kubecek. 4) Add software timestamping to veth driver, from Michael Walle. 5) More work to make packet classifiers and actions lockless, from Vlad Buslov. 6) Support sticky FDB entries in bridge, from Nikolay Aleksandrov. 7) Add ipv6 version of IP_MULTICAST_ALL sockopt, from Andre Naujoks. 8) Support batching of XDP buffers in vhost_net, from Jason Wang. 9) Add flow dissector BPF hook, from Petar Penkov. 10) i40e vf --> generic iavf conversion, from Jesse Brandeburg. 11) Add NLA_REJECT netlink attribute policy type, to signal when users provide attributes in situations which don't make sense. From Johannes Berg. 12) Switch TCP and fair-queue scheduler over to earliest departure time model. From Eric Dumazet. 13) Improve guest receive performance by doing rx busy polling in tx path of vhost networking driver, from Tonghao Zhang. 14) Add per-cgroup local storage to bpf 15) Add reference tracking to BPF, from Joe Stringer. The verifier can now make sure that references taken to objects are properly released by the program. 16) Support in-place encryption in TLS, from Vakul Garg. 17) Add new taprio packet scheduler, from Vinicius Costa Gomes. 18) Lots of selftests additions, too numerous to mention one by one here but all of which are very much appreciated. 19) Support offloading of eBPF programs containing BPF to BPF calls in nfp driver, frm Quentin Monnet. 20) Move dpaa2_ptp driver out of staging, from Yangbo Lu. 21) Lots of u32 classifier cleanups and simplifications, from Al Viro. 22) Add new strict versions of netlink message parsers, and enable them for some situations. From David Ahern. 23) Evict neighbour entries on carrier down, also from David Ahern. 24) Support BPF sk_msg verdict programs with kTLS, from Daniel Borkmann and John Fastabend. 25) Add support for filtering route dumps, from David Ahern. 26) New igc Intel driver for 2.5G parts, from Sasha Neftin et al. 27) Allow vxlan enslavement to bridges in mlxsw driver, from Ido Schimmel. 28) Add queue and stack map types to eBPF, from Mauricio Vasquez B. 29) Add back byte-queue-limit support to r8169, with all the bug fixes in other areas of the driver it works now! From Florian Westphal and Heiner Kallweit. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2147 commits) tcp: add tcp_reset_xmit_timer() helper qed: Fix static checker warning Revert "be2net: remove desc field from be_eq_obj" Revert "net: simplify sock_poll_wait" net: socionext: Reset tx queue in ndo_stop net: socionext: Add dummy PHY register read in phy_write() net: socionext: Stop PHY before resetting netsec net: stmmac: Set OWN bit for jumbo frames arm64: dts: stratix10: Support Ethernet Jumbo frame tls: Add maintainers net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode octeontx2-af: Support for NIXLF's UCAST/PROMISC/ALLMULTI modes octeontx2-af: Support for setting MAC address octeontx2-af: Support for changing RSS algorithm octeontx2-af: NIX Rx flowkey configuration for RSS octeontx2-af: Install ucast and bcast pkt forwarding rules octeontx2-af: Add LMAC channel info to NIXLF_ALLOC response octeontx2-af: NPC MCAM and LDATA extract minimal configuration octeontx2-af: Enable packet length and csum validation octeontx2-af: Support for VTAG strip and capture ... -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc updates from David Miller: "Mostly VDSO cleanups and optimizations" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Several small VDSO vclock_gettime.c improvements. sparc: Validate VDSO for undefined symbols. sparc: Really use linker with LDFLAGS. sparc: Improve VDSO CFLAGS. sparc: Set DISABLE_BRANCH_PROFILING in VDSO CFLAGS. sparc: Don't bother masking out TICK_PRIV_BIT in VDSO code. sparc: Inline VDSO gettime code aggressively. sparc: Improve VDSO instruction patching. sparc: Fix parport build warnings.
-
Eric Dumazet authored
With EDT model, SRTT no longer is inflated by pacing delays. This means that RTO and some other xmit timers might be setup incorrectly. This is particularly visible with either : - Very small enforced pacing rates (SO_MAX_PACING_RATE) - Reduced rto (from the default 200 ms) This can lead to TCP flows aborts in the worst case, or spurious retransmits in other cases. For example, this session gets far more throughput than the requested 80kbit : $ netperf -H 127.0.0.2 -l 100 -- -q 10000 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.2 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 540000 262144 262144 104.00 2.66 With the fix : $ netperf -H 127.0.0.2 -l 100 -- -q 10000 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.2 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 540000 262144 262144 104.00 0.12 EDT allows for better control of rtx timers, since TCP has a better idea of the earliest departure time of each skb in the rtx queue. We only have to eventually add to the timer the difference of the EDT time with current time. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 23 Oct, 2018 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc updates from Helge Deller: "Lots of small fixes and enhancements, most noteably: - Many TLB and cache flush optimizations (Dave) - Fixed HPMC/crash handler on 64-bit kernel (Dave and myself) - Added alternative infrastructre. The kernel now live-patches itself for various situations, e.g. replace SMP code when running on one CPU only or drop cache flushes when system has no cache installed. - vmlinuz now contains a full copy of the compressed vmlinux file. This simplifies debugging the currently booted kernel. - Unused driver removal (Christoph) - Reduced warnings of Dino PCI bridge when running in qemu - Removed gcc version check (Masahiro)" * 'parisc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (23 commits) parisc: Retrieve and display the PDC PAT capabilities parisc: Optimze cache flush algorithms parisc: Remove pte_inserted define parisc: Add PDC PAT cell_info() and pd_get_pdc_revisions() functions parisc: Drop two instructions from pte lookup code parisc: Use zdep for shlw macro on PA1.1 and PA2.0 parisc: Add alternative coding infrastructure parisc: Include compressed vmlinux file in vmlinuz boot kernel extract-vmlinux: Check for uncompressed image as fallback parisc: Fix address in HPMC IVA parisc: Fix exported address of os_hpmc handler parisc: Fix map_pages() to not overwrite existing pte entries parisc: Purge TLB entries after updating page table entry and set page accessed flag in TLB handler parisc: Release spinlocks using ordered store parisc: Ratelimit dino stuck interrupt warnings parisc: dino: Utilize DINO_MASK_IRQ() macro parisc: Clean up crash header output parisc: Add SYSTEM_INFO and REGISTER TOC PAT functions parisc: Remove PTE load and fault check from L2_ptep macro parisc: Reorder TLB flush timing calculation ... -
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM updates from Russell King: "The main item in this pull request are the Spectre variant 1.1 fixes from Julien Thierry. A few other patches to improve various areas, and removal of some obsolete mcount bits and a redundant kbuild conditional" * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8802/1: Call syscall_trace_exit even when system call skipped ARM: 8797/1: spectre-v1.1: harden __copy_to_user ARM: 8796/1: spectre-v1,v1.1: provide helpers for address sanitization ARM: 8795/1: spectre-v1.1: use put_user() for __put_user() ARM: 8794/1: uaccess: Prevent speculative use of the current addr_limit ARM: 8793/1: signal: replace __put_user_error with __put_user ARM: 8792/1: oabi-compat: copy oabi events using __copy_to_user() ARM: 8791/1: vfp: use __copy_to_user() when saving VFP state ARM: 8790/1: signal: always use __copy_to_user to save iwmmxt context ARM: 8789/1: signal: copy registers using __copy_to_user() ARM: 8801/1: makefile: use ARMv3M mode for RiscPC ARM: 8800/1: use choice for kernel unwinders ARM: 8798/1: remove unnecessary KBUILD_SRC ifeq conditional ARM: 8788/1: ftrace: remove old mcount support ARM: 8786/1: Debug kernel copy by printing
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 vdso updates from Ingo Molnar: "Two main changes: - Cleanups, simplifications and CLOCK_TAI support (Thomas Gleixner) - Improve code generation (Andy Lutomirski)" * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Rearrange do_hres() to improve code generation x86/vdso: Document vgtod_ts better x86/vdso: Remove "memory" clobbers in the vDSO syscall fallbacks x66/vdso: Add CLOCK_TAI support x86/vdso: Move cycle_last handling into the caller x86/vdso: Simplify the invalid vclock case x86/vdso: Replace the clockid switch case x86/vdso: Collapse coarse functions x86/vdso: Collapse high resolution functions x86/vdso: Introduce and use vgtod_ts x86/vdso: Use unsigned int consistently for vsyscall_gtod_data:: Seq x86/vdso: Enforce 64bit clocksource x86/time: Implement clocksource_arch_init() clocksource: Provide clocksource_arch_init()
-
Rahul Verma authored
Static Checker Warnings: drivers/net/ethernet/qlogic/qed/qed_main.c:1510 qed_fill_link_capability() error: uninitialized symbol 'tcvr_state'. drivers/net/ethernet/qlogic/qed/qed_mcp.c:1951 qed_mcp_trans_speed_mask() error: uninitialized symbol 'transceiver_state'. drivers/net/ethernet/qlogic/qed/qed_mcp.c:1951 qed_mcp_trans_speed_mask() error: uninitialized symbol 'transceiver_type'. Symbols tcvr_state, transceiver_state and transceiver_type are initialized with respective default state. Fixes: c56a8be7 ("qed: Add supported link and advertise link to display in ethtool.") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Rahul Verma <Rahul.Verma@cavium.com> Signed-off-by:
-
Ivan Vecera authored
The mentioned commit needs to be reverted because we cannot pass string allocated on stack to request_irq(). This function stores uses this pointer for later use (e.g. /proc/interrupts) so we need to keep this string persistently. Fixes: d6d9704a ("be2net: remove desc field from be_eq_obj") Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Karsten Graul authored
This reverts commit dd979b4d. This broke tcp_poll for SMC fallback: An AF_SMC socket establishes an internal TCP socket for the initial handshake with the remote peer. Whenever the SMC connection can not be established this TCP socket is used as a fallback. All socket operations on the SMC socket are then forwarded to the TCP socket. In case of poll, the file->private_data pointer references the SMC socket because the TCP socket has no file assigned. This causes tcp_poll to wait on the wrong socket. Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
David S. Miller authored
Masahisa Kojima says: ==================== Bugfix for the netsec driver This patch series include bugfix for the netsec ethernet controller driver, fix the problem in interface down/up. changes in v2: - change the place to perform the PHY power down - use the MACROs defiend in include/uapi/linux/mii.h - update commit comment ==================== Signed-off-by: -
Masahisa Kojima authored
We observed that packets and bytes count are not reset when user performs interface down. Eventually, tx queue is exhausted and packets will not be sent out. To avoid this problem, resets tx queue in ndo_stop. Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver") Signed-off-by:
Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by:
Yoshitoyo Osaki <osaki.yoshitoyo@socionext.com> Signed-off-by:
-
Masahisa Kojima authored
There is a compatibility issue between RTL8211E implemented in Developerbox and netsec ethernet controller IP. Our MDIO controller stops MDC clock right after the write access, but RTL8211E expects MDC clock must be kept toggling for several clock cycle with MDIO high before entering the IDLE state. Without keeping clock after write access, write access is not correctly handled and register is not updated. To meet this requirement, netsec driver needs to issue dummy read(e.g. read PHYID1(offset 0x2) register) right after write access, to keep MDC clock. We think this compatibility issue is a problem specific to our MDIO controller and RTL8211E. Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver") Signed-off-by:
-
Masahisa Kojima authored
In ndo_stop, driver resets the netsec ethernet controller IP. When the netsec IP is reset, HW running mode turns to NRM mode and driver has to wait until this mode transition completes. But mode transition to NRM will not complete if the PHY is in normal operation state. Netsec IP requires PHY is in power down state when it is reset. This modification stops the PHY before resetting netsec. Together with this modification, phy_addr is stored in netsec_priv structure because ndev->phydev is not yet ready in ndo_init. Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 pti updates from Ingo Molnar: "The main changes: - Make the IBPB barrier more strict and add STIBP support (Jiri Kosina) - Micro-optimize and clean up the entry code (Andy Lutomirski) - ... plus misc other fixes" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation: Propagate information about RSB filling mitigation to sysfs x86/speculation: Enable cross-hyperthread spectre v2 STIBP mitigation x86/speculation: Apply IBPB more strictly to avoid cross-process data leak x86/speculation: Add RETPOLINE_AMD support to the inline asm CALL_NOSPEC variant x86/CPU: Fix unused variable warning when !CONFIG_IA32_EMULATION x86/pti/64: Remove the SYSCALL64 entry trampoline x86/entry/64: Use the TSS sp2 slot for SYSCALL/SYSRET scratch space x86/entry/64: Document idtentry -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 platform updates from Ingo Molnar: "Two minor OLPC changes: a build fix and a new quirk" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/olpc: Fix build error with CONFIG_MFD_CS5535=m x86/olpc: Indicate that legacy PC XO-1 platform should not register RTC
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 paravirt updates from Ingo Molnar: "Two main changes: - Remove no longer used parts of the paravirt infrastructure and put large quantities of paravirt ops under a new config option PARAVIRT_XXL=y, which is selected by XEN_PV only. (Joergen Gross) - Enable PV spinlocks on Hyperv (Yi Sun)" * 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hyperv: Enable PV qspinlock for Hyper-V x86/hyperv: Add GUEST_IDLE_MSR support x86/paravirt: Clean up native_patch() x86/paravirt: Prevent redefinition of SAVE_FLAGS macro x86/xen: Make xen_reservation_lock static x86/paravirt: Remove unneeded mmu related paravirt ops bits x86/paravirt: Move the Xen-only pv_mmu_ops under the PARAVIRT_XXL umbrella x86/paravirt: Move the pv_irq_ops under the PARAVIRT_XXL umbrella x86/paravirt: Move the Xen-only pv_cpu_ops under the PARAVIRT_XXL umbrella x86/paravirt: Move items in pv_info under PARAVIRT_XXL umbrella x86/paravirt: Introduce new config option PARAVIRT_XXL x86/paravirt: Remove unused paravirt bits x86/paravirt: Use a single ops structure x86/paravirt: Remove clobbers from struct paravirt_patch_site x86/paravirt: Remove clobbers parameter from paravirt patch functions x86/paravirt: Make paravirt_patch_call() and paravirt_patch_jmp() static x86/xen: Add SPDX identifier in arch/x86/xen files x86/xen: Link platform-pci-unplug.o only if CONFIG_XEN_PVHVM x86/xen: Move pv specific parts of arch/x86/xen/mmu.c to mmu_pv.c x86/xen: Move pv irq related functions under CONFIG_XEN_PV umbrella -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 mm updates from Ingo Molnar: "Lots of changes in this cycle: - Lots of CPA (change page attribute) optimizations and related cleanups (Thomas Gleixner, Peter Zijstra) - Make lazy TLB mode even lazier (Rik van Riel) - Fault handler cleanups and improvements (Dave Hansen) - kdump, vmcore: Enable kdumping encrypted memory with AMD SME enabled (Lianbo Jiang) - Clean up VM layout documentation (Baoquan He, Ingo Molnar) - ... plus misc other fixes and enhancements" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits) x86/stackprotector: Remove the call to boot_init_stack_canary() from cpu_startup_entry() x86/mm: Kill stray kernel fault handling comment x86/mm: Do not warn about PCI BIOS W+X mappings resource: Clean it up a bit resource: Fix find_next_iomem_res() iteration issue resource: Include resource end in walk_*() interfaces x86/kexec: Correct KEXEC_BACKUP_SRC_END off-by-one error x86/mm: Remove spurious fault pkey check x86/mm/vsyscall: Consider vsyscall page part of user address space x86/mm: Add vsyscall address helper x86/mm: Fix exception table comments x86/mm: Add clarifying comments for user addr space x86/mm: Break out user address space handling x86/mm: Break out kernel address space handling x86/mm: Clarify hardware vs. software "error_code" x86/mm/tlb: Make lazy TLB mode lazier x86/mm/tlb: Add freed_tables element to flush_tlb_info x86/mm/tlb: Add freed_tables argument to flush_tlb_mm_range smp,cpumask: introduce on_each_cpu_cond_mask smp: use __cpumask_set_cpu in on_each_cpu_cond ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 hyperv updates from Ingo Molnar: "Two small changes: a boot warning removal and a minor cleanup" * 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hyperv: Remove unused include x86/hyperv: Suppress "PCI: Fatal: No config space access function found"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 grub2 updates from Ingo Molnar: "This extends the x86 boot protocol to include an address for the RSDP table - utilized by Xen currently. Matching Grub2 patches are pending as well. (Juergen Gross)" * 'x86-grub2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/acpi, x86/boot: Take RSDP address for boot params if available x86/boot: Add ACPI RSDP address to setup_header x86/xen: Fix boot loader version reported for PVH guests
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 cpu updates from Ingo Molnar: "The main changes in this cycle were: - Add support for the "Dhyana" x86 CPUs by Hygon: these are licensed based on the AMD Zen architecture, and are built and sold in China, for domestic datacenter use. The code is pretty close to AMD support, mostly with a few quirks and enumeration differences. (Pu Wen) - Enable CPUID support on Cyrix 6x86/6x86L processors" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/cpupower: Add Hygon Dhyana support cpufreq: Add Hygon Dhyana support ACPI: Add Hygon Dhyana support x86/xen: Add Hygon Dhyana support to Xen x86/kvm: Add Hygon Dhyana support to KVM x86/mce: Add Hygon Dhyana support to the MCA infrastructure x86/bugs: Add Hygon Dhyana to the respective mitigation machinery x86/apic: Add Hygon Dhyana support x86/pci, x86/amd_nb: Add Hygon Dhyana support to PCI and northbridge x86/amd_nb: Check vendor in AMD-only functions x86/alternative: Init ideal_nops for Hygon Dhyana x86/events: Add Hygon Dhyana support to PMU infrastructure x86/smpboot: Do not use BSP INIT delay and MWAIT to idle on Dhyana x86/cpu/mtrr: Support TOP_MEM2 and get MTRR number x86/cpu: Get cache info and setup cache cpumap for Hygon Dhyana x86/cpu: Create Hygon Dhyana architecture support file x86/CPU: Change query logic so CPUID is enabled before testing x86/CPU: Use correct macros for Cyrix calls -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 build update from Ingo Molnar: "A small cleanup to x86 Kconfigs" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kconfig: Remove redundant 'default n' lines from all x86 Kconfig's
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 boot updates from Ingo Molnar: "Two cleanups and a bugfix for a rare boot option combination" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/KASLR: Remove return value from handle_mem_options() x86/corruption-check: Use pr_*() instead of printk() x86/corruption-check: Fix panic in memory_corruption_check() when boot option without value is provided
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 asm updates from Ingo Molnar: "The main changes in this cycle were the fsgsbase related preparatory patches from Chang S. Bae - but there's also an optimized memcpy_flushcache() and a cleanup for the __cmpxchg_double() assembly glue" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fsgsbase/64: Clean up various details x86/segments: Introduce the 'CPUNODE' naming to better document the segment limit CPU/node NR trick x86/vdso: Initialize the CPU/node NR segment descriptor earlier x86/vdso: Introduce helper functions for CPU and node number x86/segments/64: Rename the GDT PER_CPU entry to CPU_NUMBER x86/fsgsbase/64: Factor out FS/GS segment loading from __switch_to() x86/fsgsbase/64: Convert the ELF core dump code to the new FSGSBASE helpers x86/fsgsbase/64: Make ptrace use the new FS/GS base helpers x86/fsgsbase/64: Introduce FS/GS base helper functions x86/fsgsbase/64: Fix ptrace() to read the FS/GS base accurately x86/asm: Use CC_SET()/CC_OUT() in __cmpxchg_double() x86/asm: Optimize memcpy_flushcache()
-
