- 19 Nov, 2012 23 commits
-
-
Stefan Raspl authored
Trace all supported and enabled card features to s390dbf. Signed-off-by:
Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefan Raspl authored
So far, virtual NICs whether attached to a VSWITCH or a guest LAN were always displayed as guest LANs in the device driver attributes and messages, while in fact it is a virtual NIC. Signed-off-by:
-
Ursula Braun authored
Remove BUG_ON's in claw driver, since the checked error conditions are null pointer accesses. Signed-off-by:
-
Ursula Braun authored
Remove BUG_ON's in ctcm driver, since the checked error conditions are null pointer accesses. Signed-off-by:
-
Stefan Raspl authored
Eliminate a variable that is never modified. Signed-off-by:
-
Eric W. Biederman authored
Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) calls to ns_capable(net->user_ns,CAP_NET_ADMIN) calls. Allow setting of the tun iff flags. Allow creating of tun devices. Allow adding a new queue to a tun device. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by:
-
Eric W. Biederman authored
Allow privileged users in any user namespace to bind to privileged sockets in network namespaces they control. Signed-off-by:
-
Eric W. Biederman authored
- Only allow moving network devices to network namespaces you have CAP_NET_ADMIN privileges over. - Enable creating/deleting/modifying interfaces - Enable adding/deleting addresses - Enable adding/setting/deleting neighbour entries - Enable adding/removing routes - Enable adding/removing fib rules - Enable setting the forwarding state - Enable adding/removing ipv6 address labels - Enable setting bridge parameter Signed-off-by:
-
Eric W. Biederman authored
- Enable the per device ipv4 sysctls: net/ipv4/conf/<if>/forwarding net/ipv4/conf/<if>/mc_forwarding net/ipv4/conf/<if>/accept_redirects net/ipv4/conf/<if>/secure_redirects net/ipv4/conf/<if>/shared_media net/ipv4/conf/<if>/rp_filter net/ipv4/conf/<if>/send_redirects net/ipv4/conf/<if>/accept_source_route net/ipv4/conf/<if>/accept_local net/ipv4/conf/<if>/src_valid_mark net/ipv4/conf/<if>/proxy_arp net/ipv4/conf/<if>/medium_id net/ipv4/conf/<if>/bootp_relay net/ipv4/conf/<if>/log_martians net/ipv4/conf/<if>/tag net/ipv4/conf/<if>/arp_filter net/ipv4/conf/<if>/arp_announce net/ipv4/conf/<if>/arp_ignore net/ipv4/conf/<if>/arp_accept net/ipv4/conf/<if>/arp_notify net/ipv4/conf/<if>/proxy_arp_pvlan net/ipv4/conf/<if>/disable_xfrm net/ipv4/conf/<if>/disable_policy net/ipv4/conf/<if>/force_igmp_version net/ipv4/conf/<if>/promote_secondaries net/ipv4/conf/<if>/route_localnet - Enable the global ipv4 sysctl: net/ipv4/ip_forward - Enable the per device ipv6 sysctls: net/ipv6/conf/<if>/forwarding net/ipv6/conf/<if>/hop_limit net/ipv6/conf/<if>/mtu net/ipv6/conf/<if>/accept_ra net/ipv6/conf/<if>/accept_redirects net/ipv6/conf/<if>/autoconf net/ipv6/conf/<if>/dad_transmits net/ipv6/conf/<if>/router_solicitations net/ipv6/conf/<if>/router_solicitation_interval net/ipv6/conf/<if>/router_solicitation_delay net/ipv6/conf/<if>/force_mld_version net/ipv6/conf/<if>/use_tempaddr net/ipv6/conf/<if>/temp_valid_lft net/ipv6/conf/<if>/temp_prefered_lft net/ipv6/conf/<if>/regen_max_retry net/ipv6/conf/<if>/max_desync_factor net/ipv6/conf/<if>/max_addresses net/ipv6/conf/<if>/accept_ra_defrtr net/ipv6/conf/<if>/accept_ra_pinfo net/ipv6/conf/<if>/accept_ra_rtr_pref net/ipv6/conf/<if>/router_probe_interval net/ipv6/conf/<if>/accept_ra_rt_info_max_plen net/ipv6/conf/<if>/proxy_ndp net/ipv6/conf/<if>/accept_source_route net/ipv6/conf/<if>/optimistic_dad net/ipv6/conf/<if>/mc_forwarding net/ipv6/conf/<if>/disable_ipv6 net/ipv6/conf/<if>/accept_dad net/ipv6/conf/<if>/force_tllao - Enable the global ipv6 sysctls: net/ipv6/bindv6only net/ipv6/icmp/ratelimit Signed-off-by:
-
Eric W. Biederman authored
Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Allow the vlan ioctls: SET_VLAN_INGRESS_PRIORITY_CMD SET_VLAN_EGRESS_PRIORITY_CMD SET_VLAN_FLAG_CMD SET_VLAN_NAME_TYPE_CMD ADD_VLAN_CMD DEL_VLAN_CMD Signed-off-by:
-
Eric W. Biederman authored
Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Allow setting bridge paramters via sysfs. Allow all of the bridge ioctls: BRCTL_ADD_IF BRCTL_DEL_IF BRCTL_SET_BRDIGE_FORWARD_DELAY BRCTL_SET_BRIDGE_HELLO_TIME BRCTL_SET_BRIDGE_MAX_AGE BRCTL_SET_BRIDGE_AGING_TIME BRCTL_SET_BRIDGE_STP_STATE BRCTL_SET_BRIDGE_PRIORITY BRCTL_SET_PORT_PRIORITY BRCTL_SET_PATH_COST BRCTL_ADD_BRIDGE BRCTL_DEL_BRDIGE Signed-off-by:
-
Eric W. Biederman authored
Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Allow creation of af_key sockets. Allow creation of llc sockets. Allow creation of af_packet sockets. Allow sending xfrm netlink control messages. Allow binding to netlink multicast groups. Allow sending to netlink multicast groups. Allow adding and dropping netlink multicast groups. Allow sending to all netlink multicast groups and port ids. Allow reading the netfilter SO_IP_SET socket option. Allow sending netfilter netlink messages. Allow setting and getting ip_vs netfilter socket options. Signed-off-by:
-
Eric W. Biederman authored
Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Settings that merely control a single network device are allowed. Either the network device is a logical network device where restrictions make no difference or the network device is hardware NIC that has been explicity moved from the initial network namespace. In general policy and network stack state changes are allowed while resource control is left unchanged. Allow the SIOCSIFADDR ioctl to add ipv6 addresses. Allow the SIOCDIFADDR ioctl to delete ipv6 addresses. Allow the SIOCADDRT ioctl to add ipv6 routes. Allow the SIOCDELRT ioctl to delete ipv6 routes. Allow creation of ipv6 raw sockets. Allow setting the IPV6_JOIN_ANYCAST socket option. Allow setting the IPV6_FL_A_RENEW parameter of the IPV6_FLOWLABEL_MGR socket option. Allow setting the IPV6_TRANSPARENT socket option. Allow setting the IPV6_HOPOPTS socket option. Allow setting the IPV6_RTHDRDSTOPTS socket option. Allow setting the IPV6_DSTOPTS socket option. Allow setting the IPV6_IPSEC_POLICY socket option. Allow setting the IPV6_XFRM_POLICY socket option. Allow sending packets with the IPV6_2292HOPOPTS control message. Allow sending packets with the IPV6_2292DSTOPTS control message. Allow sending packets with the IPV6_RTHDRDSTOPTS control message. Allow setting the multicast routing socket options on non multicast routing sockets. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, and SIOCDELTUNNEL ioctls for setting up, changing and deleting tunnels over ipv6. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, SIOCDELTUNNEL ioctls for setting up, changing and deleting ipv6 over ipv4 tunnels. Allow the SIOCADDPRL, SIOCDELPRL, SIOCCHGPRL ioctls for adding, deleting, and changing the potential router list for ISATAP tunnels. Signed-off-by:
-
Eric W. Biederman authored
Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Settings that merely control a single network device are allowed. Either the network device is a logical network device where restrictions make no difference or the network device is hardware NIC that has been explicity moved from the initial network namespace. In general policy and network stack state changes are allowed while resource control is left unchanged. Allow creating raw sockets. Allow the SIOCSARP ioctl to control the arp cache. Allow the SIOCSIFFLAG ioctl to allow setting network device flags. Allow the SIOCSIFADDR ioctl to allow setting a netdevice ipv4 address. Allow the SIOCSIFBRDADDR ioctl to allow setting a netdevice ipv4 broadcast address. Allow the SIOCSIFDSTADDR ioctl to allow setting a netdevice ipv4 destination address. Allow the SIOCSIFNETMASK ioctl to allow setting a netdevice ipv4 netmask. Allow the SIOCADDRT and SIOCDELRT ioctls to allow adding and deleting ipv4 routes. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for adding, changing and deleting gre tunnels. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for adding, changing and deleting ipip tunnels. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for adding, changing and deleting ipsec virtual tunnel interfaces. Allow setting the MRT_INIT, MRT_DONE, MRT_ADD_VIF, MRT_DEL_VIF, MRT_ADD_MFC, MRT_DEL_MFC, MRT_ASSERT, MRT_PIM, MRT_TABLE socket options on multicast routing sockets. Allow setting and receiving IPOPT_CIPSO, IP_OPT_SEC, IP_OPT_SID and arbitrary ip options. Allow setting IP_SEC_POLICY/IP_XFRM_POLICY ipv4 socket option. Allow setting the IP_TRANSPARENT ipv4 socket option. Allow setting the TCP_REPAIR socket option. Allow setting the TCP_CONGESTION socket option. Signed-off-by:
-
Eric W. Biederman authored
Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Settings that merely control a single network device are allowed. Either the network device is a logical network device where restrictions make no difference or the network device is hardware NIC that has been explicity moved from the initial network namespace. In general policy and network stack state changes are allowed while resource control is left unchanged. Allow ethtool ioctls. Allow binding to network devices. Allow setting the socket mark. Allow setting the socket priority. Allow setting the network device alias via sysfs. Allow setting the mtu via sysfs. Allow changing the network device flags via sysfs. Allow setting the network device group via sysfs. Allow the following network device ioctls. SIOCGMIIPHY SIOCGMIIREG SIOCSIFNAME SIOCSIFFLAGS SIOCSIFMETRIC SIOCSIFMTU SIOCSIFHWADDR SIOCSIFSLAVE SIOCADDMULTI SIOCDELMULTI SIOCSIFHWBROADCAST SIOCSMIIREG SIOCBONDENSLAVE SIOCBONDRELEASE SIOCBONDSETHWADDR SIOCBONDCHANGEACTIVE SIOCBRADDIF SIOCBRDELIF SIOCSHWTSTAMP Signed-off-by:
-
Eric W. Biederman authored
If the user calling sendmsg has the appropriate privieleges in their user namespace allow them to set the uid, gid, and pid in the SCM_CREDENTIALS control message to any valid value. Signed-off-by:
-
Zhao Hongjiang authored
Get rid of duplicate code in net_ctl_permissions and fix the comment. Signed-off-by:
Zhao Hongjiang <zhaohongjiang@huawei.com> Signed-off-by:
-
Eric W. Biederman authored
- Allow anyone with CAP_NET_ADMIN rights in the user namespace of the the netowrk namespace to change sysctls. - Allow anyone the uid of the user namespace root the same permissions over the network namespace sysctls as the global root. - Allow anyone with gid of the user namespace root group the same permissions over the network namespace sysctl as the global root group. Signed-off-by:
-
Eric W. Biederman authored
- In rtnetlink_rcv_msg convert the capable(CAP_NET_ADMIN) check to ns_capable(net->user-ns, CAP_NET_ADMIN). Allowing unprivileged users to make netlink calls to modify their local network namespace. - In the rtnetlink doit methods add capable(CAP_NET_ADMIN) so that calls that are not safe for unprivileged users are still protected. Later patches will remove the extra capable calls from methods that are safe for unprivilged users. Acked-by:
-
Eric W. Biederman authored
In preparation for supporting the creation of network namespaces by unprivileged users, modify all of the per net sysctl exports and refuse to allow them to unprivileged users. This makes it safe for unprivileged users in general to access per net sysctls, and allows sysctls to be exported to unprivileged users on an individual basis as they are deemed safe. Signed-off-by:
-
Eric W. Biederman authored
- Current is implicitly avaiable so passing current->nsproxy isn't useful. - The ctl_table_header is needed to find how the sysctl table is connected to the rest of sysctl. - ctl_table_root is avaiable in the ctl_table_header so no need to it. With these changes it becomes possible to write a version of net_sysctl_permission that takes into account the network namespace of the sysctl table, an important feature in extending the user namespace. Acked-by:
-
Eric W. Biederman authored
The user namespace which creates a new network namespace owns that namespace and all resources created in it. This way we can target capability checks for privileged operations against network resources to the user_ns which created the network namespace in which the resource lives. Privilege to the user namespace which owns the network namespace, or any parent user namespace thereof, provides the same privilege to the network resource. This patch is reworked from a version originally by Serge E. Hallyn <serge.hallyn@canonical.com> Acked-by:
-
Eric W. Biederman authored
The copy of copy_net_ns used when the network stack is not built is broken as it does not return -EINVAL when attempting to create a new network namespace. We don't even have a previous network namespace. Since we need a copy of copy_net_ns in net/net_namespace.h that is available when the networking stack is not built at all move the correct version of copy_net_ns from net_namespace.c into net_namespace.h Leaving us with just 2 versions of copy_net_ns. One version for when we compile in network namespace suport and another stub for all other occasions. Acked-by:
-
- 18 Nov, 2012 9 commits
-
-
Vlad Yasevich authored
Some pieces of network use core pieces of IPv6 stack. Keep them available while letting new GSO offload pieces depend on CONFIG_INET. Signed-off-by:
Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Sony Chacko authored
qlcnic_hw.c:1337:17: warning: cast removes address space of expression qlcnic_hw.c:1337:17: warning: incorrect type in argument 2 (different address spaces) qlcnic_hw.c:1337:17: expected void volatile [noderef] <asn:2>*addr qlcnic_hw.c:1337:17: got void *<noident> qlcnic_hw.c:1337:17: warning: cast removes address space of expression qlcnic_hw.c:1337:17: warning: incorrect type in argument 1 (different address spaces) qlcnic_hw.c:1337:17: expected void const volatile [noderef] <asn:2>*addr qlcnic_hw.c:1337:17: got void *<noident> The above warnings are originating from the macros QLCNIC_RD_DUMP_REG and QLCNIC_WR_DUMP_REG. The warnings are fixed and macros are replaced with equivalent functions in the only file from where it is called. The following warnings are fixed by making the functions static. qlcnic_hw.c:543:5: warning: symbol 'qlcnic_set_fw_loopback' was not declared. Should it be static? qlcnic_init.c:1853:6: warning: symbol 'qlcnic_process_rcv_diag' was not declared. Should it be static? Signed-off-by:
Sony Chacko <sony.chacko@qlogic.com> Signed-off-by:
-
Sony Chacko authored
Fix the following warnings: qlcnic_main.c: In function 'qlcnic_update_cmd_producer': qlcnic_main.c:119:51: warning: unused parameter 'adapter' [-Wunused-parameter] qlcnic_main.c:119: warning: unused parameter adapter qlcnic_init.c: In function qlcnic_process_lro qlcnic_init.c:1586: warning: unused parameter sds_ring qlcnic_init.c: In function qlcnic_process_rcv_diag qlcnic_init.c:1854: warning: unused parameter sds_ring qlcnic_init.c: In function qlcnic_fetch_mac qlcnic_init.c:1938: warning: unused parameter adapter warning: 'pci_using_dac' may be used uninitialized in this function [-Wmaybe-uninitialized] qlcnic_main.c:1569:10: note: 'pci_using_dac' was declared here Signed-off-by:
-
Daniel Borkmann authored
This patch is a follow-up for patch "net: filter: add vlan tag access" to support the new VLAN_TAG/VLAN_TAG_PRESENT accessors in BPF JIT. Signed-off-by:
Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch> Cc: Matt Evans <matt@ozlabs.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Matt Evans <matt@ozlabs.org> Signed-off-by:
-
Daniel Borkmann authored
This patch is a follow-up for patch "filter: add XOR instruction for use with X/K" that implements BPF PowerPC JIT parts for the BPF XOR operation. Signed-off-by:
-
Ben Hutchings authored
In commit a24006ed ('ptp: Enable clock drivers along with associated net/PHY drivers') I wrongly made PTP_1588_CLOCK_PCH depend on PCH_GBE. The dependency is really the other way around. Therefore make PCH_GBE select PTP_1588_CLOCK_PCH and remove the 'default y' from the latter. Reported-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Acked-by:
-
Rami Rosen authored
This patch removes addrexceeded member from vxlan_dev struct as it is unused. Signed-off-by:
Rami Rosen <ramirose@gmail.com> Acked-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Akinobu Mita authored
Use bitmap_weight to count the total number of bits set in bitmap. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Cc: linux-sctp@vger.kernel.org Cc: netdev@vger.kernel.org Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Minor line offset auto-merges. Signed-off-by:
-
- 17 Nov, 2012 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fix from Marcelo Tosatti: "A correction for oops on module init with older Intel hosts." * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Fix invalid secondary exec controls in vmx_cpuid_update()
-
- 16 Nov, 2012 6 commits
-
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (12 patches) revert "mm: fix-up zone present pages" tmpfs: change final i_blocks BUG to WARNING tmpfs: fix shmem_getpage_gfp() VM_BUG_ON mm: highmem: don't treat PKMAP_ADDR(LAST_PKMAP) as a highmem address mm: revert "mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures" rapidio: fix kernel-doc warnings swapfile: fix name leak in swapoff memcg: fix hotplugged memory zone oops mips, arc: fix build failure memcg: oom: fix totalpages calculation for memory.swappiness==0 mm: fix build warning for uninitialized value mm: add anon_vma_lock to validate_mm()
-
Andrew Morton authored
Revert commit 7f1290f2 ("mm: fix-up zone present pages") That patch tried to fix a issue when calculating zone->present_pages, but it caused a regression on 32bit systems with HIGHMEM. With that change, reset_zone_present_pages() resets all zone->present_pages to zero, and fixup_zone_present_pages() is called to recalculate zone->present_pages when the boot allocator frees core memory pages into buddy allocator. Because highmem pages are not freed by bootmem allocator, all highmem zones' present_pages becomes zero. Various options for improving the situation are being discussed but for now, let's return to the 3.6 code. Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by:
David Rientjes <rientjes@google.com> Tested-by:
Chris Clayton <chris2553@googlemail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Under a particular load on one machine, I have hit shmem_evict_inode()'s BUG_ON(inode->i_blocks), enough times to narrow it down to a particular race between swapout and eviction. It comes from the "if (freed > 0)" asymmetry in shmem_recalc_inode(), and the lack of coherent locking between mapping's nrpages and shmem's swapped count. There's a window in shmem_writepage(), between lowering nrpages in shmem_delete_from_page_cache() and then raising swapped count, when the freed count appears to be +1 when it should be 0, and then the asymmetry stops it from being corrected with -1 before hitting the BUG. One answer is coherent locking: using tree_lock throughout, without info->lock; reasonable, but the raw_spin_lock in percpu_counter_add() on used_blocks makes that messier than expected. Another answer may be a further effort to eliminate the weird shmem_recalc_inode() altogether, but previous attempts at that failed. So far undecided, but for now change the BUG_ON to WARN_ON: in usual circumstances it remains a useful consistency check. Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hugh Dickins authored
Fuzzing with trinity hit the "impossible" VM_BUG_ON(error) (which Fedora has converted to WARNING) in shmem_getpage_gfp(): WARNING: at mm/shmem.c:1151 shmem_getpage_gfp+0xa5c/0xa70() Pid: 29795, comm: trinity-child4 Not tainted 3.7.0-rc2+ #49 Call Trace: warn_slowpath_common+0x7f/0xc0 warn_slowpath_null+0x1a/0x20 shmem_getpage_gfp+0xa5c/0xa70 shmem_fault+0x4f/0xa0 __do_fault+0x71/0x5c0 handle_pte_fault+0x97/0xae0 handle_mm_fault+0x289/0x350 __do_page_fault+0x18e/0x530 do_page_fault+0x2b/0x50 page_fault+0x28/0x30 tracesys+0xe1/0xe6 Thanks to Johannes for pointing to truncation: free_swap_and_cache() only does a trylock on the page, so the page lock we've held since before confirming swap is not enough to protect against truncation. What cleanup is needed in this case? Just delete_from_swap_cache(), which takes care of the memcg uncharge. Signed-off-by:Dave Jones <davej@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Will Deacon authored
kmap_to_page returns the corresponding struct page for a virtual address of an arbitrary mapping. This works by checking whether the address falls in the pkmap region and using the pkmap page tables instead of the linear mapping if appropriate. Unfortunately, the bounds checking means that PKMAP_ADDR(LAST_PKMAP) is incorrectly treated as a highmem address and we can end up walking off the end of pkmap_page_table and subsequently passing junk to pte_page. This patch fixes the bound check to stay within the pkmap tables. Signed-off-by:
Will Deacon <will.deacon@arm.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by:
-
Mel Gorman authored
Jiri Slaby reported the following: (It's an effective revert of "mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures".) Given kswapd had hours of runtime in ps/top output yesterday in the morning and after the revert it's now 2 minutes in sum for the last 24h, I would say, it's gone. The intention of the patch in question was to compensate for the loss of lumpy reclaim. Part of the reason lumpy reclaim worked is because it aggressively reclaimed pages and this patch was meant to be a sane compromise. When compaction fails, it gets deferred and both compaction and reclaim/compaction is deferred avoid excessive reclaim. However, since commit c6543459 ("mm: remove __GFP_NO_KSWAPD"), kswapd is woken up each time and continues reclaiming which was not taken into account when the patch was developed. Attempts to address the problem ended up just changing the shape of the problem instead of fixing it. The release window gets closer and while a THP allocation failing is not a major problem, kswapd chewing up a lot of CPU is. This patch reverts commit 83fde0f2 ("mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures") and will be revisited in the future. Signed-off-by:
Mel Gorman <mgorman@suse.de> Cc: Zdenek Kabelac <zkabelac@redhat.com> Tested-by:
Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de> Signed-off-by:
-
