- 30 Oct, 2008 40 commits
-
-
David Chinner authored
Prepare for removing the deleted inode list by marking inodes for reclaim in the inode radix trees so that we can use the radix trees to find reclaimable inodes. SGI-PV: 988142 SGI-Modid: xfs-linux-melb:xfs-kern:32331a Signed-off-by:
David Chinner <david@fromorbit.com> Signed-off-by:
Lachlan McIlroy <lachlan@sgi.com> Signed-off-by:
Christoph Hellwig <hch@infradead.org>
-
David Chinner authored
The function names xfs_finish_reclaim and xfs_finish_reclaim_all are not very descriptive of what they are reclaiming. Rename to xfs_reclaim_inode[s] to match the xfs_sync_inodes() function. SGI-PV: 988142 SGI-Modid: xfs-linux-melb:xfs-kern:32330a Signed-off-by:
-
David Chinner authored
Background inode reclaim is run by the xfssyncd. Move the reclaim worker functions to be close to the sync code as the are very similar in structure and are both run from the same background thread. SGI-PV: 988142 SGI-Modid: xfs-linux-melb:xfs-kern:32329a Signed-off-by:
-
Lachlan McIlroy authored
SGI-PV: 988141 SGI-Modid: xfs-linux-melb:xfs-kern:32325a Signed-off-by: -
David Chinner authored
With the combined linux and XFS inode, we need to ensure that the combined structure is not freed before the generic code is finished with the inode. As it turns out, there is a case where the XFS inode is freed before the linux inode - when xfs_reclaim() is called from ->clear_inode() on a clean inode, the xfs inode is freed during that call. The generic code references the inode after the ->clear_inode() call, so this is a use after free situation. Fix the problem by moving the xfs_reclaim() call to ->destroy_inode() instead of in ->clear_inode(). This ensures the combined inode structure is not freed until after the generic code has finished with it. SGI-PV: 988141 SGI-Modid: xfs-linux-melb:xfs-kern:32324a Signed-off-by:
-
David Chinner authored
To avoid issues with different lifecycles of XFS and Linux inodes, embedd the linux inode inside the XFS inode. This means that the linux inode has the same lifecycle as the XFS inode, even when it has been released by the OS. XFS inodes don't live much longer than this (a short stint in reclaim at most), so there isn't significant memory usage penalties here. Version 3 o kill xfs_icount() Version 2 o remove unused commented out code from xfs_iget(). o kill useless cast in VFS_I() SGI-PV: 988141 SGI-Modid: xfs-linux-melb:xfs-kern:32323a Signed-off-by:
-
David Chinner authored
To allow XFS to combine the XFS and linux inodes into a single structure, we need to drive inode lookup from the XFS inode cache, not the generic inode cache. This means that we need initialise a struct inode from a context outside alloc_inode() as it is no longer used by XFS. After inode allocation and initialisation, we need to add the inode to the superblock list, the in-use list, hash it and do some accounting. This all needs to be done with the inode_lock held and there are already several places in fs/inode.c that do this list manipulation. Factor out the common code, add a locking wrapper and export the function so ti can be called from XFS. Signed-off-by:
-
David Chinner authored
To allow XFS to combine the XFS and linux inodes into a single structure, we need to drive inode lookup from the XFS inode cache, not the generic inode cache. This means that we need initialise a struct inode from a context outside alloc_inode() as it is no longer used by XFS. Factor and export the struct inode initialisation code from alloc_inode() to inode_init_always() as a counterpart to inode_init_once(). i.e. we have to call this init function for each inode instantiation (always), as opposed inode_init_once() which is only called on slab object instantiation (once). Signed-off-by:
-
David Chinner authored
Once the Linux inode and the XFS inode are combined, we cannot rely on just check if the linux inode exists as a method of determining if it is valid or not. Hence we should always call xfs_mark_inode_dirty_sync() instead as it does the correct checks to determine if the liinux inode is in a valid state or not. SGI-PV: 988141 SGI-Modid: xfs-linux-melb:xfs-kern:32318a Signed-off-by:
-
David Chinner authored
There are really two cases in xfs_iget_core(). The first is the cache hit case, the second is the miss case. They share very little code, and hence can easily be factored out into separate functions. This makes the code much easier to understand and subsequently modify. SGI-PV: 988141 SGI-Modid: xfs-linux-melb:xfs-kern:32317a Signed-off-by:
-
Christoph Hellwig authored
We can only read inode->i_count if the inode is actually there and not a NULL pointer. This was introduced in one of the recent sync patches. SGI-PV: 988255 SGI-Modid: xfs-linux-melb:xfs-kern:32315a Signed-off-by:
-
David Chinner authored
With all the other filesystem sync code it in xfs_sync.c including the data quiesce code, it makes sense to move the remaining quiesce code to the same place. SGI-PV: 988140 SGI-Modid: xfs-linux-melb:xfs-kern:32312a Signed-off-by:
-
David Chinner authored
There are no more callers to xfs_sync() now, so remove the function altogther. SGI-PV: 988140 SGI-Modid: xfs-linux-melb:xfs-kern:32311a Signed-off-by:
-
David Chinner authored
SYNC_CLOSE is only ever used and checked in conjunction with SYNC_WAIT, and this only done in one spot. The only thing this does is make XFS_bflush() calls to the data buftargs. This will happen very shortly afterwards the xfs_sync() call anyway in the unmount path via the xfs_close_devices(), so this code is redundant and can be removed. That only user of SYNC_CLOSE is now gone, so kill the flag completely. SGI-PV: 988140 SGI-Modid: xfs-linux-melb:xfs-kern:32310a Signed-off-by:
-
David Chinner authored
Continue to de-multiplex xfs_sync be replacing all SYNC_DELWRI callers with direct calls functions that do the work. Isolate the data quiesce case to a function in xfs_sync.c. Isolate the FSDATA case with explicit calls to xfs_sync_fsdata(). Version 2: o Push delwri related log forces into xfs_sync_inodes(). SGI-PV: 988140 SGI-Modid: xfs-linux-melb:xfs-kern:32309a Signed-off-by:
-
David Chinner authored
Continue to de-multiplex xfs_sync be replacing all SYNC_ATTR callers with direct calls xfs_sync_inodes(). Add an assert into xfs_sync() to ensure we caught all the SYNC_ATTR callers. SGI-PV: 988140 SGI-Modid: xfs-linux-melb:xfs-kern:32308a Signed-off-by:
-
David Chinner authored
Start de-multiplexing xfs_sync() by making xfs_sync_worker() call the specific sync functions it needs. This is only a small, unique subset of the entire xfs_sync() code so is easier to follow. SGI-PV: 988140 SGI-Modid: xfs-linux-melb:xfs-kern:32307a Signed-off-by:
-
David Chinner authored
Now that the only caller is xfs_sync(), merge the two together as it makes no sense to keep them separate. SGI-PV: 988140 SGI-Modid: xfs-linux-melb:xfs-kern:32306a Signed-off-by:
-
David Chinner authored
Kill the unused arg in xfs_syncsub() and xfs_sync_inodes(). For callers of xfs_syncsub() that only want to flush inodes, replace xfs_syncsub() with direct calls to xfs_sync_inodes() as that is all that is being done with the specific flags being passed in. SGI-PV: 988140 SGI-Modid: xfs-linux-melb:xfs-kern:32305a Signed-off-by:
-
David Chinner authored
With the sync code relocated to the linux-2.6 directory we can use struct inodes directly. If we do the same thing for the quota release code, we can remove vn_grab altogether. While here, convert the VN_BAD() checks to is_bad_inode() so we can remove vnodes entirely from this code. SGI-PV: 988140 SGI-Modid: xfs-linux-melb:xfs-kern:32304a Signed-off-by:
-
Christoph Hellwig authored
Split out two helpers from xfs_syncsub for the dummy log commit and the superblock writeout. SGI-PV: 988140 SGI-Modid: xfs-linux-melb:xfs-kern:32303a Signed-off-by:
-
Christoph Hellwig authored
Move the XFS_BMAP_SANITY_CHECK macro out of line and make it a properly typed function. Also pass the xfs_buf for the btree block instead of just the btree block header, as we will need some additional information for it to implement CRC checking of btree blocks. SGI-PV: 988146 SGI-Modid: xfs-linux-melb:xfs-kern:32301a Signed-off-by:
Donald Douwsma <donaldd@sgi.com> Signed-off-by:
-
Christoph Hellwig authored
structures. Always use the generic xfs_btree_block type instead of the short / long structures. Add XFS_BTREE_SBLOCK_LEN / XFS_BTREE_LBLOCK_LEN defines for the length of a short / long form block. The rationale for this is that we will grow more btree block header variants to support CRCs and other RAS information, and always accessing them through the same datatype with unions for the short / long form pointers makes implementing this much easier. SGI-PV: 988146 SGI-Modid: xfs-linux-melb:xfs-kern:32300a Signed-off-by:
-
Christoph Hellwig authored
Replace the generic record / key / ptr addressing macros that use cpp token pasting with simpler macros that do the job for just one given btree type. The new macros lose the cur argument and thus can be used outside the core btree code, but also gain an xfs_mount * argument to allow for checking the CRC flag in the near future. Note that many of these macros aren't actually used in the kernel code, but only in userspace (mostly in xfs_repair). SGI-PV: 988146 SGI-Modid: xfs-linux-melb:xfs-kern:32295a Signed-off-by:
-
David Chinner authored
Now we've removed all users of the mount inode list, we can kill it. This reduces the size of the xfs_inode by 2 pointers. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32293a Signed-off-by:
-
Christoph Hellwig authored
Clean up the way the maximum and minimum records for the btree blocks are calculated. For the alloc and inobt btrees all the values are pre-calculated in xfs_mount_common, and we switch the current loop around the ugly generic macros that use cpp token pasting to generate type names to two small helpers in normal C code. For the bmbt and bmdr trees these helpers also exist, but can be called during runtime, too. Here we also kill various macros dealing with them and inline the logic into the get_minrecs / get_maxrecs / get_dmaxrecs methods in xfs_bmap_btree.c. Note that all these new helpers take an xfs_mount * argument which will be needed to determine the size of a btree block once we add support for extended btree blocks with CRCs and other RAS information. SGI-PV: 988146 SGI-Modid: xfs-linux-melb:xfs-kern:32292a Signed-off-by:
-
David Chinner authored
Make releasing all inode dquots traverse the per-ag inode radix trees rather than the mount inode list. This removes another user of the mount inode list. Version 3 o fix comment relating to avoiding trying to release the quota inodes and those in reclaim. Version 2 o add comment explaining use of gang lookups for a single inode o use IRELE, not VN_RELE o move check for ag initialisation to caller. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32291a Signed-off-by:
-
David Chinner authored
Update xfs_sync_inodes to walk the inode radix tree cache to find dirty inodes. This removes a huge bunch of nasty, messy code for traversing the mount inode list safely and removes another user of the mount inode list. Version 3 o rediff against new linux-2.6/xfs_sync.c code Version 2 o add comment explaining use of gang lookups for a single inode o use IRELE, not VN_RELE o move check for ag initialisation to caller. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32290a Signed-off-by:
-
David Chinner authored
Normally dquots are written back via delayed write mechanisms. They are flushed to their backing buffer by xfssyncd, which is then pushed out by either AIL or xfsbufd flushing. The flush from the xfssyncd is supposed to be non-blocking, but xfs_qm_dqflush() always waits for pinned duots, which means that it will block for the length of time it takes to do a synchronous log force. This causes unnecessary extra log I/O to be issued whenever we try to flush a busy dquot. Avoid the log forces and blocking xfssyncd by making xfs_qm_dqflush() pay attention to what type of sync it is doing when it sees a pinned dquot and not waiting when doing non-blocking flushes. SGI-PV: 988147 SGI-Modid: xfs-linux-melb:xfs-kern:32287a Signed-off-by:
Peter Leckie <pleckie@sgi.com> Signed-off-by:
-
David Chinner authored
xfs_iflush_all() walks the m_inodes list to find inodes that need reclaiming. We already have such a list - the m_del_inodes list. Replace xfs_iflush_all() with a call to xfs_finish_reclaim_all() and clean up xfs_finish_reclaim_all() to handle the different flush modes now needed. Originally based on a patch from Christoph Hellwig. Version 3 o rediff against new linux-2.6/xfs_sync.c code Version 2 o revert xfs_syncsub() inode reclaim behaviour back to original code o xfs_quiesce_fs() should use XFS_IFLUSH_DELWRI_ELSE_ASYNC, not XFS_IFLUSH_ASYNC, to prevent change of behaviour. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32284a Signed-off-by:
-
David Chinner authored
Move all the xfssyncd code to the new xfs_sync.c file. This places it closer to the actual code that it interacts with, rather than just being associated with high level VFS code. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32283a Signed-off-by:
-
David Chinner authored
The sync code in XFS is spread around several files. While it used to make sense to have such a distribution, the code is about to be cleaned up and so centralising it in one spot as the first step makes sense. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32282a Signed-off-by:
-
Barry Naujok authored
SGI-PV: 987246 SGI-Modid: xfs-linux-melb:xfs-kern:32233a Signed-off-by:
Barry Naujok <bnaujok@sgi.com> Signed-off-by:
Eric Sandeen <sandeen@sandeen.net> Signed-off-by:
-
Barry Naujok authored
SGI-PV: 987683 SGI-Modid: xfs-linux-melb:xfs-kern:32232a Signed-off-by:
-
Barry Naujok authored
SGI-PV: 986558 SGI-Modid: xfs-linux-melb:xfs-kern:32231a Signed-off-by:
-
Lachlan McIlroy authored
SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32224a Signed-off-by:
-
Peter Leckie authored
This is a fix for patch " Clean up dquot pincount code" which introduced a build breakage due to a missing & in xfs_qm_dquot_logitem_pin. SGI-PV: 986789 SGI-Modid: xfs-linux-melb:xfs-kern:32221a Signed-off-by:
-
Peter Leckie authored
This is a code cleanup and optimization that removes a per mount point spinlock from the quota code and cleans up the code. The patch changes the pincount from being an int protected by a spinlock to an atomic_t allowing the pincount to be manipulated without holding the spinlock. This cleanup also protects against random wakup's of both the aild and xfssyncd by reevaluating the pincount after been woken. Two latter patches will address the Spurious wakeups. SGI-PV: 986789 SGI-Modid: xfs-linux-melb:xfs-kern:32215a Signed-off-by:
-
Lachlan McIlroy authored
It's possible to have outstanding xfs_ioend_t's queued when the file size is zero. This can happen in the direct I/O path when a direct I/O write fails due to ENOSPC. In this case the xfs_ioend_t will still be queued (ie xfs_end_io_direct() does not know that the I/O failed so can't force the xfs_ioend_t to be flushed synchronously). When we truncate a file on unlink we don't know to wait for these xfs_ioend_ts and we can have a use-after-free situation if the inode is reclaimed before the xfs_ioend_t is finally processed. As was suggested by Dave Chinner lets wait for all I/Os to complete when truncating the file size to zero. SGI-PV: 981668 SGI-Modid: xfs-linux-melb:xfs-kern:32216a Signed-off-by:
-
Christoph Hellwig authored
Make the existing bmap btree tracing generic so that it applies to all btree types. Some fragments lifted from a patch by Dave Chinner. This adds two files that were missed from the previous btree tracing checkin. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32210a Signed-off-by:
Bill O'Donnell <billodo@sgi.com> Signed-off-by:
-
