- 03 Oct, 2020 18 commits
-
-
Julian Wiedmann authored
smatch complains about net/iucv/af_iucv.c:624 iucv_sock_bind() error: memcpy() 'sa->siucv_user_id' too small (8 vs 9) Which is absolutely correct - the memcpy() takes 9 bytes (sizeof(uid)) from an 8-byte field (sa->siucv_user_id). Luckily the sockaddr_iucv struct contains more data after the .siucv_user_id field, and we checked the size of the passed data earlier on. So the memcpy() won't accidentally read from an invalid location. Fix the warning by reducing the size of the uid variable to what's actually needed, and thus reducing the amount of copied data. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Taehee Yoo authored
NETDEV_HW_ADDR_T_SLAVE is not used anymore, remove it. Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
David S. Miller authored
Johannes Berg says: ==================== genetlink per-op policy export Here's a respin, now including Jakub's patch last so that it will do the right thing from the start. The first patch remains the same, of course; the others have mostly some rebasing going on, except for the actual export patch (patch 4) which is adjusted per Jakub's review comments about exporting the policy only if it's actually used for do/dump. To see that, the dump for "nlctrl" (i.e. the generic netlink control) is instructive, because the ops are this: { .cmd = CTRL_CMD_GETFAMILY, .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, .policy = ctrl_policy_family, .maxattr = ARRAY_SIZE(ctrl_policy_family) - 1, .doit = ctrl_getfamily, .dumpit = ctrl_dumpfamily, }, { .cmd = CTRL_CMD_GETPOLICY, .policy = ctrl_policy_policy, .maxattr = ARRAY_SIZE(ctrl_policy_policy) - 1, .start = ctrl_dumppolicy_start, .dumpit = ctrl_dumppolicy, .done = ctrl_dumppolicy_done, }, So we exercise both "don't have doit" and "GENL_DONT_VALIDATE_DUMP" parts, and get (with the current genl patch): $ genl ctrl policy name nlctrl ID: 0x10 op 3 policies: do=0 ID: 0x10 op 10 policies: dump=1 ID: 0x10 policy[0]:attr[1]: type=U16 range:[0,65535] ID: 0x10 policy[0]:attr[2]: type=NUL_STRING max len:15 ID: 0x10 policy[1]:attr[1]: type=U16 range:[0,65535] ID: 0x10 policy[1]:attr[2]: type=NUL_STRING max len:15 ID: 0x10 policy[1]:attr[10]: type=U32 range:[0,4294967295] ==================== Reviewed-by:Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
Right now CTRL_CMD_GETPOLICY can only dump the family-wide policy. Support dumping policy of a specific op. v3: - rebase after per-op policy export and handle that v2: - make cmd U32, just in case. v1: - don't echo op in the output in a naive way, this should make it cleaner to extend the output format for dumping policies for all the commands at once in the future. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
Add support for per-op policy dumping. The data is pretty much as before, except that now the assumption that the policy with index 0 is "the" policy no longer holds - you now need to look at the new CTRL_ATTR_OP_POLICY attribute which is a nested attr (indexed by op) containing attributes for do and dump policies. When a single op is requested, the CTRL_ATTR_OP_POLICY will be added in the same way, since do and dump policies may differ. v2: - conditionally advertise per-command policies only if there actually is a policy being used for the do/dump and it's present at all Signed-off-by:
-
Johannes Berg authored
We'll need this later for the per-op policy index dump. Reviewed-by:
-
Johannes Berg authored
Rework the policy dump code a bit to support adding multiple policies to a single dump, in order to e.g. support per-op policies in generic netlink. v2: - move kernel-doc to implementation [Jakub] - squash the first patch to not flip-flop on the prototype [Jakub] - merge netlink_policy_dump_get_policy_idx() with the old get_policy_idx() we already had - rebase without Jakub's patch to have per-op dump Signed-off-by:
-
Johannes Berg authored
The maxtype is really an integral part of the policy, and while we haven't gotten into a situation yet where this happens, it seems that some developer might eventually have two places pointing to identical policies, with different maxattr to exclude some attrs in one of the places. Even if not, it's really the right thing to compare both since the two data items fundamentally belong together. v2: - also do the proper comparison in get_policy_idx() Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== genetlink: support per-command policy dump The objective of this series is to dump ethtool policies to be able to tell which flags are supported by the kernel. Current release adds ETHTOOL_FLAG_STATS for dumping extra stats, but because of strict checking we need to make sure that the flag is actually supported before setting it in a request. Ethtool policies are per command, and so far only dumping family policies was supported. The series adds new set of "light" ops to genl families which don't have all the callbacks, and won't have the policy. Most of families are then moved to these ops. This gives us 4096B in savings on an allyesconfig build (not counting the growth that would have happened when policy is added): text data bss dec hex 244415581 227958581 78372980 550747142 20d3bc06 244415581 227962677 78372980 550751238 20d3cc06 Next 5 patches deal the dumping per-op policy. v3: The actually patch to dump per-op policy was taken out and will come in a series from Johannes, to make sure uAPI is consistent from the start. For dump-specific policies I think it should be fine to add a new pair of members to the "full" ops, and not overthink it. v2: - remove the stale comment in taskstats - split patch 8 -> 8, 9 - now the getfamily policy is also in the op - make cmd u32 v1: - replace remaining uses of "light" with "small" - fix dump (ops can't be on the stack there) - coding changes in patch 4 - new patch 7 - don't echo op in responses - to make dump all easier Dave - this series will cause a very trivial conflict with the patch I sent to net. Both sides add some kdoc to struct genl_ops so we'll need to keep it all. I'm sending this already because I also need to restructure ethool policies in time for 5.10 if we want to use it for the stats flag. ==================== Signed-off-by: -
Jakub Kicinski authored
In preparation for adding a new attribute to CTRL_CMD_GETPOLICY split the policies for getpolicy and getfamily apart. This will cause a slight user-visible change in that dumping the policies will switch from per family to per op, but supposedly sniffer-type applications (which are the main use case for policy dumping thus far) should support both, anyway. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Jakub Kicinski authored
Attributes are already parsed based on the policy specified in the family and ready-to-use in info->attrs. No need to call genlmsg_parse() again. Signed-off-by:
-
Jakub Kicinski authored
commit 3b0f31f2 ("genetlink: make policy common to family") had to work around removal of policy from ops by parsing in the pre_doit callback. Now that policy is back in full ops we can switch again. Set maxattr to actual size of the policies - both commands set GENL_DONT_VALIDATE_STRICT so out of range attributes will be silently ignored, anyway. v2: - remove stale comment Suggested-by:
-
Jakub Kicinski authored
Add policy to the struct genl_ops structure, this time with maxattr, so it can be used properly. Propagate .policy and .maxattr from the family in genl_get_cmd() if needed, this way the rest of the code does not have to worry if the policy is per op or global. Signed-off-by:
-
Jakub Kicinski authored
The structure of ctrl_dumppolicy() is clearly split into init and dumping. Move the init to a .start callback for clarity, it's a more idiomatic netlink dump code structure. Signed-off-by:
-
Jakub Kicinski authored
Whenever netlink dump uses more than 2 cb->args[] entries code gets hard to read. We're about to add more state to ctrl_dumppolicy() so create a structure. Since the structure is typed and clearly named we can remove the local fam_id variable and use ctx->fam_id directly. v3: - rebase onto explicit free fix v1: - s/nl_policy_dump/netlink_policy_dump_state/ - forward declare struct netlink_policy_dump_state, and move from passing unsigned long to actual pointer type - add build bug on - u16 fam_id - s/args/ctx/ Signed-off-by:
-
Jakub Kicinski authored
Bulk of the genetlink users can use smaller ops, move them. Signed-off-by:
-
Jakub Kicinski authored
We want to add maxattr and policy back to genl_ops, to enable dumping per command policy to user space. This, however, would cause bloat for all the families with global policies. Introduce smaller version of ops (half the size of genl_ops). Translate these smaller ops into a full blown struct before use in the core. v1: - use struct assignment - put a full copy of the op in struct genl_dumpit_info - s/light/small/ Signed-off-by:
-
Jakub Kicinski authored
There are holes and oversized members in struct genl_family. Before: /* size: 104, cachelines: 2, members: 16 */ After: /* size: 88, cachelines: 2, members: 16 */ The command field in struct genlmsghdr is a u8, so no point in the operation count being 32 bit. Also operation 0 is usually undefined, so we only need 255 entries. netnsok and parallel_ops are only ever initialized to true. We can grow the fields as needed, compiler should warn us if someone tries to assign larger constants. Signed-off-by:
-
- 02 Oct, 2020 22 commits
-
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-eth: add devlink parser error drop trap support This patch set adds support in the dpaa2-eth driver for a new group of devlink drop traps - PARSER_ERROR_DROPS. The first patch adds a new generic trap group and associated traps, their definitions in devlink and their corresponding entries in the Documentation. Because there might be more devices (besides DPAA2) which do not support changing the action independently on each trap, a nre devlink callback is introduced - .trap_group_action_set(). If this callback is populated, it will take precedence over .trap_action_set() when the user requests changing the action on all the traps in a group. The next patches add basic linkage with devlink for the dpaa2-eth driver and support for the newly added PARSER_ERROR_DROPS. Nothing special here, just setting up the Rx error queue, interpreting the parse result, and then reporting any frame received on that queue to devlink. Changes in v2: - fix build error in 3/4 Changes in v3: - removed a commented line in 4/4 - added an extack in 4/4 - fixed up a warning on 32bit in 4/4 - reworded the trap_group_action_set() description in 2/4 ==================== Signed-off-by: -
Ioana Ciornei authored
Add support for the new group of devlink traps - PARSER_ERROR_DROPS. This consists of registering the array of parser error drops supported, controlling their action through the .trap_group_action_set() callback and reporting an erroneous skb received on the error queue appropriately. DPAA2 devices do not support controlling the action of independent parser error traps, thus the .trap_action_set() callback just returns an EOPNOTSUPP while .trap_group_action_set() actually notifies the hardware what it should do with a frame marked as having a header error. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Ioana Ciornei authored
Add basic support in dpaa2-eth for devlink. For the moment, just register the device with devlink, add the corresponding devlink port and implement the .info_get() callback. Signed-off-by:
-
Ioana Ciornei authored
Add a new devlink callback, .trap_group_action_set(), which can be used by device drivers which do not support controlling the action (drop, trap) on each trap but rather on the entire group trap. If this new callback is populated, it will take precedence over the .trap_action_set() callback when the user requests a change of all the traps in a group. Signed-off-by:
-
Ioana Ciornei authored
Add parser error drop packet traps, so that capable device driver could register them with devlink. The new packet trap group holds any drops of packets which were marked by the device as erroneous during header parsing. Add documentation for every added packet trap and packet trap group. Signed-off-by:
-
David S. Miller authored
Shannon Nelson says: ==================== ionic error recovery This set of patches comes mostly from error recovery path testing, as well as a couple of upstream review comments. ==================== Signed-off-by: -
Shannon Nelson authored
If the new firmware image downladed for update is corrupted or is a bad format, the download process will report a status code specifically for that. Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Use the lif's ident information for the uc and mc filter counts rather than the ionic's version, to be sure we're getting the info that is specific to this lif. While we're thinking about it, add some missing error checking where we get the lif's identity information. Signed-off-by:
-
Shannon Nelson authored
After we do a fw upgrade and refill the ionic->ident.dev, we also need to update the other identity info. Since the lif identity needs to be updated each time the ionic identity is refreshed, we can pull it into ionic_identify(). The debugfs entry is moved so that it doesn't cause an error message when the data is refreshed after the fw upgrade. Signed-off-by:
-
Shannon Nelson authored
Some time ago we short-circuited the queue disables on a timeout error in order to not have to wait on every queue when we already know it will time out. However, this meant that we're not properly stopping all the interrupts and napi contexts. This changes queue disable to always call ionic_qcq_disable() and to give it an argument to know when to not do the adminq request. Signed-off-by:
-
Shannon Nelson authored
There are a couple of error recovery paths that can come through ionic_qcq_disable() without having set up the qcq, so we need to make sure we have a valid qcq pointer before using it. Signed-off-by:
-
Shannon Nelson authored
Clear our link check requested flag on an allocation error. We end up dropping this link check request, but that should be fine as our watchdog will come back a few seconds later and request it again. Reported-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Shannon Nelson authored
Check through our work list for additional items. This normally will only have one item, but occasionally may have another job waiting. There really is no need reschedule ourself here. Reported-by:
-
Shannon Nelson authored
The event notification queue is set up a little differently in the NIC and so the notifyq q and cq descriptor structures need to be contiguous, which got missed in an earlier patch that separated out the q and cq descriptor allocations. That patch was aimed at making the big tx and rx descriptor queue allocations easier to manage - the notifyq is much smaller and doesn't need to be split. This patch simply adds an if/else and slightly different code for the notifyq descriptor allocation. Fixes: ea5a8b09 ("ionic: reduce contiguous memory allocation requirement") Signed-off-by:
-
David S. Miller authored
Julian Wiedmann says: =================== s390/net: updates 2020-10-01 Patches 1-3 enable qeth to also support the .set_channels() ethtool callback for OSA devices. This completes support for the full range of device types. The other patches are just the usual mix of cleanups. (Even one for ctcm!) =================== Signed-off-by: -
Vasily Gorbik authored
drivers/s390/net/ctcm_fsms.h: fsm_action_nop - only declaration left after commit 04885948 ("ctc: removal of the old ctc driver") drivers/s390/net/ctcm_mpc.h: ctcmpc_open - only declaration left after commit 293d984f ("ctcm: infrastructure for replaced ctc driver") Reviewed-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
- Add/delete some blanks, white spaces and braces. - Fix misindentations. - Adjust a deprecated header include, and htons() conversion. - Remove extra 'return' statements. Signed-off-by:
-
Julian Wiedmann authored
Replace our custom version of netdev_name(). Once we started to allocate the netdev at probe time with commit d3d1b205 ("s390/qeth: allocate netdevice early"), this stopped working as intended anyway. Signed-off-by:
-
Julian Wiedmann authored
The discipline struct is a fixed group of function pointers. So declare the L2 and L3 disciplines as constant. Signed-off-by:
-
Julian Wiedmann authored
For OSA devices that are _not_ configured in prio-queue mode, give users the option of selecting the number of active TX queues. This requires setting up the HW queues with a reasonable default QoS value in the QIB's PQUE parm area. As with the other device types, we bring up the device with a minimal number of TX queues for compatibility reasons. Signed-off-by:
-
Julian Wiedmann authored
Use a proper struct, and only program the QIB extensions for devices where they are supported. Signed-off-by:
-
Julian Wiedmann authored
When re-initializing a device, we can hit a situation where qeth_osa_set_output_queues() detects that it supports more or less HW TX queues than before. Right now we adjust dev->real_num_tx_queues from right there, but 1. it's getting more & more complicated to cover all cases, and 2. we can't re-enable the actually expected number of TX queues later because we lost the needed information. So keep track of the wanted TX queues (on initial setup, and whenever its changed via .set_channels), and later use that information when re-enabling the netdevice. Signed-off-by:
-
