- 06 Jan, 2017 35 commits
-
-
Theodore Ts'o authored
commit 5aee0f8a upstream. Fix a large number of problems with how we handle mount options in the superblock. For one, if the string in the superblock is long enough that it is not null terminated, we could run off the end of the string and try to interpret superblocks fields as characters. It's unlikely this will cause a security problem, but it could result in an invalid parse. Also, parse_options is destructive to the string, so in some cases if there is a comma-separated string, it would be modified in the superblock. (Fortunately it only happens on file systems with a 1k block size.) Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Theodore Ts'o authored
commit cd6bb35b upstream. Centralize the checks for inodes_per_block and be more strict to make sure the inodes_per_block_group can't end up being zero. Signed-off-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
Chandan Rajendra authored
commit 30a9d7af upstream. The number of 'counters' elements needed in 'struct sg' is super_block->s_blocksize_bits + 2. Presently we have 16 'counters' elements in the array. This is insufficient for block sizes >= 32k. In such cases the memcpy operation performed in ext4_mb_seq_groups_show() would cause stack memory corruption. Fixes: c9de560dSigned-off-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Chandan Rajendra authored
commit 69e43e8c upstream. 'border' variable is set to a value of 2 times the block size of the underlying filesystem. With 64k block size, the resulting value won't fit into a 16-bit variable. Hence this commit changes the data type of 'border' to 'unsigned int'. Fixes: c9de560dSigned-off-by:
-
Alex Porosanu authored
commit d128af17 upstream. The AEAD givenc descriptor relies on moving the IV through the output FIFO and then back to the CTX2 for authentication. The SEQ FIFO STORE could be scheduled before the data can be read from OFIFO, especially since the SEQ FIFO LOAD needs to wait for the SEQ FIFO LOAD SKIP to finish first. The SKIP takes more time when the input is SG than when it's a contiguous buffer. If the SEQ FIFO LOAD is not scheduled before the STORE, the DECO will hang waiting for data to be available in the OFIFO so it can be transferred to C2. In order to overcome this, first force transfer of IV to C2 by starting the "cryptlen" transfer first and then starting to store data from OFIFO to the output buffer. Fixes: 1acebad3 ("crypto: caam - faster aead implementation") Signed-off-by:
Alex Porosanu <alexandru.porosanu@nxp.com> Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric W. Biederman authored
commit 64b875f7 upstream. When the flag PT_PTRACE_CAP was added the PTRACE_TRACEME path was overlooked. This can result in incorrect behavior when an application like strace traces an exec of a setuid executable. Further PT_PTRACE_CAP does not have enough information for making good security decisions as it does not report which user namespace the capability is in. This has already allowed one mistake through insufficient granulariy. I found this issue when I was testing another corner case of exec and discovered that I could not get strace to set PT_PTRACE_CAP even when running strace as root with a full set of caps. This change fixes the above issue with strace allowing stracing as root a setuid executable without disabling setuid. More fundamentaly this change allows what is allowable at all times, by using the correct information in it's decision. Fixes: 4214e42f96d4 ("v2.4.9.11 -> v2.4.9.12") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit bfedb589 upstream. During exec dumpable is cleared if the file that is being executed is not readable by the user executing the file. A bug in ptrace_may_access allows reading the file if the executable happens to enter into a subordinate user namespace (aka clone(CLONE_NEWUSER), unshare(CLONE_NEWUSER), or setns(fd, CLONE_NEWUSER). This problem is fixed with only necessary userspace breakage by adding a user namespace owner to mm_struct, captured at the time of exec, so it is clear in which user namespace CAP_SYS_PTRACE must be present in to be able to safely give read permission to the executable. The function ptrace_may_access is modified to verify that the ptracer has CAP_SYS_ADMIN in task->mm->user_ns instead of task->cred->user_ns. This ensures that if the task changes it's cred into a subordinate user namespace it does not become ptraceable. The function ptrace_attach is modified to only set PT_PTRACE_CAP when CAP_SYS_PTRACE is held over task->mm->user_ns. The intent of PT_PTRACE_CAP is to be a flag to note that whatever permission changes the task might go through the tracer has sufficient permissions for it not to be an issue. task->cred->user_ns is always the same as or descendent of mm->user_ns. Which guarantees that having CAP_SYS_PTRACE over mm->user_ns is the worst case for the tasks credentials. To prevent regressions mm->dumpable and mm->user_ns are not considered when a task has no mm. As simply failing ptrace_may_attach causes regressions in privileged applications attempting to read things such as /proc/<pid>/stat Acked-by:
Kees Cook <keescook@chromium.org> Tested-by:
Cyrill Gorcunov <gorcunov@openvz.org> Fixes: 8409cca7 ("userns: allow ptrace from non-init user namespaces") Signed-off-by:
-
NeilBrown authored
commit bcc7f5b4 upstream. bdev->bd_contains is not stable before calling __blkdev_get(). When __blkdev_get() is called on a parition with ->bd_openers == 0 it sets bdev->bd_contains = bdev; which is not correct for a partition. After a call to __blkdev_get() succeeds, ->bd_openers will be > 0 and then ->bd_contains is stable. When FMODE_EXCL is used, blkdev_get() calls bd_start_claiming() -> bd_prepare_to_claim() -> bd_may_claim() This call happens before __blkdev_get() is called, so ->bd_contains is not stable. So bd_may_claim() cannot safely use ->bd_contains. It currently tries to use it, and this can lead to a BUG_ON(). This happens when a whole device is already open with a bd_holder (in use by dm in my particular example) and two threads race to open a partition of that device for the first time, one opening with O_EXCL and one without. The thread that doesn't use O_EXCL gets through blkdev_get() to __blkdev_get(), gains the ->bd_mutex, and sets bdev->bd_contains = bdev; Immediately thereafter the other thread, using FMODE_EXCL, calls bd_start_claiming() from blkdev_get(). This should fail because the whole device has a holder, but because bdev->bd_contains == bdev bd_may_claim() incorrectly reports success. This thread continues and blocks on bd_mutex. The first thread then sets bdev->bd_contains correctly and drops the mutex. The thread using FMODE_EXCL then continues and when it calls bd_may_claim() again in: BUG_ON(!bd_may_claim(bdev, whole, holder)); The BUG_ON fires. Fix this by removing the dependency on ->bd_contains in bd_may_claim(). As bd_may_claim() has direct access to the whole device, it can simply test if the target bdev is the whole device. Fixes: 6b4517a7 ("block: implement bd_claiming and claiming block") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Wang Xiaoguang authored
commit 69ae5e44 upstream. Indeed this just make the behavior similar to xfs when process has fatal signals pending, and it'll make fstests/generic/298 happy. Signed-off-by:
Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Josef Bacik authored
commit 4867268c upstream. Really there's lots of things that can go wrong here, kill all the BUG_ON()'s and replace the logic ones with ASSERT()'s and return EIO instead. Signed-off-by:
Josef Bacik <jbacik@fb.com> [ switched to btrfs_err, errors go to common label ] Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Liu Bo authored
commit a958eab0 upstream. The extent buffer 'next' needs to be free'd conditionally. Signed-off-by:
-
Josef Bacik authored
commit 6bdf131f upstream. We don't track the reloc roots in any sort of normal way, so the only way the root/commit_root nodes get free'd is if the relocation finishes successfully and the reloc root is deleted. Fix this by free'ing them in free_reloc_roots. Thanks, Signed-off-by:
-
Liu Bo authored
commit 3561b9db upstream. When relocating tree blocks, we firstly get block information from back references in the extent tree, we then search fs tree to try to find all parents of a block. However, if fs tree is corrupted, eg. if there're some missing items, we could come across these WARN_ONs and BUG_ONs. This makes us print some error messages and return gracefully from balance. Signed-off-by:
-
Liu Bo authored
commit 49303381 upstream. Currently we allow inconsistence about mixed flag (BTRFS_BLOCK_GROUP_METADATA | BTRFS_BLOCK_GROUP_DATA). We'd get ENOSPC if block group has mixed flag and btrfs doesn't. If that happens, we have one space_info with mixed flag and another space_info only with BTRFS_BLOCK_GROUP_METADATA, and global_block_rsv.space_info points to the latter one, but all bytes from block_group contributes to the mixed space_info, thus all the allocation will fail with ENOSPC. This adds a check for the above case. Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
-
Liu Bo authored
commit 2571e739 upstream. So we can read a btree block via readahead or intentional read, and we can end up with a memory leak when something happens as follows, 1) readahead starts to read block A but does not wait for read completion, 2) btree_readpage_end_io_hook finds that block A is corrupted, and it needs to clear all block A's pages' uptodate bit. 3) meanwhile an intentional read kicks in and checks block A's pages' uptodate to decide which page needs to be read. 4) when some pages have the uptodate bit during 3)'s check so 3) doesn't count them for eb->io_pages, but they are later cleared by 2) so we has to readpage on the page, we get the wrong eb->io_pages which results in a memory leak of this block. This fixes the problem by firstly getting all pages's locking and then checking pages' uptodate bit. t1(readahead) t2(readahead endio) t3(the following read) read_extent_buffer_pages end_bio_extent_readpage for pg in eb: for page 0,1,2 in eb: if pg is uptodate: btree_readpage_end_io_hook(pg) num_reads++ if uptodate: eb->io_pages = num_reads SetPageUptodate(pg) _______________ for pg in eb: for page 3 in eb: read_extent_buffer_pages if pg is NOT uptodate: btree_readpage_end_io_hook(pg) for pg in eb: __extent_read_full_page(pg) sanity check reports something wrong if pg is uptodate: clear_extent_buffer_uptodate(eb) num_reads++ for pg in eb: eb->io_pages = num_reads ClearPageUptodate(page) _______________ for pg in eb: if pg is NOT uptodate: __extent_read_full_page(pg) So t3's eb->io_pages is not consistent with the number of pages it's reading, and during endio(), atomic_dec_and_test(&eb->io_pages) will get a negative number so that we're not able to free the eb. Signed-off-by:
-
Richard Watts authored
commit 035cd485 upstream. The OMAP36xx DPLL5, driving EHCI USB, can be subject to a long-term frequency drift. The frequency drift magnitude depends on the VCO update rate, which is inversely proportional to the PLL divider. The kernel DPLL configuration code results in a high value for the divider, leading to a long term drift high enough to cause USB transmission errors. In the worst case the USB PHY's ULPI interface can stop responding, breaking USB operation completely. This manifests itself on the Beagleboard xM by the LAN9514 reporting 'Cannot enable port 2. Maybe the cable is bad?' in the kernel log. Errata sprz319 advisory 2.1 documents PLL values that minimize the drift. Use them automatically when DPLL5 is used for USB operation, which we detect based on the requested clock rate. The clock framework will still compute the PLL parameters and resulting rate as usual, but the PLL M and N values will then be overridden. This can result in the effective clock rate being slightly different than the rate cached by the clock framework, but won't cause any adverse effect to USB operation. Signed-off-by:
Richard Watts <rrw@kynesim.co.uk> [Upported from v3.2 to v4.9] Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
Ladislav Michl <ladis@linux-mips.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Cc: Adam Ford <aford173@gmail.com> Signed-off-by:
-
Kai-Heng Feng authored
commit 5e0ad0d8 upstream. Commit [64047d7f ALSA: hda - ignore the assoc and seq when comparing pin configurations] intented to ignore both seq and assoc at pin comparing, but it only ignored seq. So that commit may still fail to match pins on some machines. Change the bitmask to also ignore assoc. v2: Use macro to do bit masking. Thanks to Hui Wang for the analysis. Fixes: 64047d7f ("ALSA: hda - ignore the assoc and seq when comparing...") Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit f73cd43a upstream. HP Z1 Gen3 AiO with Conexant codec doesn't give an unsolicited event to the headset mic pin upon the jack plugging, it reports only to the headphone pin. It results in the missing mic switching. Let's fix up by simply gating the jack event. Signed-off-by:
-
Hui Wang authored
commit 989dbe4a upstream. This group of new pins is not in the pin quirk table yet, adding them to the pin quirk table to fix the headset-mic problem. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Hui Wang authored
commit 64047d7f upstream. More and more pin configurations have been adding to the pin quirk table, lots of them are only different from assoc and seq, but they all apply to the same QUIRK_FIXUP, if we don't compare assoc and seq when matching pin configurations, it will greatly reduce the pin quirk table size. We have tested this change on a couple of Dell laptops, it worked well. Signed-off-by:
-
Sven Hahne authored
commit b5337cfe upstream. I'm using an Alienware 15 R2 and had to use the alienware quirks to get my headphone output working. I fixed it by adding, SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2 2016", QUIRK_ALIENWARE) to the patch. Signed-off-by:
Sven Hahne <hahne@zeitkunst.eu> Signed-off-by:
-
Jussi Laako authored
commit 995c6a7f upstream. Sampling rate changes after first set one are not reflected to the hardware, while driver and ALSA think the rate has been changed. Fix the problem by properly stopping the interface at the beginning of prepare call, allowing new rate to be set to the hardware. This keeps the hardware in sync with the driver. Signed-off-by:
Jussi Laako <jussi@sonarnerd.net> Signed-off-by:
-
Con Kolivas authored
commit 82ffb6fc upstream. The Logitech QuickCam Communicate Deluxe/S7500 microphone fails with the following warning. [ 6.778995] usb 2-1.2.2.2: Warning! Unlikely big volume range (=3072), cval->res is probably wrong. [ 6.778996] usb 2-1.2.2.2: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1 Adding it to the list of devices in volume_control_quirks makes it work properly, fixing related typo. Signed-off-by:
Con Kolivas <kernel@kolivas.org> Signed-off-by:
-
Alan Stern authored
commit ccdb6be9 upstream. The UHCI controllers in Intel chipsets rely on a platform-specific non-PME mechanism for wakeup signalling. They can generate wakeup signals even though they don't support PME. We need to let the USB core know this so that it will enable runtime suspend for UHCI controllers. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
-
Felipe Balbi authored
commit e8f29bb7 upstream. usb_endpoint_maxp() returns wMaxPacketSize in its raw form. Without taking into consideration that it also contains other bits reserved for isochronous endpoints. This patch fixes one occasion where this is a problem by making sure that we initialize ep->maxpacket only with lower 10 bits of the value returned by usb_endpoint_maxp(). Note that seperate patches will be necessary to audit all call sites of usb_endpoint_maxp() and make sure that usb_endpoint_maxp() only returns lower 10 bits of wMaxPacketSize. Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Peter Chen authored
commit f1d3861d upstream. The current error handling flow uses incorrect goto label, fix it Fixes: d12a8727 ("usb: gadget: function: Remove redundant usb_free_all_descriptors") Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Mathias Nyman authored
commit 37be6676 upstream. USB-3 does not have any link state that will avoid negotiating a connection with a plugged-in cable but will signal the host when the cable is unplugged. For USB-3 we used to first set the link to Disabled, then to RxDdetect to be able to detect cable connects or disconnects. But in RxDetect the connected device is detected again and eventually enabled. Instead set the link into U3 and disable remote wakeups for the device. This is what Windows does, and what Alan Stern suggested. Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Nathaniel Quillin authored
commit 30121604 upstream. Add device-id entry for GW Instek AFG-125, which has a byte swapped bInterfaceSubClass (0x20). Signed-off-by:
Nathaniel Quillin <ndq@google.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Johan Hovold authored
commit 6774d5f5 upstream. Kill urbs and disable read before returning from open on failure to retrieve the line state. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Giuseppe Lippolis authored
commit d8a12b71 upstream. Adding registration for 3G modem DWM-158 in usb-serial-option Signed-off-by:
Giuseppe Lippolis <giu.lippolis@gmail.com> Signed-off-by:
-
Daniele Palmas authored
commit 5b09eff0 upstream. This patch adds support for PIDs 0x1040, 0x1041 of Telit LE922A. Since the interface positions are the same than the ones used for other Telit compositions, previous defined blacklists are used. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Filipe Manana authored
commit 8d9eddad upstream. We were setting the qgroup_rescan_running flag to true only after the rescan worker started (which is a task run by a queue). So if a user space task starts a rescan and immediately after asks to wait for the rescan worker to finish, this second call might happen before the rescan worker task starts running, in which case the rescan wait ioctl returns immediatley, not waiting for the rescan worker to finish. This was making the fstest btrfs/022 fail very often. Fixes: d2c609b8 (btrfs: properly track when rescan worker is running) Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
-
David Sterba authored
commit ed0df618 upstream. The balance status item contains currently known filter values, but the stripes filter was unintentionally not among them. This would mean, that interrupted and automatically restarted balance does not apply the stripe filters. Fixes: dee32d0aSigned-off-by:
-
Robbie Ko authored
commit 2a7bf53f upstream. If a log tree has a layout like the following: leaf N: ... item 240 key (282 DIR_LOG_ITEM 0) itemoff 8189 itemsize 8 dir log end 1275809046 leaf N + 1: item 0 key (282 DIR_LOG_ITEM 3936149215) itemoff 16275 itemsize 8 dir log end 18446744073709551615 ... When we pass the value 1275809046 + 1 as the parameter start_ret to the function tree-log.c:find_dir_range() (done by replay_dir_deletes()), we end up with path->slots[0] having the value 239 (points to the last item of leaf N, item 240). Because the dir log item in that position has an offset value smaller than *start_ret (1275809046 + 1) we need to move on to the next leaf, however the logic for that is wrong since it compares the current slot to the number of items in the leaf, which is smaller and therefore we don't lookup for the next leaf but instead we set the slot to point to an item that does not exist, at slot 240, and we later operate on that slot which has unexpected content or in the worst case can result in an invalid memory access (accessing beyond the last page of leaf N's extent buffer). So fix the logic that checks when we need to lookup at the next leaf by first incrementing the slot and only after to check if that slot is beyond the last item of the current leaf. Signed-off-by:
Robbie Ko <robbieko@synology.com> Reviewed-by:
-
Maxim Patlasov authored
commit 2939e1a8 upstream. Problem statement: unprivileged user who has read-write access to more than one btrfs subvolume may easily consume all kernel memory (eventually triggering oom-killer). Reproducer (./mkrmdir below essentially loops over mkdir/rmdir): [root@kteam1 ~]# cat prep.sh DEV=/dev/sdb mkfs.btrfs -f $DEV mount $DEV /mnt for i in `seq 1 16` do mkdir /mnt/$i btrfs subvolume create /mnt/SV_$i ID=`btrfs subvolume list /mnt |grep "SV_$i$" |cut -d ' ' -f 2` mount -t btrfs -o subvolid=$ID $DEV /mnt/$i chmod a+rwx /mnt/$i done [root@kteam1 ~]# sh prep.sh [maxim@kteam1 ~]$ for i in `seq 1 16`; do ./mkrmdir /mnt/$i 2000 2000 & done [root@kteam1 ~]# for i in `seq 1 4`; do grep "kmalloc-128" /proc/slabinfo | grep -v dma; sleep 60; done kmalloc-128 10144 10144 128 32 1 : tunables 0 0 0 : slabdata 317 317 0 kmalloc-128 9992352 9992352 128 32 1 : tunables 0 0 0 : slabdata 312261 312261 0 kmalloc-128 24226752 24226752 128 32 1 : tunables 0 0 0 : slabdata 757086 757086 0 kmalloc-128 42754240 42754240 128 32 1 : tunables 0 0 0 : slabdata 1336070 1336070 0 The huge numbers above come from insane number of async_work-s allocated and queued by btrfs_wq_run_delayed_node. The problem is caused by btrfs_wq_run_delayed_node() queuing more and more works if the number of delayed items is above BTRFS_DELAYED_BACKGROUND. The worker func (btrfs_async_run_delayed_root) processes at least BTRFS_DELAYED_BATCH items (if they are present in the list). So, the machinery works as expected while the list is almost empty. As soon as it is getting bigger, worker func starts to process more than one item at a time, it takes longer, and the chances to have async_works queued more than needed is getting higher. The problem above is worsened by another flaw of delayed-inode implementation: if async_work was queued in a throttling branch (number of items >= BTRFS_DELAYED_WRITEBACK), corresponding worker func won't quit until the number of items < BTRFS_DELAYED_BACKGROUND / 2. So, it is possible that the func occupies CPU infinitely (up to 30sec in my experiments): while the func is trying to drain the list, the user activity may add more and more items to the list. The patch fixes both problems in straightforward way: refuse queuing too many works in btrfs_wq_run_delayed_node and bail out of worker func if at least BTRFS_DELAYED_WRITEBACK items are processed. Changed in v2: remove support of thresh == NO_THRESHOLD. Signed-off-by:
Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
- 15 Dec, 2016 5 commits
-
-
Greg Kroah-Hartman authored
-
David Michael authored
commit 57891633 upstream. Both asn1 headers are included by rsa_helper.c, so rsa_helper.o should explicitly depend on them. Signed-off-by:
David Michael <david.michael@coreos.com> Signed-off-by:
-
Michal Hocko authored
commit 777c6e0d upstream. Yu Zhao has noticed that __unregister_cpu_notifier only unregisters its notifiers when HOTPLUG_CPU=y while the registration might succeed even when HOTPLUG_CPU=n if MODULE is enabled. This means that e.g. zswap might keep a stale notifier on the list on the manual clean up during the pool tear down and thus corrupt the list. Resulting in the following [ 144.964346] BUG: unable to handle kernel paging request at ffff880658a2be78 [ 144.971337] IP: [<ffffffffa290b00b>] raw_notifier_chain_register+0x1b/0x40 <snipped> [ 145.122628] Call Trace: [ 145.125086] [<ffffffffa28e5cf8>] __register_cpu_notifier+0x18/0x20 [ 145.131350] [<ffffffffa2a5dd73>] zswap_pool_create+0x273/0x400 [ 145.137268] [<ffffffffa2a5e0fc>] __zswap_param_set+0x1fc/0x300 [ 145.143188] [<ffffffffa2944c1d>] ? trace_hardirqs_on+0xd/0x10 [ 145.149018] [<ffffffffa2908798>] ? kernel_param_lock+0x28/0x30 [ 145.154940] [<ffffffffa2a3e8cf>] ? __might_fault+0x4f/0xa0 [ 145.160511] [<ffffffffa2a5e237>] zswap_compressor_param_set+0x17/0x20 [ 145.167035] [<ffffffffa2908d3c>] param_attr_store+0x5c/0xb0 [ 145.172694] [<ffffffffa290848d>] module_attr_store+0x1d/0x30 [ 145.178443] [<ffffffffa2b2b41f>] sysfs_kf_write+0x4f/0x70 [ 145.183925] [<ffffffffa2b2a5b9>] kernfs_fop_write+0x149/0x180 [ 145.189761] [<ffffffffa2a99248>] __vfs_write+0x18/0x40 [ 145.194982] [<ffffffffa2a9a412>] vfs_write+0xb2/0x1a0 [ 145.200122] [<ffffffffa2a9a732>] SyS_write+0x52/0xa0 [ 145.205177] [<ffffffffa2ff4d97>] entry_SYSCALL_64_fastpath+0x12/0x17 This can be even triggered manually by changing /sys/module/zswap/parameters/compressor multiple times. Fix this issue by making unregister APIs symmetric to the register so there are no surprises. Fixes: 47e627bc ("[PATCH] hotplug: Allow modules to use the cpu hotplug notifiers even if !CONFIG_HOTPLUG_CPU") Reported-and-tested-by:
Yu Zhao <yuzhao@google.com> Signed-off-by:
Michal Hocko <mhocko@suse.com> Cc: linux-mm@kvack.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Streetman <ddstreet@ieee.org> Link: http://lkml.kernel.org/r/20161207135438.4310-1-mhocko@kernel.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Sven Eckelmann authored
commit c2d0f48a upstream. batadv_tt_prepare_tvlv_local_data can fail to allocate the memory for the new TVLV block. The caller is informed about this problem with the returned length of 0. Not checking this value results in an invalid memory access when either tt_data or tt_change is accessed. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 7ea7b4a1 ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Boris Brezillon authored
commit 7e251bb2 upstream. The current ndelay() macro definition has an extra semi-colon at the end of the line thus leading to a compilation error when ndelay is used in a conditional block without curly braces like this one: if (cond) ndelay(t); else ... which, after the preprocessor pass gives: if (cond) m68k_ndelay(t);; else ... thus leading to the following gcc error: error: 'else' without a previous 'if' Remove this extra semi-colon. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: c8ee038b ("m68k: Implement ndelay() based on the existing udelay() logic") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
