- 08 Jun, 2022 26 commits
-
-
Like Xu authored
Splitting the logic for determining the guest values is unnecessarily confusing, and potentially fragile. Perf should have full knowledge and control of what values are loaded for the guest. If we change .guest_get_msrs() to take a struct kvm_pmu pointer, then it can generate the full set of guest values by grabbing guest ds_area and pebs_data_cfg. Alternatively, .guest_get_msrs() could take the desired guest MSR values directly (ds_area and pebs_data_cfg), but kvm_pmu is vendor agnostic, so we don't see any reason to not just pass the pointer. Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Like Xu <like.xu@linux.intel.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Message-Id: <20220411101946.20262-4-likexu@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Like Xu authored
With PEBS virtualization, the guest PEBS records get delivered to the guest DS, and the host pmi handler uses perf_guest_cbs->is_in_guest() to distinguish whether the PMI comes from the guest code like Intel PT. No matter how many guest PEBS counters are overflowed, only triggering one fake event is enough. The fake event causes the KVM PMI callback to be called, thereby injecting the PEBS overflow PMI into the guest. KVM may inject the PMI with BUFFER_OVF set, even if the guest DS is empty. That should really be harmless. Thus guest PEBS handler would retrieve the correct information from its own PEBS records buffer. Cc: linux-perf-users@vger.kernel.org Originally-by:
Andi Kleen <ak@linux.intel.com> Co-developed-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
Like Xu <likexu@tencent.com> Message-Id: <20220411101946.20262-3-likexu@tencent.com> Signed-off-by:
-
Like Xu authored
Add support for EPT-Friendly PEBS, a new CPU feature that enlightens PEBS to translate guest linear address through EPT, and facilitates handling VM-Exits that occur when accessing PEBS records. More information can be found in the December 2021 release of Intel's SDM, Volume 3, 18.9.5 "EPT-Friendly PEBS". This new hardware facility makes sure the guest PEBS records will not be lost, which is available on Intel Ice Lake Server platforms (and later). KVM will check this field through perf_get_x86_pmu_capability() instead of hard coding the CPU models in the KVM code. If it is supported, the guest PEBS capability will be exposed to the guest. Guest PEBS can be enabled when and only when "EPT-Friendly PEBS" is supported and EPT is enabled. Cc: linux-perf-users@vger.kernel.org Signed-off-by:
-
Chao Gao authored
With IPI virtualization enabled, the processor emulates writes to APIC registers that would send IPIs. The processor sets the bit corresponding to the vector in target vCPU's PIR and may send a notification (IPI) specified by NDST and NV fields in target vCPU's Posted-Interrupt Descriptor (PID). It is similar to what IOMMU engine does when dealing with posted interrupt from devices. A PID-pointer table is used by the processor to locate the PID of a vCPU with the vCPU's APIC ID. The table size depends on maximum APIC ID assigned for current VM session from userspace. Allocating memory for PID-pointer table is deferred to vCPU creation, because irqchip mode and VM-scope maximum APIC ID is settled at that point. KVM can skip PID-pointer table allocation if !irqchip_in_kernel(). Like VT-d PI, if a vCPU goes to blocked state, VMM needs to switch its notification vector to wakeup vector. This can ensure that when an IPI for blocked vCPUs arrives, VMM can get control and wake up blocked vCPUs. And if a VCPU is preempted, its posted interrupt notification is suppressed. Note that IPI virtualization can only virualize physical-addressing, flat mode, unicast IPIs. Sending other IPIs would still cause a trap-like APIC-write VM-exit and need to be handled by VMM. Signed-off-by:
Chao Gao <chao.gao@intel.com> Signed-off-by:
Zeng Guang <guang.zeng@intel.com> Message-Id: <20220419154510.11938-1-guang.zeng@intel.com> Signed-off-by:
-
Zeng Guang authored
Basic test coverage of KVM_CAP_MAX_VCPU_ID cap. This capability can be enabled before vCPU creation and only allowed to set once. if assigned vcpu id is beyond KVM_CAP_MAX_VCPU_ID capability, vCPU creation will fail. Signed-off-by:
-
Zeng Guang authored
Introduce new max_vcpu_ids in KVM for x86 architecture. Userspace can assign maximum possible vcpu id for current VM session using KVM_CAP_MAX_VCPU_ID of KVM_ENABLE_CAP ioctl(). This is done for x86 only because the sole use case is to guide memory allocation for PID-pointer table, a structure needed to enable VMX IPI. By default, max_vcpu_ids set as KVM_MAX_VCPU_IDS. Suggested-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
-
Zeng Guang authored
kvm_arch_vcpu_precreate() targets to handle arch specific VM resource to be prepared prior to the actual creation of vCPU. For example, x86 platform may need do per-VM allocation based on max_vcpu_ids at the first vCPU creation. It probably leads to concurrency control on this allocation as multiple vCPU creation could happen simultaneously. From the architectual point of view, it's necessary to execute kvm_arch_vcpu_precreate() under protect of kvm->lock. Currently only arm64, x86 and s390 have non-nop implementations at the stage of vCPU pre-creation. Remove the lock acquiring in s390's design and make sure all architecture can run kvm_arch_vcpu_precreate() safely under kvm->lock without recrusive lock issue. Suggested-by:
-
Zeng Guang authored
Remove the condition check cpu_has_secondary_exec_ctrls(). Calling vmx_refresh_apicv_exec_ctrl() premises secondary controls activated and VMCS fields related to APICv valid as well. If it's invoked in wrong circumstance at the worst case, VMX operation will report VMfailValid error without further harmful impact and just functions as if all the secondary controls were 0. Suggested-by:
-
Zeng Guang authored
Upcoming Intel CPUs will support virtual x2APIC MSR writes to the vICR, i.e. will trap and generate an APIC-write VM-Exit instead of intercepting the WRMSR. Add support for handling "nodecode" x2APIC writes, which were previously impossible. Note, x2APIC MSR writes are 64 bits wide. Signed-off-by:
-
Robert Hoo authored
Add tertiary_exec_control field report in dump_vmcs(). Meanwhile, reorganize the dump output of VMCS category as follows. Before change: *** Control State *** PinBased=0x000000ff CPUBased=0xb5a26dfa SecondaryExec=0x061037eb EntryControls=0000d1ff ExitControls=002befff After change: *** Control State *** CPUBased=0xb5a26dfa SecondaryExec=0x061037eb TertiaryExec=0x0000000000000010 PinBased=0x000000ff EntryControls=0000d1ff ExitControls=002befff Reviewed-by:
Robert Hoo <robert.hu@linux.intel.com> Signed-off-by:
-
Robert Hoo authored
Check VMX features on tertiary execution control in VMCS config setup. Sub-features in tertiary execution control to be enabled are adjusted according to hardware capabilities although no sub-feature is enabled in this patch. EVMCSv1 doesn't support tertiary VM-execution control, so disable it when EVMCSv1 is in use. And define the auxiliary functions for Tertiary control field here, using the new BUILD_CONTROLS_SHADOW(). Reviewed-by:
-
Robert Hoo authored
The Tertiary VM-Exec Control, different from previous control fields, is 64 bit. So extend BUILD_CONTROLS_SHADOW() by adding a 'bit' parameter, to support both 32 bit and 64 bit fields' auxiliary functions building. Suggested-by:
-
Robert Hoo authored
A new 64-bit control field "tertiary processor-based VM-execution controls", is defined [1]. It's controlled by bit 17 of the primary processor-based VM-execution controls. Different from its brother VM-execution fields, this tertiary VM- execution controls field is 64 bit. So it occupies 2 vmx_feature_leafs, TERTIARY_CTLS_LOW and TERTIARY_CTLS_HIGH. Its companion VMX capability reporting MSR,MSR_IA32_VMX_PROCBASED_CTLS3 (0x492), is also semantically different from its brothers, whose 64 bits consist of all allow-1, rather than 32-bit allow-0 and 32-bit allow-1 [1][2]. Therefore, its init_vmx_capabilities() is a little different from others. [1] ISE 6.2 "VMCS Changes" https://www.intel.com/content/www/us/en/develop/download/intel-architecture-instruction-set-extensions-programming-reference.html [2] SDM Vol3. Appendix A.3 Reviewed-by:
-
Sean Christopherson authored
Add a comment to FNAME(sync_page) to explain why the TLB flushing logic conspiculously doesn't handle the scenario of guest protections being reduced. Specifically, if synchronizing a SPTE drops execute protections, KVM will not emit a TLB flush, whereas dropping writable or clearing A/D bits does trigger a flush via mmu_spte_update(). Architecturally, until the GPTE is implicitly or explicitly flushed from the guest's perspective, KVM is not required to flush any old, stale translations. Signed-off-by:
Jim Mattson <jmattson@google.com> Message-Id: <20220513195000.99371-3-seanjc@google.com> Signed-off-by:
-
Sean Christopherson authored
All of sync_page()'s existing checks filter out only !PRESENT gPTE, because without execute-only, all upper levels are guaranteed to be at least READABLE. However, if EPT with execute-only support is in use by L1, KVM can create an SPTE that is shadow-present but guest-inaccessible (RWX=0) if the upper level combined permissions are R (or RW) and the leaf EPTE is changed from R (or RW) to X. Because the EPTE is considered present when viewed in isolation, and no reserved bits are set, FNAME(prefetch_invalid_gpte) will consider the GPTE valid, and cause a not-present SPTE to be created. The SPTE is "correct": the guest translation is inaccessible because the combined protections of all levels yield RWX=0, and KVM will just redirect any vmexits to the guest. If EPT A/D bits are disabled, KVM can mistake the SPTE for an access-tracked SPTE, but again such confusion isn't fatal, as the "saved" protections are also RWX=0. However, creating a useless SPTE in general means that KVM messed up something, even if this particular goof didn't manifest as a functional bug. So, drop SPTEs whose new protections will yield a RWX=0 SPTE, and add a WARN in make_spte() to detect creation of SPTEs that will result in RWX=0 protections. Fixes: d95c5568 ("kvm: mmu: track read permission explicitly for shadow EPT page tables") Cc: David Matlack <dmatlack@google.com> Cc: Ben Gardon <bgardon@google.com> Signed-off-by:
-
Maciej S. Szmigiero authored
Add a KVM self-test that checks whether a nSVM L1 is able to successfully inject a software interrupt, a soft exception and a NMI into its L2 guest. In practice, this tests both the next_rip field consistency and L1-injected event with intervening L0 VMEXIT during its delivery: the first nested VMRUN (that's also trying to inject a software interrupt) will immediately trigger a L0 NPF. This L0 NPF will have zero in its CPU-returned next_rip field, which if incorrectly reused by KVM will trigger a #PF when trying to return to such address 0 from the interrupt handler. For NMI injection this tests whether the L1 NMI state isn't getting incorrectly mixed with the L2 NMI state if a L1 -> L2 NMI needs to be re-injected. Reviewed-by:
Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <d5f3d56528558ad8e28a9f1e1e4187f5a1e6770a.1651440202.git.maciej.szmigiero@oracle.com> Signed-off-by:
-
Maciej S. Szmigiero authored
A NMI that L1 wants to inject into its L2 should be directly re-injected, without causing L0 side effects like engaging NMI blocking for L1. It's also worth noting that in this case it is L1 responsibility to track the NMI window status for its L2 guest. Signed-off-by:
-
Sean Christopherson authored
In the IRQ injection tracepoint, differentiate between Hard IRQs and Soft "IRQs", i.e. interrupts that are reinjected after incomplete delivery of a software interrupt from an INTn instruction. Tag reinjected interrupts as such, even though the information is usually redundant since soft interrupts are only ever reinjected by KVM. Though rare in practice, a hard IRQ can be reinjected. Signed-off-by:
-
Sean Christopherson authored
Print the error code in the exception injection tracepoint if and only if the exception has an error code. Define the entire error code sequence as a set of formatted strings, print empty strings if there's no error code, and abuse __print_symbolic() by passing it an empty array to coerce it into printing the error code as a hex string. Signed-off-by:
-
Sean Christopherson authored
Trace exceptions that are re-injected, not just those that KVM is injecting for the first time. Debugging re-injection bugs is painful enough as is, not having visibility into what KVM is doing only makes things worse. Delay propagating pending=>injected in the non-reinjection path so that the tracing can properly identify reinjected exceptions. Signed-off-by:
-
Sean Christopherson authored
Re-inject INTn software interrupts instead of retrying the instruction if the CPU encountered an intercepted exception while vectoring the INTn, e.g. if KVM intercepted a #PF when utilizing shadow paging. Retrying the instruction is architecturally wrong e.g. will result in a spurious #DB if there's a code breakpoint on the INT3/O, and lack of re-injection also breaks nested virtualization, e.g. if L1 injects a software interrupt and vectoring the injected interrupt encounters an exception that is intercepted by L0 but not L1. Signed-off-by:
-
Sean Christopherson authored
Re-inject INT3/INTO instead of retrying the instruction if the CPU encountered an intercepted exception while vectoring the software exception, e.g. if vectoring INT3 encounters a #PF and KVM is using shadow paging. Retrying the instruction is architecturally wrong, e.g. will result in a spurious #DB if there's a code breakpoint on the INT3/O, and lack of re-injection also breaks nested virtualization, e.g. if L1 injects a software exception and vectoring the injected exception encounters an exception that is intercepted by L0 but not L1. Due to, ahem, deficiencies in the SVM architecture, acquiring the next RIP may require flowing through the emulator even if NRIPS is supported, as the CPU clears next_rip if the VM-Exit is due to an exception other than "exceptions caused by the INT3, INTO, and BOUND instructions". To deal with this, "skip" the instruction to calculate next_rip (if it's not already known), and then unwind the RIP write and any side effects (RFLAGS updates). Save the computed next_rip and use it to re-stuff next_rip if injection doesn't complete. This allows KVM to do the right thing if next_rip was known prior to injection, e.g. if L1 injects a soft event into L2, and there is no backing INTn instruction, e.g. if L1 is injecting an arbitrary event. Note, it's impossible to guarantee architectural correctness given SVM's architectural flaws. E.g. if the guest executes INTn (no KVM injection), an exit occurs while vectoring the INTn, and the guest modifies the code stream while the exit is being handled, KVM will compute the incorrect next_rip due to "skipping" the wrong instruction. A future enhancement to make this less awful would be for KVM to detect that the decoded instruction is not the correct INTn and drop the to-be-injected soft event (retrying is a lesser evil compared to shoving the wrong RIP on the exception stack). Reported-by:
-
Sean Christopherson authored
If NRIPS is supported in hardware but disabled in KVM, set next_rip to the next RIP when advancing RIP as part of emulating INT3 injection. There is no flag to tell the CPU that KVM isn't using next_rip, and so leaving next_rip is left as is will result in the CPU pushing garbage onto the stack when vectoring the injected event. Reviewed-by:
-
Sean Christopherson authored
Unwind the RIP advancement done by svm_queue_exception() when injecting an INT3 ultimately "fails" due to the CPU encountering a VM-Exit while vectoring the injected event, even if the exception reported by the CPU isn't the same event that was injected. If vectoring INT3 encounters an exception, e.g. #NP, and vectoring the #NP encounters an intercepted exception, e.g. #PF when KVM is using shadow paging, then the #NP will be reported as the event that was in-progress. Note, this is still imperfect, as it will get a false positive if the INT3 is cleanly injected, no VM-Exit occurs before the IRET from the INT3 handler in the guest, the instruction following the INT3 generates an exception (directly or indirectly), _and_ vectoring that exception encounters an exception that is intercepted by KVM. The false positives could theoretically be solved by further analyzing the vectoring event, e.g. by comparing the error code against the expected error code were an exception to occur when vectoring the original injected exception, but SVM without NRIPS is a complete disaster, trying to make it 100% correct is a waste of time. Reviewed-by:
-
Maciej S. Szmigiero authored
Don't BUG/WARN on interrupt injection due to GIF being cleared, since it's trivial for userspace to force the situation via KVM_SET_VCPU_EVENTS (even if having at least a WARN there would be correct for KVM internally generated injections). kernel BUG at arch/x86/kvm/svm/svm.c:3386! invalid opcode: 0000 [#1] SMP CPU: 15 PID: 926 Comm: smm_test Not tainted 5.17.0-rc3+ #264 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:svm_inject_irq+0xab/0xb0 [kvm_amd] Code: <0f> 0b 0f 1f 00 0f 1f 44 00 00 80 3d ac b3 01 00 00 55 48 89 f5 53 RSP: 0018:ffffc90000b37d88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88810a234ac0 RCX: 0000000000000006 RDX: 0000000000000000 RSI: ffffc90000b37df7 RDI: ffff88810a234ac0 RBP: ffffc90000b37df7 R08: ffff88810a1fa410 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff888109571000 R14: ffff88810a234ac0 R15: 0000000000000000 FS: 0000000001821380(0000) GS:ffff88846fdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f74fc550008 CR3: 000000010a6fe000 CR4: 0000000000350ea0 Call Trace: <TASK> inject_pending_event+0x2f7/0x4c0 [kvm] kvm_arch_vcpu_ioctl_run+0x791/0x17a0 [kvm] kvm_vcpu_ioctl+0x26d/0x650 [kvm] __x64_sys_ioctl+0x82/0xb0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Fixes: 219b65dc ("KVM: SVM: Improve nested interrupt injection") Cc: stable@vger.kernel.org Co-developed-by:
-
Maciej S. Szmigiero authored
The next_rip field of a VMCB is *not* an output-only field for a VMRUN. This field value (instead of the saved guest RIP) in used by the CPU for the return address pushed on stack when injecting a software interrupt or INT3 or INTO exception. Make sure this field gets synced from vmcb12 to vmcb02 when entering L2 or loading a nested state and NRIPS is exposed to L1. If NRIPS is supported in hardware but not exposed to L1 (nrips=0 or hidden by userspace), stuff vmcb02's next_rip from the new L2 RIP to emulate a !NRIPS CPU (which saves RIP on the stack as-is). Reviewed-by:
-
- 07 Jun, 2022 10 commits
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: pvdump and selftest improvements - add an interface to provide a hypervisor dump for secure guests - improve selftests to show tests
-
Paolo Bonzini authored
-
Paolo Bonzini authored
-
Maxim Levitsky authored
SVM uses a per-cpu variable to cache the current value of the tsc scaling multiplier msr on each cpu. Commit 1ab9287a ("KVM: X86: Add vendor callbacks for writing the TSC multiplier") broke this caching logic. Refactor the code so that all TSC scaling multiplier writes go through a single function which checks and updates the cache. This fixes the following scenario: 1. A CPU runs a guest with some tsc scaling ratio. 2. New guest with different tsc scaling ratio starts on this CPU and terminates almost immediately. This ensures that the short running guest had set the tsc scaling ratio just once when it was set via KVM_SET_TSC_KHZ. Due to the bug, the per-cpu cache is not updated. 3. The original guest continues to run, it doesn't restore the msr value back to its own value, because the cache matches, and thus continues to run with a wrong tsc scaling ratio. Fixes: 1ab9287a ("KVM: X86: Add vendor callbacks for writing the TSC multiplier") Signed-off-by:
-
Vitaly Kuznetsov authored
hyperv_clock doesn't always give a stable test result, especially with AMD CPUs. The test compares Hyper-V MSR clocksource (acquired either with rdmsr() from within the guest or KVM_GET_MSRS from the host) against rdtsc(). To increase the accuracy, increase the measured delay (done with nop loop) by two orders of magnitude and take the mean rdtsc() value before and after rdmsr()/KVM_GET_MSRS. Reported-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
-
Ben Gardon authored
Currently disabling dirty logging with the TDP MMU is extremely slow. On a 96 vCPU / 96G VM backed with gigabyte pages, it takes ~200 seconds to disable dirty logging with the TDP MMU, as opposed to ~4 seconds with the shadow MMU. When disabling dirty logging, zap non-leaf parent entries to allow replacement with huge pages instead of recursing and zapping all of the child, leaf entries. This reduces the number of TLB flushes required. and reduces the disable dirty log time with the TDP MMU to ~3 seconds. Opportunistically add a WARN() to catch GFNs that are mapped at a higher level than their max level. Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20220525230904.1584480-1-bgardon@google.com> Signed-off-by:
-
Jan Beulich authored
As noted (and fixed) a couple of times in the past, "=@cc<cond>" outputs and clobbering of "cc" don't work well together. The compiler appears to mean to reject such, but doesn't - in its upstream form - quite manage to yet for "cc". Furthermore two similar macros don't clobber "cc", and clobbering "cc" is pointless in asm()-s for x86 anyway - the compiler always assumes status flags to be clobbered there. Fixes: 989b5db2 ("x86/uaccess: Implement macros for CMPXCHG on user addresses") Signed-off-by:
Jan Beulich <jbeulich@suse.com> Message-Id: <485c0c0b-a3a7-0b7c-5264-7d00c01de032@suse.com> Signed-off-by:
-
Shaoqin Huang authored
When freeing obsolete previous roots, check prev_roots as intended, not the current root. Signed-off-by:
Shaoqin Huang <shaoqin.huang@intel.com> Fixes: 527d5cd7 ("KVM: x86/mmu: Zap only obsolete roots if a root shadow page is zapped") Message-Id: <20220607005905.2933378-1-shaoqin.huang@intel.com> Cc: stable@vger.kernel.org Reviewed-by:
-
Seth Forshee authored
A livepatch transition may stall indefinitely when a kvm vCPU is heavily loaded. To the host, the vCPU task is a user thread which is spending a very long time in the ioctl(KVM_RUN) syscall. During livepatch transition, set_notify_signal() will be called on such tasks to interrupt the syscall so that the task can be transitioned. This interrupts guest execution, but when xfer_to_guest_mode_work() sees that TIF_NOTIFY_SIGNAL is set but not TIF_SIGPENDING it concludes that an exit to user mode is unnecessary, and guest execution is resumed without transitioning the task for the livepatch. This handling of TIF_NOTIFY_SIGNAL is incorrect, as set_notify_signal() is expected to break tasks out of interruptible kernel loops and cause them to return to userspace. Change xfer_to_guest_mode_work() to handle TIF_NOTIFY_SIGNAL the same as TIF_SIGPENDING, signaling to the vCPU run loop that an exit to userpsace is needed. Any pending task_work will be run when get_signal() is called from exit_to_user_mode_loop(), so there is no longer any need to run task work from xfer_to_guest_mode_work(). Suggested-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Petr Mladek <pmladek@suse.com> Signed-off-by:
Seth Forshee <sforshee@digitalocean.com> Message-Id: <20220504180840.2907296-1-sforshee@digitalocean.com> Signed-off-by:
-
Alexey Kardashevskiy authored
A KVM device cleanup happens in either of two callbacks: 1) destroy() which is called when the VM is being destroyed; 2) release() which is called when a device fd is closed. Most KVM devices use 1) but Book3s's interrupt controller KVM devices (XICS, XIVE, XIVE-native) use 2) as they need to close and reopen during the machine execution. The error handling in kvm_ioctl_create_device() assumes destroy() is always defined which leads to NULL dereference as discovered by Syzkaller. This adds a checks for destroy!=NULL and adds a missing release(). This is not changing kvm_destroy_devices() as devices with defined release() should have been removed from the KVM devices list by then. Suggested-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
- 06 Jun, 2022 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull file descriptor fix from Al Viro: "Fix for breakage in #work.fd this window" * tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix the breakage in close_fd_get_file() calling conventions change
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull mm hotfixes from Andrew Morton: "Fixups for various recently-added and longer-term issues and a few minor tweaks: - fixes for material merged during this merge window - cc:stable fixes for more longstanding issues - minor mailmap and MAINTAINERS updates" * tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/oom_kill.c: fix vm_oom_kill_table[] ifdeffery x86/kexec: fix memory leak of elf header buffer mm/memremap: fix missing call to untrack_pfn() in pagemap_range() mm: page_isolation: use compound_nr() correctly in isolate_single_pageblock() mm: hugetlb_vmemmap: fix CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON MAINTAINERS: add maintainer information for z3fold mailmap: update Josh Poimboeuf's email
-
- 05 Jun, 2022 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull delay-accounting update from Andrew Morton: "A single featurette for delay accounting. Delayed a bit because, unusually, it had dependencies on both the mm-stable and mm-nonmm-stable queues" * tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: delayacct: track delays from write-protect copy
-
