- 08 Nov, 2016 37 commits
-
-
James Hogan authored
BugLink: http://bugs.launchpad.net/bugs/1634153 commit 91e4f1b6 upstream. When a guest TLB entry is replaced by TLBWI or TLBWR, we only invalidate TLB entries on the local CPU. This doesn't work correctly on an SMP host when the guest is migrated to a different physical CPU, as it could pick up stale TLB mappings from the last time the vCPU ran on that physical CPU. Therefore invalidate both user and kernel host ASIDs on other CPUs, which will cause new ASIDs to be generated when it next runs on those CPUs. We're careful only to do this if the TLB entry was already valid, and only for the kernel ASID where the virtual address it mapped is outside of the guest user address range. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
Seth Forshee <seth.forshee@canonical.com>
-
Thomas Huth authored
BugLink: http://bugs.launchpad.net/bugs/1634153 commit fa73c3b2 upstream. The MMCR2 register is available twice, one time with number 785 (privileged access), and one time with number 769 (unprivileged, but it can be disabled completely). In former times, the Linux kernel was using the unprivileged register 769 only, but since commit 8dd75ccb ("powerpc: Use privileged SPR number for MMCR2"), it uses the privileged register 785 instead. The KVM-PR code then of course also switched to use the SPR 785, but this is causing older guest kernels to crash, since these kernels still access 769 instead. So to support older kernels with KVM-PR again, we have to support register 769 in KVM-PR, too. Fixes: 8dd75ccbSigned-off-by:
Thomas Huth <thuth@redhat.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Uwe Kleine-König authored
BugLink: http://bugs.launchpad.net/bugs/1634153 commit 88003fb1 upstream. This fixes a compile failure: drivers/built-in.o: In function `wm8350_i2c_probe': core.c:(.text+0x828b0): undefined reference to `__devm_regmap_init_i2c' Makefile:953: recipe for target 'vmlinux' failed Fixes: 52b461b8 ("mfd: Add regmap cache support for wm8350") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Dan Carpenter authored
BugLink: http://bugs.launchpad.net/bugs/1634153 commit 9a6dc644 upstream. set_bit() and clear_bit() take the bit number so this code is really doing "1 << (1 << irq)" which is a double shift bug. It's done consistently so it won't cause a problem unless "irq" is more than 4. Fixes: 70c6cce0 ('mfd: Support 88pm80x in 80x driver') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Boris Brezillon authored
BugLink: http://bugs.launchpad.net/bugs/1634153 commit 2c2469bc upstream. readl_poll_timeout() calls usleep_range(), but regmap_atmel_hlcdc_reg_write() is called in atomic context (regmap spinlock held). Replace the readl_poll_timeout() call by readl_poll_timeout_atomic(). Fixes: ea31c0cf ("mfd: atmel-hlcdc: Implement config synchronization") Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Lu Baolu authored
BugLink: http://bugs.launchpad.net/bugs/1634153 commit 8dcc5ff8 upstream. Member "status" of struct usb_sg_request is managed by usb core. A spin lock is used to serialize the change of it. The driver could check the value of req->status, but should avoid changing it without the hold of the spinlock. Otherwise, it could cause race or error in usb core. This patch could be backported to stable kernels with version later than v3.14. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Roger Tseng <rogerable@realtek.com> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
-
Takashi Sakamoto authored
BugLink: http://bugs.launchpad.net/bugs/1634153 commit 8da08ca0 upstream. Currently, usb-line6 module exports an array of MIDI manufacturer ID and usb-pod module uses it. However, the declaration is not the definition in common header. The difference is explicit length of array. Although compiler calculates it and everything goes well, it's better to use the same representation between definition and declaration. This commit fills the length of array for usb-line6 module. As a small good sub-effect, this commit suppress below warnings from static analysis by sparse v0.5.0. sound/usb/line6/driver.c:274:43: error: cannot size expression sound/usb/line6/driver.c:275:16: error: cannot size expression sound/usb/line6/driver.c:276:16: error: cannot size expression sound/usb/line6/driver.c:277:16: error: cannot size expression Fixes: 705ececd ("Staging: add line6 usb driver") Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Anssi Hannula authored
BugLink: http://bugs.launchpad.net/bugs/1634153 commit eb1a74b7 upstream. The DragonFly quirk added in 42e3121d ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly") applies a custom dB map on the volume control when its range is reported as 0..50 (0 .. 0.2dB). However, there exists at least one other variant (hw v1.0c, as opposed to the tested v1.2) which reports a different non-sensical volume range (0..53) and the custom map is therefore not applied for that device. This results in all of the volume change appearing close to 100% on mixer UIs that utilize the dB TLV information. Add a fallback case where no dB TLV is reported at all if the control range is not 0..50 but still 0..N where N <= 1000 (3.9 dB). Also restrict the quirk to only apply to the volume control as there is also a mute control which would match the check otherwise. Fixes: 42e3121d ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly") Signed-off-by:
Anssi Hannula <anssi.hannula@iki.fi> Reported-by:
David W <regulars@d-dub.org.uk> Tested-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1634153 commit db685779 upstream. The pointer callbacks of ali5451 driver may return the value at the boundary occasionally, and it results in the kernel warning like snd_ali5451 0000:00:06.0: BUG: , pos = 16384, buffer size = 16384, period size = 1024 It seems that folding the position offset is enough for fixing the warning and no ill-effect has been seen by that. Reported-by:
Enrico Mioso <mrkiko.rs@gmail.com> Tested-by:
-
John Stultz authored
BugLink: http://bugs.launchpad.net/bugs/1634153 commit 58bfea95 upstream. In commit 27727df2 ("Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING"), I changed the logic to open-code the timekeeping_get_ns() function, but I forgot to include the unit conversion from cycles to nanoseconds, breaking the function's output, which impacts users like perf. This results in bogus perf timestamps like: swapper 0 [000] 253.427536: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426573: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426687: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426800: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426905: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427022: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427127: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427239: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427346: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427463: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 255.426572: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) Instead of more reasonable expected timestamps like: swapper 0 [000] 39.953768: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.064839: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.175956: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.287103: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.398217: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.509324: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.620437: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.731546: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.842654: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.953772: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 41.064881: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) Add the proper use of timekeeping_delta_to_ns() to convert the cycle delta to nanoseconds as needed. Thanks to Brendan and Alexei for finding this quickly after the v4.8 release. Unfortunately the problematic commit has landed in some -stable trees so they'll need this fix as well. Many apologies for this mistake. I'll be looking to add a perf-clock sanity test to the kselftest timers tests soon. Fixes: 27727df2 "timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING" Reported-by:
Brendan Gregg <bgregg@netflix.com> Reported-by:
Alexei Starovoitov <alexei.starovoitov@gmail.com> Tested-and-reviewed-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1475636148-26539-1-git-send-email-john.stultz@linaro.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
-
Colin Ian King authored
BugLink: http://bugs.launchpad.net/bugs/1633506 Enable module build of the Firmware Test Suite EFI test driver Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
-
Colin Ian King authored
BugLink: http://bugs.launchpad.net/bugs/1633506 This driver is used by the Firmware Test Suite (FWTS) for testing the UEFI runtime interfaces readiness of the firmware. This driver exports UEFI runtime service interfaces into userspace, which allows to use and test UEFI runtime services provided by the firmware. This driver uses the efi.<service> function pointers directly instead of going through the efivar API to allow for direct testing of the UEFI runtime service interfaces provided by the firmware. Details for FWTS are available from, <https://wiki.ubuntu.com/FirmwareTestSuite> Signed-off-by:
Ivan Hu <ivan.hu@canonical.com> Cc: joeyli <jlee@suse.com> Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> (backport from upstream commit ff6301da) Signed-off-by:
-
Masaki Ota authored
Issue reproduction procedure: 1. three or more fingers put on Touchpad. 2. release fingers from Touchpad. 3. move the cursor by one finger. 4. the cursor does not move. Cause: We do not notify multi fingers state correctly to input subsystem. For example, when three fingers release from Touchpad, fingers state is 3 -> 0. It needs to notify first, second and third finger's releasing state. Fix this by not breaking out on z axis and move x,y,z input handling code to the correct place so that it's in fact per-finger. BugLink: https://bugs.launchpad.net/bugs/1633321 [jkosina@suse.cz: reword changelog] Signed-off-by:
Masaki Ota <masaki.ota@jp.alps.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> (cherry picked from commit 9a54cf46) Signed-off-by:
Ying-Chun Liu (PaulLiu) <paul.liu@canonical.com> Acked-by:
-
Craig Magina authored
BugLink: https://launchpad.net/bugs/1632739Signed-off-by:
Craig Magina <craig.magina@canonical.com> Acked-by:
-
Iyappan Subramanian authored
BugLink: https://launchpad.net/bugs/1632739 Added path to the MDIO driver and Documentation file. Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> (cherry picked from commit 2efccc60 yakkety) Signed-off-by:
-
Iyappan Subramanian authored
BugLink: https://launchpad.net/bugs/1632739 Added mdio node for mdio driver. Also added phy-handle reference to the ethernet nodes. Removed unused clock node from storm sgenet1. Signed-off-by:
Fushen Chen <fchen@apm.com> Tested-by:
Toan Le <toanle@apm.com> Signed-off-by:
-
Iyappan Subramanian authored
BugLink: https://launchpad.net/bugs/1632739 Changed SGMII 1G get_settings to use phy_ethtool_gset. Changed SGMII 1G set_settings to use phy_ethtool_sset. Signed-off-by:
-
Iyappan Subramanian authored
BugLink: https://launchpad.net/bugs/1632739 This patch reuses the mdio read/write and phy_register functions and removed the local definitions. Signed-off-by:
-
Iyappan Subramanian authored
BugLink: https://launchpad.net/bugs/1632739 This patch enables MDIO driver by, - Selecting MDIO_XGENE - Changed open and close to use phy_start and phy_stop - Changed to use mac_ops->tx(rx)_enable and tx(rx)_disable Signed-off-by:
-
Iyappan Subramanian authored
BugLink: https://launchpad.net/bugs/1632739 This patch adds xgene_enet_check_phy_hanlde() function that checks whether MDIO driver is probed successfully and sets pdata->mdio_driver to true. If MDIO driver is not probed, ethernet driver falls back to backward compatibility mode. Since enum xgene_enet_cmd is used by MDIO driver, removing this from ethernet driver. Signed-off-by:
-
Iyappan Subramanian authored
BugLink: https://launchpad.net/bugs/1632739 Currently, SGMII based 1G rely on the hardware registers for link state and sometimes it's not reliable. To get most accurate link state, this interface has to use the MDIO bus to poll the PHY. In X-Gene SoC, MDIO bus is shared across RGMII and SGMII based 1G interfaces, so adding this driver to manage MDIO bus. This driver registers the mdio bus and registers the PHYs connected to it. Signed-off-by:
-
Iyappan Subramanian authored
BugLink: https://launchpad.net/bugs/1632739 This patch fixes clock reset sequence. - Added clock reset sequence for ACPI - Added delay in clock reset sequence to make sure pulse is generated - Added clk_unprepare_disable() in port shutdown to make sure clock increment/decrement counts are matching - Removed MII_MGMT_CONFIG programming, since it is not required - Fixed programming XGENET_CONFIG_REG to enable SGMII mode Signed-off-by:
-
Iyappan Subramanian authored
BugLink: https://launchpad.net/bugs/1632739 When the driver is configured as kernel module and when it gets unloaded and reloaded, kernel crash was observed. This patch addresses the software cleanup by doing the following, - Moved register_netdev call after hardware is ready - Since ndev is not ready, added set_irq_name to set irq name - Since ndev is not ready, changed mdio_bus->parent to pdev->dev - Replaced netif_start(stop)_queue by netif_tx_start(stop)_queues - Removed napi_del call since it's called by free_netdev - Added dev_close call, within remove - Added shutdown callback - Changed to use dmam_ APIs Signed-off-by:
-
Iyappan Subramanian authored
BugLink: https://launchpad.net/bugs/1632739 When the driver is configured as kernel module and when it gets unloaded and reloaded, kernel crash was observed. This patch address the hardware resource cleanups by doing the following, - Added mac_ops->clear() to do prefetch buffer clean up - Fixed delete freepool buffers logic - Reordered mac_enable and mac_disable - Added Tx completion ring free - Moved down delete_desc_rings after ring cleanup Signed-off-by:
-
Iyappan Subramanian authored
BugLink: https://launchpad.net/bugs/1632739 Since mac_init is too heavy to be called when the link changes, moved the speed_set configuration to a new function and added mac_ops->set_speed function pointer. This function will be called from adjust_link callback. Added cases for 10/100 support for SGMII based 1G interface. Signed-off-by:
-
Iyappan Subramanian authored
BugLink: https://launchpad.net/bugs/1632739 This patch fixes SG_RX_DV_GATE_REG_0_ADDR register offset and ring state field lengths. Signed-off-by:
-
Iyappan Subramanian authored
BugLink: https://launchpad.net/bugs/1632739 This patch fixes the race condition on updating the statistics counters by moving the counters to the ring structure. Signed-off-by:
-
Iyappan Subramanian authored
BugLink: https://launchpad.net/bugs/1632739 This patch addresses ununiform latency across queues by adding more queues to match with, upto number of CPU cores. Also, number of interrupts are increased and the channel numbers are reordered. Signed-off-by:
-
Iyappan Subramanian authored
BugLink: https://launchpad.net/bugs/1632739 Since hardware doesn't allow sharing of interrupts, this patch fixes the same by removing IRQF_SHARED flag. Signed-off-by:
-
Iyappan Subramanian authored
BugLink: https://launchpad.net/bugs/1632739 This patch fixes the crash observed during IPv4 forward test by setting the drop field in the dbptr. Signed-off-by:
-
Matthias Brugger authored
BugLink: https://launchpad.net/bugs/1632739 When probe bails out with an error, we try to unregister the netdev before we have even registered it. Fix the goto statements for that. Signed-off-by:
Matthias Brugger <mbrugger@suse.com> Signed-off-by:
-
Julia Lawall authored
BugLink: https://launchpad.net/bugs/1632739 The xgene_cle_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
-
Iyappan Subramanian authored
BugLink: https://launchpad.net/bugs/1632739 This patch gets ethernet to CPU channel (prefetch buffer number) from the newly added 'channel' property, thus decoupling Linux driver from resource management. Signed-off-by:
-
Sergei Shtylyov authored
BugLink: https://launchpad.net/bugs/1632739 Now that get_phy_device() no longer returns NULL on error, we don't need to check for it... Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Saurabh Sengar authored
BugLink: https://launchpad.net/bugs/1632739 this patch does the following: 1 . remove unnecessary if, else condition 2 . reduce one variable 3 . change the return type of 2 functions to void as there return values turn out to be 0 always after above changes Signed-off-by:
Saurabh Sengar <saurabh.truth@gmail.com> Signed-off-by:
-
Raanan Avargil authored
BugLinks: http://bugs.launchpad.net/bugs/1632578 i219 (4) and i219 (5) are the next LOM generations that will be available on the next Intel platform (KabeLake). This patch provides the initial support for the devices. Signed-off-by:
Raanan Avargil <raanan.avargil@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> (cherry picked from commit 9cd34b3a) Signed-off-by:
Phidias Chiang <phidias.chiang@canonical.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com>
-
Luis Henriques authored
Ignore: yes Signed-off-by:Luis Henriques <luis.henriques@canonical.com>
-
- 26 Oct, 2016 3 commits
-
-
Kamal Mostafa authored
Signed-off-by:Kamal Mostafa <kamal@canonical.com>
-
Kamal Mostafa authored
BugLink: http://bugs.launchpad.net/bugs/1635721Signed-off-by:
Andy Whitcroft <apw@canonical.com> Acked-by:
Brad Figg <brad.figg@canonical.com>
-
Netanel Belgazal authored
BugLink: http://bugs.launchpad.net/bugs/1635721 This is a driver for the ENA family of networking devices. Signed-off-by:
Netanel Belgazal <netanel@annapurnalabs.com> Signed-off-by:
-
