- 14 Mar, 2019 40 commits
-
-
Hauke Mehrtens authored
BugLink: https://bugs.launchpad.net/bugs/1818815 [ Upstream commit 3b89ea9c ] The features attribute is of type u64 and stored in the native endianes on the system. The for_each_set_bit() macro takes a pointer to a 32 bit array and goes over the bits in this area. On little Endian systems this also works with an u64 as the most significant bit is on the highest address, but on big endian the words are swapped. When we expect bit 15 here we get bit 47 (15 + 32). This patch converts it more or less to its own for_each_set_bit() implementation which works on 64 bit integers directly. This is then completely in host endianness and should work like expected. Fixes: fd867d51 ("net/core: generic support for disabling netdev features down stack") Signed-off-by:
Hauke Mehrtens <hauke.mehrtens@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Wei Yongjun authored
BugLink: https://bugs.launchpad.net/bugs/1818815 [ Upstream commit 07bd14cc ] Add the missing unlock before return from function set_fan_div() in the error handling case. Fixes: c9c63915 ("hwmon: (lm80) fix a missing check of the status of SMBus read") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Paolo Abeni authored
BugLink: https://bugs.launchpad.net/bugs/1818815 [ Upstream commit 225d9464 ] In the unlikely event that the kmalloc call in vmci_transport_socket_init() fails, we end-up calling vmci_transport_destruct() with a NULL vmci_trans() and oopsing. This change addresses the above explicitly checking for zero vmci_trans() at destruction time. Reported-by:
Xiumei Mu <xmu@redhat.com> Fixes: d021c344 ("VSOCK: Introduce VM Sockets") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Reviewed-by:
Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
-
Zhiqiang Liu authored
BugLink: https://bugs.launchpad.net/bugs/1818815 [ Upstream commit e75913c9 ] Follow those steps: # ip addr add 2001:123::1/32 dev eth0 # ip addr add 2001:123:456::2/64 dev eth0 # ip addr del 2001:123::1/32 dev eth0 # ip addr del 2001:123:456::2/64 dev eth0 and then prefix route of 2001:123::1/32 will still exist. This is because ipv6_prefix_equal in check_cleanup_prefix_route func does not check whether two IPv6 addresses have the same prefix length. If the prefix of one address starts with another shorter address prefix, even though their prefix lengths are different, the return value of ipv6_prefix_equal is true. Here I add a check of whether two addresses have the same prefix to decide whether their prefixes are equal. Fixes: 5b84efec ("ipv6 addrconf: don't cleanup prefix route for IFA_F_NOPREFIXROUTE") Signed-off-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Reported-by:
Wenhao Zhang <zhangwenhao8@huawei.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1818813Signed-off-by:
-
Hauke Mehrtens authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit da360299 upstream. This fixes a compile problem of some user space applications by not including linux/libc-compat.h in uapi/if_ether.h. linux/libc-compat.h checks which "features" the header files, included from the libc, provide to make the Linux kernel uapi header files only provide no conflicting structures and enums. If a user application mixes kernel headers and libc headers it could happen that linux/libc-compat.h gets included too early where not all other libc headers are included yet. Then the linux/libc-compat.h would not prevent all the redefinitions and we run into compile problems. This patch removes the include of linux/libc-compat.h from uapi/if_ether.h to fix the recently introduced case, but not all as this is more or less impossible. It is no problem to do the check directly in the if_ether.h file and not in libc-compat.h as this does not need any fancy glibc header detection as glibc never provided struct ethhdr and should define __UAPI_DEF_ETHHDR by them self when they will provide this. The following test program did not compile correctly any more: #include <linux/if_ether.h> #include <netinet/in.h> #include <linux/in.h> int main(void) { return 0; } Fixes: 6926e041 ("uapi/if_ether.h: prevent redefinition of struct ethhdr") Reported-by:
Guillaume Nault <g.nault@alphalink.fr> Cc: <stable@vger.kernel.org> # 4.15 Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Christian Lamparter authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit a86caa9b upstream. Sven Eckelmann reported an issue with the current IPQ4019 pinctrl. Setting up any gpio-hog in the device-tree for his device would "kill the bootup completely": | [ 0.477838] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe | [ 0.499828] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferring probe | [ 1.298883] requesting hog GPIO enable USB2 power (chip 1000000.pinctrl, offset 58) failed, -517 | [ 1.299609] gpiochip_add_data: GPIOs 0..99 (1000000.pinctrl) failed to register | [ 1.308589] ipq4019-pinctrl 1000000.pinctrl: Failed register gpiochip | [ 1.316586] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe | [ 1.322415] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferri This was also verified on a RT-AC58U (IPQ4018) which would no longer boot, if a gpio-hog was specified. (Tried forcing the USB LED PIN (GPIO0) to high.). The problem is that Pinctrl+GPIO registration is currently peformed in the following order in pinctrl-msm.c: 1. pinctrl_register() 2. gpiochip_add() 3. gpiochip_add_pin_range() The actual error code -517 == -EPROBE_DEFER is coming from pinctrl_get_device_gpio_range(), which is called through: gpiochip_add of_gpiochip_add of_gpiochip_scan_gpios gpiod_hog gpiochip_request_own_desc __gpiod_request chip->request gpiochip_generic_request pinctrl_gpio_request pinctrl_get_device_gpio_range pinctrl_get_device_gpio_range() is unable to find any valid pin ranges, since nothing has been added to the pinctrldev_list yet. so the range can't be found, and the operation fails with -EPROBE_DEFER. This patch fixes the issue by adding the "gpio-ranges" property to the pinctrl device node of all upstream Qcom SoC. The pin ranges are then added by the gpio core. In order to remain compatible with older, existing DTs (and ACPI) a check for the "gpio-ranges" property has been added to msm_gpio_init(). This prevents the driver of adding the same entry to the pinctrldev_list twice. Reported-by:
Sven Eckelmann <sven.eckelmann@openmesh.com> Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019] Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
John Youn authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit cd4b1e34 upstream. This shouldn't be freed by the HCD as it is owned by the core and allocated with devm_kzalloc. Signed-off-by:
John Youn <johnyoun@synopsys.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 39fba783 upstream. We can use skb_cow_head() to properly deal with clones, especially the ones coming from TCP stack that allow their head being modified. This avoids a copy. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 6bc6895b upstream. We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: 4a476bd6 ("usbnet: New driver for QinHeng CH9200 devices") Signed-off-by:
-
James Hughes authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit e9156cd2 upstream. The driver was failing to check that the SKB wasn't cloned before adding checksum data. Replace existing handling to extend/copy the header buffer with skb_cow_head. Signed-off-by:
James Hughes <james.hughes@raspberrypi.org> Acked-by:
Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by:
-
Nikos Tsironis authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 4ae280b4 upstream. When provisioning a new data block for a virtual block, either because the block was previously unallocated or because we are breaking sharing, if the whole block of data is being overwritten the bio that triggered the provisioning is issued immediately, skipping copying or zeroing of the data block. When this bio completes the new mapping is inserted in to the pool's metadata by process_prepared_mapping(), where the bio completion is signaled to the upper layers. This completion is signaled without first committing the metadata. If the bio in question has the REQ_FUA flag set and the system crashes right after its completion and before the next metadata commit, then the write is lost despite the REQ_FUA flag requiring that I/O completion for this request must only be signaled after the data has been committed to non-volatile storage. Fix this by deferring the completion of overwrite bios, with the REQ_FUA flag set, until after the metadata has been committed. Cc: stable@vger.kernel.org Signed-off-by:
Nikos Tsironis <ntsironis@arrikto.com> Acked-by:
Joe Thornber <ejt@redhat.com> Acked-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Borislav Petkov authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 10970e1b upstream. dump_thread32() in aout_core_dump() does not clear the user32 structure allocated on the stack as the first thing on function entry. As a result, the dump.u_comm, dump.u_ar0 and dump.signal which get assigned before the clearing, get overwritten. Rename that function to fill_dump() to make it clear what it does and call it first thing. This was caught while staring at a patch by Derek Robson <robsonde@gmail.com>. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Derek Robson <robsonde@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Matz <matz@suse.de> Cc: x86@kernel.org Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20190202005512.3144-1-robsonde@gmail.comSigned-off-by:
-
Eric W. Biederman authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit cf43a757 upstream. In the middle of do_exit() there is there is a call "ptrace_event(PTRACE_EVENT_EXIT, code);" That call places the process in TACKED_TRACED aka "(TASK_WAKEKILL | __TASK_TRACED)" and waits for for the debugger to release the task or SIGKILL to be delivered. Skipping past dequeue_signal when we know a fatal signal has already been delivered resulted in SIGKILL remaining pending and TIF_SIGPENDING remaining set. This in turn caused the scheduler to not sleep in PTACE_EVENT_EXIT as it figured a fatal signal was pending. This also caused ptrace_freeze_traced in ptrace_check_attach to fail because it left a per thread SIGKILL pending which is what fatal_signal_pending tests for. This difference in signal state caused strace to report strace: Exit of unknown pid NNNNN ignored Therefore update the signal handling state like dequeue_signal would when removing a per thread SIGKILL, by removing SIGKILL from the per thread signal mask and clearing TIF_SIGPENDING. Acked-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Ivan Delalande <colona@arista.com> Cc: stable@vger.kernel.org Fixes: 35634ffa ("signal: Always notice exiting tasks") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Hedi Berriche authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit f331e766 upstream. Calls into UV firmware must be protected against concurrency, expose the efi_runtime_lock to the UV platform, and use it to serialise UV BIOS calls. Signed-off-by:
Hedi Berriche <hedi.berriche@hpe.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by:
Russ Anderson <rja@hpe.com> Reviewed-by:
Dimitri Sivanich <sivanich@hpe.com> Reviewed-by:
Mike Travis <mike.travis@hpe.com> Cc: Andy Shevchenko <andy@infradead.org> Cc: Bhupesh Sharma <bhsharma@redhat.com> Cc: Darren Hart <dvhart@infradead.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-efi <linux-efi@vger.kernel.org> Cc: platform-driver-x86@vger.kernel.org Cc: stable@vger.kernel.org # v4.9+ Cc: Steve Wahl <steve.wahl@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190213193413.25560-5-hedi.berriche@hpe.comSigned-off-by:
-
Andreas Ziegler authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 0722069a upstream. When printing multiple uprobe arguments as strings the output for the earlier arguments would also include all later string arguments. This is best explained in an example: Consider adding a uprobe to a function receiving two strings as parameters which is at offset 0xa0 in strlib.so and we want to print both parameters when the uprobe is hit (on x86_64): $ echo 'p:func /lib/strlib.so:0xa0 +0(%di):string +0(%si):string' > \ /sys/kernel/debug/tracing/uprobe_events When the function is called as func("foo", "bar") and we hit the probe, the trace file shows a line like the following: [...] func: (0x7f7e683706a0) arg1="foobar" arg2="bar" Note the extra "bar" printed as part of arg1. This behaviour stacks up for additional string arguments. The strings are stored in a dynamically growing part of the uprobe buffer by fetch_store_string() after copying them from userspace via strncpy_from_user(). The return value of strncpy_from_user() is then directly used as the required size for the string. However, this does not take the terminating null byte into account as the documentation for strncpy_from_user() cleary states that it "[...] returns the length of the string (not including the trailing NUL)" even though the null byte will be copied to the destination. Therefore, subsequent calls to fetch_store_string() will overwrite the terminating null byte of the most recently fetched string with the first character of the current string, leading to the "accumulation" of strings in earlier arguments in the output. Fix this by incrementing the return value of strncpy_from_user() by one if we did not hit the maximum buffer size. Link: http://lkml.kernel.org/r/20190116141629.5752-1-andreas.ziegler@fau.de Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 5baaa59e ("tracing/probes: Implement 'memory' fetch method for uprobes") Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Andreas Ziegler <andreas.ziegler@fau.de> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Meelis Roos authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit bfc91368 upstream. Eiger machine vector definition has nr_irqs 128, and working 2.6.26 boot shows SCSI getting IRQ-s 64 and 65. Current kernel boot fails because Symbios SCSI fails to request IRQ-s and does not find the disks. It has been broken at least since 3.18 - the earliest I could test with my gcc-5. The headers have moved around and possibly another order of defines has worked in the past - but since 128 seems to be correct and used, fix arch/alpha/include/asm/irq.h to have NR_IRQS=128 for Eiger. This fixes 4.19-rc7 boot on my Force Flexor A264 (Eiger subarch). Cc: stable@vger.kernel.org # v3.18+ Signed-off-by:
Meelis Roos <mroos@linux.ee> Signed-off-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
-
Sergei Trofimovich authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 491af60f upstream. Fix page fault handling code to fixup r16-r18 registers. Before the patch code had off-by-two registers bug. This bug caused overwriting of ps,pc,gp registers instead of fixing intended r16,r17,r18 (see `struct pt_regs`). More details: Initially Dmitry noticed a kernel bug as a failure on strace test suite. Test passes unmapped userspace pointer to io_submit: ```c #include <err.h> #include <unistd.h> #include <sys/mman.h> #include <asm/unistd.h> int main(void) { unsigned long ctx = 0; if (syscall(__NR_io_setup, 1, &ctx)) err(1, "io_setup"); const size_t page_size = sysconf(_SC_PAGESIZE); const size_t size = page_size * 2; void *ptr = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (MAP_FAILED == ptr) err(1, "mmap(%zu)", size); if (munmap(ptr, size)) err(1, "munmap"); syscall(__NR_io_submit, ctx, 1, ptr + page_size); syscall(__NR_io_destroy, ctx); return 0; } ``` Running this test causes kernel to crash when handling page fault: ``` Unable to handle kernel paging request at virtual address ffffffffffff9468 CPU 3 aio(26027): Oops 0 pc = [<fffffc00004eddf8>] ra = [<fffffc00004edd5c>] ps = 0000 Not tainted pc is at sys_io_submit+0x108/0x200 ra is at sys_io_submit+0x6c/0x200 v0 = fffffc00c58e6300 t0 = fffffffffffffff2 t1 = 000002000025e000 t2 = fffffc01f159fef8 t3 = fffffc0001009640 t4 = fffffc0000e0f6e0 t5 = 0000020001002e9e t6 = 4c41564e49452031 t7 = fffffc01f159c000 s0 = 0000000000000002 s1 = 000002000025e000 s2 = 0000000000000000 s3 = 0000000000000000 s4 = 0000000000000000 s5 = fffffffffffffff2 s6 = fffffc00c58e6300 a0 = fffffc00c58e6300 a1 = 0000000000000000 a2 = 000002000025e000 a3 = 00000200001ac260 a4 = 00000200001ac1e8 a5 = 0000000000000001 t8 = 0000000000000008 t9 = 000000011f8bce30 t10= 00000200001ac440 t11= 0000000000000000 pv = fffffc00006fd320 at = 0000000000000000 gp = 0000000000000000 sp = 00000000265fd174 Disabling lock debugging due to kernel taint Trace: [<fffffc0000311404>] entSys+0xa4/0xc0 ``` Here `gp` has invalid value. `gp is s overwritten by a fixup for the following page fault handler in `io_submit` syscall handler: ``` __se_sys_io_submit ... ldq a1,0(t1) bne t0,4280 <__se_sys_io_submit+0x180> ``` After a page fault `t0` should contain -EFALUT and `a1` is 0. Instead `gp` was overwritten in place of `a1`. This happens due to a off-by-two bug in `dpf_reg()` for `r16-r18` (aka `a0-a2`). I think the bug went unnoticed for a long time as `gp` is one of scratch registers. Any kernel function call would re-calculate `gp`. Dmitry tracked down the bug origin back to 2.1.32 kernel version where trap_a{0,1,2} fields were inserted into struct pt_regs. And even before that `dpf_reg()` contained off-by-one error. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: linux-alpha@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reported-and-reviewed-by:
"Dmitry V. Levin" <ldv@altlinux.org> Cc: stable@vger.kernel.org # v2.1.32+ Bug: https://bugs.gentoo.org/672040Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by:
-
Matti Kurkela authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit e8b22d0a upstream. Like Fujitsu CELSIUS H760, the H780 also has a three-button Elantech touchpad, but the driver needs to be told so to enable the middle touchpad button. The elantech_dmi_force_crc_enabled quirk was not necessary with the H780. Also document the fw_version and caps values detected for both H760 and H780 models. Signed-off-by:
Matti Kurkela <Matti.Kurkela@iki.fi> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Jonathan Bakker authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 90cc55f0 upstream. Otherwise we introduce a race condition where userspace can request input before we're ready leading to null pointer dereference such as input: bma150 as /devices/platform/i2c-gpio-2/i2c-5/5-0038/input/input3 Unable to handle kernel NULL pointer dereference at virtual address 00000018 pgd = (ptrval) [00000018] *pgd=55dac831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: bma150 input_polldev [last unloaded: bma150] CPU: 0 PID: 2870 Comm: accelerometer Not tainted 5.0.0-rc3-dirty #46 Hardware name: Samsung S5PC110/S5PV210-based board PC is at input_event+0x8/0x60 LR is at bma150_report_xyz+0x9c/0xe0 [bma150] pc : [<80450f70>] lr : [<7f0a614c>] psr: 800d0013 sp : a4c1fd78 ip : 00000081 fp : 00020000 r10: 00000000 r9 : a5e2944c r8 : a7455000 r7 : 00000016 r6 : 00000101 r5 : a7617940 r4 : 80909048 r3 : fffffff2 r2 : 00000000 r1 : 00000003 r0 : 00000000 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 54e34019 DAC: 00000051 Process accelerometer (pid: 2870, stack limit = 0x(ptrval)) Stackck: (0xa4c1fd78 to 0xa4c20000) fd60: fffffff3 fc813f6c fd80: 40410581 d7530ce3 a5e2817c a7617f00 a5e29404 a5e2817c 00000000 7f008324 fda0: a5e28000 8044f59c a5fdd9d0 a5e2945c a46a4a00 a5e29668 a7455000 80454f10 fdc0: 80909048 a5e29668 a5fdd9d0 a46a4a00 806316d0 00000000 a46a4a00 801df5f0 fde0: 00000000 d7530ce3 a4c1fec0 a46a4a00 00000000 a5fdd9d0 a46a4a08 801df53c fe00: 00000000 801d74bc a4c1fec0 00000000 a4c1ff70 00000000 a7038da8 00000000 fe20: a46a4a00 801e91fc a411bbe0 801f2e88 00000004 00000000 80909048 00000041 fe40: 00000000 00020000 00000000 dead4ead a6a88da0 00000000 ffffe000 806fcae8 fe60: a4c1fec8 00000000 80909048 00000002 a5fdd9d0 a7660110 a411bab0 00000001 fe80: dead4ead ffffffff ffffffff a4c1fe8c a4c1fe8c d7530ce3 20000013 80909048 fea0: 80909048 a4c1ff70 00000001 fffff000 a4c1e000 00000005 00026038 801eabd8 fec0: a7660110 a411bab0 b9394901 00000006 a696201b 76fb3000 00000000 a7039720 fee0: a5fdd9d0 00000101 00000002 00000096 00000000 00000000 00000000 a4c1ff00 ff00: a6b310f4 805cb174 a6b310f4 00000010 00000fe0 00000010 a4c1e000 d7530ce3 ff20: 00000003 a5f41400 a5f41424 00000000 a6962000 00000000 00000003 00000002 ff40: ffffff9c 000a0000 80909048 d7530ce3 a6962000 00000003 80909048 ffffff9c ff60: a6962000 801d890c 00000000 00000000 00020000 a7590000 00000004 00000100 ff80: 00000001 d7530ce3 000288b8 00026320 000288b8 00000005 80101204 a4c1e000 ffa0: 00000005 80101000 000288b8 00026320 000288b8 000a0000 00000000 00000000 ffc0: 000288b8 00026320 000288b8 00000005 7eef3bac 000264e8 00028ad8 00026038 ffe0: 00000005 7eef3300 76f76e91 76f78546 800d0030 000288b8 00000000 00000000 [<80450f70>] (input_event) from [<a5e2817c>] (0xa5e2817c) Code: e1a08148 eaffffa8 e351001f 812fff1e (e590c018) ---[ end trace 1c691ee85f2ff243 ]--- Signed-off-by:
Jonathan Bakker <xc-racer2@live.ca> Signed-off-by:
Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Manuel Reinhardt authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 2bc16b9f upstream. The commit a60945fd ("ALSA: usb-audio: move implicit fb quirks to separate function") introduced an error in the handling of quirks for implicit feedback endpoints. This commit fixes this. If a quirk successfully sets up an implicit feedback endpoint, usb-audio no longer tries to find the implicit fb endpoint itself. Fixes: a60945fd ("ALSA: usb-audio: move implicit fb quirks to separate function") Signed-off-by:
Manuel Reinhardt <manuel.rhdt@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jurica Vukadin authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 4cd3016c upstream. This enables mute LED support and fixes switching jacks when the laptop is docked. Signed-off-by:
Jurica Vukadin <jurica.vukadin@rt-rk.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Ingo Molnar authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 528871b4 upstream. The following commit: 9dff0aa9 ("perf/core: Don't WARN() for impossible ring-buffer sizes") results in perf recording failures with larger mmap areas: root@skl:/tmp# perf record -g -a failed to mmap with 12 (Cannot allocate memory) The root cause is that the following condition is buggy: if (order_base_2(size) >= MAX_ORDER) goto fail; The problem is that @size is in bytes and MAX_ORDER is in pages, so the right test is: if (order_base_2(size) >= PAGE_SHIFT+MAX_ORDER) goto fail; Fix it. Reported-by:
"Jin, Yao" <yao.jin@linux.intel.com> Bisected-by:
Borislav Petkov <bp@alien8.de> Analyzed-by:
Peter Zijlstra <peterz@infradead.org> Cc: Julien Thierry <julien.thierry@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Fixes: 9dff0aa9 ("perf/core: Don't WARN() for impossible ring-buffer sizes") Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Mauro Ciancio authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 7ad222b3 upstream. This adds ELAN0617 to the ACPI table to support Elan touchpad found in Lenovo V330-15ISK. Signed-off-by:
Mauro Ciancio <mauro@acadeu.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Dmitry Torokhov authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit f420c54e upstream. This reverts commit 7db54c89 as it breaks Acer Aspire V-371 and other devices. According to Elan: "Acer Aspire F5-573G is MS Precision touchpad which should use hid multitouch driver. ELAN0501 should not be added in elan_i2c." Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202503 Cc: stable@vger.kernel.org Signed-off-by:
-
Mark Rustad authored
BugLink: https://bugs.launchpad.net/bugs/1818813 It seemed odd to say "since 4.17" in a 4.4 kernel. Consider rewording the reference to indicate where in the stable series it was introduced as well as where it originated. Signed-off-by:
Mark Rustad <mrustad@gmail.com> Signed-off-by:
-
Ross Lagerwall authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 92a8109e ] The code tries to allocate a contiguous buffer with a size supplied by the server (maxBuf). This could fail if memory is fragmented since it results in high order allocations for commonly used server implementations. It is also wasteful since there are probably few locks in the usual case. Limit the buffer to be no larger than a page to avoid memory allocation failures due to fragmentation. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Nicholas Mc Guire authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit df209c43 ] devm_kzalloc(), devm_kstrdup() and devm_kasprintf() all can fail internal allocation and return NULL. Using any of the assigned objects without checking is not safe. As this is early in the boot phase and these allocations really should not fail, any failure here is probably an indication of a more serious issue so it makes little sense to try and rollback the previous allocated resources or try to continue; but rather the probe function is simply exited with -ENOMEM. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Fixes: 684284b6 ("ARM: integrator: add MMCI device to IM-PD1") Signed-off-by:
-
Linus Walleij authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit b5f03484 ] These two lines are active high, not active low. The bug was found when we changed the kernel to respect the polarity defined in the device tree. Fixes: 1b90e06b ("ARM: kirkwood: Use devicetree to define DNS-32[05] fan") Cc: Jamie Lentin <jm@lentin.co.uk> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Julien D'Ascenzio <jdascenzio@posteo.net> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
Jamie Lentin <jm@lentin.co.uk> Reported-by:
Julien D'Ascenzio <jdascenzio@posteo.net> Tested-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by:
-
Peter Ujfalusi authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 7fca69d4 ] To avoid the following error: asoc-simple-card sound: ASoC: Failed to create card debugfs directory Which is because the card name contains '/' character, which can not be used in file or directory names. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Hauke Mehrtens authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 6926e041 upstream. Musl provides its own ethhdr struct definition. Add a guard to prevent its definition of the appropriate musl header has already been included. glibc does not implement this header, but when glibc will implement this they can just define __UAPI_DEF_ETHHDR 0 to make it work with the kernel. Signed-off-by:
-
Linus Torvalds authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit cb5b020a upstream. This reverts commit 8099b047. It turns out that people do actually depend on the shebang string being truncated, and on the fact that an interpreter (like perl) will often just re-interpret it entirely to get the full argument list. Reported-by:
Samuel Dionne-Riel <samuel@dionne-riel.com> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Sven Eckelmann authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 9114daa8 upstream. The caller of ndo_start_xmit may not already have called skb_reset_mac_header. The returned value of skb_mac_header/eth_hdr therefore can be in the wrong position and even outside the current skbuff. This for example happens when the user binds to the device using a PF_PACKET-SOCK_RAW with enabled qdisc-bypass: int opt = 4; setsockopt(sock, SOL_PACKET, PACKET_QDISC_BYPASS, &opt, sizeof(opt)); Since eth_hdr is used all over the codebase, the batadv_interface_tx function must always take care of resetting it. Fixes: c6c8fea2 ("net: Add batman-adv meshing protocol") Reported-by: syzbot+9d7405c7faa390e60b4e@syzkaller.appspotmail.com Reported-by: syzbot+7d20bc3f1ddddc0f9079@syzkaller.appspotmail.com Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Sven Eckelmann authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 955d3411 upstream. It is not allowed to use WARN* helpers on potential incorrect input from the user or transient problems because systems configured as panic_on_warn will reboot due to such a problem. A NULL return value of __dev_get_by_index can be caused by various problems which can either be related to the system configuration or problems (incorrectly returned network namespaces) in other (virtual) net_device drivers. batman-adv should not cause a (harmful) WARN in this situation and instead only report it via a simple message. Fixes: b7eddd0b ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface") Reported-by: syzbot+c764de0fcfadca9a8595@syzkaller.appspotmail.com Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Florian Westphal authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 35e61038 upstream. The check assumes that in transport mode, the first templates family must match the address family of the policy selector. Syzkaller managed to build a template using MODE_ROUTEOPTIMIZATION, with ipv4-in-ipv6 chain, leading to following splat: BUG: KASAN: stack-out-of-bounds in xfrm_state_find+0x1db/0x1854 Read of size 4 at addr ffff888063e57aa0 by task a.out/2050 xfrm_state_find+0x1db/0x1854 xfrm_tmpl_resolve+0x100/0x1d0 xfrm_resolve_and_create_bundle+0x108/0x1000 [..] Problem is that addresses point into flowi4 struct, but xfrm_state_find treats them as being ipv6 because it uses templ->encap_family is used (AF_INET6 in case of reproducer) rather than family (AF_INET). This patch inverts the logic: Enforce 'template family must match selector' EXCEPT for tunnel and BEET mode. In BEET and Tunnel mode, xfrm_tmpl_resolve_one will have remote/local address pointers changed to point at the addresses found in the template, rather than the flowi ones, so no oob read will occur. Reported-by: 3ntr0py1337@gmail.com Reported-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Ilya Dryomov authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 4aac9228 upstream. con_fault() can transition the connection into STANDBY right after ceph_con_keepalive() clears STANDBY in clear_standby(): libceph user thread ceph-msgr worker ceph_con_keepalive() mutex_lock(&con->mutex) clear_standby(con) mutex_unlock(&con->mutex) mutex_lock(&con->mutex) con_fault() ... if KEEPALIVE_PENDING isn't set set state to STANDBY ... mutex_unlock(&con->mutex) set KEEPALIVE_PENDING set WRITE_PENDING This triggers warnings in clear_standby() when either ceph_con_send() or ceph_con_keepalive() get to clearing STANDBY next time. I don't see a reason to condition queue_con() call on the previous value of KEEPALIVE_PENDING, so move the setting of KEEPALIVE_PENDING into the critical section -- unlike WRITE_PENDING, KEEPALIVE_PENDING could have been a non-atomic flag. Reported-by: syzbot+acdeb633f6211ccdf886@syzkaller.appspotmail.com Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Tested-by:
Myungho Jung <mhjungk@gmail.com> Signed-off-by:
-
Juerg Haefliger authored
BugLink: https://bugs.launchpad.net/bugs/1818813 This reverts commit 2fb90420. The commit ("cifs: In Kconfig CONFIG_CIFS_POSIX needs depends on legacy (insecure cifs)") that required 2fb90420 was reverted, so we need to revert 2fb90420 as well. Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1818813 This reverts commit 60da90b2 which is commit 6e785302 upstream. Yi writes: I notice that 4.4.169 merged 60da90b2 ("cifs: In Kconfig CONFIG_CIFS_POSIX needs depends on legacy (insecure cifs)") add a Kconfig dependency CIFS_ALLOW_INSECURE_LEGACY, which was not defined in 4.4 stable, so after this patch we are not able to enable CIFS_POSIX anymore. Linux 4.4 stable didn't merge the legacy dialects codes, so do we really need this patch for 4.4? So revert this patch. Reported-by:
"zhangyi (F)" <yi.zhang@huawei.com> Cc: Steve French <stfrench@microsoft.com> Cc: Pavel Shilovsky <pshilov@microsoft.com> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 2eee74b7 upstream. Directly including access_ok.h can result in the following compile errors if an architecture such as ia64 does not support direct unaligned accesses. include/linux/unaligned/access_ok.h:7:19: error: redefinition of 'get_unaligned_le16' include/linux/unaligned/le_struct.h:6:19: note: previous definition of 'get_unaligned_le16' was here include/linux/unaligned/access_ok.h:12:19: error: redefinition of 'get_unaligned_le32' include/linux/unaligned/le_struct.h:11:19: note: previous definition of 'get_unaligned_le32' was here Include asm/unaligned.h instead and let the architecture decide which access functions to use. Cc: Clément Perrochaud <clement.perrochaud@effinnov.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
Vladis Dronov authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 13054abb upstream. Ring buffer implementation in hid_debug_event() and hid_debug_events_read() is strange allowing lost or corrupted data. After commit 717adfda ("HID: debug: check length before copy_to_user()") it is possible to enter an infinite loop in hid_debug_events_read() by providing 0 as count, this locks up a system. Fix this by rewriting the ring buffer implementation with kfifo and simplify the code. This fixes CVE-2019-3819. v2: fix an execution logic and add a comment v3: use __set_current_state() instead of set_current_state() Backport to v4.4: some (tree-wide) patches are missing in v4.4 so cherry-pick relevant pieces from: * 6396bb22 ("treewide: kzalloc() -> kcalloc()") * a9a08845 ("vfs: do bulk POLL* -> EPOLL* replacement") * 92529623 ("HID: debug: improve hid_debug_event()") * 174cd4b1 ("sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>") Link: https://bugzilla.redhat.com/show_bug.cgi?id=1669187 Cc: stable@vger.kernel.org # v4.18+ Fixes: cd667ce2 ("HID: use debugfs for events/reports dumping") Fixes: 717adfda ("HID: debug: check length before copy_to_user()") Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
