- 13 Oct, 2021 2 commits
-
-
Uwe Kleine-König authored
Up to now tsc200x_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211012153945.2651412-7-u.kleine-koenig@pengutronix.deSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Uwe Kleine-König authored
Up to now adxl34x_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by:
-
- 12 Oct, 2021 2 commits
-
-
John Keeping authored
The device may take up to 100ms to become responsive during probe, so prefer asynchronous probing to avoid delaying the rest of the system. Suggested-by:
John Keeping <john@metanate.com> Link: https://lore.kernel.org/r/20211007111217.1935858-1-john@metanate.comSigned-off-by:
-
John Keeping authored
I have a ST1633 touch controller which fails to probe due to a timeout waiting for the controller to become ready. Increasing the minimum delay to 100ms ensures that the probe sequence completes successfully. The ST1633 datasheet says nothing about the maximum delay here and the ST1232 I2C protocol document says "wait until" with no notion of a timeout. Since this only runs once during probe, being generous with the timout seems reasonable and most likely the device will become ready eventually. (It may be worth noting that I saw this issue with a PREEMPT_RT patched kernel which probably has tighter wakeups from usleep_range() than other preemption models.) Fixes: f605be6a ("Input: st1232 - wait until device is ready before reading resolution") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210929152609.2421483-1-john@metanate.comSigned-off-by:
-
- 05 Oct, 2021 2 commits
-
-
Lukas Bulwahn authored
Commit 04647773 ("dt-bindings: input: Convert ChipOne ICN8318 binding to a schema") converts chipone_icn8318.txt to chipone,icn8318.yaml, but missed to adjust its reference in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Repair this file reference in CHIPONE ICN8318 I2C TOUCHSCREEN DRIVER. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20211005075451.29691-12-lukas.bulwahn@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Overlapping input and output arguments to snprintf() are undefined behavior in C99: drivers/input/joystick/analog.c: In function 'analog_name': drivers/input/joystick/analog.c:428:3: error: 'snprintf' argument 4 overlaps destination object 'analog' [-Werror=restrict] 428 | snprintf(analog->name, sizeof(analog->name), "%s %d-hat", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 429 | analog->name, hweight16(analog->mask & ANALOG_HATS_ALL)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/input/joystick/analog.c:420:40: note: destination object referenced by 'restrict'-qualified argument 1 was declared here 420 | static void analog_name(struct analog *analog) | ~~~~~~~~~~~~~~~^~~~~~ Change this function to use the simpler seq_buf interface instead. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210927101416.1569609-1-arnd@kernel.orgSigned-off-by:
-
- 02 Oct, 2021 1 commit
-
-
Mark Brown authored
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI device ID table. Fixes: 96c8395e ("spi: Revert modalias changes") Signed-off-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210927134104.38648-1-broonie@kernel.orgSigned-off-by:
-
- 23 Sep, 2021 3 commits
-
-
Cai Huoqing authored
The helper function devm_add_action_or_reset() will internally call devm_add_action(), and if devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210922125954.533-1-caihuoqing@baidu.comSigned-off-by:
-
Cai Huoqing authored
The helper function devm_add_action_or_reset() will internally call devm_add_action(), and if devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by:
-
Cai Huoqing authored
The helper function devm_add_action_or_reset() will internally call devm_add_action(), and if devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by:
-
- 21 Sep, 2021 8 commits
-
-
Hans de Goede authored
Some Goodix touchscreen controllers, such as for example the GT912, don't have flash-storage for their firmware. These models require the OS to load the firmware at runtime, as well as some other special handling. Add support for this to the goodix driver. This patch was developed and tested on a Glavey TM800A550L tablet. Note the "goodix,main-clk" and "firmware-name" device-properties used by the new code are *not* documented in the Documentation/devicetree/bindings/input/touchscreen/goodix.yaml device-tree bindings for now. Not documenting these is intentional. This is done because this code has only been tested on x86/ACPI so far, where devicetree is not used. Instead these properties are set through a software-fwnode attached to the device by the drivers/platform/x86/touchscreen_dmi.c code. This means that the use of this properties for now is purely a kernel-internal thing and the name/working of the properties may still be changed for now. Reviewed-by:
Bastien Nocera <hadess@hadess.net> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210920150643.155872-7-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
The config which needs to be send to the controller on some device-models is model-specific. Allow specifying a model-specific filename through a device-property, rather then always using a fixed filename. Note the "goodix,config-name" device-property used by this is *not* documented in the Documentation/devicetree/bindings/input/touchscreen/goodix.yaml device-tree bindings for now. Not documenting these is intentional. This is done because this code has only been tested on x86/ACPI so far, where devicetree is not used. Instead these properties are set through a software-fwnode attached to the device by the drivers/platform/x86/touchscreen_dmi.c code. This means that the use of this property for now is purely a kernel-internal thing and the name/working of the property may still be changed for now. Reviewed-by:
-
Hans de Goede authored
Make the goodix_i2c_read() and goodix_i2c_write*() helpers log errors themselves. This allows removing all the error logging from their callers. This already results in a nice cleanup with the current code and it also helps to make the upcoming support for controllers without flash cleaner. Reviewed-by:
-
Hans de Goede authored
Refactor reset handling a bit, change the main reset handler into a new goodix_reset_no_int_sync() helper and add a goodix_reset() wrapper which calls goodix_int_sync() separately. Also push the dev_err() call on reset failure into the goodix_reset_no_int_sync() and goodix_int_sync() functions, so that we don't need to have separate dev_err() calls in all their callers. This is a preparation patch for adding support for controllers without flash, which need to have their firmware uploaded and need some other special handling too. Reviewed-by:
-
Hans de Goede authored
Add a goodix.h header file, and move the register definitions, and struct declarations there and add prototypes for various helper functions. This is a preparation patch for adding support for controllers without flash, which need to have their firmware uploaded and need some other special handling too. Since MAINTAINERS needs updating because of this change anyways, also add myself as co-maintainer. Reviewed-by:
-
Hans de Goede authored
Change the type of the goodix_i2c_write() len parameter to from 'unsigned' to 'int' to avoid bare use of 'unsigned', changing it to 'int' makes goodix_i2c_write()' prototype consistent with goodix_i2c_read(). Reviewed-by:
-
Colin Ian King authored
There is a spelling mistake in the name of a joystick. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210920184748.18519-1-colin.king@canonical.comSigned-off-by:
-
Len Baker authored
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the struct_size() helper to do the arithmetic instead of the argument "size + count * size" in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-argumentsSigned-off-by:
Len Baker <len.baker@gmx.com> Link: https://lore.kernel.org/r/20210911112716.10067-1-len.baker@gmx.comSigned-off-by:
-
- 10 Sep, 2021 5 commits
-
-
Yassine Oudjana authored
Add a device tree binding for Cypress StreetFighter. Signed-off-by:
Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210907174341.422013-3-y.oudjana@protonmail.comSigned-off-by:
-
Yassine Oudjana authored
This adds support for Cypress StreetFighter touchkey controllers such as sf3155. This driver supports managing regulators and generating input events. Due to lack of documentation, this driver is entirely based on information gathered from a driver written for an old Android kernel fork[1][2]. [1] https://github.com/LineageOS/android_kernel_xiaomi_msm8996/blob/lineage-18.1/drivers/input/touchscreen/cyttsp_button.c [2] https://github.com/LineageOS/android_kernel_xiaomi_msm8996/blob/lineage-18.1/arch/arm/boot/dts/qcom/a4-msm8996-mtp.dtsi#L291-L314Signed-off-by:
-
Daniel Mack authored
This simplies the code a lot and fixes some potential resource leaks in the error return paths. Signed-off-by:
Daniel Mack <daniel@zonque.org> Link: https://lore.kernel.org/r/20210907200726.2034962-4-daniel@zonque.orgSigned-off-by:
-
Daniel Mack authored
The functions in the platform data struct to initialize, cleanup and apply custom filters are not in use by any mainline board. Remove support for them to pave the road for more cleanups to come. The enum was moved as it has no users outside of the driver code itself. Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20210907200726.2034962-3-daniel@zonque.orgSigned-off-by:
-
Daniel Mack authored
This will make the code a bit more terse. No functional change intended. Signed-off-by:
-
- 06 Sep, 2021 3 commits
-
-
Arvind Yadav authored
platform_get_irq() can fail here and we must check its return value. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
simba.hsu authored
Add support reading device ID when controller is in bootloader mode, which may happen if firmware update has been interrupted. Signed-off-by:
simba.hsu <simba.hsu@rad-ic.com> Link: https://lore.kernel.org/r/20210818063644.8654-1-simba.hsu@rad-ic.comSigned-off-by:
-
Tang Bin authored
The function cpcap_power_button_probe() does not perform sufficient error checking after executing platform_get_irq(), thus fix it. Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210802121740.8700-1-tangbin@cmss.chinamobile.comSigned-off-by:
-
- 04 Sep, 2021 3 commits
-
-
Geert Uytterhoeven authored
As the ADC ladder input driver does not have any code or data located in initmem, there is no need to annotate the adc_keys_driver structure with __refdata. Drop the annotation, to avoid suppressing future section warnings. Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/7091e8213602be64826fd689a7337246d218f3b1.1626255421.git.geert+renesas@glider.beSigned-off-by:
-
Colin Ian King authored
There is a spelling mistake in the Kconfig text. Fix it. Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in the Kconfig text. Fix it. Signed-off-by:
-
- 30 Aug, 2021 5 commits
-
-
Lukas Bulwahn authored
Commit f3a73284 ("ARM: remove sirf prima2/atlas platforms") removes the config ARCH_SIRF in ./arch/arm/mach-prima2/Kconfig. Hence, since then, the corresponding CSR Prima2 PWRC Driver is dead code. Remove this dead driver. Signed-off-by:
-
Linus Walleij authored
This keyboard driver is implementing a GPIO driver, so it need to include <linux/gpio/driver.h> and not the legacy <linux/gpio.h> header. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20210816232707.485031-1-linus.walleij@linaro.orgSigned-off-by:
-
Linus Walleij authored
This keyboard driver is implementing a GPIO driver, so it need to include <linux/gpio/driver.h> and not the legacy <linux/gpio.h> header. Signed-off-by:
-
Marek Vasut authored
Convert the TI TSC2004/TSC2005 DT bindings to YAML schema. Signed-off-by:
Marek Vasut <marex@denx.de> Reviewed-by:
-
Alexander Sverdlin authored
Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch to Common Clock Framework. Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20210613233041.128961-4-alexander.sverdlin@gmail.comSigned-off-by:
-
- 24 Jul, 2021 5 commits
-
-
Maxime Ripard authored
The LRADC can be a wakeup source and is listed as such in some DT already. Let's make sure we allow that property in the binding. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Reviewed-by:
-
Maxime Ripard authored
The Haptic feedback based on a regulator is supported by Linux thanks to its device tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Signed-off-by:
-
Maxime Ripard authored
The Pixcir Touchscreen Controller is supported by Linux thanks to its device tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Signed-off-by:
-
Maxime Ripard authored
The ChipOne ICN8318 Touchscreen Controller is supported by Linux thanks to its device tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Signed-off-by:
-
Dmitry Torokhov authored
There is absolutely no reason to use comma operator in this code, 2 separate statements make much more sense. Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/YPsa1qCBn/SAmE5x@google.comSigned-off-by:
-
- 23 Jul, 2021 1 commit
-
-
satya priya authored
Convert qcom PON binding from .txt to .yaml format. Signed-off-by:
satya priya <skakit@codeaurora.org> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by:
-
