- 27 Apr, 2021 28 commits
-
-
Lyude Paul authored
And finally, convert all of the code in drm_dp_mst_topology.c over to using drm_err() and drm_dbg*(). Note that this refactor would have been a lot more complicated to have tried writing a coccinelle script for, so this whole thing was done by hand. v2: * Fix line-wrapping in drm_dp_mst_atomic_check_mstb_bw_limit() Signed-off-by:
Lyude Paul <lyude@redhat.com> Cc: Robert Foss <robert.foss@linaro.org> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-18-lyude@redhat.comReviewed-by:
Dave Airlie <airlied@redhat.com>
-
Lyude Paul authored
Next step in the conversion, move everything in drm_dp_dual_mode_helper.c over to using drm_err() and drm_dbg_kms(). This was done using the following cocci script: @@ expression list expr; @@ ( - DRM_DEBUG_KMS(expr); + drm_dbg_kms(dev, expr); | - DRM_ERROR(expr); + drm_err(dev, expr); ) And correcting the indentation of the resulting code by hand. Signed-off-by:
-
Lyude Paul authored
Now that we've added a back-pointer to drm_device to drm_dp_aux, made drm_dp_aux available to any functions in drm_dp_helper.c which need to print to the kernel log, and ensured all of our logging uses a consistent format, let's do the final step of the conversion and actually move everything over to using drm_err() and drm_dbg_*(). This was done by using the following cocci script: @@ expression list expr; @@ ( - DRM_DEBUG_KMS(expr); + drm_dbg_kms(aux->drm_dev, expr); | - DRM_DEBUG_DP(expr); + drm_dbg_dp(aux->drm_dev, expr); | - DRM_DEBUG_ATOMIC(expr); + drm_dbg_atomic(aux->drm_dev, expr); | - DRM_DEBUG_KMS_RATELIMITED(expr); + drm_dbg_kms_ratelimited(aux->drm_dev, expr); | - DRM_ERROR(expr); + drm_err(aux->drm_dev, expr); ) Followed by correcting the resulting line-wrapping in the results by hand. v2: * Fix indenting in drm_dp_dump_access Signed-off-by:
-
Lyude Paul authored
While this shouldn't really be something that happens all that often, since we're going to be using the drm_dbg_* log helpers in DRM helpers it's technically possible that a driver could use an AUX adapter before it's been associated with it's respective drm_device. While drivers should take care to avoid this, there's likely going to be situations where it's difficult to workaround. And since other logging helpers in the kernel tend to be OK with NULL pointers (for instance, passing a NULL pointer to a "%s" argument for a printk-like function in the kernel doesn't break anything), we should do the same for ours. Signed-off-by:
-
Lyude Paul authored
Since this is one of the few functions in drm_dp_mst_topology.c that doesn't have any way of getting access to a drm_device, let's pass the drm_dp_mst_topology_mgr down to this function so that it can use drm_dbg_kms(). Signed-off-by:
-
Lyude Paul authored
So that we can start using drm_dbg_*() throughout the DRM DP helpers. Signed-off-by:
-
Lyude Paul authored
Another function to pass drm_device * down to so we can start using the drm_dbg_*() in the DRM DP helpers. Signed-off-by:
-
Lyude Paul authored
Another function we need to pass drm_device down to in order to start using drm_dbg_*(). Signed-off-by:
-
Lyude Paul authored
Another function that we'll need to pass a drm_device (and not drm_dp_aux) down to so that we can move over to using drm_dbg_*(). Signed-off-by:
-
Lyude Paul authored
Since we're about to be using drm_dbg_*() throughout the DP helpers, we'll need to be able to access the DRM device in the dual mode DP helpers as well. Note however that since drm_dp_dual_mode_detect() can be called with DDC adapters that aren't part of a drm_dp_aux struct, we need to pass down the drm_device to these functions instead of using drm_dp_aux. Signed-off-by:
-
Lyude Paul authored
Since we're about to convert everything in drm_dp_helper.c over to using drm_dbg_*(), let's also make our logging more consistent in drm_dp_helper.c while we're at it to ensure that we always print the name of the AUX channel in question. Signed-off-by:
-
Lyude Paul authored
So that we can start using drm_dbg_*() for drm_dp_link_train_channel_eq_delay() and drm_dp_lttpr_link_train_channel_eq_delay(). Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-7-lyude@redhat.comReviewed-by:
-
Lyude Paul authored
So that we can start using drm_dbg_*() in drm_dp_link_train_clock_recovery_delay(). Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-6-lyude@redhat.comReviewed-by:
-
Lyude Paul authored
The docs we had for drm_dp_aux_init() and drm_dp_aux_register() were mostly correct, except for the fact that they made the assumption that all AUX devices were grandchildren of their respective DRM devices. This is the case for most normal GPUs, but is almost never the case with SoCs and display bridges. So, let's fix this documentation to clarify when the right time to use drm_dp_aux_init() or drm_dp_aux_register() is. Signed-off-by:
-
Lyude Paul authored
This is something that we've wanted for a while now: the ability to actually look up the respective drm_device for a given drm_dp_aux struct. This will also allow us to transition over to using the drm_dbg_*() helpers for debug message printing, as we'll finally have a drm_device to reference for doing so. Note that there is one limitation with this - because some DP AUX adapters exist as platform devices which are initialized independently of their respective DRM devices, one cannot rely on drm_dp_aux->drm_dev to always be non-NULL until drm_dp_aux_register() has been called. We make sure to point this out in the documentation for struct drm_dp_aux. v3: * Add WARN_ON_ONCE() to drm_dp_aux_register() if drm_dev isn't filled out Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-4-lyude@redhat.comReviewed-by:
-
Lyude Paul authored
Since AUX adapters on nouveau have their respective DRM connectors as parents, we need to make sure that we register then after their connectors. Signed-off-by:
-
Lyude Paul authored
Just adds some missing calls to drm_dp_aux_register()/drm_dp_aux_unregister() for when we attach/detach the bridge. Signed-off-by:
-
Fabio M. De Francesco authored
drm_send_event_helper() has not prototype, it has internal linkage and therefore it should be defined with storage class 'static'. Signed-off-by:
Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210427105503.10765-1-fmdefrancesco@gmail.com
-
Takashi Iwai authored
On bochs DRM driver, the execution of "setterm --blank force" results in a frozen screen instead of a blank screen. It's due to the lack of the screen blanking support in its code. Actually, the QEMU bochs vga side can switch to the blanking mode when the bit 0x20 is cleared on VGA_ATT_IW register (0x3c0), which updates ar_index in QEMU side. So, essentially, we'd just need to clear the bit at pipe disable callback; that's what this patch does essentially. However, a tricky part is that the access via VGA_ATT_IW is done in "flip-flop"; the first write is for index and the second write is for the data like palette. Meanwhile, in the current bochs DRM driver, the flip-flop wasn't considered, and it calls only the register update once with the value 0x20. The spec and the actual VGA implementation in QEMU suggests that the flip flop flag is discarded by reading the CRTC index register (VGA_IS1_RC, 0x3da). So, in this patch, we add the helper to read a byte and the call to clear the flip flop flag before changing the blank / unblank setup via VGA_ATT_IW register. v1->v2: * discard ar_flip_flop by reading 0x3da, add bochs_vga_readb() * include video/vga.h for VGA register definitions * move the blank/unblank code to bochs_hw_blank() Signed-off-by:
Takashi Iwai <tiwai@suse.de> Acked-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210421080859.14869-1-tiwai@suse.de
-
KuoHsiang Chou authored
[Bug][DP501] If ASPEED P2A (PCI to AHB) bridge is disabled and disallowed for CVE_2019_6260 item3, and then the monitor's EDID is unable read through Parade DP501. The reason is the DP501's FW is mapped to BMC addressing space rather than Host addressing space. The resolution is that using "pci_iomap_range()" maps to DP501's FW that stored on the end of FB (Frame Buffer). In this case, FrameBuffer reserves the last 2MB used for the image of DP501. Signed-off-by:
KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Andy Shevchenko authored
The GPIO request can fail and probe may be deferred. Thus, the error message may be printed again and again. Avoid this by replacing DRM_DEV_ERROR() by dev_err_probe(). Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210421163157.50949-7-andriy.shevchenko@linux.intel.com
-
Andy Shevchenko authored
The GPIO request can fail and probe may be deferred. Thus, the error message may be printed again and again. Avoid this by replacing DRM_DEV_ERROR() by dev_err_probe(). Signed-off-by:
-
Andy Shevchenko authored
The GPIO request can fail and probe may be deferred. Thus, the error message may be printed again and again. Avoid this by replacing DRM_DEV_ERROR() by dev_err_probe(). Signed-off-by:
-
Andy Shevchenko authored
The GPIO request can fail and probe may be deferred. Thus, the error message may be printed again and again. Avoid this by replacing DRM_DEV_ERROR() by dev_err_probe(). Signed-off-by:
-
Andy Shevchenko authored
The GPIO request can fail and probe may be deferred. Thus, the error message may be printed again and again. Avoid this by replacing DRM_DEV_ERROR() by dev_err_probe(). Signed-off-by:
-
Andy Shevchenko authored
The GPIO request can fail and probe may be deferred. Thus, the error message may be printed again and again. Avoid this by replacing DRM_DEV_ERROR() by dev_err_probe(). Signed-off-by:
-
Andy Shevchenko authored
The GPIO request can fail and probe may be deferred. Thus, the error message may be printed again and again. Avoid this by replacing DRM_DEV_ERROR() by dev_err_probe(). Signed-off-by:
-
Bernard Zhao authored
Fix coccicheck warning: drivers/gpu/drm/gud/gud_internal.h:89:2-3: Unneeded semicolon drivers/gpu/drm/gud/gud_internal.h:107:2-3: Unneeded semicolon Signed-off-by:
Bernard Zhao <bernard@vivo.com> Signed-off-by:
-
- 26 Apr, 2021 8 commits
-
-
Takashi Iwai authored
The commit 7cbb93d8 ("drm/ast: Use managed pci functions") converted a few PCI accessors to the managed API and dropped the manual pci_iounmap() calls, but it seems to have forgotten converting pci_iomap() to the managed one. It resulted in the leftover resources after the driver unbind. Let's fix them. Fixes: 7cbb93d8 ("drm/ast: Use managed pci functions") Signed-off-by:
-
Joseph Kogut authored
The drm_pci_alloc/free abstraction of the dma-api is no longer required, remove it. Signed-off-by:
Joseph Kogut <joseph.kogut@gmail.com> Signed-off-by:
-
Joseph Kogut authored
Remove usage of legacy dma-api abstraction in preparation for removal Signed-off-by:
-
Maxime Ripard authored
Christian needs some patches from drm/next Signed-off-by:Maxime Ripard <maxime@cerno.tech>
-
Thomas Zimmermann authored
It's only used by DRM_FBDEV_EMULATION, so inline it there. Signed-off-by:
-
Thomas Zimmermann authored
Selecting DRM_FBDEV_EMULATION will include the correct settings for fbdev emulation. Drivers should not override this. Signed-off-by:
-
Thomas Zimmermann authored
Selecting DRM_FBDEV_EMULATION will include the correct settings for fbdev emulation. Drivers should not override this. Signed-off-by:
Stefan Agner <stefan@agner.ch> Acked-by:
-
Thomas Zimmermann authored
Respect DRM's kconfig setting for fbdev console emulation. If enabled, it will select all required config options. So remove them from vmwgfx's Kconfig file. Signed-off-by:
Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210415110040.23525-2-tzimmermann@suse.de
-
- 23 Apr, 2021 4 commits
-
-
Christian König authored
The alignment is a constant property and shouldn't change. v2: move documentation as well as suggested by Matthew. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210413135248.1266-4-christian.koenig@amd.com
-
Christian König authored
No functional changes, just removing the leftovers from the redesign. Signed-off-by:
-
Christian König authored
vmwgfx is the only driver actually using this. Move the handling into the driver instead. Signed-off-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
-
Shiwu Zhang authored
In case that all pre-allocated BOs are busy, just continue to populate BOs since likely half of system memory in total is still free. v4 (chk): fix code moved to VMWGFX as well Signed-off-by:
Shiwu Zhang <shiwu.zhang@amd.com> Reviewed-by:
-
