- 02 Dec, 2020 2 commits
-
-
Yanan Wang authored
When dirty logging is enabled, we collapse block entries into tables as necessary. If dirty logging gets canceled, we can end-up merging tables back into block entries. When this happens, we must not only free the non-huge page-table pages but also invalidate all the TLB entries that can potentially cover the block. Otherwise, we end-up with multiple possible translations for the same physical page, which can legitimately result in a TLB conflict. To address this, replease the bogus invalidation by IPA with a full VM invalidation. Although this is pretty heavy handed, it happens very infrequently and saves a bunch of invalidations by IPA. Signed-off-by:
Yanan Wang <wangyanan55@huawei.com> [maz: fixup commit message] Signed-off-by:
Marc Zyngier <maz@kernel.org> Acked-by:
Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201201201034.116760-3-wangyanan55@huawei.com
-
Yanan Wang authored
When installing a new leaf PTE onto an invalid ptep, we need to get_page(ptep) to account for the new mapping. However, simply updating a valid PTE shouldn't result in any additional refcounting, as there is new mapping. This otherwise results in a page being forever wasted. Address this by fixing-up the refcount in stage2_map_walker_try_leaf() if the PTE was already valid, balancing out the later get_page() in stage2_map_walk_leaf(). Signed-off-by:
-
- 17 Nov, 2020 1 commit
-
-
Zenghui Yu authored
It was recently reported that if GICR_TYPER is accessed before the RD base address is set, we'll suffer from the unset @rdreg dereferencing. Oops... gpa_t last_rdist_typer = rdreg->base + GICR_TYPER + (rdreg->free_index - 1) * KVM_VGIC_V3_REDIST_SIZE; It's "expected" that users will access registers in the redistributor if the RD has been properly configured (e.g., the RD base address is set). But it hasn't yet been covered by the existing documentation. Per discussion on the list [1], the reporting of the GICR_TYPER.Last bit for userspace never actually worked. And it's difficult for us to emulate it correctly given that userspace has the flexibility to access it any time. Let's just drop the reporting of the Last bit for userspace for now (userspace should have full knowledge about it anyway) and it at least prevents kernel from panic ;-) [1] https://lore.kernel.org/kvmarm/c20865a267e44d1e2c0d52ce4e012263@kernel.org/ Fixes: ba7b3f12 ("KVM: arm/arm64: Revisit Redistributor TYPER last bit computation") Reported-by:
Keqian Zhu <zhukeqian1@huawei.com> Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20201117151629.1738-1-yuzenghui@huawei.com Cc: stable@vger.kernel.org
-
- 16 Nov, 2020 1 commit
-
-
Jamie Iles authored
The nVHE percpu data is partially linked but the nVHE linker script did not align the percpu section. The PERCPU_INPUT macro would then align the data to a page boundary: #define PERCPU_INPUT(cacheline) \ __per_cpu_start = .; \ *(.data..percpu..first) \ . = ALIGN(PAGE_SIZE); \ *(.data..percpu..page_aligned) \ . = ALIGN(cacheline); \ *(.data..percpu..read_mostly) \ . = ALIGN(cacheline); \ *(.data..percpu) \ *(.data..percpu..shared_aligned) \ PERCPU_DECRYPTED_SECTION \ __per_cpu_end = .; but then when the final vmlinux linking happens the hypervisor percpu data is included after page alignment and so the offsets potentially don't match. On my build I saw that the .hyp.data..percpu section was at address 0x20 and then the percpu data would begin at 0x1000 (because of the page alignment in PERCPU_INPUT), but when linked into vmlinux, everything would be shifted down by 0x20 bytes. This manifests as one of the CPUs getting lost when running kvm-unit-tests or starting any VM and subsequent soft lockup on a Cortex A72 device. Fixes: 30c95391 ("kvm: arm64: Set up hyp percpu data for nVHE") Signed-off-by:
Jamie Iles <jamie@nuviainc.com> Signed-off-by:
David Brazdil <dbrazdil@google.com> Cc: David Brazdil <dbrazdil@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201113150406.14314-1-jamie@nuviainc.com
-
- 12 Nov, 2020 4 commits
-
-
Marc Zyngier authored
As the kernel never sets HCR_EL2.EnSCXT, accesses to SCXTNUM_ELx will trap to EL2. Let's handle that as gracefully as possible by injecting an UNDEF exception into the guest. This is consistent with the guest's view of ID_AA64PFR0_EL1.CSV2 being at most 1. Signed-off-by:
-
Marc Zyngier authored
A large number of system register trap handlers only inject an UNDEF exeption, and yet each class of sysreg seems to provide its own, identical function. Let's unify them all, saving us introducing yet another one later. Signed-off-by:
-
Marc Zyngier authored
We now expose ID_AA64PFR0_EL1.CSV2=1 to guests running on hosts that are immune to Spectre-v2, but that don't have this field set, most likely because they predate the specification. However, this prevents the migration of guests that have started on a host the doesn't fake this CSV2 setting to one that does, as KVM rejects the write to ID_AA64PFR0_EL2 on the grounds that it isn't what is already there. In order to fix this, allow userspace to set this field as long as this doesn't result in a promising more than what is already there (setting CSV2 to 0 is acceptable, but setting it to 1 when it is already set to 0 isn't). Fixes: e1026237 ("KVM: arm64: Set CSV2 for guests on hardware unaffected by Spectre-v2") Reported-by:
Peng Liang <liangpeng10@huawei.com> Signed-off-by:
-
Marc Zyngier authored
Linux 5.10-rc1 Signed-off-by:
-
- 06 Nov, 2020 5 commits
-
-
Andrew Jones authored
The AA64ZFR0_EL1 accessors are just the general accessors with its visibility function open-coded. It also skips the if-else chain in read_id_reg, but there's no reason not to go there. Indeed consolidating ID register accessors and removing lines of code make it worthwhile. Remove the AA64ZFR0_EL1 accessors, replacing them with the general accessors for sanitized ID registers. No functional change intended. Signed-off-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
-
Andrew Jones authored
The instruction encodings of ID registers are preallocated. Until an encoding is assigned a purpose the register is RAZ. KVM's general ID register accessor functions already support both paths, RAZ or not. If for each ID register we can determine if it's RAZ or not, then all ID registers can build on the general functions. The register visibility function allows us to check whether a register should be completely hidden or not, extending it to also report when the register should be RAZ or not allows us to use it for ID registers as well. Check for RAZ visibility in the ID register accessor functions, allowing the RAZ case to be handled in a generic way for all system registers. The new REG_RAZ flag will be used in a later patch. This patch has no intended functional change. Signed-off-by:
-
Andrew Jones authored
REG_HIDDEN_GUEST and REG_HIDDEN_USER are always used together. Consolidate them into a single REG_HIDDEN flag. We can always add another flag later if some register needs to expose itself differently to the guest than it does to userspace. No functional change intended. Signed-off-by:
-
Andrew Jones authored
ID registers are RAZ until they've been allocated a purpose, but that doesn't mean they should be removed from the KVM_GET_REG_LIST list. So far we only have one register, SYS_ID_AA64ZFR0_EL1, that is hidden from userspace when its function, SVE, is not present. Expose SYS_ID_AA64ZFR0_EL1 to userspace as RAZ when SVE is not implemented. Removing the userspace visibility checks is enough to reexpose it, as it will already return zero to userspace when SVE is not present. The register already behaves as RAZ for the guest when SVE is not present. Fixes: 73433762 ("KVM: arm64/sve: System register context switch and access support") Reported-by:
张东旭 <xu910121@sina.com> Signed-off-by:
-
Gavin Shan authored
The PUD and PMD are folded into PGD when the following options are enabled. In that case, PUD_SHIFT is equal to PMD_SHIFT and we fail to build with the indicated errors: CONFIG_ARM64_VA_BITS_42=y CONFIG_ARM64_PAGE_SHIFT=16 CONFIG_PGTABLE_LEVELS=3 arch/arm64/kvm/mmu.c: In function ‘user_mem_abort’: arch/arm64/kvm/mmu.c:798:2: error: duplicate case value case PMD_SHIFT: ^~~~ arch/arm64/kvm/mmu.c:791:2: note: previously used here case PUD_SHIFT: ^~~~ This fixes the issue by skipping the check on PUD huge page when PUD and PMD are folded into PGD. Fixes: 2f40c460 ("KVM: arm64: Use fallback mapping sizes for contiguous huge page sizes") Reported-by:Gavin Shan <gshan@redhat.com> Signed-off-by:
-
- 30 Oct, 2020 4 commits
-
-
Qais Yousef authored
On a system without uniform support for AArch32 at EL0, it is possible for the guest to force run AArch32 at EL0 and potentially cause an illegal exception if running on a core without AArch32. Add an extra check so that if we catch the guest doing that, then we prevent it from running again by resetting vcpu->arch.target and return ARM_EXCEPTION_IL. We try to catch this misbehaviour as early as possible and not rely on an illegal exception occuring to signal the problem. Attempting to run a 32bit app in the guest will produce an error from QEMU if the guest exits while running in AArch32 EL0. Tested on Juno by instrumenting the host to fake asym aarch32 and instrumenting KVM to make the asymmetry visible to the guest. [will: Incorporated feedback from Marc] Signed-off-by:
Qais Yousef <qais.yousef@arm.com> Signed-off-by:
-
Mark Rutland authored
We finalize caps before initializing kvm hyp code, and any use of cpus_have_const_cap() in kvm hyp code generates redundant and potentially unsound code to read the cpu_hwcaps array. A number of helper functions used in both hyp context and regular kernel context use cpus_have_const_cap(), as some regular kernel code runs before the capabilities are finalized. It's tedious and error-prone to write separate copies of these for hyp and non-hyp code. So that we can avoid the redundant code, let's automatically upgrade cpus_have_const_cap() to cpus_have_final_cap() when used in hyp context. With this change, there's never a reason to access to cpu_hwcaps array from hyp code, and we don't need to create an NVHE alias for this. This should have no effect on non-hyp code. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Mark Rutland authored
In a subsequent patch we'll modify cpus_have_const_cap() to call cpus_have_final_cap(), and hence we need to define cpus_have_final_cap() first. To make subsequent changes easier to follow, this patch reorders the two without making any other changes. There should be no functional change as a result of this patch. Signed-off-by:
-
Mark Rutland authored
Currently has_vhe() detects whether it is being compiled for VHE/NVHE hyp code based on preprocessor definitions, and uses this knowledge to avoid redundant runtime checks. There are other cases where we'd like to use this knowledge, so let's factor the preprocessor checks out into separate helpers. There should be no functional change as a result of this patch. Signed-off-by:
-
- 29 Oct, 2020 8 commits
-
-
Santosh Shukla authored
VFIO allows a device driver to resolve a fault by mapping a MMIO range. This can be subsequently result in user_mem_abort() to try and compute a huge mapping based on the MMIO pfn, which is a sure recipe for things to go wrong. Instead, force a PTE mapping when the pfn faulted in has a device mapping. Fixes: 6d674e28 ("KVM: arm/arm64: Properly handle faulting of device mappings") Suggested-by:
Santosh Shukla <sashukla@nvidia.com> [maz: rewritten commit message] Signed-off-by:
-
Gavin Shan authored
Although huge pages can be created out of multiple contiguous PMDs or PTEs, the corresponding sizes are not supported at Stage-2 yet. Instead of failing the mapping, fall back to the nearer supported mapping size (CONT_PMD to PMD and CONT_PTE to PTE respectively). Suggested-by:
-
Will Deacon authored
stage2_pte_cacheable() tries to figure out whether the mapping installed in its 'pte' parameter is cacheable or not. Unfortunately, it fails miserably because it extracts the memory attributes from the entry using FIELD_GET(), which returns the attributes shifted down to bit 0, but then compares this with the unshifted value generated by the PAGE_S2_MEMATTR() macro. A direct consequence of this bug is that cache maintenance is silently skipped, which in turn causes 32-bit guests to crash early on when their set/way maintenance is trapped but not emulated correctly. Fix the broken masks by avoiding the use of FIELD_GET() altogether. Fixes: 6d9d2115 ("KVM: arm64: Add support for stage-2 map()/unmap() in generic page-table") Reported-by:
-
Marc Zyngier authored
The DBGD{CCINT,SCRext} and DBGVCR register entries in the cp14 array are missing their target register, resulting in all accesses being targetted at the guard sysreg (indexed by __INVALID_SYSREG__). Point the emulation code at the actual register entries. Fixes: bdfb4b38 ("arm64: KVM: add trap handlers for AArch32 debug registers") Signed-off-by: -
Will Deacon authored
For consistency with the rest of the stage-2 page-table page allocations (performing using a kvm_mmu_memory_cache), ensure that __GFP_ACCOUNT is included in the GFP flags for the PGD pages. Signed-off-by:
-
Marc Zyngier authored
Setting PSTATE.PAN when entering EL2 on nVHE doesn't make much sense as this bit only means something for translation regimes that include EL0. This obviously isn't the case in the nVHE case, so let's drop this setting. Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Link: https://lore.kernel.org/r/20201026095116.72051-4-maz@kernel.org
-
Marc Zyngier authored
The new calling convention says that pointers coming from the SMCCC interface are turned into their HYP version in the host HVC handler. However, there is still a stray kern_hyp_va() in the TLB invalidation code, which could result in a corrupted pointer. Drop the spurious conversion. Fixes: a071261d ("KVM: arm64: nVHE: Fix pointers during SMCCC convertion") Signed-off-by:
-
Marc Zyngier authored
The hyp-init code starts by stashing a register in TPIDR_EL2 in in order to free a register. This happens no matter if the HVC call is legal or not. Although nothing wrong seems to come out of it, it feels odd to alter the EL2 state for something that eventually returns an error. Instead, use the fact that we know exactly which bits of the __kvm_hyp_init call are non-zero to perform the check with a series of EOR/ROR instructions, combined with a build-time check that the value is the one we expect. Signed-off-by:
-
- 25 Oct, 2020 15 commits
-
-
Linus Torvalds authored
-
Joe Perches authored
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.plSigned-off-by:Joe Perches <joe@perches.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by:
Miguel Ojeda <ojeda@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rasmus Villemoes authored
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in fact a "pointer to (pointer to int in userspace) in userspace". So sparse rightfully complains about passing a kernel pointer to put_user(). Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Eric Biggers authored
Commit 453431a5 ("mm, treewide: rename kzfree() to kfree_sensitive()") renamed kzfree() to kfree_sensitive(), but it left a compatibility definition of kzfree() to avoid being too disruptive. Since then a few more instances of kzfree() have slipped in. Just get rid of them and remove the compatibility definition once and for all. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Joe Perches authored
If set, use the environment variable GIT_DIR to change the default .git location of the kernel git tree. If GIT_DIR is unset, keep using the current ".git" default. Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.comSigned-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A time namespace fix and a matching selftest. The futex absolute timeouts which are based on CLOCK_MONOTONIC require time namespace corrected. This was missed in the original time namesapce support" * tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/timens: Add a test for futex() futex: Adjust absolute futex timeouts with per time namespace offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "Two scheduler fixes: - A trivial build fix for sched_feat() to compile correctly with CONFIG_JUMP_LABEL=n - Replace a zero lenght array with a flexible array" * tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/features: Fix !CONFIG_JUMP_LABEL case sched: Replace zero-length array with flexible-array -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Thomas Gleixner: "A single fix to compute the field offset of the SNOOPX bit in the data source bitmask of perf events correctly" * tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: correct SNOOPX field offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fix from Thomas Gleixner: "Just a trivial fix for kernel-doc warnings" * tag 'locking-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/seqlocks: Fix kernel-doc warnings
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB fixes from Jon Mason. * tag 'ntb-5.10' of git://github.com/jonmason/ntb: NTB: Use struct_size() helper in devm_kzalloc() ntb: intel: Fix memleak in intel_ntb_pci_probe NTB: hw: amd: fix an issue about leak system resources
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fix from Wolfram Sang: "Regression fix for rc1 and stable kernels as well" * 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more cifs updates from Steve French: "Add support for stat of various special file types (WSL reparse points for char, block, fifo)" * tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number smb3: add some missing definitions from MS-FSCC smb3: remove two unused variables smb3: add support for stat of WSL reparse points for special file types
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull more parisc updates from Helge Deller: - During this merge window O_NONBLOCK was changed to become 000200000, but we missed that the syscalls timerfd_create(), signalfd4(), eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict bit-wise check of the flags parameter. To provide backward compatibility with existing userspace we introduce parisc specific wrappers for those syscalls which filter out the old O_NONBLOCK value and replaces it with the new one. - Prevent HIL bus driver to get stuck when keyboard or mouse isn't attached - Improve error return codes when setting rtc time - Minor documentation fix in pata_ns87415.c * 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: ata: pata_ns87415.c: Document support on parisc with superio chip parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage hil/parisc: Disable HIL driver when it gets stuck parisc: Improve error return codes when setting rtc time
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull more xen updates from Juergen Gross: - a series for the Xen pv block drivers adding module parameters for better control of resource usge - a cleanup series for the Xen event driver * tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Documentation: add xen.fifo_events kernel parameter description xen/events: unmask a fifo event channel only if it was masked xen/events: only register debug interrupt for 2-level events xen/events: make struct irq_info private to events_base.c xen: remove no longer used functions xen-blkfront: Apply changed parameter name to the document xen-blkfront: add a parameter for disabling of persistent grants xen-blkback: add a parameter for disabling of persistent grants
-
git://github.com/micah-morton/linuxLinus Torvalds authored
Pull SafeSetID updates from Micah Morton: "The changes are mostly contained to within the SafeSetID LSM, with the exception of a few 1-line changes to change some ns_capable() calls to ns_capable_setid() -- causing a flag (CAP_OPT_INSETID) to be set that is examined by SafeSetID code and nothing else in the kernel. The changes to SafeSetID internally allow for setting up GID transition security policies, as already existed for UIDs" * tag 'safesetid-5.10' of git://github.com/micah-morton/linux: LSM: SafeSetID: Fix warnings reported by test bot LSM: SafeSetID: Add GID security policy handling LSM: Signal to SafeSetID when setting group IDs
-
