Dan writes:
  "libnvdimm/dax 4.19-rc8

   * Fix a livelock in dax_layout_busy_page() present since v4.18. The
     lockup triggers when truncating an actively mapped huge page out of
     a mapping pinned for direct-I/O.

   * Fix mprotect() clobbers of _PAGE_DEVMAP. Broken since v4.5
     mprotect() clears this flag that is needed to communicate the
     liveness of device pages to the get_user_pages() path."

* tag 'libnvdimm-fixes-4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  mm: Preserve _PAGE_DEVMAP across mprotect() calls
  filesystem-dax: Fix dax_layout_busy_page() livelock

Wolfram writes:
  "i2c fix for 4.19:

   I2C has one documentation bugfix for something we changed during the
   v4.19 cycle"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: Fix kerneldoc for renamed i2c dma put function

Paolo writes:
  "KVM fixes for 4.19-rc8

   Leftover bugfixes."

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: vmx: hyper-v: don't pass EPT configuration info to vmx_hv_remote_flush_tlb()
  KVM: x86: support CONFIG_KVM_AMD=y with CONFIG_CRYPTO_DEV_CCP_DD=m
  ARM: KVM: Correctly order SGI register entries in the cp15 array

I'm observing random crashes in multi-vCPU L2 guests running on KVM on
Hyper-V. I bisected the issue to the commit 877ad952 ("KVM: vmx: Add
tlb_remote_flush callback support"). Hyper-V TLFS states:

"AddressSpace specifies an address space ID (an EPT PML4 table pointer)"

So apparently, Hyper-V doesn't expect us to pass naked EPTP, only PML4
pointer should be used. Strip off EPT configuration information before
calling into vmx_hv_remote_flush_tlb().

Fixes: 877ad952 ("KVM: vmx: Add tlb_remote_flush callback support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

ubifs_assert() is not WARN_ON(), so we have to invert
the checks.
Randy faced this warning with UBIFS being a module, since
most users use UBIFS as builtin because UBIFS is the rootfs
nobody noticed so far. :-(
Including me.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 54169ddd ("ubifs: Turn two ubifs_assert() into a WARN_ON()")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes from Andrew:

* akpm:
  fs/fat/fatent.c: add cond_resched() to fat_count_free_clusters()
  mm/thp: fix call to mmu_notifier in set_pmd_migration_entry() v2
  mm/mmap.c: don't clobber partially overlapping VMA with MAP_FIXED_NOREPLACE
  ocfs2: fix a GCC warning

On non-preempt kernels this loop can take a long time (more than 50 ticks)
processing through entries.

Link: http://lkml.kernel.org/r/20181010172623.57033-1-khazhy@google.comSigned-off-by: Khazhismel Kumykov <khazhy@google.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Inside set_pmd_migration_entry() we are holding page table locks and thus
we can not sleep so we can not call invalidate_range_start/end()

So remove call to mmu_notifier_invalidate_range_start/end() because they
are call inside the function calling set_pmd_migration_entry() (see
try_to_unmap_one()).

Link: http://lkml.kernel.org/r/20181012181056.7864-1-jglisse@redhat.comSigned-off-by: Jérôme Glisse <jglisse@redhat.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Daniel Micay reports that attempting to use MAP_FIXED_NOREPLACE in an
application causes that application to randomly crash.  The existing check
for handling MAP_FIXED_NOREPLACE looks up the first VMA that either
overlaps or follows the requested region, and then bails out if that VMA
overlaps *the start* of the requested region.  It does not bail out if the
VMA only overlaps another part of the requested region.

Fix it by checking that the found VMA only starts at or after the end of
the requested region, in which case there is no overlap.

Test case:

user@debian:~$ cat mmap_fixed_simple.c
#include <sys/mman.h>
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>

#ifndef MAP_FIXED_NOREPLACE
#define MAP_FIXED_NOREPLACE 0x100000
#endif

int main(void) {
  char *p;

  errno = 0;
  p = mmap((void*)0x10001000, 0x4000, PROT_NONE,
MAP_PRIVATE|MAP_ANONYMOUS|MAP_FIXED_NOREPLACE, -1, 0);
  printf("p1=%p err=%m\n", p);

  errno = 0;
  p = mmap((void*)0x10000000, 0x2000, PROT_READ,
MAP_PRIVATE|MAP_ANONYMOUS|MAP_FIXED_NOREPLACE, -1, 0);
  printf("p2=%p err=%m\n", p);

  char cmd[100];
  sprintf(cmd, "cat /proc/%d/maps", getpid());
  system(cmd);

  return 0;
}
user@debian:~$ gcc -o mmap_fixed_simple mmap_fixed_simple.c
user@debian:~$ ./mmap_fixed_simple
p1=0x10001000 err=Success
p2=0x10000000 err=Success
10000000-10002000 r--p 00000000 00:00 0
10002000-10005000 ---p 00000000 00:00 0
564a9a06f000-564a9a070000 r-xp 00000000 fe:01 264004
  /home/user/mmap_fixed_simple
564a9a26f000-564a9a270000 r--p 00000000 fe:01 264004
  /home/user/mmap_fixed_simple
564a9a270000-564a9a271000 rw-p 00001000 fe:01 264004
  /home/user/mmap_fixed_simple
564a9a54a000-564a9a56b000 rw-p 00000000 00:00 0                          [heap]
7f8eba447000-7f8eba5dc000 r-xp 00000000 fe:01 405885
  /lib/x86_64-linux-gnu/libc-2.24.so
7f8eba5dc000-7f8eba7dc000 ---p 00195000 fe:01 405885
  /lib/x86_64-linux-gnu/libc-2.24.so
7f8eba7dc000-7f8eba7e0000 r--p 00195000 fe:01 405885
  /lib/x86_64-linux-gnu/libc-2.24.so
7f8eba7e0000-7f8eba7e2000 rw-p 00199000 fe:01 405885
  /lib/x86_64-linux-gnu/libc-2.24.so
7f8eba7e2000-7f8eba7e6000 rw-p 00000000 00:00 0
7f8eba7e6000-7f8eba809000 r-xp 00000000 fe:01 405876
  /lib/x86_64-linux-gnu/ld-2.24.so
7f8eba9e9000-7f8eba9eb000 rw-p 00000000 00:00 0
7f8ebaa06000-7f8ebaa09000 rw-p 00000000 00:00 0
7f8ebaa09000-7f8ebaa0a000 r--p 00023000 fe:01 405876
  /lib/x86_64-linux-gnu/ld-2.24.so
7f8ebaa0a000-7f8ebaa0b000 rw-p 00024000 fe:01 405876
  /lib/x86_64-linux-gnu/ld-2.24.so
7f8ebaa0b000-7f8ebaa0c000 rw-p 00000000 00:00 0
7ffcc99fa000-7ffcc9a1b000 rw-p 00000000 00:00 0                          [stack]
7ffcc9b44000-7ffcc9b47000 r--p 00000000 00:00 0                          [vvar]
7ffcc9b47000-7ffcc9b49000 r-xp 00000000 00:00 0                          [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0
  [vsyscall]
user@debian:~$ uname -a
Linux debian 4.19.0-rc6+ #181 SMP Wed Oct 3 23:43:42 CEST 2018 x86_64 GNU/Linux
user@debian:~$

As you can see, the first page of the mapping at 0x10001000 was clobbered.

Link: http://lkml.kernel.org/r/20181010152736.99475-1-jannh@google.com
Fixes: a4ff8e86 ("mm: introduce MAP_FIXED_NOREPLACE")
Signed-off-by: Jann Horn <jannh@google.com>
Reported-by: Daniel Micay <danielmicay@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following compile warning:

fs/ocfs2/dlmglue.c:99:30: warning: ‘lockdep_keys’ defined but not used [-Wunused-variable]
 static struct lock_class_key lockdep_keys[OCFS2_NUM_LOCK_TYPES];

Link: http://lkml.kernel.org/r/1536938148-32110-1-git-send-email-zhongjiang@huawei.comSigned-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Jens writes:
  "block fix for 4.19-rc

   Just a single fix that should go in, fixing a regression introduced
   in the blk-wbt code."

* tag 'for-linus-20181012' of git://git.kernel.dk/linux-block:
  blk-wbt: wake up all when we scale up, not down

Andreas writes:
  "gfs2 4.19 fixes

   Fix iomap buffered write support for journaled files"

* tag 'gfs2-4.19.fixes3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Fix iomap buffered write support for journaled files (2)

Will writes:
  "More arm64 fixes

   - Reject CHAIN PMU events when they are not part of a 64-bit counter

   - Fix WARN_ON_ONCE() that triggers for reserved regions that don't
     correspond to mapped memory"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: perf: Reject stand-alone CHAIN events for PMUv3
  arm64: Fix /proc/iomem for reserved but not memory regions

Arnd writes:
  "ARM: SoC fixes for 4.19

   Two last minute bugfixes, both for NXP platforms:

   * The Layerscape 'qbman' infrastructure suffers from probe ordering
     bugs in some configurations, a two-patch series adds a hotfix for
     this. 4.20 will have a longer set of patches to rework it.

   * The old imx53-qsb board regressed in 4.19 after the addition
     of cpufreq support, adding a set of explicit operating points
     fixes this."

* tag 'armsoc-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  soc: fsl: qman_portals: defer probe after qman's probe
  soc: fsl: qbman: add APIs to retrieve the probing status
  ARM: dts: imx53-qsb: disable 1.2GHz OPP

Fix a leak of afs_server structs.  The routine that installs them in the
various lookup lists and trees gets a ref on leaving the function, whether
it added the server or a server already exists.  It shouldn't increment
the refcount if it added the server.

The effect of this that "rmmod kafs" will hang waiting for the leaked
server to become unused.

Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Just drop the "linux" part of the path, it was never correct.
Reported-by: Joe Perches <joe@perches.com>
Fixes: 256ac037 ("dt-bindings: document devicetree bindings for mux-controllers and gpio-mux")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The file is GPL v2 or later.
Acked-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It turns out that the fix in commit 6636c3cc56 is bad; the assertion
that the iomap code no longer creates buffer heads is incorrect for
filesystems that set the IOMAP_F_BUFFER_HEAD flag.

Instead, what's happening is that gfs2_iomap_begin_write treats all
files that have the jdata flag set as journaled files, which is
incorrect as long as those files are inline ("stuffed").  We're handling
stuffed files directly via the page cache, which is why we ended up with
pages without buffer heads in gfs2_page_add_databufs.

Fix this by handling stuffed journaled files correctly in
gfs2_iomap_begin_write.

This reverts commit 6636c3cc5690c11631e6366cf9a28fb99c8b25bb.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

It doesn't make sense for a perf event to be configured as a CHAIN event
in isolation, so extend the arm_pmu structure with a ->filter_match()
function to allow the backend PMU implementation to reject CHAIN events
early.

Cc: <stable@vger.kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

We describe ranges of 'reserved' memory to userspace via /proc/iomem.
Commit 50d7ba36 ("arm64: export memblock_reserve()d regions via
/proc/iomem") updated the logic to export regions that were reserved
because their contents should be preserved. This allowed kexec-tools
to tell the difference between 'reserved' memory that must be
preserved and not overwritten, (e.g. the ACPI tables), and 'nomap'
memory that must not be touched without knowing the memory-attributes
(e.g. RAS CPER regions).

The above commit wrongly assumed that memblock_reserve() would not
be used to reserve regions that aren't memory. It turns out this is
exactly what early_init_dt_reserve_memory_arch() will do if it finds
a DT reserved-memory that was also carved out of the memory node, which
results in a WARN_ON_ONCE() and the region being reserved instead of
ignored. The ramoops description on hikey and dragonboard-410c both do
this, so we can't simply write this configuration off as "buggy firmware".

Avoid this issue by rewriting reserve_memblock_reserved_regions() so
that only the portions of reserved regions which overlap with mapped
memory are actually reserved.

Fixes: 50d7ba36 ("arm64: export memblock_reserve()d regions via /proc/iomem")
Reported-by: John Stultz <john.stultz@linaro.org>
Reported-by: Paolo Pisati <p.pisati@gmail.com>
CC: Akashi Takahiro <takahiro.akashi@linaro.org>
CC: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Access to the list of cells by /proc/net/afs/cells has a couple of
problems:

 (1) It should be checking against SEQ_START_TOKEN for the keying the
     header line.

 (2) It's only holding the RCU read lock, so it can't just walk over the
     list without following the proper RCU methods.

Fix these by using an hlist instead of an ordinary list and using the
appropriate accessor functions to follow it with RCU.

Since the code that adds a cell to the list must also necessarily change,
sort the list on insertion whilst we're at it.

Fixes: 989782dc ("afs: Overhaul cell database management")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Ulf writes:
   "MMC core:
    - Avoid fragile multiblock reads for the last sector in SPI mode
    WIFI/SDIO:
    - libertas: Fixup suspend sequence for the SDIO card"

* tag 'mmc-v4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  libertas: call into generic suspend code before turning off power
  mmc: block: avoid multiblock reads for the last sector in SPI mode

Linus writes:
  "GPIO fix for the v4.19 series:
   - Fix up the interrupt parent for the irqdomains."

* tag 'gpio-v4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: Assign gpio_irq_chip::parents to non-stack pointer

Linus writes:
  "pin control fix for v4.19:

   A single pin control fix for v4.19:
   - Interrupt setup in the MCP23S08 driver."

* tag 'pinctrl-v4.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: mcp23s08: fix irq and irqchip setup order

Boris writes:
  "mdt: fix for 4.19-rc8

   * Fix a stack overflow in lib/bch.c"

* tag 'mtd/fixes-for-4.19-rc8' of git://git.infradead.org/linux-mtd:
  lib/bch: fix possible stack overrun

Dave writes:
  "drm fixes for 4.19-rc8

   single nouveau runtime reference and mst change"

* tag 'drm-fixes-2018-10-12-1' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/drm/nouveau: Grab runtime PM ref in nv50_mstc_detect()

Doug writes:
  "RDMA fixes:

   Final for-rc pull request for 4.19

   We only have one bug to submit this time around.  It fixes a DMA
   unmap issue where we unmapped the DMA address from the IOMMU before
   we did from the card, resulting in a DMAR error with IOMMU enabled,
   or possible crash without."

* tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/mlx5: Unmap DMA addr from HCA before IOMMU

Dmitry writes:
  "Input updates for v4.19-rc7

   - we added a few scheduling points into various input interfaces to
     ensure that large writes will not cause RCU stalls
   - fixed configuring PS/2 keyboards as wakeup devices on newer
     platforms
   - added a new Xbox gamepad ID."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: uinput - add a schedule point in uinput_inject_events()
  Input: evdev - add a schedule point in evdev_write()
  Input: mousedev - add a schedule point in mousedev_write()
  Input: i8042 - enable keyboard wakeups by default when s2idle is used
  Input: xpad - add support for Xbox1 PDP Camo series gamepad

Stephen writes:
  "A couple of warning fixes:

  Two fixes from Peter Oberparleiter <oberpar@linux.ibm.com>:
    Commit 6b7dca40 ("tracing: Allow gcov profiling on only ftrace subsystem")
   uncovered linker problems when using gcov kernel profiling on some
   architectures. These problems were likely introduced earlier, and are
   possibly related to compiler changes."

* tag 'next-fixes-20181012' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes:
  vmlinux.lds.h: Fix linker warnings about orphan .LPBX sections
  vmlinux.lds.h: Fix incomplete .text.exit discards

The previous patch introduced very large kernel stack usage and a Makefile
change to hide the warning about it.

From what I can tell, a number of things went wrong here:

- The BCH_MAX_T constant was set to the maximum value for 'n',
  not the maximum for 't', which is much smaller.

- The stack usage is actually larger than the entire kernel stack
  on some architectures that can use 4KB stacks (m68k, sh, c6x), which
  leads to an immediate overrun.

- The justification in the patch description claimed that nothing
  changed, however that is not the case even without the two points above:
  the configuration is machine specific, and most boards  never use the
  maximum BCH_ECC_WORDS() length but instead have something much smaller.
  That maximum would only apply to machines that use both the maximum
  block size and the maximum ECC strength.

The largest value for 't' that I could find is '32', which in turn leads
to a 60 byte array instead of 2048 bytes. Making it '64' for future
extension seems also worthwhile, with 120 bytes for the array. Anything
larger won't fit into the OOB area on NAND flash.

With that changed, the warning can be enabled again.

Only linux-4.19+ contains the breakage, so this is only needed
as a stable backport if it does not make it into the release.

Fixes: 02361bc7 ("lib/bch: Remove VLA usage")
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>

David writes:
  "Networking

   1) RXRPC receive path fixes from David Howells.

   2) Re-export __skb_recv_udp(), from Jiri Kosina.

   3) Fix refcounting in u32 classificer, from Al Viro.

   4) Userspace netlink ABI fixes from Eugene Syromiatnikov.

   5) Don't double iounmap on rmmod in ena driver, from Arthur
      Kiyanovski.

   6) Fix devlink string attribute handling, we must pull a copy into a
      kernel buffer if the lifetime extends past the netlink request.
      From Moshe Shemesh.

   7) Fix hangs in RDS, from Ka-Cheong Poon.

   8) Fix recursive locking lockdep warnings in tipc, from Ying Xue.

   9) Clear RX irq correctly in socionext, from Ilias Apalodimas.

   10) bcm_sf2 fixes from Florian Fainelli."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
  net: dsa: bcm_sf2: Call setup during switch resume
  net: dsa: bcm_sf2: Fix unbind ordering
  net: phy: sfp: remove sfp_mutex's definition
  r8169: set RX_MULTI_EN bit in RxConfig for 8168F-family chips
  net: socionext: clear rx irq correctly
  net/mlx4_core: Fix warnings during boot on driverinit param set failures
  tipc: eliminate possible recursive locking detected by LOCKDEP
  selftests: udpgso_bench.sh explicitly requires bash
  selftests: rtnetlink.sh explicitly requires bash.
  qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interface
  tipc: queue socket protocol error messages into socket receive buffer
  tipc: set link tolerance correctly in broadcast link
  net: ipv4: don't let PMTU updates increase route MTU
  net: ipv4: update fnhe_pmtu when first hop's MTU changes
  net/ipv6: stop leaking percpu memory in fib6 info
  rds: RDS (tcp) hangs on sendto() to unresponding address
  net: make skb_partial_csum_set() more robust against overflows
  devlink: Add helper function for safely copy string param
  devlink: Fix param cmode driverinit for string type
  devlink: Fix param set handling for string type
  ...

Florian Fainelli says:

====================
net: dsa: bcm_sf2: Couple of fixes

Here are two fixes for the bcm_sf2 driver that were found during
testing unbind and analysing another issue during system
suspend/resume.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no reason to open code what the switch setup function does, in
fact, because we just issued a switch reset, we would make all the
register get their default values, including for instance, having unused
port be enabled again and wasting power and leading to an inappropriate
switch core clock being selected.

Fixes: 8cfa9498 ("net: dsa: bcm_sf2: add suspend/resume callbacks")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The order in which we release resources is unfortunately leading to bus
errors while dismantling the port. This is because we set
priv->wol_ports_mask to 0 to tell bcm_sf2_sw_suspend() that it is now
permissible to clock gate the switch. Later on, when dsa_slave_destroy()
comes in from dsa_unregister_switch() and calls
dsa_switch_ops::port_disable, we perform the same dismantling again, and
this time we hit registers that are clock gated.

Make sure that dsa_unregister_switch() is the first thing that happens,
which takes care of releasing all user visible resources, then proceed
with clock gating hardware. We still need to set priv->wol_ports_mask to
0 to make sure that an enabled port properly gets disabled in case it
was previously used as part of Wake-on-LAN.

Fixes: d9338023 ("net: dsa: bcm_sf2: Make it a real platform device driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enabling both CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y and
CONFIG_GCOV_PROFILE_ALL=y results in linker warnings:

  warning: orphan section `.data..LPBX1' being placed in
  section `.data..LPBX1'.

LD_DEAD_CODE_DATA_ELIMINATION adds compiler flag -fdata-sections. This
option causes GCC to create separate data sections for data objects,
including those generated by GCC internally for gcov profiling. The
names of these objects start with a dot (.LPBX0, .LPBX1), resulting in
section names starting with 'data..'.

As section names starting with 'data..' are used for specific purposes
in the Linux kernel, the linker script does not automatically include
them in the output data section, resulting in the "orphan section"
linker warnings.

Fix this by specifically including sections named "data..LPBX*" in the
data section.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

Enabling CONFIG_GCOV_PROFILE_ALL=y causes linker errors on ARM:

  `.text.exit' referenced in section `.ARM.exidx.text.exit':
  defined in discarded section `.text.exit'

  `.text.exit' referenced in section `.fini_array.00100':
  defined in discarded section `.text.exit'

And related errors on NDS32:

  `.text.exit' referenced in section `.dtors.65435':
  defined in discarded section `.text.exit'

The gcov compiler flags cause certain compiler versions to generate
additional destructor-related sections that are not yet handled by the
linker script, resulting in references between discarded and
non-discarded sections.

Since destructors are not used in the Linux kernel, fix this by
discarding these additional sections.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Greentime Hu <green.hu@gmail.com>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

This function was renamed in commit 82fe39a6 ("i2c: refactor
function to release a DMA safe buffer") but this kernel doc wasn't
updated to point at the new function. Rename it.

Fixes: 82fe39a6 ("i2c: refactor function to release a DMA safe buffer")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Tetsuo brought to my attention that I screwed up the scale_up/scale_down
helpers when I factored out the rq-qos code.  We need to wake up all the
waiters when we add slots for requests to make, not when we shrink the
slots.  Otherwise we'll end up things waiting forever.  This was a
mistake and simply puts everything back the way it was.

cc: stable@vger.kernel.org
Fixes: a7905043 ("blk-rq-qos: refactor out common elements of blk-wbt")
eported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The sfp_mutex variable is defined but never used in this file. Not even
in the commit that introduced that variable.

Remove sfp_mutex, it has no purpose.

Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

It has been reported that since
commit 05212ba8 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices")
at least RTL_GIGA_MAC_VER_38 NICs work erratically after a resume from
suspend.
The problem has been traced to a missing RX_MULTI_EN bit in the RxConfig
register.
We already set this bit for RTL_GIGA_MAC_VER_35 NICs of the same 8168F
chip family so let's do it also for its other siblings: RTL_GIGA_MAC_VER_36
and RTL_GIGA_MAC_VER_38.

Curiously, the NIC seems to work fine after a system boot without having
this bit set as long as the system isn't suspended and resumed.

Fixes: 05212ba8 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices")
Reported-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>