- 31 Jan, 2018 18 commits
-
-
Rafael J. Wysocki authored
commit c2a6bbaf upstream. The way acpi_find_child_device() works currently is that, if there are two (or more) devices with the same _ADR value in the same namespace scope (which is not specifically allowed by the spec and the OS behavior in that case is not defined), the first one of them found to be present (with the help of _STA) will be returned. This covers the majority of cases, but is not sufficient if some of the devices in question have a _HID (or _CID) returning some valid ACPI/PNP device IDs (which is disallowed by the spec) and the ASL writers' expectation appears to be that the OS will match devices without a valid ACPI/PNP device ID against a given bus address first. To cover this special case as well, modify find_child_checks() to prefer devices without ACPI/PNP device IDs over devices that have them. Suggested-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Slaby authored
commit 99989835 upstream. When LONG_MIN is passed to msgrcv, one would expect to recieve any message. But convert_mode does *msgtyp = -*msgtyp and -LONG_MIN is undefined. In particular, with my gcc -LONG_MIN produces -LONG_MIN again. So handle this case properly by assigning LONG_MAX to *msgtyp if LONG_MIN was specified as msgtyp to msgrcv. This code: long msg[] = { 100, 200 }; int m = msgget(IPC_PRIVATE, IPC_CREAT | 0644); msgsnd(m, &msg, sizeof(msg), 0); msgrcv(m, &msg, sizeof(msg), LONG_MIN, 0); produces currently nothing: msgget(IPC_PRIVATE, IPC_CREAT|0644) = 65538 msgsnd(65538, {100, "\310\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 16, 0) = 0 msgrcv(65538, ... Except a UBSAN warning: UBSAN: Undefined behaviour in ipc/msg.c:745:13 negation of -9223372036854775808 cannot be represented in type 'long int': With the patch, I see what I expect: msgget(IPC_PRIVATE, IPC_CREAT|0644) = 0 msgsnd(0, {100, "\310\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 16, 0) = 0 msgrcv(0, {100, "\310\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 16, -9223372036854775808, 0) = 16 Link: http://lkml.kernel.org/r/20161024082633.10148-1-jslaby@suse.czSigned-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vlastimil Babka authored
commit b050e376 upstream. Since commit 97a16fc8 ("mm, page_alloc: only enforce watermarks for order-0 allocations"), __zone_watermark_ok() check for high-order allocations will shortcut per-migratetype free list checks for ALLOC_HARDER allocations, and return true as long as there's free page of any migratetype. The intention is that ALLOC_HARDER can allocate from MIGRATE_HIGHATOMIC free lists, while normal allocations can't. However, as a side effect, the watermark check will then also return true when there are pages only on the MIGRATE_ISOLATE list, or (prior to CMA conversion to ZONE_MOVABLE) on the MIGRATE_CMA list. Since the allocation cannot actually obtain isolated pages, and might not be able to obtain CMA pages, this can result in a false positive. The condition should be rare and perhaps the outcome is not a fatal one. Still, it's better if the watermark check is correct. There also shouldn't be a performance tradeoff here. Link: http://lkml.kernel.org/r/20171102125001.23708-1-vbabka@suse.cz Fixes: 97a16fc8 ("mm, page_alloc: only enforce watermarks for order-0 allocations") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Rik van Riel <riel@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Doug Berger authored
commit e048cb32 upstream. The align_offset parameter is used by bitmap_find_next_zero_area_off() to represent the offset of map's base from the previous alignment boundary; the function ensures that the returned index, plus the align_offset, honors the specified align_mask. The logic introduced by commit b5be83e3 ("mm: cma: align to physical address, not CMA region position") has the cma driver calculate the offset to the *next* alignment boundary. In most cases, the base alignment is greater than that specified when making allocations, resulting in a zero offset whether we align up or down. In the example given with the commit, the base alignment (8MB) was half the requested alignment (16MB) so the math also happened to work since the offset is 8MB in both directions. However, when requesting allocations with an alignment greater than twice that of the base, the returned index would not be correctly aligned. Also, the align_order arguments of cma_bitmap_aligned_mask() and cma_bitmap_aligned_offset() should not be negative so the argument type was made unsigned. Fixes: b5be83e3 ("mm: cma: align to physical address, not CMA region position") Link: http://lkml.kernel.org/r/20170628170742.2895-1-opendmb@gmail.comSigned-off-by:
Angus Clark <angus@angusclark.org> Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Gregory Fong <gregory.0xf0@gmail.com> Cc: Doug Berger <opendmb@gmail.com> Cc: Angus Clark <angus@angusclark.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Shiraz Hashim <shashim@codeaurora.org> Cc: Jaewon Kim <jaewon31.kim@samsung.com> Signed-off-by:
-
Michal Hocko authored
commit 18365225 upstream. Laurent Dufour has noticed that hwpoinsoned pages are kept charged. In his particular case he has hit a bad_page("page still charged to cgroup") when onlining a hwpoison page. While this looks like something that shouldn't happen in the first place because onlining hwpages and returning them to the page allocator makes only little sense it shows a real problem. hwpoison pages do not get freed usually so we do not uncharge them (at least not since commit 0a31bc97 ("mm: memcontrol: rewrite uncharge API")). Each charge pins memcg (since e8ea14cc ("mm: memcontrol: take a css reference for each charged page")) as well and so the mem_cgroup and the associated state will never go away. Fix this leak by forcibly uncharging a LRU hwpoisoned page in delete_from_lru_cache(). We also have to tweak uncharge_list because it cannot rely on zero ref count for these pages. [akpm@linux-foundation.org: coding-style fixes] Fixes: 0a31bc97 ("mm: memcontrol: rewrite uncharge API") Link: http://lkml.kernel.org/r/20170502185507.GB19165@dhcp22.suse.czSigned-off-by:
Michal Hocko <mhocko@suse.com> Reported-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Tested-by:
Balbir Singh <bsingharora@gmail.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Michal Hocko authored
commit 561b5e07 upstream. Commit 1be7107f ("mm: larger stack guard gap, between vmas") has introduced a regression in some rust and Java environments which are trying to implement their own stack guard page. They are punching a new MAP_FIXED mapping inside the existing stack Vma. This will confuse expand_{downwards,upwards} into thinking that the stack expansion would in fact get us too close to an existing non-stack vma which is a correct behavior wrt safety. It is a real regression on the other hand. Let's work around the problem by considering PROT_NONE mapping as a part of the stack. This is a gros hack but overflowing to such a mapping would trap anyway an we only can hope that usespace knows what it is doing and handle it propely. Fixes: 1be7107f ("mm: larger stack guard gap, between vmas") Link: http://lkml.kernel.org/r/20170705182849.GA18027@dhcp22.suse.czSigned-off-by:
-
Sudeep Holla authored
commit 55877ef4 upstream. ARM64 enables both CONFIG_OF and CONFIG_ACPI and the firmware can pass both ACPI tables and the device tree. Based on the kernel parameter, one of the two will be chosen. If acpi is enabled, then device tree is not unflattened. Currently ARM64 platforms report: " Failed to find cpu0 device node Unable to detect cache hierarchy from DT for CPU 0 " which is incorrect when booting with ACPI. Also latest ACPI v6.1 has no support for cache properties/hierarchy. This patch adds check for unflattened device tree and also returns as "not supported" if ACPI is runtime enabled. It also removes the reference to DT from the error message as the cache hierarchy can be detected from the firmware(OF/DT/ACPI) Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Mian Yousaf Kaukab <yousaf.kaukab@suse.com> Signed-off-by:
-
Sudeep Holla authored
commit fac51482 upstream. With CONFIG_OF enabled on x86, we get the following error on boot: " Failed to find cpu0 device node Unable to detect cache hierarchy from DT for CPU 0 " and the cacheinfo fails to get populated in the corresponding sysfs entries. This is because cache_setup_of_node looks for of_node for setting up the shared cpu_map without checking that it's already populated in the architecture specific callback. In order to indicate that the shared cpu_map is already populated, this patch introduces a boolean `cpu_map_populated` in struct cpu_cacheinfo that can be used by the generic code to skip cache_shared_cpu_map_setup. This patch also sets that boolean for x86. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Janakarajan Natarajan authored
commit 88d879d2 upstream. Newer hardware has uncovered a bug in the software implementation of using MWAITX for the delay function. A value of 0 for the timer is meant to indicate that a timeout will not be used to exit MWAITX. On newer hardware this can result in MWAITX never returning, resulting in NMI soft lockup messages being printed. On older hardware, some of the other conditions under which MWAITX can exit masked this issue. The AMD APM does not currently document this and will be updated. Please refer to http://marc.info/?l=kvm&m=148950623231140 for information regarding NMI soft lockup messages on an AMD Ryzen 1800X. This has been root-caused as a 0 passed to MWAITX causing it to wait indefinitely. This change has the added benefit of avoiding the unnecessary setup of MONITORX/MWAITX when the delay value is zero. Signed-off-by:
Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Link: http://lkml.kernel.org/r/1493156643-29366-1-git-send-email-Janakarajan.Natarajan@amd.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
-
Punit Agrawal authored
commit c507babf upstream. KVM only supports PMD hugepages at stage 2 but doesn't actually check that the provided hugepage memory pagesize is PMD_SIZE before populating stage 2 entries. In cases where the backing hugepage size is smaller than PMD_SIZE (such as when using contiguous hugepages), KVM can end up creating stage 2 mappings that extend beyond the supplied memory. Fix this by checking for the pagesize of userspace vma before creating PMD hugepage at stage 2. Fixes: 66b3923a ("arm64: hugetlb: add support for PTE contiguous bit") Signed-off-by:
Punit Agrawal <punit.agrawal@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Marc Kleine-Budde authored
commit d4689846 upstream. If an invalid CANFD frame is received, from a driver or from a tun interface, a Kernel warning is generated. This patch replaces the WARN_ONCE by a simple pr_warn_once, so that a kernel, bootet with panic_on_warn, does not panic. A printk seems to be more appropriate here. Reported-by: syzbot+e3b775f40babeff6e68b@syzkaller.appspotmail.com Suggested-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Marc Kleine-Budde authored
commit 8cb68751 upstream. If an invalid CAN frame is received, from a driver or from a tun interface, a Kernel warning is generated. This patch replaces the WARN_ONCE by a simple pr_warn_once, so that a kernel, bootet with panic_on_warn, does not panic. A printk seems to be more appropriate here. Reported-by: syzbot+4386709c0c1284dca827@syzkaller.appspotmail.com Suggested-by:
-
Jonathan Dieter authored
commit e5dfa3f9 upstream. The usbip userspace tools call sprintf()/snprintf() and don't check for the return value which can lead the paths to overflow, truncating the final file in the path. More urgently, GCC 7 now warns that these aren't checked with -Wformat-overflow, and with -Werror enabled in configure.ac, that makes these tools unbuildable. This patch fixes these problems by replacing sprintf() with snprintf() in one place and adding checks for the return value of snprintf(). Reviewed-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
Jonathan Dieter <jdieter@lesbg.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Jonathan Dieter authored
commit cfd6ed45 upstream. GCC 7 now warns when switch statements fall through implicitly, and with -Werror enabled in configure.ac, that makes these tools unbuildable. We fix this by notifying the compiler that this particular case statement is meant to fall through. Reviewed-by:
-
Shuah Khan authored
commit 2f2d0088 upstream. When a client has a USB device attached over IP, the vhci_hcd driver is locally leaking a socket pointer address via the /sys/devices/platform/vhci_hcd/status file (world-readable) and in debug output when "usbip --debug port" is run. Fix it to not leak. The socket pointer address is not used at the moment and it was made visible as a convenient way to find IP address from socket pointer address by looking up /proc/net/{tcp,tcp6}. As this opens a security hole, the fix replaces socket pointer address with sockfd. Reported-by:
Secunia Research <vuln@secunia.com> Signed-off-by:
-
Martin Brandenburg authored
commit a0ec1ded upstream. In orangefs_devreq_read, there is a loop which picks an op off the list of pending ops. If the loop fails to find an op, there is nothing to read, and it returns EAGAIN. If the op has been given up on, the loop is restarted via a goto. The bug is that the variable which the found op is written to is not reinitialized, so if there are no more eligible ops on the list, the code runs again on the already handled op. This is triggered by interrupting a process while the op is being copied to the client-core. It's a fairly small window, but it's there. Signed-off-by:
Martin Brandenburg <martin@omnibond.com> Signed-off-by:
-
Martin Brandenburg authored
commit 0afc0dec upstream. set_op_state_purged can delete the op. Signed-off-by:
-
Andy Lutomirski authored
commit 1c52d859 upstream. We support various non-Intel CPUs that don't have the CPUID instruction, so the M486 test was wrong. For now, fix it with a big hammer: handle missing CPUID on all 32-bit CPUs. Reported-by:
One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Matthew Whitehead <tedheadster@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: xen-devel <Xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/685bd083a7c036f7769510b6846315b17d6ba71f.1481307769.git.luto@kernel.orgSigned-off-by:
-
- 23 Jan, 2018 22 commits
-
-
Greg Kroah-Hartman authored
-
Jonas Gorski authored
commit 0a5191ef upstream. Since commit aef9a7bd ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers"), the port's default FCR value isn't used in serial8250_do_set_termios anymore, but copied over once in serial8250_config_port and then modified as needed. Unfortunately, serial8250_config_port will never be called if the port is shared between kernel and userspace, and the port's flag doesn't have UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well. This causes garbled output from userspace: [ 5.220000] random: procd urandom read with 49 bits of entropy available ers [kee Fix this by forcing it to be configured on boot, resulting in the expected output: [ 5.250000] random: procd urandom read with 50 bits of entropy available Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level Fixes: aef9a7bd ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers") Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Nicolas Schichan <nschichan@freebox.fr> Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17544/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Signed-off-by:
-
Andi Kleen authored
commit 3f7d8755 upstream. The generated assembler for the C fill RSB inline asm operations has several issues: - The C code sets up the loop register, which is then immediately overwritten in __FILL_RETURN_BUFFER with the same value again. - The C code also passes in the iteration count in another register, which is not used at all. Remove these two unnecessary operations. Just rely on the single constant passed to the macro for the iterations. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Cc: dave.hansen@intel.com Cc: gregkh@linuxfoundation.org Cc: torvalds@linux-foundation.org Cc: arjan@linux.intel.com Link: https://lkml.kernel.org/r/20180117225328.15414-1-andi@firstfloor.orgSigned-off-by:
-
zhenwei.pi authored
commit 98f0fcee upstream. In section <2. Runtime Cost>, fix wrong index. Signed-off-by:
zhenwei.pi <zhenwei.pi@youruncloud.com> Signed-off-by:
-
Masami Hiramatsu authored
commit c86a32c0 upstream. Since indirect jump instructions will be replaced by jump to __x86_indirect_thunk_*, those jmp instruction must be treated as an indirect jump. Since optprobe prohibits to optimize probes in the function which uses an indirect jump, it also needs to find out the function which jump to __x86_indirect_thunk_* and disable optimization. Add a check that the jump target address is between the __indirect_thunk_start/end when optimizing kprobe. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
-
Masami Hiramatsu authored
commit c1804a23 upstream. Mark __x86_indirect_thunk_* functions as blacklist for kprobes because those functions can be called from anywhere in the kernel including blacklist functions of kprobes. Signed-off-by:
-
Masami Hiramatsu authored
commit 736e80a4 upstream. Introduce start/end markers of __x86_indirect_thunk_* functions. To make it easy, consolidate .text.__x86.indirect_thunk.* sections to one .text.__x86.indirect_thunk section and put it in the end of kernel text section and adds __indirect_thunk_start/end so that other subsystem (e.g. kprobes) can identify it. Signed-off-by:
-
Thomas Gleixner authored
commit 6f41c34d upstream. The machine check idtentry uses an indirect branch directly from the low level code. This evades the speculation protection. Replace it by a direct call into C code and issue the indirect call there so the compiler can apply the proper speculation protection. Signed-off-by:
Borislav Petkov <bp@alien8.de> Reviewed-by:
Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801181626290.1847@nanosSigned-off-by:
-
Shuah Khan authored
commit 918b8ac5 upstream. vhci_hcd calls sysfs_create_group() with dynamically allocated sysfs attributes triggering the lock-class key not persistent warning. Call sysfs_attr_init() for dynamically allocated sysfs attributes to fix it. vhci_hcd vhci_hcd: USB/IP Virtual Host Controller vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 2 BUG: key ffff88006a7e8d18 not in .data! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3131 lockdep_init_map+0x60c/0x770 DEBUG_LOCKS_WARN_ON(1)[ 1.567044] Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-rc7+ #58 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88006bce6eb8 ffffffff81f96c8a ffffffff00000a02 1ffff1000d79cd6a ffffed000d79cd62 000000046bce6ed8 0000000041b58ab3 ffffffff8598af40 ffffffff81f969f8 0000000000000000 0000000041b58ab3 0000000000000200 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96c8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff812b808f>] __warn+0x19f/0x1e0 kernel/panic.c:550 [<ffffffff812b8195>] warn_slowpath_fmt+0xc5/0x110 kernel/panic.c:565 [<ffffffff813f3efc>] lockdep_init_map+0x60c/0x770 kernel/locking/lockdep.c:3131 [<ffffffff819e43d4>] __kernfs_create_file+0x114/0x2a0 fs/kernfs/file.c:954 [<ffffffff819e68f5>] sysfs_add_file_mode_ns+0x225/0x520 fs/sysfs/file.c:305 [< inline >] create_files fs/sysfs/group.c:64 [<ffffffff819e8a89>] internal_create_group+0x239/0x8f0 fs/sysfs/group.c:134 [<ffffffff819e915f>] sysfs_create_group+0x1f/0x30 fs/sysfs/group.c:156 [<ffffffff8323de24>] vhci_start+0x5b4/0x7a0 drivers/usb/usbip/vhci_hcd.c:978 [<ffffffff82c907ca>] usb_add_hcd+0x8da/0x1c60 drivers/usb/core/hcd.c:2867 [<ffffffff8323bc57>] vhci_hcd_probe+0x97/0x130 drivers/usb/usbip/vhci_hcd.c:1103 --- --- ---[ end trace c33c7b202cf3aac8 ]--- Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Tom Lendacky authored
commit 694d99d4 upstream. AMD processors are not subject to the types of attacks that the kernel page table isolation feature protects against. The AMD microarchitecture does not allow memory references, including speculative references, that access higher privileged data when running in a lesser privileged mode when that access would result in a page fault. Disable page table isolation by default on AMD processors by not setting the X86_BUG_CPU_INSECURE feature, which controls whether X86_FEATURE_PTI is set. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20171227054354.20369.94587.stgit@tlendack-t1.amdoffice.net Cc: Nick Lowe <nick.lowe@gmail.com> Signed-off-by:
-
Marc Zyngier authored
commit acfb3b88 upstream. KVM doesn't follow the SMCCC when it comes to unimplemented calls, and inject an UNDEF instead of returning an error. Since firmware calls are now used for security mitigation, they are becoming more common, and the undef is counter productive. Instead, let's follow the SMCCC which states that -1 must be returned to the caller when getting an unknown function number. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Dennis Yang authored
commit 490ae017 upstream. For btree removal, there is a corner case that a single thread could takes 6 locks which is more than THIN_MAX_CONCURRENT_LOCKS(5) and leads to deadlock. A btree removal might eventually call rebalance_children()->rebalance3() to rebalance entries of three neighbor child nodes when shadow_spine has already acquired two write locks. In rebalance3(), it tries to shadow and acquire the write locks of all three child nodes. However, shadowing a child node requires acquiring a read lock of the original child node and a write lock of the new block. Although the read lock will be released after block shadowing, shadowing the third child node in rebalance3() could still take the sixth lock. (2 write locks for shadow_spine + 2 write locks for the first two child nodes's shadow + 1 write lock for the last child node's shadow + 1 read lock for the last child node) Signed-off-by:
Dennis Yang <dennisyang@qnap.com> Acked-by:
Joe Thornber <thornber@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit bc68d0a4 upstream. When inserting a new key/value pair into a btree we walk down the spine of btree nodes performing the following 2 operations: i) space for a new entry ii) adjusting the first key entry if the new key is lower than any in the node. If the _root_ node is full, the function btree_split_beneath() allocates 2 new nodes, and redistibutes the root nodes entries between them. The root node is left with 2 entries corresponding to the 2 new nodes. btree_split_beneath() then adjusts the spine to point to one of the two new children. This means the first key is never adjusted if the new key was lower, ie. operation (ii) gets missed out. This can result in the new key being 'lost' for a period; until another low valued key is inserted that will uncover it. This is a serious bug, and quite hard to make trigger in normal use. A reproducing test case ("thin create devices-in-reverse-order") is available as part of the thin-provision-tools project: https://github.com/jthornber/thin-provisioning-tools/blob/master/functional-tests/device-mapper/dm-tests.scm#L593 Fix the issue by changing btree_split_beneath() so it no longer adjusts the spine. Instead it unlocks both the new nodes, and lets the main loop in btree_insert_raw() relock the appropriate one and make any neccessary adjustments. Reported-by:
Monty Pavel <monty_pavel@sina.com> Signed-off-by:
-
Sergey Senozhatsky authored
commit 62635ea8 upstream. show_workqueue_state() can print out a lot of messages while being in atomic context, e.g. sysrq-t -> show_workqueue_state(). If the console device is slow it may end up triggering NMI hard lockup watchdog. Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Xinyu Lin authored
commit db5ff909 upstream. LITEON EP1 has the same timeout issues as CX1 series devices. Revert max_sectors to the value of 1024. Fixes: e0edc8c5 ("libata: apply MAX_SEC_1024 to all CX1-JB*-HP devices") Signed-off-by:
Xinyu Lin <xinyu0123@gmail.com> Signed-off-by:
-
Alexey Dobriyan authored
commit 8bb2ee19 upstream. do_task_stat() accesses IP and SP of a task without bumping reference count of a stack (which became an entity with independent lifetime at some point). Steps to reproduce: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <sys/time.h> #include <sys/resource.h> #include <unistd.h> #include <sys/wait.h> int main(void) { setrlimit(RLIMIT_CORE, &(struct rlimit){}); while (1) { char buf[64]; char buf2[4096]; pid_t pid; int fd; pid = fork(); if (pid == 0) { *(volatile int *)0 = 0; } snprintf(buf, sizeof(buf), "/proc/%u/stat", pid); fd = open(buf, O_RDONLY); read(fd, buf2, sizeof(buf2)); close(fd); waitpid(pid, NULL, 0); } return 0; } BUG: unable to handle kernel paging request at 0000000000003fd8 IP: do_task_stat+0x8b4/0xaf0 PGD 800000003d73e067 P4D 800000003d73e067 PUD 3d558067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 1417 Comm: a.out Not tainted 4.15.0-rc8-dirty #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc27 04/01/2014 RIP: 0010:do_task_stat+0x8b4/0xaf0 Call Trace: proc_single_show+0x43/0x70 seq_read+0xe6/0x3b0 __vfs_read+0x1e/0x120 vfs_read+0x84/0x110 SyS_read+0x3d/0xa0 entry_SYSCALL_64_fastpath+0x13/0x6c RIP: 0033:0x7f4d7928cba0 RSP: 002b:00007ffddb245158 EFLAGS: 00000246 Code: 03 b7 a0 01 00 00 4c 8b 4c 24 70 4c 8b 44 24 78 4c 89 74 24 18 e9 91 f9 ff ff f6 45 4d 02 0f 84 fd f7 ff ff 48 8b 45 40 48 89 ef <48> 8b 80 d8 3f 00 00 48 89 44 24 20 e8 9b 97 eb ff 48 89 44 24 RIP: do_task_stat+0x8b4/0xaf0 RSP: ffffc90000607cc8 CR2: 0000000000003fd8 John Ogness said: for my tests I added an else case to verify that the race is hit and correctly mitigated. Link: http://lkml.kernel.org/r/20180116175054.GA11513@avx2Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Reported-by:
"Kohli, Gaurav" <gkohli@codeaurora.org> Tested-by:
John Ogness <john.ogness@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Xi Kangjie authored
commit 883d50f5 upstream. Since kernel 4.9, the thread_info has been moved into task_struct, no longer locates at the bottom of kernel stack. See commits c65eacbe ("sched/core: Allow putting thread_info into task_struct") and 15f4eae7 ("x86: Move thread_info into task_struct"). Before fix: (gdb) set $current = $lx_current() (gdb) p $lx_thread_info($current) $1 = {flags = 1470918301} (gdb) p $current.thread_info $2 = {flags = 2147483648} After fix: (gdb) p $lx_thread_info($current) $1 = {flags = 2147483648} (gdb) p $current.thread_info $2 = {flags = 2147483648} Link: http://lkml.kernel.org/r/20180118210159.17223-1-imxikangjie@gmail.com Fixes: 15f4eae7 ("x86: Move thread_info into task_struct") Signed-off-by:
Xi Kangjie <imxikangjie@gmail.com> Acked-by:
Jan Kiszka <jan.kiszka@siemens.com> Acked-by:
Kieran Bingham <kbingham@kernel.org> Signed-off-by:
-
Stephane Grosjean authored
commit d8a243af upstream. In some rare conditions when running one PEAK USB-FD interface over a non high-speed USB controller, one useless USB fragment might be sent. This patch fixes the way a USB command is fragmented when its length is greater than 64 bytes and when the underlying USB controller is not a high-speed one. Signed-off-by:
Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by:
-
Thomas Petazzoni authored
commit 56aeb07c upstream. MPP7 is currently muxed as "gpio", but this function doesn't exist for MPP7, only "gpo" is available. This causes the following error: kirkwood-pinctrl f1010000.pin-controller: unsupported function gpio on pin mpp7 pinctrl core: failed to register map default (6): invalid type given kirkwood-pinctrl f1010000.pin-controller: error claiming hogs: -22 kirkwood-pinctrl f1010000.pin-controller: could not claim hogs: -22 kirkwood-pinctrl f1010000.pin-controller: unable to register pinctrl driver kirkwood-pinctrl: probe of f1010000.pin-controller failed with error -22 So the pinctrl driver is not probed, all device drivers (including the UART driver) do a -EPROBE_DEFER, and therefore the system doesn't really boot (well, it boots, but with no UART, and no devices that require pin-muxing). Back when the Device Tree file for this board was introduced, the definition was already wrong. The pinctrl driver also always described as "gpo" this function for MPP7. However, between Linux 4.10 and 4.11, a hog pin failing to be muxed was turned from a simple warning to a hard error that caused the entire pinctrl driver probe to bail out. This is probably the result of commit 61187142 ("pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()"). This commit fixes the Device Tree to use the proper "gpo" function for MPP7, which fixes the boot of OpenBlocks A7, which was broken since Linux 4.11. Fixes: f24b56cb ("ARM: kirkwood: add support for OpenBlocks A7 platform") Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Maxime Ripard authored
commit c13e7f31 upstream. The DRM driver most notably, but also out of tree drivers (for now) like the VPU or GPU drivers, are quite big consumers of large, contiguous memory buffers. However, the sunxi_defconfig doesn't enable CMA in order to mitigate that, which makes them almost unusable. Enable it to make sure it somewhat works. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
commit b7563e27 upstream. Stefan Wahren reports a problem with a warning fix that was merged for v4.15: we had lots of device nodes with a 'phys' property pointing to a device node that is not compliant with the binding documented in Documentation/devicetree/bindings/phy/phy-bindings.txt This generally works because USB HCD drivers that support both the generic phy subsystem and the older usb-phy subsystem ignore most errors from phy_get() and related calls and then use the usb-phy driver instead. However, it turns out that making the usb-nop-xceiv device compatible with the generic-phy binding changes the phy_get() return code from -EINVAL to -EPROBE_DEFER, and the dwc2 usb controller driver for bcm2835 now returns -EPROBE_DEFER from its probe function rather than ignoring the failure, breaking all USB support on raspberry-pi when CONFIG_GENERIC_PHY is enabled. The same code is used in the dwc3 driver and the usb_add_hcd() function, so a reasonable assumption would be that many other platforms are affected as well. I have reviewed all the related patches and concluded that "usb-nop-xceiv" is the only USB phy that is affected by the change, and since it is by far the most commonly referenced phy, all the other USB phy drivers appear to be used in ways that are are either safe in DT (they don't use the 'phys' property), or in the driver (they already ignore -EPROBE_DEFER from generic-phy when usb-phy is available). To work around the problem, this adds a special case to _of_phy_get() so we ignore any PHY node that is compatible with "usb-nop-xceiv", as we know that this can never load no matter how much we defer. In the future, we might implement a generic-phy driver for "usb-nop-xceiv" and then remove this workaround. Since we generally want older kernels to also want to work with the fixed devicetree files, it would be good to backport the patch into stable kernels as well (3.13+ are possibly affected), even though they don't contain any of the patches that may have caused regressions. Fixes: 014d6da6 ARM: dts: bcm283x: Fix DTC warnings about missing phy-cells Fixes: c5bbf358 arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv Fixes: 44e5dced arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv Fixes: f568f6f5 ARM: dts: omap: Add missing #phy-cells to usb-nop-xceiv Fixes: d745d5f2 ARM: dts: imx51-zii-rdu1: Add missing #phy-cells to usb-nop-xceiv Fixes: 915fbe59 ARM: dts: imx: Add missing #phy-cells to usb-nop-xceiv Link: https://marc.info/?l=linux-usb&m=151518314314753&w=2 Link: https://patchwork.kernel.org/patch/10158145/ Cc: Felipe Balbi <balbi@kernel.org> Cc: Eric Anholt <eric@anholt.net> Tested-by:
Stefan Wahren <stefan.wahren@i2se.com> Acked-by:
Rob Herring <robh@kernel.org> Tested-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 1ebe1eaf upstream. Since enums do not get converted by the TRACE_EVENT macro into their values, the event format displaces the enum name and not the value. This breaks tools like perf and trace-cmd that need to interpret the raw binary data. To solve this, an enum map was created to convert these enums into their actual numbers on boot up. This is done by TRACE_EVENTS() adding a TRACE_DEFINE_ENUM() macro. Some enums were not being converted. This was caused by an optization that had a bug in it. All calls get checked against this enum map to see if it should be converted or not, and it compares the call's system to the system that the enum map was created under. If they match, then they call is processed. To cut down on the number of iterations needed to find the maps with a matching system, since calls and maps are grouped by system, when a match is made, the index into the map array is saved, so that the next call, if it belongs to the same system as the previous call, could start right at that array index and not have to scan all the previous arrays. The problem was, the saved index was used as the variable to know if this is a call in a new system or not. If the index was zero, it was assumed that the call is in a new system and would keep incrementing the saved index until it found a matching system. The issue arises when the first matching system was at index zero. The next map, if it belonged to the same system, would then think it was the first match and increment the index to one. If the next call belong to the same system, it would begin its search of the maps off by one, and miss the first enum that should be converted. This left a single enum not converted properly. Also add a comment to describe exactly what that index was for. It took me a bit too long to figure out what I was thinking when debugging this issue. Link: http://lkml.kernel.org/r/717BE572-2070-4C1E-9902-9F2E0FEDA4F8@oracle.com Fixes: 0c564a53 ("tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values") Reported-by:
Chuck Lever <chuck.lever@oracle.com> Teste-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
