- 26 Aug, 2024 10 commits
-
-
Emmanuel Grumbach authored
There is a WARNING in iwl_trans_wait_tx_queues_empty() (that was recently converted from just a message), that can be hit if we wait for TX queues to become empty after firmware died. Clearly, we can't expect anything from the firmware after it's declared dead. Don't call iwl_trans_wait_tx_queues_empty() in this case. While it could be a good idea to stop the flow earlier, the flush functions do some maintenance work that is not related to the firmware, so keep that part of the code running even when the firmware is not running. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240825191257.a7cbd794cee9.I44a739fbd4ffcc46b83844dd1c7b2eb0c7b270f6@changeid [edit commit message] Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Avraham Stern authored
MLO internal scan may include 6 GHz channels. Since the 6 GHz scan indication is not set, the channel flags are set incorrectly, which leads to a firmware assert. Since the MLO scan may include 6 GHz and non 6 GHz channels in one request, add support for non-PSC 6 GHz channels (PSC channels are already supported) when the 6 GHz indication is not set. Fixes: 38b3998d ("wifi: iwlwifi: mvm: Introduce internal MLO passive scan") Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
Not doing so will make us send a host command to the transport while the firmware is not alive, which will trigger a WARNING. bad state = 0 WARNING: CPU: 2 PID: 17434 at drivers/net/wireless/intel/iwlwifi/iwl-trans.c:115 iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi] RIP: 0010:iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi] Call Trace: <TASK> iwl_mvm_send_cmd+0x40/0xc0 [iwlmvm] iwl_mvm_config_scan+0x198/0x260 [iwlmvm] iwl_mvm_recalc_tcm+0x730/0x11d0 [iwlmvm] iwl_mvm_tcm_work+0x1d/0x30 [iwlmvm] process_one_work+0x29e/0x640 worker_thread+0x2df/0x690 ? rescuer_thread+0x540/0x540 kthread+0x192/0x1e0 ? set_kthread_struct+0x90/0x90 ret_from_fork+0x22/0x30 Signed-off-by:
-
Anjaneyulu authored
Check size of WGDS revision 3 is equal to 8 entries size with some header, but doesn't depend on the number of used entries. Check that used entries are between min and max but allow more to be present than are used to fix operation with some BIOSes that have such data. Fixes: 97f8a3d1 ("iwlwifi: ACPI: support revision 3 WGDS tables") Signed-off-by:
Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
iwl_mvm_select_links is called by the link selection worker and it requires the mutex. Take it in the link selection worker. This logic used to run from iwl_mvm_rx_umac_scan_complete_notif which had the mvm->mutex held. This was changed to run in a worker holding the wiphy mutex, but we also need the mvm->mutex. Fixes: 2e194efa ("wifi: iwlwifi: mvm: Fix race in scan completion") Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Daniel Gabay authored
Driver creates also the WFA TPC element, consider that in the calculation. Signed-off-by:
Daniel Gabay <daniel.gabay@intel.com> Reviewed-by:
-
Daniel Gabay authored
The calculation should consider also the 6GHz IE's len, fix that. In addition, in iwl_mvm_sched_scan_start() the scan_fits helper is called only in case non_psc_incldued is true, but it should be called regardless, fix that as well. Signed-off-by:
-
Benjamin Berg authored
An invalid buffer destination is not a problem for the driver and it does not make sense to report it with the KERN_ERR message level. As such, change the message to use IWL_DEBUG_FW. Reported-by:
Len Brown <lenb@kernel.org> Closes: https://lore.kernel.org/r/CAJvTdKkcxJss=DM2sxgv_MR5BeZ4_OC-3ad6tA40TYH2yqHCWw@mail.gmail.comSigned-off-by:
Benjamin Berg <benjamin.berg@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
Fast resume is a feature that was recently introduced to speed up the resume time. It basically keeps the firmware alive while the system is suspended and that avoids starting again the whole device. This flow can't work for hibernation, since when the system boots, before the frozen image is loaded, the kernel may touch the device. As a result, we can't assume the device is in the exact same state as before the hibernation. Detect that we are resuming from hibernation through the PCI device and forbid the fast resume flow. We also need to shut down the device cleanly when that happens. In addition, in case the device is power gated during S3, we won't be able to keep the device alive. Detect this situation with BE200 at least with the help of the CSR_FUNC_SCRATCH register and reset the device upon resume if it was power gated during S3. Fixes: e8bb19c1 ("wifi: iwlwifi: support fast resume") Signed-off-by:
-
Daniel Gabay authored
Return false when memcmp with zero_ssid returns 0 to correctly handle hidden SSIDs case. Fixes: 9cc88678 ("wifi: mac80211: check SSID in beacon") Reviewed-by:
Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by:
-
- 16 Aug, 2024 1 commit
-
-
Sascha Hauer authored
mwifiex_band_2ghz and mwifiex_band_5ghz are statically allocated, but used and modified in driver instances. Duplicate them before using them in driver instances so that different driver instances do not influence each other. This was observed on a board which has one PCIe and one SDIO mwifiex adapter. It blew up in mwifiex_setup_ht_caps(). This was called with the statically allocated struct which is modified in this function. Cc: stable@vger.kernel.org Fixes: d6bffe8b ("mwifiex: support for creation of AP interface") Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240809-mwifiex-duplicate-static-structs-v1-1-6837b903b1a4@pengutronix.de
-
- 13 Aug, 2024 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ath/athKalle Valo authored
ath.git patch for v6.11 We have a single patch for the next 6.11-rc which introduces a workaround to ath12k which addresses a WCN7850 hardware issue that prevents proper operation with unaligned transmit buffers.
-
Benjamin Berg authored
The code to lookup the scatter gather table entry assumed that it was possible to use sg_virt() in order to lookup the DMA address in a mapped scatter gather table. However, this assumption is incorrect as the DMA mapping code may merge multiple entries into one. In that case, the DMA address space may have e.g. two consecutive pages which is correctly represented by the scatter gather list entry, however the virtual addresses for these two pages may differ and the relationship cannot be resolved anymore. Avoid this problem entirely by working with the offset into the mapped area instead of using virtual addresses. With that we only use the DMA length and DMA address from the scatter gather list entries. The underlying DMA/IOMMU code is therefore free to merge two entries into one even if the virtual addresses space for the area is not continuous. Fixes: 90db5075 ("wifi: iwlwifi: use already mapped data when TXing an AMSDU") Reported-by:
Chris Bainbridge <chris.bainbridge@gmail.com> Closes: https://lore.kernel.org/r/ZrNRoEbdkxkKFMBi@debian.localSigned-off-by:
-
Bert Karwatzki authored
When disabling wifi mt7921_ipv6_addr_change() is called as a notifier. At this point mvif->phy is already NULL so we cannot use it here. Signed-off-by:
Bert Karwatzki <spasswolf@web.de> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
- 10 Aug, 2024 1 commit
-
-
Janne Grunau authored
wpa_supplicant 2.11 sends since 1efdba5fdc2c ("Handle PMKSA flush in the driver for SAE/OWE offload cases") SSID based PMKSA del commands. brcmfmac is not prepared and tries to dereference the NULL bssid and pmkid pointers in cfg80211_pmksa. PMKID_V3 operations support SSID based updates so copy the SSID. Fixes: a96202ac ("wifi: brcmfmac: cfg80211: Add support for PMKID_V3 operations") Cc: stable@vger.kernel.org # 6.4.x Signed-off-by:Janne Grunau <j@jannau.net> Reviewed-by:
Neal Gompa <neal@gompa.dev> Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
- 07 Aug, 2024 1 commit
-
-
Bitterblue Smith authored
GCC complains: In file included from include/linux/ieee80211.h:21, from include/net/mac80211.h:20, from drivers/net/wireless/realtek/rtlwifi/rtl8192du/../wifi.h:14, from drivers/net/wireless/realtek/rtlwifi/rtl8192du/hw.c:4: In function 'u32p_replace_bits', inlined from '_rtl92du_init_queue_reserved_page.isra' at drivers/net/wireless/realtek/rtlwifi/rtl8192du/hw.c:225:2: >> include/linux/bitfield.h:189:18: warning: 'value32' is used uninitialized [-Wuninitialized] Part of the variable is indeed left uninitialised. Reported-by:kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202408062100.DWhN0CYH-lkp@intel.com/ Fixes: e769c671 ("wifi: rtlwifi: Add rtl8192du/hw.{c,h}") Signed-off-by:
Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
- 05 Aug, 2024 1 commit
-
-
Baochen Qiang authored
In transmit path, it is likely that the iova is not aligned to PCIe TLP max payload size, which is 128 for WCN7850. Normally in such cases hardware is expected to split the packet into several parts in a manner such that they, other than the first one, have aligned iova. However due to hardware limitations, WCN7850 does not behave like that properly with some specific unaligned iova in transmit path. This easily results in target hang in a KPI transmit test: packet send/receive failure, WMI command send timeout etc. Also fatal error seen in PCIe level: ... Capabilities: ... ... DevSta: ... FatalErr+ ... ... ... Work around this by manually moving/reallocating payload buffer such that we can map it to a 128 bytes aligned iova. The moving requires sufficient head room or tail room in skb: for the former we can do ourselves a favor by asking some extra bytes when registering with mac80211, while for the latter we can do nothing. Moving/reallocating buffer consumes additional CPU cycles, but the good news is that an aligned iova increases PCIe efficiency. In my tests on some X86 platforms the KPI results are almost consistent. Since this is seen only with WCN7850, add a new hardware parameter to differentiate from others. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
Baochen Qiang <quic_bqiang@quicinc.com> Cc: <stable@vger.kernel.org> Tested-by:
Mark Pearson <mpearson-lenovo@squebb.ca> Signed-off-by:
Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240715023814.20242-1-quic_bqiang@quicinc.com
-
- 04 Aug, 2024 11 commits
-
-
Linus Torvalds authored
-
Tetsuo Handa authored
The kernel sleep profile is no longer working due to a recursive locking bug introduced by commit 42a20f86 ("sched: Add wrapper for get_wchan() to keep task blocked") Booting with the 'profile=sleep' kernel command line option added or executing # echo -n sleep > /sys/kernel/profiling after boot causes the system to lock up. Lockdep reports kthreadd/3 is trying to acquire lock: ffff93ac82e08d58 (&p->pi_lock){....}-{2:2}, at: get_wchan+0x32/0x70 but task is already holding lock: ffff93ac82e08d58 (&p->pi_lock){....}-{2:2}, at: try_to_wake_up+0x53/0x370 with the call trace being lock_acquire+0xc8/0x2f0 get_wchan+0x32/0x70 __update_stats_enqueue_sleeper+0x151/0x430 enqueue_entity+0x4b0/0x520 enqueue_task_fair+0x92/0x6b0 ttwu_do_activate+0x73/0x140 try_to_wake_up+0x213/0x370 swake_up_locked+0x20/0x50 complete+0x2f/0x40 kthread+0xfb/0x180 However, since nobody noticed this regression for more than two years, let's remove 'profile=sleep' support based on the assumption that nobody needs this functionality. Fixes: 42a20f86 ("sched: Add wrapper for get_wchan() to keep task blocked") Cc: stable@vger.kernel.org # v5.16+ Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: - Prevent a deadlock on cpu_hotplug_lock in the aperf/mperf driver. A recent change in the ACPI code which consolidated code pathes moved the invocation of init_freq_invariance_cppc() to be moved to a CPU hotplug handler. The first invocation on AMD CPUs ends up enabling a static branch which dead locks because the static branch enable tries to acquire cpu_hotplug_lock but that lock is already held write by the hotplug machinery. Use static_branch_enable_cpuslocked() instead and take the hotplug lock read for the Intel code path which is invoked from the architecture code outside of the CPU hotplug operations. - Fix the number of reserved bits in the sev_config structure bit field so that the bitfield does not exceed 64 bit. - Add missing Zen5 model numbers - Fix the alignment assumptions of pti_clone_pgtable() and clone_entry_text() on 32-bit: The code assumes PMD aligned code sections, but on 32-bit the kernel entry text is not PMD aligned. So depending on the code size and location, which is configuration and compiler dependent, entry text can cross a PMD boundary. As the start is not PMD aligned adding PMD size to the start address is larger than the end address which results in partially mapped entry code for user space. That causes endless recursion on the first entry from userspace (usually #PF). Cure this by aligning the start address in the addition so it ends up at the next PMD start address. clone_entry_text() enforces PMD mapping, but on 32-bit the tail might eventually be PTE mapped, which causes a map fail because the PMD for the tail is not a large page mapping. Use PTI_LEVEL_KERNEL_IMAGE for the clone() invocation which resolves to PTE on 32-bit and PMD on 64-bit. - Zero the 8-byte case for get_user() on range check failure on 32-bit The recend consolidation of the 8-byte get_user() case broke the zeroing in the failure case again. Establish it by clearing ECX before the range check and not afterwards as that obvioulsy can't be reached when the range check fails * tag 'x86-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/uaccess: Zero the 8-byte get_range case on failure on 32-bit x86/mm: Fix pti_clone_entry_text() for i386 x86/mm: Fix pti_clone_pgtable() alignment assumption x86/setup: Parse the builtin command line before merging x86/CPU/AMD: Add models 0x60-0x6f to the Zen5 range x86/sev: Fix __reserved field in sev_config x86/aperfmperf: Fix deadlock on cpu_hotplug_lock
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "Two fixes for the timer/clocksource code: - The recent fix to make the take over of the broadcast timer more reliable retrieves a per CPU pointer in preemptible context. This went unnoticed in testing as some compilers hoist the access into the non-preemotible section where the pointer is actually used, but obviously compilers can rightfully invoke it where the code put it. Move it into the non-preemptible section right to the actual usage side to cure it. - The clocksource watchdog is supposed to emit a warning when the retry count is greater than one and the number of retries reaches the limit. The condition is backwards and warns always when the count is greater than one. Fixup the condition to prevent spamming dmesg" * tag 'timers-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Fix brown-bag boolean thinko in cs_watchdog_read() tick/broadcast: Move per CPU pointer access into the atomic section -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: - When stime is larger than rtime due to accounting imprecision, then utime = rtime - stime becomes negative. As this is unsigned math, the result becomes a huge positive number. Cure it by resetting stime to rtime in that case, so utime becomes 0. - Restore consistent state when sched_cpu_deactivate() fails. When offlining a CPU fails in sched_cpu_deactivate() after the SMT present counter has been decremented, then the function aborts but fails to increment the SMT present counter and leaves it imbalanced. Consecutive operations cause it to underflow. Add the missing fixup for the error path. For SMT accounting the runqueue needs to marked online again in the error exit path to restore consistent state. * tag 'sched-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Fix unbalance set_rq_online/offline() in sched_cpu_deactivate() sched/core: Introduce sched_set_rq_on/offline() helper sched/smt: Fix unbalance sched_smt_present dec/inc sched/smt: Introduce sched_smt_present_inc/dec() helper sched/cputime: Fix mul_u64_u64_div_u64() precision for cputime
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf fixes from Thomas Gleixner: - Move the smp_processor_id() invocation back into the non-preemtible region, so that the result is valid to use - Add the missing package C2 residency counters for Sierra Forest CPUs to make the newly added support actually useful * tag 'perf-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix smp_processor_id()-in-preemptible warnings perf/x86/intel/cstate: Add pkg C2 residency counter for Sierra Forest
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A couple of fixes for interrupt chip drivers: - Make sure to skip the clear register space in the MBIGEN driver when calculating the node register index. Otherwise the clear register is clobbered and the wrong node registers are accessed. - Fix a signed/unsigned confusion in the loongarch CPU driver which converts an error code to a huge "valid" interrupt number. - Convert the mesion GPIO interrupt controller lock to a raw spinlock so it works on RT. - Add a missing static to a internal function in the pic32 EVIC driver" * tag 'irq-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mbigen: Fix mbigen node address layout irqchip/meson-gpio: Convert meson_gpio_irq_controller::lock to 'raw_spinlock_t' irqchip/irq-pic32-evic: Add missing 'static' to internal function irqchip/loongarch-cpu: Fix return value of lpic_gsi_to_irq() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Thomas Gleixner: "Two fixes for locking and jump labels: - Ensure that the atomic_cmpxchg() conditions are correct and evaluating to true on any non-zero value except 1. The missing check of the return value leads to inconsisted state of the jump label counter. - Add a missing type conversion in the paravirt spinlock code which makes loongson build again" * tag 'locking-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: jump_label: Fix the fix, brown paper bags galore locking/pvqspinlock: Correct the type of "old" variable in pv_kick_node() -
Rob Herring (Arm) authored
Commit 04f08ef2 ("arm/arm64: dts: arm: Use generic clock and regulator nodenames") renamed nodes and created 2 "clock-24000000" nodes (at different paths). The kernel can't handle these duplicate names even though they are at different paths. Fix this by renaming one of the nodes to "clock-pclk". This name is aligned with other Arm boards (those didn't have a known frequency to use in the node name). Fixes: 04f08ef2 ("arm/arm64: dts: arm: Use generic clock and regulator nodenames") Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Rob Herring (Arm) <robh@kernel.org> Tested-by:
Linus Walleij <linus.walleij@linaro.org> Tested-by:
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: - two reparse point fixes - minor cleanup - additional trace point (to help debug a recent problem) * tag '6.11-rc1-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal version number smb: client: fix FSCTL_GET_REPARSE_POINT against NetApp smb3: add dynamic tracepoints for shutdown ioctl cifs: Remove cifs_aio_ctx smb: client: handle lack of FSCTL_GET_REPARSE_POINT support
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: - two Kconfig fixes - one fix for the UVC driver addressing probing time detection of a UVC custom controls - one fix related to PDF generation * tag 'media/v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: v4l: Fix missing tabular column hint for Y14P format media: intel/ipu6: select AUXILIARY_BUS in Kconfig media: ipu-bridge: fix ipu6 Kconfig dependencies media: uvcvideo: Fix custom control mapping probing
-
- 03 Aug, 2024 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "One core change that reverts the double message print patch in sd.c (it was causing regressions on embedded systems). The rest are driver fixes in ufs, mpt3sas and mpi3mr" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: exynos: Don't resume FMP when crypto support is disabled scsi: mpt3sas: Avoid IOMMU page faults on REPORT ZONES scsi: mpi3mr: Avoid IOMMU page faults on REPORT ZONES scsi: ufs: core: Do not set link to OFF state while waking up from hibernation scsi: Revert "scsi: sd: Do not repeat the starting disk message" scsi: ufs: core: Fix deadlock during RTC update scsi: ufs: core: Bypass quick recovery if force reset is needed scsi: ufs: core: Check LSDBS cap when !mcq
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Chandan Babu: - Fix memory leak when corruption is detected during scrubbing parent pointers - Allow SECURE namespace xattrs to use reserved block pool to in order to prevent ENOSPC - Save stack space by passing tracepoint's char array to file_path() instead of another stack variable - Remove unused parameter in macro XFS_DQUOT_LOGRES - Replace comma with semicolon in a couple of places * tag 'xfs-6.11-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: convert comma to semicolon xfs: convert comma to semicolon xfs: remove unused parameter in macro XFS_DQUOT_LOGRES xfs: fix file_path handling in tracepoints xfs: allow SECURE namespace xattrs to use reserved block pool xfs: fix a memory leak
-
Linus Torvalds authored
Merge tag 'parisc-for-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - fix unaligned memory accesses when calling BPF functions - adjust memory size constants to fix possible DMA corruptions * tag 'parisc-for-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix a possible DMA corruption parisc: fix unaligned accesses in BPF
-
Linus Torvalds authored
The runtime constants linker script depended on documented linker behavior [1]: "If an output section’s name is the same as the input section’s name and is representable as a C identifier, then the linker will automatically PROVIDE two symbols: __start_SECNAME and __stop_SECNAME, where SECNAME is the name of the section. These indicate the start address and end address of the output section respectively" to just automatically define the symbol names for the bounds of the runtime constant arrays. It turns out that this isn't actually something we can rely on, with old linkers not generating these automatic symbols. It looks to have been introduced in binutils-2.29 back in 2017, and we still support building with versions all the way back to binutils-2.25 (from 2015). And yes, Oleg actually seems to be using such ancient versions of binutils. So instead of depending on the implicit symbols from "section names match and are representable C identifiers", just do this all manually. It's not like it causes us any extra pain, we already have to do that for all the other sections that we use that often have special characters in them. Reported-and-tested-by:
Oleg Nesterov <oleg@redhat.com> Link: https://sourceware.org/binutils/docs/ld/Input-Section-Example.html [1] Link: https://lore.kernel.org/all/20240802114518.GA20924@redhat.com/Signed-off-by:
-
Hans Verkuil authored
Merge tag 'tags/fixes-media-uvc-20230722' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git uvcvideo v6.11 regression fix: fix custom control mapping probing Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
- 02 Aug, 2024 7 commits
-
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "Two minor tweaks for the NAPI handling, both from Olivier: - Kill two unused list definitions - Ensure that multishot NAPI doesn't age away" * tag 'io_uring-6.11-20240802' of git://git.kernel.dk/linux: io_uring: remove unused local list heads in NAPI functions io_uring: keep multishot request NAPI timeout current
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull thermal control fixes from Rafael Wysocki: "These fix a few issues related to the MSI IRQs management in the int340x thermal driver, fix a thermal core issue that may lead to missing trip point crossing events and update the thermal core documentation. Specifics: - Fix MSI error path cleanup in int340x, allow it to work with a subset of thermal MSI IRQs if some of them are not working and make it free all MSI IRQs on module exit (Srinivas Pandruvada) - Fix a thermal core issue that may lead to missing trip point crossing events in some cases when thermal_zone_set_trips() is used and update the thermal core documentation (Rafael Wysocki)" * tag 'thermal-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: core: Update thermal zone registration documentation thermal: trip: Avoid skipping trips in thermal_zone_set_trips() thermal: intel: int340x: Free MSI IRQ vectors on module exit thermal: intel: int340x: Allow limited thermal MSI support thermal: intel: int340x: Fix kernel warning during MSI cleanup -
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - Expand the speculative SSBS errata workaround to more CPUs - Ensure jump label changes are visible to all CPUs with a kick_all_cpus_sync() (and also enable jump label batching as part of the fix) - The shadow call stack sanitiser is currently incompatible with Rust, make CONFIG_RUST conditional on !CONFIG_SHADOW_CALL_STACK * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: jump_label: Ensure patched jump_labels are visible to all CPUs rust: SHADOW_CALL_STACK is incompatible with Rust arm64: errata: Expand speculative SSBS workaround (again) arm64: cputype: Add Cortex-A725 definitions arm64: cputype: Add Cortex-X1C definitions
-
https://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fix from Ilya Dryomov: "A fix for a potential hang in the MDS when cap revocation races with the client releasing the caps in question, marked for stable" * tag 'ceph-for-6.11-rc2' of https://github.com/ceph/ceph-client: ceph: force sending a cap update msg back to MDS for revoke op
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm updates from Paolo Bonzini: "The bulk of the changes here is a largish change to guest_memfd, delaying the clearing and encryption of guest-private pages until they are actually added to guest page tables. This started as "let's make it impossible to misuse the API" for SEV-SNP; but then it ballooned a bit. The new logic is generally simpler and more ready for hugepage support in guest_memfd. Summary: - fix latent bug in how usage of large pages is determined for confidential VMs - fix "underline too short" in docs - eliminate log spam from limited APIC timer periods - disallow pre-faulting of memory before SEV-SNP VMs are initialized - delay clearing and encrypting private memory until it is added to guest page tables - this change also enables another small cleanup: the checks in SNP_LAUNCH_UPDATE that limit it to non-populated, private pages can now be moved in the common kvm_gmem_populate() function - fix compilation error that the RISC-V merge introduced in selftests" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86/mmu: fix determination of max NPT mapping level for private pages KVM: riscv: selftests: Fix compile error KVM: guest_memfd: abstract how prepared folios are recorded KVM: guest_memfd: let kvm_gmem_populate() operate only on private gfns KVM: extend kvm_range_has_memory_attributes() to check subset of attributes KVM: cleanup and add shortcuts to kvm_range_has_memory_attributes() KVM: guest_memfd: move check for already-populated page to common code KVM: remove kvm_arch_gmem_prepare_needed() KVM: guest_memfd: make kvm_gmem_prepare_folio() operate on a single struct kvm KVM: guest_memfd: delay kvm_gmem_prepare_folio() until the memory is passed to the guest KVM: guest_memfd: return locked folio from __kvm_gmem_get_pfn KVM: rename CONFIG_HAVE_KVM_GMEM_* to CONFIG_HAVE_KVM_ARCH_GMEM_* KVM: guest_memfd: do not go through struct page KVM: guest_memfd: delay folio_mark_uptodate() until after successful preparation KVM: guest_memfd: return folio from __kvm_gmem_get_pfn() KVM: x86: disallow pre-fault for SNP VMs before initialization KVM: Documentation: Fix title underline too short warning KVM: x86: Eliminate log spam from limited APIC timer periods -
Paolo Bonzini authored
* fix latent bug in how usage of large pages is determined for confidential VMs * fix "underline too short" in docs * eliminate log spam from limited APIC timer periods * disallow pre-faulting of memory before SEV-SNP VMs are initialized * delay clearing and encrypting private memory until it is added to guest page tables * this change also enables another small cleanup: the checks in SNP_LAUNCH_UPDATE that limit it to non-populated, private pages can now be moved in the common kvm_gmem_populate() function
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - A fix to avoid dropping some of the internal pseudo-extensions, which breaks *envcfg dependency parsing - The kernel entry address is now aligned in purgatory, which avoids a misaligned load that can lead to crash on systems that don't support misaligned accesses early in boot - The FW_SFENCE_VMA_RECEIVED perf event was duplicated in a handful of perf JSON configurations, one of them been updated to FW_SFENCE_VMA_ASID_SENT - The starfive cache driver is now restricted to 64-bit systems, as it isn't 32-bit clean - A fix for to avoid aliasing legacy-mode perf counters with software perf counters - VM_FAULT_SIGSEGV is now handled in the page fault code - A fix for stalls during CPU hotplug due to IPIs being disabled - A fix for memblock bounds checking. This manifests as a crash on systems with discontinuous memory maps that have regions that don't fit in the linear map * tag 'riscv-for-linus-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fix linear mapping checks for non-contiguous memory regions RISC-V: Enable the IPI before workqueue_online_cpu() riscv/mm: Add handling for VM_FAULT_SIGSEGV in mm_fault_error() perf: riscv: Fix selecting counters in legacy mode cache: StarFive: Require a 64-bit system perf arch events: Fix duplicate RISC-V SBI firmware event name riscv/purgatory: align riscv_kernel_entry riscv: cpufeature: Do not drop Linux-internal extensions
-
