- 13 Sep, 2022 14 commits
-
-
Philip Yang authored
migrate_vma_setup shows below warning because we don't hold another process mm mmap_lock. We should use current vmf->vma->vm_mm instead, the caller already hold current mmap lock inside CPU page fault handler. WARNING: CPU: 10 PID: 3054 at include/linux/mmap_lock.h:155 find_vma Call Trace: walk_page_range+0x76/0x150 migrate_vma_setup+0x18a/0x640 svm_migrate_vram_to_ram+0x245/0xa10 [amdgpu] svm_migrate_to_ram+0x36f/0x470 [amdgpu] do_swap_page+0xcfe/0xec0 __handle_mm_fault+0x96b/0x15e0 handle_mm_fault+0x13f/0x3e0 do_user_addr_fault+0x1e7/0x690 Fixes: e1f84eef ("drm/amdkfd: handle CPU fault on COW mapping") Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Yang Wang authored
align TMR BO size TO tmr size is not necessary, modify the size to 1M to avoid re-create BO fail when serious VRAM fragmentation. v2: add new macro PSP_TMR_ALIGNMENT for TMR BO alignment size Signed-off-by:
Yang Wang <KevinYang.Wang@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Candice Li authored
Enable full reset for RAS supported configuration on gc v11_0_0. v2: simplify the code. Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
-
Candice Li authored
Only check MCUMC_STATUS for CE counter for umc v8_10. Signed-off-by:
-
Charlene Liu authored
[why] update header files, and remove not used register access marco Reviewed-by:
Hansen Dsouza <hansen.dsouza@amd.com> Acked-by:
Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by:
Charlene Liu <Charlene.Liu@amd.com> Signed-off-by:
-
Philip Yang authored
Prefaulting potentially allocates system memory pages before a migration. This adds unnecessary overhead. Instead we can skip unallocated pages in the migration and just point migrate->dst to a 0-initialized VRAM page directly. Then the VRAM page will be inserted to the PTE. A subsequent CPU page fault will migrate the page back to system memory. Signed-off-by:
-
Philip Yang authored
If CPU page fault in a page with zone_device_data svm_bo from another process, that means it is COW mapping in the child process and the range is migrated to VRAM by parent process. Migrate the parent process range back to system memory to recover the CPU page fault. Signed-off-by:
-
wangjianli authored
Delete the redundant word 'to'. Signed-off-by:
wangjianli <wangjianli@cdjrlc.com> Signed-off-by:
-
shaoyunl authored
For SRIOV configuration, host driver control the reset method(either FLR or heavier chain reset). The host will notify the guest individually with FLR message if individual GPU within the hive need to be reset. So for guest side, no need to use hive->reset_domain to replace the original per device reset_domain Signed-off-by:
shaoyunl <shaoyun.liu@amd.com> Reviewed-by:
-
Tom St Denis authored
The 10.3 GC headers were missing most of the pwrdec block. This patch adds the registers and bits present in the 10.1 header but based on the contents of the 10.3 specs. Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Rajneesh Bhardwaj authored
Recently introduced change to allocate doorbells only when the first queue is created or mapped for CPU / GPU access, did not consider Checkpoint Restore scenario completely. This fix allows the CRIU restore operation by extending the doorbell optimization to CRIU restore scenario. Fixes: 16f00131 ("drm/amdkfd: Allocate doorbells only when needed") Reviewed-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by:
-
Hamza Mahfooz authored
Currently, we aren't handling DRM_IOCTL_MODE_DIRTYFB. So, use drm_atomic_helper_dirtyfb() as the dirty callback in the amdgpu_fb_funcs struct. Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by:
-
Lijo Lazar authored
As per PCIE Base Spec r4.0 Section 6.18 'Software must not enable LTR in an Endpoint unless the Root Complex and all intermediate Switches indicate support for LTR.' This fixes the Unsupported Request error reported through AER during ASPM enablement. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216455 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Reported-by:
Gustaw Smolarczyk <wielkiegie@gmail.com> Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
-
Guchun Chen authored
To avoid hardware intermittent failures. Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
-
- 12 Sep, 2022 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2022-09-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - Revert "drm/i915/dg2: Add preemption changes for Wa_14015141709" The intent of Wa_14015141709 was to inform us that userspace can no longer control object-level preemption as it has on past platforms (i.e., by twiddling register bit CS_CHICKEN1[0]). The description of the workaround in the spec wasn't terribly well-written, and when we requested clarification from the hardware teams we were told that on the kernel side we should also probably stop setting FF_SLICE_CS_CHICKEN1[14], which is the register bit that directs the hardware to honor the settings in per-context register CS_CHICKEN1. It turns out that this guidance about FF_SLICE_CS_CHICKEN1[14] was a mistake; even though CS_CHICKEN1[0] is non-operational and useless to userspace, there are other bits in the register that do still work and might need to be adjusted by userspace in the future (e.g., to implement other workarounds that show up). If we don't set FF_SLICE_CS_CHICKEN1[14] in i915, then those future workarounds would not take effect. Even more details at: https://lists.freedesktop.org/archives/intel-gfx/2022-September/305478.html Driver Changes: - Align GuC/HuC firmware versioning scheme to kernel practices (John) - Fix #6639: h264 hardware video decoding broken in 5.19 on Intel(R) Celeron(R) N3060 (Nirmoy) - Meteorlake (MTL) enabling (Matt R) - GuC SLPC improvements (Vinay, Rodrigo) - Add thread execution tuning setting for ATS-M (Matt R) - Don't start PXP without mei_pxp bind (Juston) - Remove leftover verbose debug logging from GuC error capture (John) - Abort suspend on low system memory conditions (Nirmoy, Matt A, Chris) - Add DG2 Wa_16014892111 (Matt R) - Rename ggtt_view as gtt_view (Niranjana) - Consider HAS_FLAT_CCS() in needs_ccs_pages (Matt A) - Don't try to disable host RPS when this was never enabled. (Rodrigo) - Clear stalled GuC CT request after a reset (Daniele) - Remove runtime info printing from GuC time stamp logging (Jani) - Skip Bit12 fw domain reset for gen12+ (Sushma, Radhakrishna) - Make GuC log sizes runtime configurable (John) - Selftest improvements (Daniele, Matt B, Andrzej) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YxshfqUN+vDe92Zn@jlahtine-mobl.ger.corp.intel.com
-
https://gitlab.freedesktop.org/agd5f/linuxDave Airlie authored
amd-drm-next-6.1-2022-09-08: amdgpu: - Mode2 reset for RDNA2 - Lots of new DC documentation - Add documentation about different asic families - DSC improvements - Aldebaran fixes - Misc spelling and grammar fixes - GFXOFF stats support for vangogh - DC frame size fixes - NBIO 7.7 updates - DCN 3.2 updates - DCN 3.1.4 Updates - SMU 13.x updates - Misc bug fixes - Rework DC register offset handling - GC 11.x updates - PSP 13.x updates - SDMA 6.x updates - GMC 11.x updates - SR-IOV updates - PSP fixes for TA unloading - DSC passthrough support - Misc code cleanups amdkfd: - ISA fixes for some GC 10.3 IPs - Misc code cleanups radeon: - Delayed work flush fix - Use time_after for some jiffies calculations drm: - DSC passthrough aux support Signed-off-by:
-
- 11 Sep, 2022 2 commits
-
-
Melissa Wen authored
Replace vkms_formats macro for fixed-point operations with functions from drm/drm_fixed.h to do the same job and fix 32-bit compilation errors. v2: - don't cast results to s32 (Igor) - add missing drm_fixp2int conversion (Igor) Fixes: a19c2ac9858 ("drm: vkms: Add support to the RGB565 format") Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> (v1) Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reported-by:Sudip Mukherjee <sudipm.mukherjee@gmail.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v6.1-rc1: [airlied - fix sun4i_tv build] UAPI Changes: - Hide unregistered connectors from GETCONNECTOR ioctl. - drm/virtio no longer advertises LINEAR modifier, as it doesn't work. - Cross-subsystem Changes: - Fix GPF in udmabuf failure path. Core Changes: - Rework TTM placement to use intersect/compatible functions. - Drop legacy DP-MST support. - More DP-MST related fixes, and move all state into atomic. - Make DRM_MIPI_DBI select DRM_KMS_HELPER. - Add audio_infoframe packing for DP. - Add logging when some atomic check functions fail. - Assorted documentation updates and fixes. Driver Changes: - Assorted cleanups and fixes in msm, lcdif, nouveau, virtio, panel/ilitek, bridge/icn6211, tve200, gma500, bridge/*, panfrost, via, bochs, qxl, sun4i. - Add add AUO B133UAN02.1, IVO M133NW4J-R3, Innolux N120ACA-EA1 eDP panels. - Improve DP-MST modeset state handling in amdgpu, nouveau, i915. - Drop DP-MST from radeon driver, it was broken and only user of legacy DP-MST. - Handle unplugging better in vc4. - Simplify drm cmdparser tests. - Add DP support to ti-sn65dsi86. - Add MT8195 DP support to mediatek. - Support RGB565, XRGB64, and ARGB64 formats in vkms. - Convert sun4i tv support to atomic. - Refactor vc4/vec TV Modesetting, and fix timings. - Use atomic helpers instead of simple display helpers in ssd130x. Maintainer changes: - Add Douglas Anderson as reviewer for panel-edp. Signed-off-by:
-
- 08 Sep, 2022 15 commits
-
-
Imre Deak authored
When an MST connector stays enabled during a commit the connector's MST state needs to be added to the atomic state, but the corresponding MST payload allocation shouldn't be set for deletion; fix such modesets by ensuring the above even if the connector was already enabled before the modeset. The issue led to the following: [ 761.992923] i915 0000:00:02.0: drm_WARN_ON(payload->delete) [ 761.992949] WARNING: CPU: 6 PID: 1401 at drivers/gpu/drm/display/drm_dp_mst_topology.c:4221 drm_dp_atomic_find_time_slots+0x236/0x280 [drm_display_helper] [ 761.992955] Modules linked in: snd_hda_intel i915 drm_buddy drm_display_helper drm_kms_helper ttm drm snd_hda_codec_hdmi snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm prime_numbers i2c_algo_bit syscopyarea sysfillrect sysimgblt fb_sys_fops x86_pkg_temp_thermal cdc_ether coretemp crct10dif_pclmul usbnet crc32_pclmul mii ghash_clmulni_intel e1000e mei_me ptp i2c_i801 pps_core mei i2c_smbus intel_lpss_pci fuse [last unloaded: drm] [ 761.992986] CPU: 6 PID: 1401 Comm: testdisplay Tainted: G U 6.0.0-rc4-imre+ #565 [ 761.992989] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS ADLPFWI1.R00.3135.A00.2203251419 03/25/2022 [ 761.992990] RIP: 0010:drm_dp_atomic_find_time_slots+0x236/0x280 [drm_display_helper] [ 761.992994] Code: 4c 8b 67 50 4d 85 e4 75 03 4c 8b 27 e8 03 28 4e e1 48 c7 c1 8b 26 2c a0 4c 89 e2 48 c7 c7 a8 26 2c a0 48 89 c6 e8 31 d5 88 e1 <0f> 0b 49 8b 85 d0 00 00 00 4c 89 fa 48 c7 c6 a0 41 2c a0 48 8b 78 [ 761.992995] RSP: 0018:ffffc9000177ba60 EFLAGS: 00010286 [ 761.992998] RAX: 0000000000000000 RBX: ffff88810d2f1540 RCX: 0000000000000000 [ 761.992999] RDX: 0000000000000001 RSI: ffffffff82368a25 RDI: 00000000ffffffff [ 761.993000] RBP: ffff888142299d80 R08: ffff8884adbfdfe8 R09: 00000000ffefffff [ 761.993001] R10: ffff8884a6bfe000 R11: ffff8884ac443c30 R12: ffff888102972f90 [ 761.993002] R13: ffff8881163e2cf0 R14: 00000000000003ac R15: ffff88810c501000 [ 761.993003] FS: 00007f81e4c459c0(0000) GS:ffff888496500000(0000) knlGS:0000000000000000 [ 761.993004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 761.993005] CR2: 0000555dac962a98 CR3: 0000000123a34006 CR4: 0000000000770ee0 [ 761.993006] PKRU: 55555554 [ 761.993007] Call Trace: [ 761.993009] <TASK> [ 761.993012] intel_dp_mst_compute_config+0x19a/0x350 [i915] [ 761.993090] intel_atomic_check+0xf37/0x3180 [i915] [ 761.993168] drm_atomic_check_only+0x5d3/0xa60 [drm] [ 761.993182] drm_atomic_commit+0x56/0xc0 [drm] [ 761.993192] ? drm_plane_get_damage_clips.cold+0x1c/0x1c [drm] [ 761.993204] drm_atomic_helper_set_config+0x78/0xc0 [drm_kms_helper] [ 761.993214] drm_mode_setcrtc+0x1ed/0x750 [drm] [ 761.993232] ? drm_mode_getcrtc+0x180/0x180 [drm] [ 761.993241] drm_ioctl_kernel+0xb5/0x150 [drm] [ 761.993252] drm_ioctl+0x203/0x3d0 [drm] [ 761.993261] ? drm_mode_getcrtc+0x180/0x180 [drm] [ 761.993276] __x64_sys_ioctl+0x8a/0xb0 [ 761.993281] do_syscall_64+0x38/0x90 [ 761.993285] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 761.993287] RIP: 0033:0x7f81e551aaff [ 761.993288] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00 [ 761.993290] RSP: 002b:00007fff4304af10 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 761.993292] RAX: ffffffffffffffda RBX: 00007fff4304afa0 RCX: 00007f81e551aaff [ 761.993293] RDX: 00007fff4304afa0 RSI: 00000000c06864a2 RDI: 0000000000000004 [ 761.993294] RBP: 00000000c06864a2 R08: 0000000000000000 R09: 0000555dac8a9c68 [ 761.993294] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000008c4 [ 761.993295] R13: 0000000000000004 R14: 0000555dac8a9c68 R15: 00007fff4304b098 [ 761.993301] </TASK> Fixes: 083351e9 ("drm/display/dp_mst: Fix modeset tracking in drm_dp_atomic_release_vcpi_slots()") Testcase: igt@testdisplay Cc: Lyude Paul <lyude@redhat.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907142542.1681994-1-imre.deak@intel.com
-
Chen-Yu Tsai authored
This panel has the same delay timing as N116BCA-EA1 from the same company, which is also the same as delay_200_500_e80_d50. Add an entry for it. Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Maxime Ripard authored
Our mode_set implementation can be merged into our atomic_enable implementation to simplify things, so let's do this. Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-36-459522d653a7@cerno.tech
-
Nirmoy Das authored
Fix regression introduced by commit: "drm/i915: Individualize fences before adding to dma_resv obj" which sets obj->read_domains to 0 for both read and write paths. Also set obj->write_domain to 0 on read path which was removed by the commit. References: https://gitlab.freedesktop.org/drm/intel/-/issues/6639 Fixes: 420a07b8 ("drm/i915: Individualize fences before adding to dma_resv obj") Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Cc: <stable@vger.kernel.org> # v5.16+ Cc: Matthew Auld <matthew.auld@intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907172641.12555-1-nirmoy.das@intel.com
-
Niranjana Vishwanathapura authored
So far, different views (normal, partial, rotated and remapped) into the same object are only supported for GGTT mappings. But with the upcoming VM_BIND feature, PPGTT will also use the partial view mapping. Hence rename ggtt_view to more generic gtt_view. Signed-off-by:
Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Acked-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Javier Martinez Canillas authored
The simple display pipeline is a set of helpers that can be used by DRM drivers to avoid dealing with all the needed components and just define a few functions to operate a simple display device with one full-screen scanout buffer feeding a single output. But it is arguable that this provides the correct level of abstraction for simple drivers, and recently some have been ported from using these simple display helpers to use the regular atomic helpers instead. The rationale for this is that the simple display pipeline helpers don't hide that much of the DRM complexity, while adding an indirection layer that conflates the concepts of CRTCs and planes. This makes the helpers less flexible and harder to be reused among different graphics drivers. Also, for simple drivers, using the full atomic helpers doesn't require a lot of additional code. So adding a simple display pipeline layer may not be worth it. For these reasons, let's follow that trend and make ssd130x a plain DRM driver that creates its own primary plane, CRTC, enconder and connector. Suggested-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Acked-by:
-
Tom St Denis authored
The TCC_DISABLE registers were not included in the 10.3 headers and instead just placed directly in the gfx_v10_0.c source. This patch adds them to the headers so tools like umr can scan them and support them. Signed-off-by:
-
Guchun Chen authored
It's missed in psp fini. Signed-off-by:
-
Yifan Zhang authored
current function mixes CSDMA_DOORBELL_RANGE and SDMA0_DOORBELL_RANGE range/size manipulation, while these 2 registers have difference size field mask. Remove range/size manipulation for SDMA0_DOORBELL_RANGE. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
Xiaojian Du <Xiaojian.Du@amd.com> Signed-off-by:
-
Yifan Zhang authored
Addresses should be printed in hex format. Signed-off-by:
-
zhang songyi authored
Return the enable_link_dp() directly instead of storing it in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
zhang songyi <zhang.songyi@zte.com.cn> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. Fix this up by properly calling dput(). Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: hersen wu <hersenxs.wu@amd.com> Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Thelford Williams <tdwilliamsiv@gmail.com> Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Cc: Yongzhi Liu <lyz_cs@pku.edu.cn> Cc: Mikita Lipski <mikita.lipski@amd.com> Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Evan Quan authored
Missing SetMGpuFanBoostLimitRpm mapping leads to loading failure for SMU 13.0.7. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
Chengming Gui authored
Add missing structure to avoid incorrect size and version check. Signed-off-by:
Chengming Gui <Jack.Gui@amd.com> Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
YiPeng Chai authored
V1: The psp_cmd_submit_buf function is called by psp_hw_fini to send TA unload messages to psp to terminate ras, asd and tmr. But when amdgpu is uninstalled, drm_dev_unplug is called earlier than psp_hw_fini in amdgpu_pci_remove, the calling order as follows: static void amdgpu_pci_remove(struct pci_dev *pdev) { drm_dev_unplug ...... amdgpu_driver_unload_kms->amdgpu_device_fini_hw->... ->.hw_fini->psp_hw_fini->... ->psp_ta_unload->psp_cmd_submit_buf ...... } The program will return when calling drm_dev_enter in psp_cmd_submit_buf. So the call to drm_dev_enter in psp_cmd_submit_buf should be removed, so that the TA unload messages can be sent to the psp when amdgpu is uninstalled. V2: 1. Restore psp_cmd_submit_buf to its original code. 2. Move drm_dev_unplug call after amdgpu_driver_unload_kms in amdgpu_pci_remove. 3. Since amdgpu_device_fini_hw is called by amdgpu_driver_unload_kms, remove the unplug check to release device mmio resource in amdgpu_device_fini_hw before calling drm_dev_unplug. Signed-off-by:YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by:
-
- 07 Sep, 2022 7 commits
-
-
John Harrison authored
With the move to un-versioned filenames, it becomes more difficult to know exactly what version of a given firmware is being used. So add the patch level version number to the debugfs output. Also, support matching by patch level when selecting code paths for firmware compatibility. While a patch level change cannot be backwards breaking, it is potentially possible that a new feature only works from a given patch level onwards (even though it was theoretically added in an earlier version that bumped the major or minor version). Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
John Harrison authored
There was a misunderstanding in how firmware file compatibility should be managed within i915. This has been clarified as: i915 must support all existing firmware releases forever new minor firmware releases should replace prior versions only backwards compatibility breaking releases should be a new file This patch cleans up the single fallback file support that was added as a quick fix emergency effort. That is now removed in preference to supporting arbitrary numbers of firmware files per platform. The patch also adds support for having GuC firmware files that are named by major version only (because the major version indicates backwards breaking changes that affect the KMD) and for having HuC firmware files with no version number at all (because the KMD has no interface requirements with the HuC). For GuC, the driver will report via dmesg if the found file is older than expected. For HuC, the KMD will no longer require updating for any new HuC release so will not be able to report what the latest expected version is. Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'for'. Signed-off-by:
Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907113927.35305-1-yuanjilin@cdjrlc.com
-
Zongmin Zhou authored
Details: Currently, when trying to suspend and resume with qxl device， there are some error messages after resuming, eventually caused to black screen and can't be recovered. The first error message: [ 64.668577][ C3] [drm] driver is in bug mode This error is due to guest qxl driver will call qxl_reinit_memslots(qdev) during system resume, but didn't call qxl_io_reset(qdev) before this, Then will cause the QXL_IO_MEMSLOT_ADD operation to fail on QEMU, qxl->guest_bug flag will be set，As a result, the QXL device can't communicate with guest qxl driver through the IO port. after fix the first error,can success to resume and login to desktop, but shortly after that will observe the second error message : [ 353.095343][ T863] qxl 0000:00:02.0: object_init failed for (262144, 0x00000001) [ 353.096660][ T863] [drm:qxl_gem_object_create [qxl]] *ERROR* Failed to allocate GEM object (260852, 1, 4096, -12) [ 353.097277][ T863] [drm:qxl_alloc_ioctl [qxl]] *ERROR* qxl_alloc_ioctl: failed to create gem ret=-12 [ 368.197538][ T863] qxl 0000:00:02.0: object_init failed for (3149824, 0x00000001) [ 368.197541][ T863] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate VRAM BO The problem is caused by calling qxl_ring_init_hdr(qdev->release_ring) in qxl_drm_resume() function. When do QXL_IO_RESET,QEMU will call init_qxl_ram(), so params like prod,cons,notify_on_cons and notify_on_prod will be set to default value. Ring push/pop actions for release_ring can be performed normally. But call qxl_ring_init_hdr(qdev->release_ring) will eventually set notify_on_prod to number of QXL_RELEASE_RING_SIZE, affect the value of notify in qxl_push_free_res() function always be false, QEMU will no longer send events of QXL_INTERRUPT_DISPLAY to the guest qxl driver，so qxl_ring_pop() will never been called anymore， and can't do dma_fence_signal(),result to ttm_bo_wait_ctx(bo, ctx) always return EBUSY,fail to call qxl_bo_create(). Test scenario: 1) start virtual machine with qemu command "-device qxl-vga" 2) click suspend botton to enter suspend mode 3) resume and observe the error message in kernel logs,screen will be black Let's fix this by reset io and remove the qxl_ring_init_hdr calling. Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn> Suggested-by: Ming Xie<xieming@kylinos.cn> Link: http://patchwork.freedesktop.org/patch/msgid/20220907094423.93581-1-min_halo@163.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Gerd Hoffmann authored
VGA_IS1_RC is the color mode register (VGA_IS1_RM the one for monochrome mode, note C vs. M at the end). So when using VGA_IS1_RC make sure the vga device is actually in color mode and set the corresponding bit in the misc register. Reproducible when booting VMs in UEFI mode with some edk2 versions (edk2 fix is on the way too). Doesn't happen in BIOS mode because in that case the vgabios already flips the bit. Fixes: 250e7439 ("drm/bochs: Add screen blanking support") Signed-off-by:
-
Chia-I Wu authored
Without this, the drm core advertises LINEAR modifier which is incorrect. Also userspace virgl does not support modifiers. For example, it causes chrome on ozone/drm to fail with "Failed to create scanout buffer". Fixes: 2af10429 ("drm: introduce fb_modifiers_not_supported flag in mode_config") Suggested-by:
Shao-Chuan Lee <shaochuan@chromium.org> Signed-off-by:
Chia-I Wu <olvaffe@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220831190601.1295129-1-olvaffe@gmail.comSigned-off-by:
-
Maxime Ripard authored
The reset line is deasserted at bind, and asserted if we ever encounter an error there. However, it's never asserted in unbind which will lead to a resource unbalance. Reviewed-by:
-
