- 18 Mar, 2013 26 commits
-
-
Mauro Carvalho Chehab authored
Prepare to register a separate bus for the second bus. For now, just add a new field. A latter patch will add the bits to make it work. This patch was generated by this script: perl -e 'while (<>) { if (s/EM2874_I2C_SECONDARY_BUS_SELECT.*\n//) { printf "\t\t.def_i2c_bus = 1,\n"; $found = 1; print $_ } else { if ($found) { s/^\s+// }; $found = 0; print $_; } }' \ drivers/media/usb/em28xx/em28xx-cards.c >a && mv a drivers/media/usb/em28xx/em28xx-cards.c Signed-off-by:Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Newer em28xx devices have 2 buses. Change the logic to allow using both buses. This patch was generated by this small script: for i in drivers/media/usb/em28xx/*.c; do sed 's,->i2c_adap,->i2c_adap[dev->def_i2c_bus],g;s,->i2c_client,->i2c_client[dev->def_i2c_bus],' done Of course, em28xx.h needed manual edit. Signed-off-by: -
Geert Uytterhoeven authored
m68k/sun3: drivers/media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_mmap’: drivers/media/v4l2-core/videobuf2-dma-contig.c:204: error: implicit declaration of function ‘dma_mmap_coherent’ drivers/media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_get_base_sgt’: drivers/media/v4l2-core/videobuf2-dma-contig.c:387: error: implicit declaration of function ‘dma_get_sgtable’ Make VIDEOBUF2_DMA_CONTIG and VIDEO_SH_VEU (which selects the former and doesn't have a platform dependency) depend on HAS_DMA to fix this. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Paul Bolle authored
Since commit 7543f344 ("[media] m920x: factor out a m920x_write_seq() function") building m920x.o triggers this GCC warning: drivers/media/usb/dvb-usb/m920x.c: In function ‘m920x_probe’: drivers/media/usb/dvb-usb/m920x.c:91:6: warning: ‘ret’ may be used uninitialized in this function [-Wuninitialized] This warning is caused by m920x_write_seq(), which is apparently inlined into m920x_probe(). It is clear why GCC thinks 'ret' may be used uninitialized. But in practice the first seq->address will always be non-zero when this function is called. That means we can change the while()-do{} loop into a do{}-while() loop. And that suffices to make GCC see that 'ret' will not be used uninitialized. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Cesar Eduardo Barros authored
Apparently a copy-paste mistake; the similar sh_vou.h exists, and both were added to MAINTAINERS by commit b618b69c ([media] MAINTAINERS: add entries for sh_veu and sh_vou V4L2 drivers). Signed-off-by:
Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by:
-
Cesar Eduardo Barros authored
That directory never existed. The intention was probably to match CARDLIST.saa7134 and README.saa7134. Signed-off-by:
-
Cesar Eduardo Barros authored
This file was moved to drivers/media/common/ by commit 62595820 ([media] cx2341x: move from media/i2c to media/common). Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Sachin Kamat authored
Some symbols are used only in this file. Make them static. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Sachin Kamat authored
Symbols used only in this file should be made static. Signed-off-by:
-
Sachin Kamat authored
These symbols are used only in this file and can be made static. Signed-off-by:
-
Sachin Kamat authored
Since these symbols are used only in this file, they can be made static. Signed-off-by:
-
Matt Gomboc authored
Thanks for the response, I have done as you suggested. Below is an updated patch for the OTG102 device against http://git.linuxtv.org/hverkuil/media_tree.git/shortlog/refs/heads/cx231xx, kernel version 3.8. With further testing it appears the extra clauses in cx231xx-cards.c were not necessary (in static in cx231xx_init_dev and static int cx231xx_usb_probe), so those have been also been removed. Signed-off-by:
Matt Gomboc <gomboc0@gmail.com> Acked-by:
-
Chen Gang authored
need using ccflags-y instead of EXTRA_CFLAGS can reference scripts/checkpatch.pl (1755..1766) when make EXTRA_CFLAGS=-W, the compiling issue will be occured. Signed-off-by:Chen Gang <gang.chen@asianux.com> Signed-off-by:
-
Eduardo Valentin authored
Add maintainer entry for the files composing si4713 FM transmitter driver. Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Syam Sidhardhan authored
kfree on NULL pointer is a no-op. Signed-off-by:
Syam Sidhardhan <s.syam@samsung.com> Signed-off-by:
-
Syam Sidhardhan authored
kfree on NULL pointer is a no-op. Signed-off-by:
-
Syam Sidhardhan authored
kfree on NULL pointer is a no-op. Signed-off-by:
-
Syam Sidhardhan authored
kfree on NULL pointer is a no-op. Signed-off-by:
-
Dmitry Torokhov authored
Even if bus is not hot-pluggable, the devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Similarly probe() methods should not be marked __init unless platform_driver_probe() is used. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
Timo Kokkonen <timo.t.kokkonen@iki.fi> Signed-off-by:
-
Antti Palosaari authored
I did what I liked to do. Also corrected two long log writings as checkpatch.pl was complaining about those. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
WARNING: at lib/dma-debug.c:947 check_for_stack+0xa7/0xf0() ehci-pci 0000:00:04.1: DMA-API: device driver maps memory fromstack Reported-by:
poma <pomidorabelisima@gmail.com> Signed-off-by:
-
Antti Palosaari authored
Implement: dvb_usbv2_generic_rw_locked() dvb_usbv2_generic_write_locked() Caller must hold device lock when locked versions are called. Signed-off-by:
-
Syam Sidhardhan authored
This patch fixes the print_buf leaking. Signed-off-by:
-
Syam Sidhardhan authored
Check for (adap == NULL) has to done before accessing adap. Signed-off-by:
-
- 14 Mar, 2013 7 commits
-
-
Ismael Luceno authored
Signed-off-by:
Ismael Luceno <ismael.luceno@corp.bluecherry.net> Signed-off-by:
-
Thiago Farina authored
Signed-off-by:
Thiago Farina <tfarina@chromium.org> Signed-off-by:
-
Igor M. Liplianin authored
Terratec Cinergy S2 USB HD Rev.2 support. This commit is a corrected cherry-pick of 03228792 which got reverted in b7e38636 because it was rebased incorrectly and introduced compilation errors. Signed-off-by:
Stephan Hilb <stephan@ecshi.net> Signed-off-by:
-
Alexey Khoroshilov authored
goto err and goto err_gateoff before mutex_lock(&state->internal->demod_lock) lead to unlock of unheld mutex in stv090x_sleep(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Manu Abraham <abraham.manu@gmail.com> Signed-off-by:
-
Sachin Kamat authored
Fixes the below warning: drivers/media/platform/timblogiw.c:81:31: warning: symbol 'timblogiw_tvnorms' was not declared. Should it be static? Signed-off-by:
-
Fabrizio Gazzato authored
This patch adds USB ID for alternative "Terratec Cinergy T Stick". Tested by a friend: works similarly to 0ccd:0093 version (af9035+tua9001) Signed-off-by:
Fabrizio Gazzato <fabrizio.gazzato@gmail.com> Acked-by:
-
Gianluca Gennari authored
This patch: http://git.linuxtv.org/media_tree.git/commit/b86d15440b683f8634c0cb26fc0861a5bc4913ac is missing a chunk when compared to an older version: https://patchwork.kernel.org/patch/2063281/ probably because of an unresolved merging conflict. This causes the following error: WARNING: "cx231xx_g_chip_ident" [/home/jena/media_build/v4l/cx231xx.ko] undefined! Signed-off-by:
Gianluca Gennari <gennarone@gmail.com> Signed-off-by:
-
- 05 Mar, 2013 7 commits
-
-
Frank Schaefer authored
Like init_bttv_i2c(), fini_bttv_i2c() belongs to bttv-i2c.c. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Frank Schaefer authored
Request module ir-kbd-i2c if an i2c ir decoder is detected. Tested with device "Hauppauge WinTV Theatre" (model 37284 rev B421). Signed-off-by:
-
Fabrizio Gazzato authored
Add USB ID for MaxMedia HU394-T USB DVB-T Multi (FM, DAB, DAB+) dongle (RTL2832U+FC0012) In Italy, is branded as "DIKOM USB-DVBT HD" lsusb: ID 1b80:d394 Afatech Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
The planar YUV422P is quite unusual and few if any applications support it. Instead choose the common YUYV format as the default. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
All fields after 'type' are already zeroed by the core framework. Clearing the full struct also clears 'type', which causes a wrong type value to be returned. Signed-off-by:
-
