1. 06 Jul, 2020 8 commits
  2. 22 Jun, 2020 2 commits
  3. 20 Jun, 2020 11 commits
  4. 16 Jun, 2020 2 commits
    • Drew Fustini's avatar
      pinctrl-single: fix pcs_parse_pinconf() return value · f46fe79f
      Drew Fustini authored
      This patch causes pcs_parse_pinconf() to return -ENOTSUPP when no
      pinctrl_map is added.  The current behavior is to return 0 when
      !PCS_HAS_PINCONF or !nconfs.  Thus pcs_parse_one_pinctrl_entry()
      incorrectly assumes that a map was added and sets num_maps = 2.
      
      Analysis:
      =========
      The function pcs_parse_one_pinctrl_entry() calls pcs_parse_pinconf()
      if PCS_HAS_PINCONF is enabled.  The function pcs_parse_pinconf()
      returns 0 to indicate there was no error and num_maps is then set to 2:
      
       980 static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs,
       981                                                 struct device_node *np,
       982                                                 struct pinctrl_map **map,
       983                                                 unsigned *num_maps,
       984                                                 const char **pgnames)
       985 {
      <snip>
      1053         (*map)->type = PIN_MAP_TYPE_MUX_GROUP;
      1054         (*map)->data.mux.group = np->name;
      1055         (*map)->data.mux.function = np->name;
      1056
      1057         if (PCS_HAS_PINCONF && function) {
      1058                 res = pcs_parse_pinconf(pcs, np, function, map);
      1059                 if (res)
      1060                         goto free_pingroups;
      1061                 *num_maps = 2;
      1062         } else {
      1063                 *num_maps = 1;
      1064         }
      
      However, pcs_parse_pinconf() will also return 0 if !PCS_HAS_PINCONF or
      !nconfs.  I believe these conditions should indicate that no map was
      added by returning -ENOTSUPP. Otherwise pcs_parse_one_pinctrl_entry()
      will set num_maps = 2 even though no maps were successfully added, as
      it does not reach "m++" on line 940:
      
       895 static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np,
       896                              struct pcs_function *func,
       897                              struct pinctrl_map **map)
       898
       899 {
       900         struct pinctrl_map *m = *map;
      <snip>
       917         /* If pinconf isn't supported, don't parse properties in below. */
       918         if (!PCS_HAS_PINCONF)
       919                 return 0;
       920
       921         /* cacluate how much properties are supported in current node */
       922         for (i = 0; i < ARRAY_SIZE(prop2); i++) {
       923                 if (of_find_property(np, prop2[i].name, NULL))
       924                         nconfs++;
       925         }
       926         for (i = 0; i < ARRAY_SIZE(prop4); i++) {
       927                 if (of_find_property(np, prop4[i].name, NULL))
       928                         nconfs++;
       929         }
       930         if (!nconfs)
       919                 return 0;
       932
       933         func->conf = devm_kcalloc(pcs->dev,
       934                                   nconfs, sizeof(struct pcs_conf_vals),
       935                                   GFP_KERNEL);
       936         if (!func->conf)
       937                 return -ENOMEM;
       938         func->nconfs = nconfs;
       939         conf = &(func->conf[0]);
       940         m++;
      
      This situtation will cause a boot failure [0] on the BeagleBone Black
      (AM3358) when am33xx_pinmux node in arch/arm/boot/dts/am33xx-l4.dtsi
      has compatible = "pinconf-single" instead of "pinctrl-single".
      
      The patch fixes this issue by returning -ENOSUPP when !PCS_HAS_PINCONF
      or !nconfs, so that pcs_parse_one_pinctrl_entry() will know that no
      map was added.
      
      Logic is also added to pcs_parse_one_pinctrl_entry() to distinguish
      between -ENOSUPP and other errors.  In the case of -ENOSUPP, num_maps
      is set to 1 as it is valid for pinconf to be enabled and a given pin
      group to not any pinconf properties.
      
      [0] https://lore.kernel.org/linux-omap/20200529175544.GA3766151@x1/
      
      Fixes: 9dddb4df ("pinctrl: single: support generic pinconf")
      Signed-off-by: default avatarDrew Fustini <drew@beagleboard.org>
      Acked-by: default avatarTony Lindgren <tony@atomide.com>
      Link: https://lore.kernel.org/r/20200608125143.GA2789203@x1Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      f46fe79f
    • Paul Cercueil's avatar
      pinctrl: ingenic: Add NAND FRE/FWE pins for JZ4740 · bcad94d7
      Paul Cercueil authored
      Add the FRE/FWE pins for the JZ4740.
      
      These pins must be in function #0 for the NAND to work. The reason it
      worked before was because the bootloader did set these pins to the
      correct function beforehand.
      Signed-off-by: default avatarPaul Cercueil <paul@crapouillou.net>
      Link: https://lore.kernel.org/r/20200607174243.2361664-1-paul@crapouillou.netSigned-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      bcad94d7
  5. 14 Jun, 2020 4 commits
    • Linus Torvalds's avatar
      Linux 5.8-rc1 · b3a9e3b9
      Linus Torvalds authored
      b3a9e3b9
    • Linus Torvalds's avatar
      Merge tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux · 4a87b197
      Linus Torvalds authored
      Pull SafeSetID update from Micah Morton:
       "Add additional LSM hooks for SafeSetID
      
        SafeSetID is capable of making allow/deny decisions for set*uid calls
        on a system, and we want to add similar functionality for set*gid
        calls.
      
        The work to do that is not yet complete, so probably won't make it in
        for v5.8, but we are looking to get this simple patch in for v5.8
        since we have it ready.
      
        We are planning on the rest of the work for extending the SafeSetID
        LSM being merged during the v5.9 merge window"
      
      * tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux:
        security: Add LSM hooks to set*gid syscalls
      4a87b197
    • Thomas Cedeno's avatar
      security: Add LSM hooks to set*gid syscalls · 39030e13
      Thomas Cedeno authored
      The SafeSetID LSM uses the security_task_fix_setuid hook to filter
      set*uid() syscalls according to its configured security policy. In
      preparation for adding analagous support in the LSM for set*gid()
      syscalls, we add the requisite hook here. Tested by putting print
      statements in the security_task_fix_setgid hook and seeing them get hit
      during kernel boot.
      Signed-off-by: default avatarThomas Cedeno <thomascedeno@google.com>
      Signed-off-by: default avatarMicah Morton <mortonm@chromium.org>
      39030e13
    • Linus Torvalds's avatar
      Merge tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux · 9d645db8
      Linus Torvalds authored
      Pull btrfs updates from David Sterba:
       "This reverts the direct io port to iomap infrastructure of btrfs
        merged in the first pull request. We found problems in invalidate page
        that don't seem to be fixable as regressions or without changing iomap
        code that would not affect other filesystems.
      
        There are four reverts in total, but three of them are followup
        cleanups needed to revert a43a67a2 cleanly. The result is the
        buffer head based implementation of direct io.
      
        Reverts are not great, but under current circumstances I don't see
        better options"
      
      * tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
        Revert "btrfs: switch to iomap_dio_rw() for dio"
        Revert "fs: remove dio_end_io()"
        Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK"
        Revert "btrfs: split btrfs_direct_IO to read and write part"
      9d645db8
  6. 13 Jun, 2020 13 commits
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 96144c58
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Fix cfg80211 deadlock, from Johannes Berg.
      
       2) RXRPC fails to send norigications, from David Howells.
      
       3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
          Geliang Tang.
      
       4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.
      
       5) The ucc_geth driver needs __netdev_watchdog_up exported, from
          Valentin Longchamp.
      
       6) Fix hashtable memory leak in dccp, from Wang Hai.
      
       7) Fix how nexthops are marked as FDB nexthops, from David Ahern.
      
       8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.
      
       9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.
      
      10) Fix link speed reporting in iavf driver, from Brett Creeley.
      
      11) When a channel is used for XSK and then reused again later for XSK,
          we forget to clear out the relevant data structures in mlx5 which
          causes all kinds of problems. Fix from Maxim Mikityanskiy.
      
      12) Fix memory leak in genetlink, from Cong Wang.
      
      13) Disallow sockmap attachments to UDP sockets, it simply won't work.
          From Lorenz Bauer.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
        net: ethernet: ti: ale: fix allmulti for nu type ale
        net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
        net: atm: Remove the error message according to the atomic context
        bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
        libbpf: Support pre-initializing .bss global variables
        tools/bpftool: Fix skeleton codegen
        bpf: Fix memlock accounting for sock_hash
        bpf: sockmap: Don't attach programs to UDP sockets
        bpf: tcp: Recv() should return 0 when the peer socket is closed
        ibmvnic: Flush existing work items before device removal
        genetlink: clean up family attributes allocations
        net: ipa: header pad field only valid for AP->modem endpoint
        net: ipa: program upper nibbles of sequencer type
        net: ipa: fix modem LAN RX endpoint id
        net: ipa: program metadata mask differently
        ionic: add pcie_print_link_status
        rxrpc: Fix race between incoming ACK parser and retransmitter
        net/mlx5: E-Switch, Fix some error pointer dereferences
        net/mlx5: Don't fail driver on failure to create debugfs
        net/mlx5e: CT: Fix ipv6 nat header rewrite actions
        ...
      96144c58
    • David Sterba's avatar
      Revert "btrfs: switch to iomap_dio_rw() for dio" · 55e20bd1
      David Sterba authored
      This reverts commit a43a67a2.
      
      This patch reverts the main part of switching direct io implementation
      to iomap infrastructure. There's a problem in invalidate page that
      couldn't be solved as regression in this development cycle.
      
      The problem occurs when buffered and direct io are mixed, and the ranges
      overlap. Although this is not recommended, filesystems implement
      measures or fallbacks to make it somehow work. In this case, fallback to
      buffered IO would be an option for btrfs (this already happens when
      direct io is done on compressed data), but the change would be needed in
      the iomap code, bringing new semantics to other filesystems.
      
      Another problem arises when again the buffered and direct ios are mixed,
      invalidation fails, then -EIO is set on the mapping and fsync will fail,
      though there's no real error.
      
      There have been discussions how to fix that, but revert seems to be the
      least intrusive option.
      
      Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      55e20bd1
    • Grygorii Strashko's avatar
      net: ethernet: ti: ale: fix allmulti for nu type ale · bc139119
      Grygorii Strashko authored
      On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow
      unregistered mcast packets to pass.
      
      This happens, because ALE VLAN entries on these SoCs do not contain port
      masks for reg/unreg mcast packets, but instead store indexes of
      ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for
      reg/unreg mcast packets.
      This path was missed by commit 9d1f6447 ("net: ethernet: ti: ale: fix
      seeing unreg mcast packets with promisc and allmulti disabled").
      
      Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti().
      
      Fixes: 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled")
      Signed-off-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bc139119
    • Grygorii Strashko's avatar
      net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init · 2074f9ea
      Grygorii Strashko authored
      The ALE parameters structure is created on stack, so it has to be reset
      before passing to cpsw_ale_create() to avoid garbage values.
      
      Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
      Signed-off-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2074f9ea
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf · fa7566a0
      David S. Miller authored
      Alexei Starovoitov says:
      
      ====================
      pull-request: bpf 2020-06-12
      
      The following pull-request contains BPF updates for your *net* tree.
      
      We've added 26 non-merge commits during the last 10 day(s) which contain
      a total of 27 files changed, 348 insertions(+), 93 deletions(-).
      
      The main changes are:
      
      1) sock_hash accounting fix, from Andrey.
      
      2) libbpf fix and probe_mem sanitizing, from Andrii.
      
      3) sock_hash fixes, from Jakub.
      
      4) devmap_val fix, from Jesper.
      
      5) load_bytes_relative fix, from YiFei.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fa7566a0
    • Liao Pingfang's avatar
      net: atm: Remove the error message according to the atomic context · bf97bac9
      Liao Pingfang authored
      Looking into the context (atomic!) and the error message should be dropped.
      Signed-off-by: default avatarLiao Pingfang <liao.pingfang@zte.com.cn>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bf97bac9
    • Linus Torvalds's avatar
      Merge tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6 · f82e7b57
      Linus Torvalds authored
      Pull more cifs updates from Steve French:
       "12 cifs/smb3 fixes, 2 for stable.
      
         - add support for idsfromsid on create and chgrp/chown allowing
           ability to save owner information more naturally for some workloads
      
         - improve query info (getattr) when SMB3.1.1 posix extensions are
           negotiated by using new query info level"
      
      * tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
        smb3: Add debug message for new file creation with idsfromsid mount option
        cifs: fix chown and chgrp when idsfromsid mount option enabled
        smb3: allow uid and gid owners to be set on create with idsfromsid mount option
        smb311: Add tracepoints for new compound posix query info
        smb311: add support for using info level for posix extensions query
        smb311: Add support for lookup with posix extensions query info
        smb311: Add support for SMB311 query info (non-compounded)
        SMB311: Add support for query info using posix extensions (level 100)
        smb3: add indatalen that can be a non-zero value to calculation of credit charge in smb2 ioctl
        smb3: fix typo in mount options displayed in /proc/mounts
        cifs: Add get_security_type_str function to return sec type.
        smb3: extend fscache mount volume coherency check
      f82e7b57
    • Linus Torvalds's avatar
      binderfs: add gitignore for generated sample program · 4f9b3a37
      Linus Torvalds authored
      Let's keep "git status" happy and quiet.
      
      Fixes: 9762dc14 ("samples: add binderfs sample program
      Fixes: fca5e949 ("samples: binderfs: really compile this sample and fix build issues")
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      4f9b3a37
    • Linus Torvalds's avatar
      doc: don't use deprecated "---help---" markers in target docs · 3e1ad405
      Linus Torvalds authored
      I'm not convinced the script makes useful automaed help lines anyway,
      but since we're trying to deprecate the use of "---help---" in Kconfig
      files, let's fix the doc example code too.
      
      See commit a7f7f624 ("treewide: replace '---help---' in Kconfig
      files with 'help'")
      
      Cc: Masahiro Yamada <masahiroy@kernel.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3e1ad405
    • Linus Torvalds's avatar
      Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild · 6adc19fd
      Linus Torvalds authored
      Pull more Kbuild updates from Masahiro Yamada:
      
       - fix build rules in binderfs sample
      
       - fix build errors when Kbuild recurses to the top Makefile
      
       - covert '---help---' in Kconfig to 'help'
      
      * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
        treewide: replace '---help---' in Kconfig files with 'help'
        kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
        samples: binderfs: really compile this sample and fix build issues
      6adc19fd
    • Linus Torvalds's avatar
      Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · 3df83e16
      Linus Torvalds authored
      Pull more SCSI updates from James Bottomley:
       "This is the set of changes collected since just before the merge
        window opened. It's mostly minor fixes in drivers.
      
        The one non-driver set is the three optical disk (sr) changes where
        two are error path fixes and one is a helper conversion.
      
        The big driver change is the hpsa compat_alloc_userspace rework by Al
        so he can kill the remaining user. This has been tested and acked by
        the maintainer"
      
      * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
        scsi: acornscsi: Fix an error handling path in acornscsi_probe()
        scsi: storvsc: Remove memset before memory freeing in storvsc_suspend()
        scsi: cxlflash: Remove an unnecessary NULL check
        scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM
        scsi: sr: Fix sr_probe() missing deallocate of device minor
        scsi: sr: Fix sr_probe() missing mutex_destroy
        scsi: st: Convert convert get_user_pages() --> pin_user_pages()
        scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb()
        scsi: target: Fix NULL pointer dereference
        scsi: target: Initialize LUN in transport_init_se_cmd()
        scsi: target: Factor out a new helper, target_cmd_init_cdb()
        scsi: hpsa: hpsa_ioctl(): Tidy up a bit
        scsi: hpsa: Get rid of compat_alloc_user_space()
        scsi: hpsa: Don't bother with vmalloc for BIG_IOCTL_Command_struct
        scsi: hpsa: Lift {BIG_,}IOCTL_Command_struct copy{in,out} into hpsa_ioctl()
        scsi: ufs: Remove redundant urgent_bkop_lvl initialization
        scsi: ufs: Don't update urgent bkops level when toggling auto bkops
        scsi: qedf: Remove redundant initialization of variable rc
        scsi: mpt3sas: Fix memset() in non-RDPQ mode
        scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj
        ...
      3df83e16
    • Linus Torvalds's avatar
      Merge branch 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux · 91fa5884
      Linus Torvalds authored
      Pull i2c updates from Wolfram Sang:
       "I2C has quite some patches for you this time. I hope it is the move to
        per-driver-maintainers which is now showing results. We will see.
      
        The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI),
        larger refactoring of the Designware, Tegra, and PXA drivers, the
        Cadence driver supports being a slave now, and there is support to
        instanciate SPD eeproms for well-known cases (which will be
        user-visible because the i801 driver supports it), and some
        devm_platform_ioremap_resource() conversions which blow up the
        diffstat.
      
        Note that I applied the Nuvoton driver quite late, so some minor fixup
        patches arrived during the merge window. I chose to apply them right
        away because they were trivial"
      
      * 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits)
        i2c: Drop stray comma in MODULE_AUTHOR statements
        i2c: npcm7xx: npcm_i2caddr[] can be static
        MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC
        i2c: npcm7xx: Fix a couple of error codes in probe
        i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n
        i2c: npcm7xx: Remove unnecessary parentheses
        i2c: npcm7xx: Add support for slave mode for Nuvoton
        i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver
        dt-bindings: i2c: npcm7xx: add NPCM I2C controller
        i2c: pxa: don't error out if there's no pinctrl
        i2c: add 'single-master' property to generic bindings
        i2c: designware: Add Baikal-T1 System I2C support
        i2c: designware: Move reg-space remapping into a dedicated function
        i2c: designware: Retrieve quirk flags as early as possible
        i2c: designware: Convert driver to using regmap API
        i2c: designware: Discard Cherry Trail model flag
        i2c: designware: Add Baytrail sem config DW I2C platform dependency
        i2c: designware: slave: Set DW I2C core module dependency
        i2c: designware: Use `-y` to build multi-object modules
        dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller
        ...
      91fa5884
    • Linus Torvalds's avatar
      Merge tag 'media/v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media · ac911b31
      Linus Torvalds authored
      Pull more media updates from Mauro Carvalho Chehab:
      
       - a set of atomisp patches. They remove several abstraction layers, and
         fixes clang and gcc warnings (that were hidden via some macros that
         were disabling 4 or 5 types of warnings there). There are also some
         important fixes and sensor auto-detection on newer BIOSes via ACPI
         _DCM tables.
      
       - some fixes
      
      * tag 'media/v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (95 commits)
        media: rkvdec: Fix H264 scaling list order
        media: v4l2-ctrls: Unset correct HEVC loop filter flag
        media: videobuf2-dma-contig: fix bad kfree in vb2_dma_contig_clear_max_seg_size
        media: v4l2-subdev.rst: correct information about v4l2 events
        media: s5p-mfc: Properly handle dma_parms for the allocated devices
        media: medium: cec: Make MEDIA_CEC_SUPPORT default to n if !MEDIA_SUPPORT
        media: cedrus: Implement runtime PM
        media: cedrus: Program output format during each run
        media: atomisp: improve ACPI/DMI detection logs
        media: Revert "media: atomisp: add Asus Transform T101HA ACPI vars"
        media: Revert "media: atomisp: Add some ACPI detection info"
        media: atomisp: improve sensor detection code to use _DSM table
        media: atomisp: get rid of an iomem abstraction layer
        media: atomisp: get rid of a string_support.h abstraction layer
        media: atomisp: use strscpy() instead of less secure variants
        media: atomisp: set DFS to MAX if sensor doesn't report fps
        media: atomisp: use different dfs failed messages
        media: atomisp: change the detection of ISP2401 at runtime
        media: atomisp: use macros from intel-family.h
        media: atomisp: don't set hpll_freq twice with different values
        ...
      ac911b31