- 15 May, 2023 27 commits
-
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230512212725.143824-11-u.kleine-koenig@pengutronix.deSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Pavel Pisa <pisa@cmp.felk.cvut.cz> Link: https://lore.kernel.org/r/20230512212725.143824-7-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230512212725.143824-2-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
Include the headers that "can/length.h" depends on. Fixes: bdd2e413 ("can: dev: move length related code into seperate file") Link: https://lore.kernel.org/all/20230509122854.350426-1-mkl@pengutronix.deSigned-off-by:
-
Jiapeng Chong authored
The print function dev_err() is redundant because platform_get_irq_byname() already prints an error. ./drivers/net/can/bxcan.c:970:2-9: line 970 is redundant because platform_get_irq() already prints an error. ./drivers/net/can/bxcan.c:964:2-9: line 964 is redundant because platform_get_irq() already prints an error. ./drivers/net/can/bxcan.c:958:2-9: line 958 is redundant because platform_get_irq() already prints an error. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4878Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/all/20230506080725.68401-1-jiapeng.chong@linux.alibaba.comSigned-off-by:
-
Ji-Ze Hong authored
This patch adds support for Fintek USB to 2CAN controller. Changelog: v7: https://lore.kernel.org/all/20230509073821.25289-1-peter_hong@fintek.com.tw 1. Fix consistency of coding style for "break" in f81604_register_urbs(). 2. Remove goto statement in f81604_open(). v6: https://lore.kernel.org/all/20230505022317.22417-1-peter_hong@fintek.com.tw 1. Remove non-used define and change constant mask to GENMASK(). 2. Move some variables declaration from function start to block start. 3. Move some variables initization into declaration. 4. Change variable "id" in f81604_start_xmit() only for CAN ID usage. v5: https://lore.kernel.org/all/20230420024403.13830-1-peter_hong@fintek.com.tw 1. Change all u8 *buff to struct f81604_int_data/f81604_can_frame. 2. Change all netdev->dev_id to netdev->dev_port. 3. Remove over design for f81604_process_rx_packet(). This device only report a frame at once, so the f81604_process_rx_packet() are reduced to process 1 frame. v4: https://lore.kernel.org/all/20230413084253.1524-1-peter_hong@fintek.com.tw 1. Remove f81604_prepare_urbs/f81604_remove_urbs() and alloc URB/buffer dynamically in f81604_register_urbs(), using "urbs_anchor" for manage all rx/int URBs. 2. Add F81604 to MAINTAINERS list. 3. Change handle_clear_reg_work/handle_clear_overrun_work to single clear_reg_work and using bitwise "clear_flags" to record it. 4. Move __f81604_set_termination in front of f81604_probe() to avoid rarely racing condition. 5. Add __aligned to struct f81604_int_data / f81604_sff / f81604_eff. 6. Add aligned operations in f81604_start_xmit/f81604_process_rx_packet(). 7. Change lots of CANBUS functions first parameter from struct usb_device* to struct f81604_port_priv *priv. But remain f81604_write / f81604_read / f81604_update_bits() as struct usb_device* for __f81604_set_termination() in probe() stage. 8. Simplify f81604_read_int_callback() and separate into f81604_handle_tx / f81604_handle_can_bus_errors() functions. v3: https://lore.kernel.org/all/20230327051048.11589-1-peter_hong@fintek.com.tw 1. Change CAN clock to using MEGA units. 2. Remove USB set/get retry, only remain SJA1000 reset/operation retry. 3. Fix all numberic constant to define. 4. Add terminator control. (only 0 & 120 ohm) 5. Using struct data to represent INT/TX/RX endpoints data instead byte arrays. 6. Error message reports changed from %d to %pe for mnemotechnic values. 7. Some bit operations are changed to FIELD_PREP(). 8. Separate TX functions from f81604_read_int_callback(). 9. cf->can_id |= CAN_ERR_CNT in f81604_read_int_callback to report valid TX/RX error counts. 10. Move f81604_prepare_urbs/f81604_remove_urbs() from CAN open/close() to USB probe/disconnect(). 11. coding style refactoring. v2: https://lore.kernel.org/all/20230321081152.26510-1-peter_hong@fintek.com.tw 1. coding style refactoring. 2. some const number are defined to describe itself. 3. fix wrong usage for can_get_echo_skb() in f81604_write_bulk_callback(). v1: https://lore.kernel.org/all/20230317093352.3979-1-peter_hong@fintek.com.twSigned-off-by:
Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw> Reviewed-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230509073821.25289-1-peter_hong@fintek.com.tw [mkl: add changelog, fix printf format] Signed-off-by:
-
Krzysztof Kozlowski authored
If sock->service_name is NULL, the local variable service_name_tlv_length will not be assigned by nfc_llcp_build_tlv(), later leading to using value frmo the stack. Smatch warning: net/nfc/llcp_commands.c:442 nfc_llcp_send_connect() error: uninitialized symbol 'service_name_tlv_length'. Fixes: de9e5aeb ("NFC: llcp: Fix usage of llcp_add_tlv()") Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yang Li authored
./drivers/net/ethernet/marvell/octeontx2/nic/cn10k_macsec.c:242:2-3: Unneeded semicolon ./drivers/net/ethernet/marvell/octeontx2/nic/cn10k_macsec.c:476:2-3: Unneeded semicolon Reported-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Anup Sharma authored
Remove the extra semicolon at end. Issue identified using semicolon.cocci Coccinelle semantic patch. drivers/net/ethernet/microchip/vcap/vcap_api.c:1124:3-4: Unneeded semicolon drivers/net/ethernet/microchip/vcap/vcap_api.c:1165:3-4: Unneeded semicolon drivers/net/ethernet/microchip/vcap/vcap_api.c:1239:3-4: Unneeded semicolon drivers/net/ethernet/microchip/vcap/vcap_api.c:1287:3-4: Unneeded semicolon Signed-off-by:
Anup Sharma <anupnewsmail@gmail.com> Changes: V1 -> V2: Target tree included in the subject line. Signed-off-by:
-
David S. Miller authored
Hariprasad Kelam says: ==================== octeontx2-pf: HTB offload support octeontx2 silicon and CN10K transmit interface consists of five transmit levels starting from MDQ, TL4 to TL1. Once packets are submitted to MDQ, hardware picks all active MDQs using strict priority, and MDQs having the same priority level are chosen using round robin. Each packet will traverse MDQ, TL4 to TL1 levels. Each level contains an array of queues to support scheduling and shaping. As HTB supports classful queuing mechanism by supporting rate and ceil and allow the user to control the absolute bandwidth to particular classes of traffic the same can be achieved by configuring shapers and schedulers on different transmit levels. This series of patches adds support for HTB offload, Patch1: Allow strict priority parameter in HTB offload mode. Patch2: Rename existing total tx queues for better readability Patch3: defines APIs such that the driver can dynamically initialize/ deinitialize the send queues. Patch4: Refactors transmit alloc/free calls as preparation for QOS offload code. Patch5: moves rate limiting logic to common header which will be used by qos offload code. Patch6: Adds actual HTB offload support. Patch7: exposes qos send queue stats over ethtool. Patch8: Add documentation about htb offload flow in driver ==================== Signed-off-by: -
Hariprasad Kelam authored
Add QOS example configuration along with tc-htb commands Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Reviewed-by:
-
Hariprasad Kelam authored
This patch extends ethtool stats support for QoS send queues as well. upon the number of transmit channels change request, Ensures the real number of transmit queues are equal to active QoS send queues plus configured transmit queues. ethtool -S eth0 txq_qos0: bytes: 3021391800 txq_qos0: frames: 1998275 txq_qos1: bytes: 4619766312 txq_qos1: frames: 3055401 ... ... Signed-off-by:Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
-
Naveen Mamindlapalli authored
This patch registers callbacks to support HTB offload. Below are features supported, - supports traffic shaping on the given class by honoring rate and ceil configuration. - supports traffic scheduling, which prioritizes different types of traffic based on strict priority values. - supports the creation of leaf to inner classes such that parent node rate limits apply to all child nodes. Signed-off-by:
Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by:
-
Hariprasad Kelam authored
This patch moves rate limiting definitions to a common header file and adds csr definitions required for QOS code. Signed-off-by:
-
Hariprasad Kelam authored
1. Upon txschq free request, the transmit schedular config in hardware is not getting reset. This patch adds necessary changes to do the same. 2. Current implementation calls txschq alloc during interface initialization and in response handler updates the default txschq array. This creates a problem for htb offload where txsch alloc will be called for every tc class. This patch addresses the issue by reading txschq response in mbox caller function instead in the response handler. 3. Current otx2_txschq_stop routine tries to free all txschq nodes allocated to the interface. This creates a problem for htb offload. This patch introduces the otx2_txschq_free_one to free txschq in a given level. Signed-off-by:
-
Subbaraya Sundeep authored
Current implementation is such that the number of Send queues (SQs) are decided on the device probe which is equal to the number of online cpus. These SQs are allocated and deallocated in interface open and c lose calls respectively. This patch defines new APIs for initializing and deinitializing Send queues dynamically and allocates more number of transmit queues for QOS feature. Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
Hariprasad Kelam authored
current implementation is such that tot_tx_queues contains both xdp queues and normal tx queues. which will be allocated in interface open calls and deallocated on interface down calls respectively. With addition of QOS, where send quees are allocated/deallacated upon user request Qos send queues won't be part of tot_tx_queues. So this patch renames tot_tx_queues to non_qos_queues. Signed-off-by:
-
Naveen Mamindlapalli authored
The current implementation of HTB offload returns the EINVAL error for unsupported parameters like prio and quantum. This patch removes the error returning checks for 'prio' parameter and populates its value to tc_htb_qopt_offload structure such that driver can use the same. Add prio parameter check in mlx5 driver, as mlx5 devices are not capable of supporting the prio parameter when htb offload is used. Report error if prio parameter is set to a non-default value. Signed-off-by:
Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by:
-
Angus Chen authored
As low_thresh has no work in fragment reassembles,del it. And Mark it deprecated in sysctl Document. Signed-off-by:
Angus Chen <angus.chen@jaguarmicro.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-next-2023-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle valo says: ==================== wireless-next patches for v6.5 The first pull request for v6.5 and only driver changes this time. rtl8xxxu has been making lots of progress lately and now has AP mode support. Major changes: rtl8xxxu * AP mode support, initially only for rtl8188f rtw89 * provide RSSI, EVN and SNR statistics via debugfs * support U-NII-4 channels on 5 GHz band ==================== Signed-off-by:
-
- 13 May, 2023 13 commits
-
-
Edward Cree authored
When writing error messages to extack for pseudo collisions, we can't use encap->type as encap has already been freed. Fortunately the same value is stored in local variable em_type, so use that instead. Fixes: 3c9561c0 ("sfc: support TC decap rules matching on enc_ip_tos") Reported-by:
Edward Cree <ecree.xilinx@gmail.com> Reviewed-by:
-
Russell King (Oracle) authored
Both phylink_create() and phylink_fwnode_phy_connect() do not modify the fwnode argument that they are passed, so lets constify these. Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Shenwei Wang authored
This patch standardizes the inconsistent return values for unsuccessful XDP transmits by using standardized error codes (-EBUSY or -ENOMEM). Signed-off-by:
Shenwei Wang <shenwei.wang@nxp.com> Reviewed-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
-
Daire McNamara authored
On mpfs, with SRAM configured for 4 queues, setting max_tx_len to GEM_TX_MAX_LEN=0x3f0 results multiple AMBA errors. Setting max_tx_len to (4KiB - 56) removes those errors. The details are described in erratum 1686 by Cadence The max jumbo frame size is also reduced for mpfs to (4KiB - 56). Signed-off-by:
Daire McNamara <daire.mcnamara@microchip.com> Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
-
Kuniyuki Iwashima authored
Since introduced in commit c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind"), ping socket does not use SLAB_TYPESAFE_BY_RCU nor check nulls marker in loops. Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
-
David S. Miller authored
Yunsheng Lin says: ==================== net: introduce skb_frag_fill_page_desc() Most users use __skb_frag_set_page()/skb_frag_off_set()/ skb_frag_size_set() to fill the page desc for a skb frag. It does not make much sense to calling __skb_frag_set_page() without calling skb_frag_off_set(), as the offset may depend on whether the page is head page or tail page, so add skb_frag_fill_page_desc() to fill the page desc for a skb frag. In the future, we can make sure the page in the frag is head page of compound page or a base page, if not, we may warn about that and convert the tail page to head page and update the offset accordingly, if we see a warning about that, we also fix the caller to fill the head page in the frag. when the fixing is done, we may remove the warning and converting. In this way, we can remove the compound_head() or use page_ref_*() like the below case: https://elixir.bootlin.com/linux/latest/source/net/core/page_pool.c#L881 https://elixir.bootlin.com/linux/latest/source/include/linux/skbuff.h#L3383 It may also convert net stack to use the folio easier. V1: repost with all the ack/review tags included. RFC: remove a local variable as pointed out by Simon. ==================== Signed-off-by:
-
Yunsheng Lin authored
The remaining users calling __skb_frag_set_page() with page being NULL seems to be doing defensive programming, as shinfo->nr_frags is already decremented, so remove them. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by:
-
Yunsheng Lin authored
Most users use __skb_frag_set_page()/skb_frag_off_set()/ skb_frag_size_set() to fill the page desc for a skb frag. Introduce skb_frag_fill_page_desc() to do that. net/bpf/test_run.c does not call skb_frag_off_set() to set the offset, "copy_from_user(page_address(page), ...)" and 'shinfo' being part of the 'data' kzalloced in bpf_test_init() suggest that it is assuming offset to be initialized as zero, so call skb_frag_fill_page_desc() with offset being zero for this case. Also, skb_frag_set_page() is not used anymore, so remove it. Signed-off-by:
-
Vladimir Nikishkin authored
Add test to make sure that the localbypass option is on by default. Add test to change vxlan localbypass to nolocalbypass and check that packets are delivered to userspace. Signed-off-by:
Vladimir Nikishkin <vladimir@nikishkin.pw> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Vladimir Nikishkin authored
If a packet needs to be encapsulated towards a local destination IP, the packet will undergo a "local bypass" and be injected into the Rx path as if it was received by the target VXLAN device without undergoing encapsulation. If such a device does not exist, the packet will be dropped. There are scenarios where we do not want to perform such a bypass, but instead want the packet to be encapsulated and locally received by a user space program for post-processing. To that end, add a new VXLAN device attribute that controls whether a "local bypass" is performed or not. Default to performing a bypass to maintain existing behavior. Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== Support for Wake-on-LAN for Broadcom PHYs This patch series adds support for Wake-on-LAN to the Broadcom PHY driver. Specifically the BCM54210E/B50212E are capable of supporting Wake-on-LAN using an external pin typically wired up to a system's GPIO. These PHY operate a programmable Ethernet MAC destination address comparator which will fire up an interrupt whenever a match is received. Because of that, it was necessary to introduce patch #1 which allows the PHY driver's ->suspend() routine to be called unconditionally. This is necessary in our case because we need a hook point into the device suspend/resume flow to enable the wake-up interrupt as late as possible. Patch #2 adds support for the Broadcom PHY library and driver for Wake-on-LAN proper with the WAKE_UCAST, WAKE_MCAST, WAKE_BCAST, WAKE_MAGIC and WAKE_MAGICSECURE. Note that WAKE_FILTER is supportable, however this will require further discussions and be submitted as a RFC series later on. Patch #3 updates the GENET driver to defer to the PHY for Wake-on-LAN if the PHY supports it, thus allowing the MAC to be powered down to conserve power. Changes in v3: - collected Reviewed-by tags - explicitly use return 0 in bcm54xx_phy_probe() (Paolo) Changes in v2: - introduce PHY_ALWAYS_CALL_SUSPEND and only have the Broadcom PHY driver set this flag to minimize changes to the suspend flow to only drivers that need it - corrected possibly uninitialized variable in bcm54xx_set_wakeup_irq (Simon) ==================== Signed-off-by: -
Florian Fainelli authored
If available, interrogate the PHY to find out whether we can use it for Wake-on-LAN. This can be a more power efficient way of implementing that feature, especially when the MAC is powered off in low power states. Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Add support for WAKE_UCAST, WAKE_MCAST, WAKE_BCAST, WAKE_MAGIC and WAKE_MAGICSECURE. This is only supported with the BCM54210E and compatible Ethernet PHYs. Using the in-band interrupt or an out of band GPIO interrupts are supported. Broadcom PHYs will generate a Wake-on-LAN level low interrupt on LED4 as soon as one of the supported patterns is being matched. That includes generating such an interrupt even if the PHY is operated during normal modes. If WAKE_UCAST is selected, this could lead to the LED4 interrupt firing up for every packet being received which is absolutely undesirable from a performance point of view. Because the Wake-on-LAN configuration can be set long before the system is actually put to sleep, we cannot have an interrupt service routine to clear on read the interrupt status register and ensure that new packet matches will be detected. It is desirable to enable the Wake-on-LAN interrupt as late as possible during the system suspend process such that we limit the number of interrupts to be handled by the system, but also conversely feed into the Linux's system suspend way of dealing with interrupts in and around the points of no return. Reviewed-by:
-
