- 26 Apr, 2018 9 commits
-
-
Jani Nikula authored
For now, there's just the one link config selection, optimizing for slow and wide link. No functional changes. Keep the debug logging in the caller, to avoid duplication later on if alternative link confing selection gets added. v2: Improved commit message Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/64848b76bf90d6ceecd7ec6b5add28531e0b1a41.1524730974.git.jani.nikula@intel.com
-
Jani Nikula authored
Also use same min/max model for bpp, and adjust debug logging while at it. Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/72f78c7ae0cd1810798bd94cbf5e574c78da83f8.1524730974.git.jani.nikula@intel.com
-
Jani Nikula authored
Keep related things together. No functional changes. v2: Fix a typo in patch subject, fix a checkpatch alignment warning. Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f24d44547a586a0e342f24e69ab4d576a2474891.1524730974.git.jani.nikula@intel.com
-
Jani Nikula authored
Abstract a new intel_dp_compute_link_config() from intel_dp_compute_config(), with the parts related to link configuration, i.e. bpp, link rate, and lane count selection. No functional changes. v2: Fix a checkpatch warn about spacing. Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/80f99a625633f87f44d38d487ba3b32ff9a26b07.1524730974.git.jani.nikula@intel.com
-
Jani Nikula authored
We call intel_dp_compute_rate() in intel_dp_compute_config() only to be able to debug log the link_bw and rate_select parameters; we don't use the parameters here for anything else. We call intel_dp_compute_rate() again during link training where we actually need and use the parameters. Move the debug logging of link_bw and rate_select to intel_dp_link_training_clock_recovery(), and clean up the extra intel_dp_compute_rate() call and extra clutter from the already overcrowded intel_dp_compute_config(). v2: Rewrote commit message (Rodrigo, Manasi) Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c5cf6a179e2d244eceb6bb80a792765d9efbee4f.1524730974.git.jani.nikula@intel.com
-
Jani Nikula authored
We haven't used the DP bw constants here for a while. No functional changes. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1dc7763cdc70c7f64c0a01f76f218d9ac0717227.1524730974.git.jani.nikula@intel.com
-
Jani Nikula authored
Prefer INTEL_GEN() over INTEL_INFO()->gen except in special circumstances. v2: don't change device info dump (Chris) Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180426113521.28417-1-jani.nikula@intel.com
-
Chris Wilson authored
The majority of the engine state dumping is too voluminous to be useful outside of a controlled setup, though a few do accompany severe errors. Keep the debug dumps next to the errors, but hide the others behind a CI compile flag. This becomes more useful when adding more dumps to latency sensitive paths. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180426103219.22181-1-chris@chris-wilson.co.uk
-
Tvrtko Ursulin authored
We can convert engine stats from a spinlock to seqlock to ensure interrupt processing is never even a tiny bit delayed by parallel readers. There is a smidgen bit more cost on the write lock side, and an extremely unlikely chance that readers will have to retry a few times in face of heavy interrupt load. But it should be extremely unlikely given how lightweight read side section is compared to the interrupt processing side, and also compared to the rest of the code paths which can lead into it. Furthermore, writer is the ones doing the real, latency sensitive work, while readers are only informative. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180426074716.7352-1-tvrtko.ursulin@linux.intel.com
-
- 25 Apr, 2018 3 commits
-
-
Oscar Mateo authored
Interrupt handling in Gen11 is quite different from previous platforms. v2: Rebased (Michel) v3: Rebased with wiggle v4: Rebased, remove TODO warning correctly (Daniele) v5: Rebased, made gen11_gtiir const while at it (Michel) v6: Rebased v7: Adapt to the style currently in upstream Suggested-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1524605995-22324-1-git-send-email-oscar.mateo@intel.com
-
Chris Wilson authored
A more complete, and more importantly stable, interface for controlling the RPS frequency range is available in sysfs, obsoleting the unstable debugfs. It's presence seems to trick people into using it, forgetting it is not ABI. References: https://bugs.freedesktop.org/show_bug.cgi?id=106237Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180425142334.27113-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
When filling the ring to align the emit pointer to the next cacheline, use memset64() rather than open-coding it. As we know that we always have an even number of dwords, we can replace the dword loop with the qword equivalent. v2: s/0/MI_NOOP<<32 | MI_NOOP/ Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180425123718.16366-1-chris@chris-wilson.co.uk
-
- 24 Apr, 2018 9 commits
-
-
Lyude Paul authored
Does what it says on the label, it's a little confusing debugging atomic check failures otherwise. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180411234302.2896-2-lyude@redhat.com
-
Chris Wilson authored
Instead of synchronously cancelling the timer and re-enabling it inside the reset callbacks, keep the timer enabled and let it die on its next wakeup if no longer required. This allows intel_engine_reset_breadcrumbs() to be used from an atomic (timer/softirq) context such as required for resetting an engine. It also allows us to react better to the user poking around debugfs for testing missed irqs. v2: Tighten the order of del_timer_sync as the fake_irq timer may trigger the hangcheck timer, and so we should cancel it first and then cancel the hangcheck (Mika) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180424142945.6787-1-chris@chris-wilson.co.uk
-
Gustavo A. R. Silva authored
There is a potential execution path in which variable err is returned without being properly initialized previously. Fix this by initializing variable err to 0. Addresses-Coverity-ID: 1468362 ("Uninitialized scalar variable") Fixes: f4ecfbfc ("drm/i915: Check whitelist registers across resets") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180424131545.GA4053@embeddedor.com
-
José Roberto de Souza authored
If the initial fbdev configuration (intel_fbdev_initial_config()) runs and there still no sink connected it will cause drm_fb_helper_initial_config() to return 0 as no error happened (but internally the return is -EAGAIN). Because no framebuffer was allocated, when a sink is connected intel_fbdev_output_poll_changed() will not execute drm_fb_helper_hotplug_event() that would trigger another try to do the initial fbdev configuration. So here allowing drm_fb_helper_hotplug_event() to be executed when there is no framebuffer allocated and fbdev was not set up yet. This issue also happens when a MST DP sink is connected since boot, as the MST topology is discovered in parallel if intel_fbdev_initial_config() is executed before the first sink MST is discovered it will cause this same issue. This is a follow-up patch of https://patchwork.freedesktop.org/patch/196089/ Changes from v1: - not creating a dump framebuffer anymore, instead just allowing drm_fb_helper_hotplug_event() to execute when fbdev is not setup yet. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104158 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104425 Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: frederik <frederik.schwan@linux.com> # 4.15.17 Tested-by: Ian Pilcher <arequipeno@gmail.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180418234158.9388-1-jose.souza@intel.com
-
Chris Wilson authored
Knowing the offset of the per-engine scratch/HWS page during boot is not very informative, so remove the DRM_DEBUG. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180424115236.2022-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
If we have more than a few, possibly several thousand request in the queue, don't show the central portion, just the first few and the last being executed and/or queued. The first few should be enough to help identify a problem in execution, and most often comparing the first/last in the queue is enough to identify problems in the scheduling. We may need some fine tuning to set MAX_REQUESTS_TO_SHOW for common debug scenarios, but for the moment if we can avoiding spending more than a few seconds dumping the GPU state that will avoid a nasty livelock (where hangcheck spends so long dumping the state, it fires again and starts to dump the state again in parallel, ad infinitum). v2: Remember to print last not the stale rq iter after the loop. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180424081600.27544-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
printk unhelpfully inserts a '\n' between consecutive calls, and since our drm_printf wrapper may be emitting info a seq_file instead, KERN_CONT is not an option. To work with any drm_printf destination, we need to build up the output into a temporary buf on the stack and then feed the complete line in a single call to printk. Fixes: b7268c5e ("drm/i915: Pack params to engine->schedule() into a struct") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180424010839.22860-1-chris@chris-wilson.co.uk
-
Mika Kuoppala authored
We need to be careful to not let compiler evaluate the expiration and the operation on it's terms. Document and enforce that COND will be evaluated before checking timeout expiration. Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180423113754.28424-2-mika.kuoppala@linux.intel.com
-
Mika Kuoppala authored
We use jiffies to determine when wait expires. However Imre did find out that jiffies can and will do a >1 increments on certain situations [1]. When this happens in a wait_for loop, we return timeout errorneously much earlier than what the real wallclock would say. We can't afford our waits to timeout prematurely. Discard jiffies and change to ktime to detect timeouts. v2: added bugzilla entry (Imre), added stable (Chris) Reported-by: Imre Deak <imre.deak@intel.com> References: https://lkml.org/lkml/2018/4/18/798 [1] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105771 Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180423113754.28424-1-mika.kuoppala@linux.intel.com
-
- 23 Apr, 2018 7 commits
-
-
Matt Atwood authored
Adding a missing GT2 sku discovered off hardware. Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1524522483-19987-1-git-send-email-matthew.s.atwood@intel.com
-
https://github.com/intel/gvt-linuxJani Nikula authored
- Minor condition check improvment (Gustavo A. R. Silva) - Non-priviliged batch buffer scan (Yan Zhao) - Scheduling optimizations (Zhipeng Gong) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/5dafba29-b2bd-6b94-630e-db5c009da7e3@intel.com
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1466154 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
-
Gustavo A. R. Silva authored
The checks are misleading and not required [1]. [1] https://lkml.org/lkml/2018/3/19/1792 Addresses-Coverity-ID: 1466017 Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
-
Zhao Yan authored
For perfomance purpose, scanning of non-privileged batch buffer is turned off by default. But for debugging purpose, it can be turned on via debugfs. After scanning, we submit the original non-privileged batch buffer into hardware, so that the scanning is only a peeking window of guest submitted commands and will not affect the execution results. v4: - refine debugfs print format&content (zhenyu wang) - print engine id instread of engine name to prevent potential memory leak in debugfs warning message. (zhenyu wang) v3: - change vgpu->scan_nonprivbb from type bool to u32, so it is able to selectively turn on/off scanning of non-privileged batch buffer on engine level. e.g. if vgpu->scan_nonprivbb=3, then it will scan non-privileged batch buffer on engine 0 and 1. - in debugfs interface to set vgpu->scan_nonprivbb, print warning message to warn user and explicitly tell state change in kernel log (zhenyu wang) v2: - rebase - update comments for start_gma_offset (henry) Signed-off-by: Zhao Yan <yan.y.zhao@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
-
Zhipeng Gong authored
When there is only one vGPU in GVT-g and it submits workloads continuously, it will not be scheduled out, vgpu_update_timeslice is not called and its sched_in_time is not updated in a long time, which can be several seconds or longer. Once GVT-g pauses to submit workload for this vGPU due to heavy host CPU workload, this vGPU get scheduled out and vgpu_update_timeslice is called, its left_ts will be subtract by a big value from sched_out_time - sched_in_time. When GVT-g is going to submit workload for this vGPU again, it will not be scheduled in until gvt_balance_timeslice reaches stage 0 and reset its left_ts, which introduces several hunderand milliseconds latency. This patch updates time slice in every ms to update sched_in_time timely. v2: revise commit message v3: use more concise expr. (Zhenyu) Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Min He <min.he@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
-
Zhipeng Gong authored
intel_gvt_schedule check timer through a counter and is supposed to wake up to increase the counter every ms. In a system with heavy workload, gvt_service_thread can not get a chance to run right after wake up and will be delayed several milliseconds. As a result, one hundred counter interval means several hundred milliseconds in real time. This patch use real time instead of counter to do timer check. v2: remove static variable. (Zhenyu) v3: correct expire_time update. (Zhenyu) Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Min He <min.he@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
-
- 21 Apr, 2018 1 commit
-
-
Hans de Goede authored
Before this commit the WaSkipStolenMemoryFirstPage workaround code was skipping the first 4k by passing 4096 as start of the address range passed to drm_mm_init(). This means that calling drm_mm_reserve_node() to try and reserve the firmware framebuffer so that we can inherit it would always fail, as the firmware framebuffer starts at address 0. Commit d4353761 ("drm/i915: skip the first 4k of stolen memory on everything >= gen8") says in its commit message: "This is confirmed to fix Skylake screen flickering issues (probably caused by the fact that we initialized a ring in the first page of stolen, but I didn't 100% confirm this theory)." Which suggests that it is safe to use the first page for a linear framebuffer as the firmware is doing (see note below). This commit always passes 0 as start to drm_mm_init() and works around WaSkipStolenMemoryFirstPage in i915_gem_stolen_insert_node_in_range() by insuring the start address passed by to drm_mm_insert_node_in_range() is always 4k or more. All entry points to i915_gem_stolen.c go through i915_gem_stolen_insert_node_in_range(), so that any newly allocated objects such as ring-buffers will not be allocated in the first 4k. The one exception is i915_gem_object_create_stolen_for_preallocated() which directly calls drm_mm_reserve_node() which now will be able to use the first 4k. This fixes the i915 driver no longer being able to inherit the firmware framebuffer on gen8+, which fixes the video output changing from the vendor logo to a black screen as soon as the i915 driver is loaded (on systems without fbcon). Some notes about the mapping of the BIOS framebuffer: v1 led to some discussion if the assumption of the intel_display.c code that the firmware framebuffer is a linear mapping of the stolen memory starting at offset 0 is still correct, because that would mean that the GOP does not implement the WaSkipStolenMemoryFirstPage workaround. To verify this the following code was added at the end of i915_gem_object_create_stolen_for_preallocated() : pr_err("first ggtt entry before bind: 0x%016llx\n", readq(dev_priv->ggtt.gsm)); ret = i915_vma_bind(vma, HAS_LLC(dev_priv) ? I915_CACHE_LLC : I915_CACHE_NONE, PIN_UPDATE); pr_err("i915_vma_bind ret %d\n", ret); pr_err("first ggtt entry after bind: 0x%016llx\n", readq(dev_priv->ggtt.gsm)); Which prints the mapping of the first page, then does a vma_bind() to force update the mapping with our linear view of the framebuffer and then prints the mapping of the first page again. On an Asrock B150M Pro4S/D3 mainboard with i5-6500 CPU this prints: [ 1.651141] first ggtt entry before bind: 0x0000000078c00001 [ 1.651151] i915_vma_bind ret 0 [ 1.651152] first ggtt entry after bind: 0x0000000078c00083 And "sudo cat /proc/iomem | grep Stolen" gives: 78c00000-88bfffff : Graphics Stolen Memory There are no visual changes with this patch (BIOS vendor logo still stays in place when we inherit the BIOS framebuffer), so the vma_bind() does not impact which memory is being scanned out. The address of the first ggtt entry matches with the start of stolen and the i915_vma_bind call only changes the first gtt entry's flags, or-ing in _PAGE_RW (BIT(1)) and PPAT_CACHED (BIT(7)), which perfectly matches what we would expect based on gen8_pte_encode()'s behavior. So it seems that the GOP indeed does NOT implement the wa and the i915's code assuming a linear mapping at the start of stolen for the BIOS fb still holds true for gen8+. I've also tested this on a Cherry Trail based device (a GPD Win) with identical results (the flags are 0x1b after the vma_bind on CHT, which matches with I915_CACHE_NONE). Changed in v2: No code changes, extended the commit message with the verification that the intel_display.c BIOS framebuffer mapping is still correct. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180420095933.16442-1-hdegoede@redhat.com
-
- 20 Apr, 2018 6 commits
-
-
Dhinakaran Pandiyan authored
Timestamps are useful for IGT tests that trigger PSR exit and/or wait for PSR entry. v2: Removed seqlock (Ville) Removed erroneous warning in irq loop (Chris) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Jose Roberto de Souza <jose.souza@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180403212420.25007-4-dhinakaran.pandiyan@intel.com
-
Dhinakaran Pandiyan authored
Interrupts other than the one for AUX errors are required only for debug, so unmask them via debugfs when the user requests debug. User can make such a request with echo 1 > <DEBUG_FS>/dri/0/i915_edp_psr_debug There are no locks to serialize PSR debug enabling from irq_postinstall() and debugfs for simplicity. As irq_postinstall() is called only during module initialization/resume and IGT subtests aren't expected to modify PSR debug at those times, we should be safe. v2: Unroll loops (Ville) Avoid resetting error mask bits. v3: Unmask interrupts in postinstall() if debug was still enabled. Avoid RMW (Ville) v4: Avoid extra IMR write introduced in the previous version.(Jose) Style changes, renames (Jose). Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Jose Roberto de Souza <jose.souza@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180405013717.24254-1-dhinakaran.pandiyan@intel.com
-
Ville Syrjälä authored
Plug in the bdw+ irq handling for PSR interrupts. bdw+ supports psr on any transcoder in theory, though the we don't currenty enable PSR except on the EDP transcoder. v2: From DK * Rebased on drm-tip v3: Switched author to Ville based on IRC discussion. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Jose Roberto de Souza <jose.souza@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180403212420.25007-2-dhinakaran.pandiyan@intel.com
-
Daniel Vetter authored
The definitions for the error register should be valid on bdw/skl too, but there we haven't even enabled DE_MISC handling yet. Somewhat confusing the the moved register offset on bdw is only for the _CTL/_AUX register, and that _IIR/IMR stayed where they have been on bdw. v2: Fixes from Ville. v3: From DK * Rebased on drm-tip * Removed BDW IIR bit definition, looks like an unintentional change that should be in the following patch. v4: From DK * Don't mask REG_WRITE. References: bspec/11974 [SRD Interrupt Bit Definition DevHSW] Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Jose Roberto de Souza <jose.souza@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180405220023.9449-1-dhinakaran.pandiyan@intel.com
-
Daniel Vetter authored
One is outright unused, other can be made static. Drive-by cleanup while accidentally reading dc code. Cc: Imre Deak <imre.deak@intel.com> Acked-by: Imre Deak <imre.deak@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180417100225.12286-1-daniel.vetter@ffwll.ch
-
Imre Deak authored
The DMC FW specific part of display WA#1183 is supposed to be enabled whenever enabling DC5 or DC6, so move it to the DC6 enable function from the DC6 disable function. I noticed this after Daniel's patch to remove the unused skl_disable_dc6() function. Fixes: 53421c2f ("drm/i915: Apply Display WA #1183 on skl, kbl, and cfl") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180419155109.29451-1-imre.deak@intel.com
-
- 19 Apr, 2018 3 commits
-
-
Ville Syrjälä authored
Make the PIPE_CONF_CHECK macros a bit more robust by wrapping them in do {} while(0). Avoids funky sirprises when you try put an 'else' after a PIPE_CONF_CHECK invocation... Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180316183625.16316-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
-
Jani Nikula authored
Move the limit checks near the calculations for each field, and actually log the values that exceed limits. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180419085940.21505-1-jani.nikula@intel.com
-
Abhay Kumar authored
In GLK when the device boots with only 1366x768 panel without audio, HDA codec doesn't come up. In this case, the CDCLK is less than twice the BCLK. Even though audio isn't being enabled, having a too low CDCLK leads to audio probe failing altogether. Require CDCLK to be at least twice the BLCK regardless of audio. This is a minimal fix to improve things. Unfortunately, this a) leads to too high CDCLK being used when audio is not used, and b) is still not enough to fix audio probe when no outputs are connected at probe time. The proper fix would be to increase CDCLK dynamically from the audio component hooks. v2: - Address comment (Jani) - New design approach v3: - Typo fix on top of v1 v4 by Jani: rewrite commit message, add comment in code Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@gmail.com> Cc: Wenkai Du <wenkai.du@intel.com> Reviewed-by: Wenkai Du <wenkai.du@intel.com> Tested-by: Wenkai Du <wenkai.du@intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102937Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180418103707.14645-1-jani.nikula@intel.com
-
- 18 Apr, 2018 2 commits
-
-
Chris Wilson authored
Today we only want to pass along the priority to engine->schedule(), but in the future we want to have much more control over the various aspects of the GPU during a context's execution, for example controlling the frequency allowed. As we need an ever growing number of parameters for scheduling, move those into a struct for convenience. v2: Move the anonymous struct into its own function for legibility and ye olde gcc. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180418184052.7129-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
Having moved the priotree struct into i915_scheduler.h, identify it as the scheduling element and rebrand into i915_sched. This becomes more useful as we start attaching more information we require to propagate through the scheduler. v2: Use i915_sched_node for future distinctiveness Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180418184052.7129-2-chris@chris-wilson.co.uk
-