- 04 Apr, 2024 10 commits
-
-
Ville Syrjälä authored
Currently we always reprogram CDCLK from the intel_set_cdclk_pre_plane_update() when using squash/crawl. The code only works correctly for the cd2x update or full modeset cases, and it was simply never updated to deal with squash/crawl. If the CDCLK frequency is increasing we must reprogram it before we do anything else that might depend on the new higher frequency, and conversely we must not decrease the frequency until everything that might still depend on the old higher frequency has been dealt with. Since cdclk_state->pipe is only relevant when doing a cd2x update we can't use it to determine the correct sequence during squash/crawl. To that end introduce cdclk_state->disable_pipes which simply indicates that we must perform the update while the pipes are disable (ie. during intel_set_cdclk_pre_plane_update()). Otherwise we use the same old vs. new CDCLK frequency comparsiong as for cd2x updates. The only remaining problem case is when the voltage_level needs to increase due to a DDI port, but the CDCLK frequency is decreasing (and not all pipes are being disabled). The current approach will not bump the voltage level up until after the port has already been enabled, which is too late. But we'll take care of that case separately. v2: Don't break the "must disable pipes case" v3: Keep the on stack 'pipe' for future use Cc: stable@vger.kernel.org Fixes: d62686ba ("drm/i915/adl_p: CDCLK crawl support for ADL") Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Reviewed-by:
Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-2-ville.syrjala@linux.intel.com
-
Mitul Golani authored
Add read/write calls for Adaptive Sync SDP. Signed-off-by:
Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Reviewed-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
-
Mitul Golani authored
Compute vrr_vsync_start/end, which sets the position for hardware to send the Vsync at a fixed position relative to the end of the Vblank. --v2: - Updated VSYNC_START/END macros to VRR_VSYNC_START/END. (Ankit) - Updated bit fields of VRR_VSYNC_START/END. (Ankit) --v3: - Add PIPE_CONF_CHECK_I(vrr.vsync_start/end). - Read/write vrr_vsync params only when we intend to send adaptive_sync sdp. --v4: - Use VRR_SYNC_START/END macros correctly. --v5: - Send AS SDP only when VRR is enabled. --v6: - Add TRANS_VRR_VSYNC before enabling VRR as per bspec. (Ankit) Signed-off-by:
Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by:
-
Mitul Golani authored
Enable infoframe and add state checker for Adaptive Sync SDP enablement. --v1: - crtc_state->infoframes.enable, to add on correct place holder. Signed-off-by:
-
Mitul Golani authored
Add necessary function definitions to compute AS SDP data. The new intel_dp_compute_as_sdp function computes AS SDP values based on the display configuration, ensuring proper handling of Variable Refresh Rate (VRR). --v2: - Added DP_SDP_ADAPTIVE_SYNC to infoframe_type_to_idx(). [Ankit] - Separated patch for intel_read/write_dp_sdp. [Ankit] - _HSW_VIDEO_DIP_ASYNC_DATA_A should be from ADL onward. [Ankit] - Fixed indentation issues. [Ankit] --v3: - Added VIDEO_DIP_ENABLE_AS_HSW flag to intel_dp_set_infoframes. --v4: - Added HAS_VRR check before writing AS SDP. --v5: Added missed HAS_VRR check before reading AS SDP. --v6: - Used Adaptive Sync sink status as a check for read/write SDP. (Ankit) --v7: - Remove as_sdp_enable from crtc_state. - Add a comment mentioning current support of DP_AS_SDP_AVT_FIXED_VTOTAL. - Add state checker for AS_SDP infoframe enable. --v8: - Drop conn_state from intel_dp_compute_as_sdp, as not used. - Remove fullstop in subject line. --v9: - Add vrr.enable instead of is_in_vrr_range. --v10: - remove vrefresh and connector, as they are no longer required. Signed-off-by:
-
Mitul Golani authored
Add a wrapper function to check if both the source and sink support Adaptive Sync SDP. --v1: Just use drm/i915/dp in subject line. Signed-off-by:
-
Mitul Golani authored
Add the necessary structures and functions to handle reading and unpacking Adaptive Sync Secondary Data Packets. Also add support to write and pack AS SDP. --v2: - Correct use of REG_BIT and REG_GENMASK. [Jani] - Use as_sdp instead of async. [Jani] - Remove unrelated comments and changes. [Jani] - Correct code indent. [Jani] --v3: - Update definition names for AS SDP which are starting from HSW, as these defines are applicable for ADLP+.(Ankit) --v4: - Remove as_sdp_mode from crtc_state. - Drop metadata keyword. - For consistency, update ADL_ prefix or post fix as required. --v5: - Check if AS_SDP bit is set in crtc_state->infoframes.enable. If not return. - Check for HAS_AS_SDP() before setting VIDEO_DIP_ENABLE_AS_ADL mask. --v6: - Rename intel_read_dp_infoframe_as_sdp to intel_read_dp_as_sdp. --v7: - Add read back for length and vtotal correction. --v8: - Use as_sdp->target_rr & 0xFF. - Shift by 8 instead of 32, and drop casting to u64. - Remove changes which are does not belong to this patch. Signed-off-by:
-
Mitul Golani authored
Add crtc state dump for Adaptive Sync SDP to know which crtc specifically caused the failure. --v1: - Rebase Patches to latest. Signed-off-by:
-
Mitul Golani authored
Add structure representing Adaptive Sync Secondary Data Packet (AS SDP). Also, add Adaptive Sync SDP logging in drm_dp_helper.c to facilitate debugging. --v2: - Update logging. [Jani, Ankit] - Use 'as_sdp' instead of 'async' [Ankit] - Correct define placeholders to where they are actually used. [Jani] - Update members in 'as_sdp' structure to make it uniform. [Jani] --v3: - Added changes to dri-devel mailing list. No code changes. --v4: - Instead of directly using operation mode, use an enum to accommodate all operation modes (Ankit). --v5: Nit-pick changes to commit message. --v6: - Add correct place holder and name change for AS_SDP_OP_MODE. - Separate i915 changes from drm changes. - Remove extra lines. --v7: - Add drm/dp in subject line (Ankit) Signed-off-by:
-
Mitul Golani authored
Add an API that indicates support for Adaptive Sync SDP in the sink, which can be utilized by the rest of the DP programming. --v1: - Format commit message properly. Signed-off-by:
-
- 03 Apr, 2024 7 commits
-
-
Ville Syrjälä authored
There is no reason to make this debugfs file for a simple boolean so complicated. Just use debugfs_create_bool(). Reviewed-by:
-
Ville Syrjälä authored
ICL supposedly doesn't support FEC on MST. Reject it. Cc: stable@vger.kernel.org Fixes: d51f25eb ("drm/i915: Add DSC support to MST path") Reviewed-by:
-
Ville Syrjälä authored
The MST code currently assumes that glk+ already supports MST+DSC, which is incorrect. We need to check for TGL+ actually. ICL does support SST+DSC, but supposedly it can't do MST+FEC which will also rule out MST+DSC. Note that a straight TGL+ check doesn't work here because DSC support can get fused out, so we do need to also check 'has_dsc'. Cc: stable@vger.kernel.org Fixes: d51f25eb ("drm/i915: Add DSC support to MST path") Reviewed-by:
-
Ville Syrjälä authored
Simplify our life by extracting the "do we need the glk scaler clock gating w/a?" check into a small helper. Reviewed-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by:
-
Ville Syrjälä authored
glk_pipe_scaler_clock_gating_wa() is messy. Clean it up via intel_de_rmw(), and also just pass in the whole crtc so the caller doesn't have to dance around so much. Reviewed-by:
-
Ville Syrjälä authored
Move some of the more trivial checks in the DP .mode_valid() hooks upwards to lessen the noise amongst the more complex checks. Reviewed-by:
-
Ville Syrjälä authored
We never set connector->doublescan_allowed, so the probe helper already filters out all doublescan modes for us. Sadly we still need to keep the explicit doublescan checks in .compute_config as outlined in commit e4dd27aa ("drm/i915: Allow DBLSCAN user modes with eDP/LVDS/DSI") Reviewed-by:
-
- 02 Apr, 2024 9 commits
-
-
Jani Nikula authored
This reverts commit 0d82a0d6. The commit failed to take into account that the parameter duplication and debugfs for char * parameters were subtly different between i915 core and display, and caused the DMC and PM to be disabled. Moreover, the patch was pushed with failing CI results. Revert, and get back to the drawing board. Acked-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Rodrigo Vivi authored
Catching up on 6.9-rc2 Signed-off-by: -
Jouni Högander authored
No need to write ALPM configuration for DP2.0 Panel Replay or PSR1. Signed-off-by:
Jouni Högander <jouni.hogander@intel.com> Reviewed-by:
Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240328141928.1311284-6-jouni.hogander@intel.com
-
Jouni Högander authored
Enable ALPM AUX-Less on source side for Panel Replay eDP. Also write all calculated AUX-Less configuration values accordingly. Enabling it on sink side is in upcoming patch. Bspec: 71477 v5: - mention enable is only on source side in commit message v4: - add comment explaining why AUX less is enabled on eDP panel replay without any extra checks v3: - do not use alpm_ctl as uninitialized variable v2: - do not set AUX-Wake related bits for AUX-Less case - drop switch to active latency - add SLEEP_HOLD_TIME_50_SYMBOLS - add PORT_ALPM_CTL_MAX_PHY_SWING_HOLD Signed-off-by: -
Jouni Högander authored
Add get function for silence period and lfps half cycle. Values are taken from the tables in bspec. Bspec: 71632 v3: - use PORT_ALPM_CTL_SILENCE_PERIOD_MASK instead of value 255 - use PORT_ALPM_LFPS_CTL_LAST_LFPS_HALF_CYCLE_DURATION_MASK instead of value 31 v2: - fix some checks - add some more comments Signed-off-by: -
Jouni Högander authored
Calculate aux less wake time and store it into alpm_params struct Bspec: 71477 v4: - re-use fast_wake_lines to store aux_less_wake_lines v3: - use ALPM_CTL_AUX_LESS_WAKE_TIME_MASK instead of value 63 v2: - use variables instead of values directly - fix max value - move converting port clock to Mhz into _lnl_compute_aux_less_wake_time Signed-off-by:
-
Jouni Högander authored
Couple of ALPM AUX-Less related fields are missing from ALPM register definitions. Add these and remove some duplicate definitions. Bspec: 70294 V2: add Bspec reference Signed-off-by:
-
Jani Nikula authored
The dmc_firmware_path parameter is clearly a display parameter. Move it there so it's available to both i915 and xe modules. This also cleans up the ugly member in struct xe_device. Reviewed-by:
-
Jani Nikula authored
Use localized __diag_push(), __diag_ignore_all() with rationale, and __diag_pop() for specific initializations instead of blanket disabling of -Woverride-init across several files. Note that we've tried this before with commit 88e96644 ("drm/i915: use localized __diag_ignore_all() instead of per file") and reverted in commit 290d1610 ("Revert "drm/i915: use localized __diag_ignore_all() instead of per file""). The issue turned out to be in __diag_ignore_all() and it was fixed by commit 689b097a ("compiler-gcc: Suppress -Wmissing-prototypes warning for all supported GCC"). So we should be able to pull this off now. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
- 01 Apr, 2024 1 commit
-
-
Ankit Nautiyal authored
For DISPLAY < 13, compressed bpp is chosen from a list of supported compressed bpps. Fix the condition to choose the appropriate compressed bpp from the list. Fixes: 1c56e9a3 ("drm/i915/dp: Get optimal link config to have best compressed bpp") Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: <stable@vger.kernel.org> # v6.7+ Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10162Signed-off-by:
Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240305054443.2489895-1-ankit.k.nautiyal@intel.com
-
- 31 Mar, 2024 12 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Deduplicate Kconfig entries for CONFIG_CXL_PMU - Fix unselectable choice entry in MIPS Kconfig, and forbid this structure - Remove unused include/asm-generic/export.h - Fix a NULL pointer dereference bug in modpost - Enable -Woverride-init warning consistently with W=1 - Drop KCSAN flags from *.mod.c files * tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: Fix typo HEIGTH to HEIGHT Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries kbuild: make -Woverride-init warnings more consistent modpost: do not make find_tosym() return NULL export.h: remove include/asm-generic/export.h kconfig: do not reparent the menu inside a choice block MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fixes from Borislav Petkov: - Fix more issues in the AMD FMPM driver * tag 'edac_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: RAS: Avoid build errors when CONFIG_DEBUG_FS=n RAS/AMD/FMPM: Safely handle saved records of various sizes RAS/AMD/FMPM: Avoid NULL ptr deref in get_saved_records()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Borislav Petkov: - Fix an unused function warning on irqchip/irq-armada-370-xp - Fix the IRQ sharing with pinctrl-amd and ACPI OSL * tag 'irq_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/armada-370-xp: Suppress unused-function warning genirq: Introduce IRQF_COND_ONESHOT and use it in pinctrl-amd
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf fixes from Borislav Petkov: - Define the correct set of default hw events on AMD Zen4 - Use the correct stalled cycles PMCs on AMD Zen2 and newer - Fix detection of the LBR freeze feature on AMD * tag 'perf_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd/core: Define a proper ref-cycles event for Zen 4 and later perf/x86/amd/core: Update and fix stalled-cycles-* events for Zen 2 and later perf/x86/amd/lbr: Use freeze based on availability x86/cpufeatures: Add new word for scattered features
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timers update from Borislav Petkov: - Volunteer in Anna-Maria and Frederic as timers co-maintainers so that tglx can relax more :-P * tag 'timers_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Add co-maintainers for time[rs]
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Borislav Petkov: - Fix a format specifier build error in objtool during an x32 build * tag 'objtool_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix compile failure when using the x32 compiler
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Make sure single object builds in arch/x86/virt/ ala make ... arch/x86/virt/vmx/tdx/seamcall.o work again - Do not do ROM range scans and memory validation when the kernel is running as a SEV-SNP guest as those can get problematic and, before that, are not really needed in such a guest - Exclude the build-time generated vdso-image-x32.o object from objtool validation and in particular the return sites in there due to a warning which fires when an unpatched return thunk is being used - Improve the NMI CPUs stall message to show additional information about the state of each CPU wrt the NMI handler - Enable gcc named address spaces support only on !KCSAN configs due to compiler options incompatibility - Revert a change which was trying to use GB pages for mapping regions only when the regions would be large enough but that change lead to kexec failing - A documentation fixlet * tag 'x86_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Use obj-y to descend into arch/x86/virt/ x86/sev: Skip ROM range scans and validation for SEV-SNP guests x86/vdso: Fix rethunk patching for vdso-image-x32.o too x86/nmi: Upgrade NMI backtrace stall checks & messages x86/percpu: Disable named address spaces for KCSAN Revert "x86/mm/ident_map: Use gbpages only where full GB page should be mapped." Documentation/x86: Fix title underline length -
Isak Ellmer authored
Fixed a typo in some variables where height was misspelled as heigth. Signed-off-by:
Isak Ellmer <isak01@gmail.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Nathan Chancellor authored
As of the first s390 pull request during the 6.9 merge window, commit 691632f0 ("Merge tag 's390-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux"), s390 can be built with LLVM=1 when using LLVM 18.1.0, which is the first version that has SystemZ support implemented in ld.lld and llvm-objcopy. Update the supported architectures table in the Kbuild LLVM documentation to note this explicitly to make it more discoverable by users and other developers. Additionally, this brings s390 in line with the rest of the architectures in the table, which all support LLVM=1. Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
Borislav Petkov (AMD) authored
When KCSAN and CONSTRUCTORS are enabled, one can trigger the "Unpatched return thunk in use. This should not happen!" catch-all warning. Usually, when objtool runs on the .o objects, it does generate a section .return_sites which contains all offsets in the objects to the return thunks of the functions present there. Those return thunks then get patched at runtime by the alternatives. KCSAN and CONSTRUCTORS add this to the object file's .text.startup section: ------------------- Disassembly of section .text.startup: ... 0000000000000010 <_sub_I_00099_0>: 10: f3 0f 1e fa endbr64 14: e8 00 00 00 00 call 19 <_sub_I_00099_0+0x9> 15: R_X86_64_PLT32 __tsan_init-0x4 19: e9 00 00 00 00 jmp 1e <__UNIQUE_ID___addressable_cryptd_alloc_aead349+0x6> 1a: R_X86_64_PLT32 __x86_return_thunk-0x4 ------------------- which, if it is built as a module goes through the intermediary stage of creating a <module>.mod.c file which, when translated, receives a second constructor: ------------------- Disassembly of section .text.startup: 0000000000000010 <_sub_I_00099_0>: 10: f3 0f 1e fa endbr64 14: e8 00 00 00 00 call 19 <_sub_I_00099_0+0x9> 15: R_X86_64_PLT32 __tsan_init-0x4 19: e9 00 00 00 00 jmp 1e <_sub_I_00099_0+0xe> 1a: R_X86_64_PLT32 __x86_return_thunk-0x4 ... 0000000000000030 <_sub_I_00099_0>: 30: f3 0f 1e fa endbr64 34: e8 00 00 00 00 call 39 <_sub_I_00099_0+0x9> 35: R_X86_64_PLT32 __tsan_init-0x4 39: e9 00 00 00 00 jmp 3e <__ksymtab_cryptd_alloc_ahash+0x2> 3a: R_X86_64_PLT32 __x86_return_thunk-0x4 ------------------- in the .ko file. Objtool has run already so that second constructor's return thunk cannot be added to the .return_sites section and thus the return thunk remains unpatched and the warning rightfully fires. Drop KCSAN flags from the mod.c generation stage as those constructors do not contain data races one would be interested about. Debugged together with David Kaplan <David.Kaplan@amd.com> and Nikolay Borisov <nik.borisov@suse.com>. Reported-by:Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/r/0851a207-7143-417e-be31-8bf2b3afb57d@molgen.mpg.deSigned-off-by:
Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 Reviewed-by:
Nikolay Borisov <nik.borisov@suse.com> Reviewed-by:
Marco Elver <elver@google.com> Signed-off-by:
-
Arnd Bergmann authored
The -Woverride-init warn about code that may be intentional or not, but the inintentional ones tend to be real bugs, so there is a bit of disagreement on whether this warning option should be enabled by default and we have multiple settings in scripts/Makefile.extrawarn as well as individual subsystems. Older versions of clang only supported -Wno-initializer-overrides with the same meaning as gcc's -Woverride-init, though all supported versions now work with both. Because of this difference, an earlier cleanup of mine accidentally turned the clang warning off for W=1 builds and only left it on for W=2, while it's still enabled for gcc with W=1. There is also one driver that only turns the warning off for newer versions of gcc but not other compilers, and some but not all the Makefiles still use a cc-disable-warning conditional that is no longer needed with supported compilers here. Address all of the above by removing the special cases for clang and always turning the warning off unconditionally where it got in the way, using the syntax that is supported by both compilers. Fixes: 2cd3271b ("kbuild: avoid duplicate warning options") Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by:
Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
- 30 Mar, 2024 1 commit
-
-
Mikulas Patocka authored
When compiling the v6.9-rc1 kernel with the x32 compiler, the following errors are reported. The reason is that we take an "unsigned long" variable and print it using "PRIx64" format string. In file included from check.c:16: check.c: In function ‘add_dead_ends’: /usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:46:17: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘long unsigned int’ [-Werror=format=] 46 | "%s: warning: objtool: " format "\n", \ | ^~~~~~~~~~~~~~~~~~~~~~~~ check.c:613:33: note: in expansion of macro ‘WARN’ 613 | WARN("can't find unreachable insn at %s+0x%" PRIx64, | ^~~~ ... Signed-off-by:Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: linux-kernel@vger.kernel.org
-
