- 19 May, 2014 1 commit
-
-
Luciano Coelho authored
iwl_mvm_power_update_mac() (more specifically iwl_mvm_power_iterator()) relies on the phy_ctxt setting to decide whether the vif is active or not. When unassigning a chanctx, we should therefore call iwl_mvm_power_update_mac() after setting phy_chanctx to NULL. Signed-off-by:
Luciano Coelho <luciano.coelho@intel.com> Reviewed-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
- 15 May, 2014 5 commits
-
-
Johannes Berg authored
If DVM or MVM are built-in but LEDS_CLASS isn't then the current Kconfig will enable LED support and fail the build. Fix this by making the LED support depend on LEDS_CLASS being built-in or, if it is modular, only enabling it if iwlwifi also is. Signed-off-by:
-
Liad Kaufman authored
In the 8000 HW family the register for forcing an NMI has changed, so this allows to still be able to force an NMI while taking into account the HW in order to write to the correct register. Signed-off-by:
Liad Kaufman <liad.kaufman@intel.com> Reviewed-by:
-
Luciano Coelho authored
Instead of having two nearly identical functions to send the mac context commands, use a single way that can handle both the p2p and !p2p cases. Signed-off-by:
-
Emmanuel Grumbach authored
The firmware needs to know on what channel we run before we set the association bit in the MAC context. Change a bit the flow to achieve this. Signed-off-by: -
Matt Chen authored
Some APs (e.g. TP-LINK TL-WA801N) are disabling aggregation (downlink to station) when U-APSD is enabled, resulting in low throughput. Add a module parameter to allow disabling U-APSD support in the driver. Also re-enable U-APSD for -9 firmware since the firmare issues were fixed in this release. There are devices that won't support U-APSD even with newer firmware, so bring the TLV flag back to detect those. Signed-off-by:
Matt Chen <matt.chen@intel.com> Signed-off-by:
-
- 14 May, 2014 1 commit
-
-
Eran Harary authored
New transport need to configure internal memory based on the data in the (enlarged) alive notification from the firmware. Add a transport API for this. Signed-off-by:
Eran Harary <eran.harary@intel.com> Signed-off-by:
-
- 13 May, 2014 8 commits
-
-
Johannes Berg authored
In some situations (see comment) it makes sense to enable both chains (if available) to get better throughput by having chain diversity available. Signed-off-by:
-
Eran Harary authored
Fix a bug in nvm_read_section function if size of the section is a multiple of 2K: - if the size of the section is *not* multiple of 2K, then we will have: read(2K) - return 2K ... read(2K) - return 2K read(2K) - return the rest (in bytes) and exit the while loop. - else, if the size of the section is a multiple of 2K, then we have: read(2K) - return 2K read(2K) - return 2K read(2K) - return 2K read(2K) - return 0 and exit the while with an error. We should not return an error in the latter case, because it might well be that the section was completely read. Also, we try now to read all the sections as this is needed for new devices. Signed-off-by:
-
Emmanuel Grumbach authored
These values are used to give preference to WiFi according to a certain pattern. Signed-off-by: -
Eliad Peller authored
setting SKIP_OVER_DTIM when skip_dtim_periods is 0 causes a ucode assert. set the flag only if needed. Signed-off-by:
Eliad Peller <eliadx.peller@intel.com> Reviewed-by:
-
Emmanuel Grumbach authored
This fixes: ================================= [ INFO: inconsistent lock state ] 3.14.3+ #5 Tainted: G O --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/3/0 [HC0[0]:SC1[3]:HE1:SE0] takes: (&(&txq->lock)->rlock){+.?...}, at: [<ffffffffa059803c>] iwl_pcie_enqueue_hcmd+0x12c/0x1000 [iwlwifi] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810d9071>] __lock_acquire+0x5f1/0x13b0 [<ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0 [<ffffffff817ef80e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa0598f7a>] iwl_pcie_txq_check_wrptrs+0x6a/0xb0 [iwlwifi] [<ffffffffa0594b5a>] iwl_pcie_irq_handler+0xdba/0x2670 [iwlwifi] [<ffffffff810ef1e0>] irq_thread_fn+0x20/0x50 [<ffffffff810ef77f>] irq_thread+0x11f/0x150 [<ffffffff810a04f0>] kthread+0xf0/0x110 [<ffffffff817fa4bc>] ret_from_fork+0x7c/0xb0 irq event stamp: 1142192 hardirqs last enabled at (1142192): [<ffffffff817efb6c>] _raw_spin_unlock_irq+0x2c/0x40 hardirqs last disabled at (1142191): [<ffffffff817ef9ef>] _raw_spin_lock_irq+0x1f/0x80 softirqs last enabled at (1142188): [<ffffffff81079082>] _local_bh_enable+0x22/0x50 softirqs last disabled at (1142189): [<ffffffff8107ad35>] irq_exit+0xe5/0xf0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&txq->lock)->rlock); <Interrupt> lock(&(&txq->lock)->rlock); Fixes: ea68f460 ("iwlwifi: pcie: clarify TX queue need_update handling") Signed-off-by: -
Liad Kaufman authored
When calling IWL_DEBUG_*() dev_dbg() is currently used, and this could result in the log being ignored no matter the internal loglevel, since dev_dbg() may get turned on or off based on the dynamic debug mechanism. Replace the dev_dbg() with dev_printk() since dynamic printing is pointless as we use our own debug level mechanism and there is just a single dev_dbg() call in the code. Signed-off-by:
-
Emmanuel Grumbach authored
CMD_SYNC is really 0 which is confusing: if (cmd.flags & CMD_SYNC) is always false. Fix this by simply removing its definition. Signed-off-by: -
Emmanuel Grumbach authored
-
- 11 May, 2014 12 commits
-
-
Johannes Berg authored
There's an extra newline that shouldn't be there - remove it. Signed-off-by:
-
Johannes Berg authored
If a (debug) message is missing a newline, cause build error so we don't keep reintroducing this problem. This also prevents using a non-constant argument as the format string which is a good idea anyway (e.g. for security reasons.) Signed-off-by:
-
Avri Altman authored
A binding object associates virtual MACs to a Phy. Binding object can ask (and get) air time, thus allowing several MACs to share the medium. A binding object can be in either one of 3 states: 1) standalone - A single active MAC 2) Different Channel Mode (DCM) - There are 2 active MACs or more (not necessarily just clients), but each has its own channel. 3) Same Channel Mode (SCM) - There are 2 active MACs or more (not necessarily just clients), that share the same channel. This patch introduces an additional condition for enabling uAPSD: uAPSD should be disabled for a client in DCM. The reason for that is a low latency issue in Miracast. Signed-off-by:
Avri Altman <avri.altman@intel.com> Reviewed-by:
-
Avri Altman authored
If two clients are active while each one is alone on its channel, and the applicable flags are set, power management should be enabled. This condition is referred to as Different Channel Mode (DCM). Up to now, in DCM power management was supported only on BSS. This patch adds support for P2P power management in DCM as well. Signed-off-by:
-
Emmanuel Grumbach authored
There was a deadlock in monitor mode when we were setting the channel if the channel was not 1. ====================================================== [ INFO: possible circular locking dependency detected ] 3.14.3 #4 Not tainted ------------------------------------------------------- iw/3323 is trying to acquire lock: (&local->chanctx_mtx){+.+.+.}, at: [<ffffffffa062e2f2>] ieee80211_vif_release_channel+0x42/0xb0 [mac80211] but task is already holding lock: (&local->iflist_mtx){+.+...}, at: [<ffffffffa0609e0a>] ieee80211_set_monitor_channel+0x5a/0x1b0 [mac80211] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&local->iflist_mtx){+.+...}: [<ffffffff810d95bb>] __lock_acquire+0xb3b/0x13b0 [<ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0 [<ffffffff817eb9c8>] mutex_lock_nested+0x78/0x4f0 [<ffffffffa06225cf>] ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa0518189>] iwl_mvm_recalc_multicast+0x49/0xa0 [iwlmvm] [<ffffffffa051822e>] iwl_mvm_configure_filter+0x4e/0x70 [iwlmvm] [<ffffffffa05e6d43>] ieee80211_configure_filter+0x153/0x5f0 [mac80211] [<ffffffffa05e71f5>] ieee80211_reconfig_filter+0x15/0x20 [mac80211] [snip] -> #1 (&mvm->mutex){+.+.+.}: [<ffffffff810d95bb>] __lock_acquire+0xb3b/0x13b0 [<ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0 [<ffffffff817eb9c8>] mutex_lock_nested+0x78/0x4f0 [<ffffffffa0517246>] iwl_mvm_add_chanctx+0x56/0xe0 [iwlmvm] [<ffffffffa062ca1e>] ieee80211_new_chanctx+0x13e/0x410 [mac80211] [<ffffffffa062d953>] ieee80211_vif_use_channel+0x1c3/0x5a0 [mac80211] [<ffffffffa06035ab>] ieee80211_add_virtual_monitor+0x1ab/0x6b0 [mac80211] [<ffffffffa06052ea>] ieee80211_do_open+0xe6a/0x15a0 [mac80211] [<ffffffffa0605a79>] ieee80211_open+0x59/0x60 [mac80211] [snip] -> #0 (&local->chanctx_mtx){+.+.+.}: [<ffffffff810d6cb7>] check_prevs_add+0x977/0x980 [<ffffffff810d95bb>] __lock_acquire+0xb3b/0x13b0 [<ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0 [<ffffffff817eb9c8>] mutex_lock_nested+0x78/0x4f0 [<ffffffffa062e2f2>] ieee80211_vif_release_channel+0x42/0xb0 [mac80211] [<ffffffffa0609ec3>] ieee80211_set_monitor_channel+0x113/0x1b0 [mac80211] [<ffffffffa058fb37>] cfg80211_set_monitor_channel+0x77/0x2b0 [cfg80211] [<ffffffffa056e0b2>] __nl80211_set_channel+0x122/0x140 [cfg80211] [<ffffffffa0581374>] nl80211_set_wiphy+0x284/0xaf0 [cfg80211] [snip] other info that might help us debug this: Chain exists of: &local->chanctx_mtx --> &mvm->mutex --> &local->iflist_mtx Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&local->iflist_mtx); lock(&mvm->mutex); lock(&local->iflist_mtx); lock(&local->chanctx_mtx); *** DEADLOCK *** This deadlock actually occurs: INFO: task iw:3323 blocked for more than 120 seconds. Not tainted 3.14.3 #4 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. iw D ffff8800c8afcd80 4192 3323 3322 0x00000000 ffff880078fdb7e0 0000000000000046 ffff8800c8afcd80 ffff880078fdbfd8 00000000001d5540 00000000001d5540 ffff8801141b0000 ffff8800c8afcd80 ffff880078ff9e38 ffff880078ff9e38 ffff880078ff9e40 0000000000000246 Call Trace: [<ffffffff817ea841>] schedule_preempt_disabled+0x31/0x80 [<ffffffff817ebaed>] mutex_lock_nested+0x19d/0x4f0 [<ffffffffa06225cf>] ? ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa06225cf>] ? ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa052a680>] ? iwl_mvm_power_mac_update_mode+0xc0/0xc0 [iwlmvm] [<ffffffffa06225cf>] ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa0529357>] _iwl_mvm_power_update_binding+0x27/0x80 [iwlmvm] [<ffffffffa0516eb1>] iwl_mvm_unassign_vif_chanctx+0x81/0xc0 [iwlmvm] [<ffffffffa062d3ff>] __ieee80211_vif_release_channel+0xdf/0x470 [mac80211] [<ffffffffa062e2fa>] ieee80211_vif_release_channel+0x4a/0xb0 [mac80211] [<ffffffffa0609ec3>] ieee80211_set_monitor_channel+0x113/0x1b0 [mac80211] [<ffffffffa058fb37>] cfg80211_set_monitor_channel+0x77/0x2b0 [cfg80211] [<ffffffffa056e0b2>] __nl80211_set_channel+0x122/0x140 [cfg80211] [<ffffffffa0581374>] nl80211_set_wiphy+0x284/0xaf0 [cfg80211] This fixes https://bugzilla.kernel.org/show_bug.cgi?id=75541 Cc: <stable@vger.kernel.org> [3.13+] Reviewed-by: -
David Spinadel authored
Stop sched scan on bss_info_changed if !idle to avoid sched scan during association. Signed-off-by:
David Spinadel <david.spinadel@intel.com> Reviewed-by:
-
David Spinadel authored
Add an option to notify mac80211 about sched scan complete from iwl_mvm_stop_sched_scan(), to enable this notification when the stop was called from within the driver. Signed-off-by:
Alexander Bondar <alexander.bondar@intel.com> Reviewed-by:
-
Eran Harary authored
in family 8000: additional channel 14 added to the low band list. now the number of channels in the low band is 15. Signed-off-by:
Dor Shaish <dor.shaish@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
Some races with the hardware can happen when we take ownership of the device. Don't give up after the first try. Cc: <stable@vger.kernel.org> Reviewed-by:
-
Eran Harary authored
The 8000 family products need a file on the file system which is used as NVM. This file is a must, if no filename is supplied as module parameter, use a default filename. Signed-off-by:
-
Emmanuel Grumbach authored
This is not needed since the PCIe layer disables the bottom halves before it calls the op_mode. Signed-off-by: -
Johannes Berg authored
All messages should have a trailing newline, add all the missing ones. Also make all messages constants, replacing the single one that pointlessly used a variable. Signed-off-by:
-
- 07 May, 2014 2 commits
-
-
Emmanuel Grumbach authored
In case RFKILL is in KILL position, the NIC will issue an interrupt straight away. This interrupt won't be sent because it is masked in the hardware. But if our interrupt service routine is called for another reason (SHARED_IRQ), then we'll look at the interrupt cause and service it. This can cause bad things if we are not ready yet. Explicitly clean the interrupt cause register to make sure we won't service anything before we are ready to. Cc: <stable@vger.kernel.org> [3.14] Reported-and-tested-by:
Alexander Monakov <amonakov@gmail.com> Reviewed-by:
-
Eyal Shapira authored
After fixes to the rs algorithm reenable MCS9. Signed-off-by:
Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by:
-
- 06 May, 2014 11 commits
-
-
Emmanuel Grumbach authored
Since the declaration of iwl_mvm_fw_error_rxf_dump and iwl_mvm_fw_error_sram_dump is under ifdef CONFIG_IWLWIFI_DEBUGFS, do the same for their implementation. Signed-off-by: -
Emmanuel Grumbach authored
This allows mac80211 to flush the Tx queues before it sends critical management frames. Signed-off-by: -
Andrei Otcheretianski authored
Publish WIPHY_FLAG_HAS_CHANNEL_SWITCH if the fw supports newly introduced IWL_UCODE_TLV_API_CSA_FLOW. When CSA starts, save the switching vif inside mvm and during the CSA period configure fw with a new beacon after each beacon transmission in order to update the csa counters. Also, handle correctly the CSA unbind-bind flow which is triggered by mac80211 when the actual channel switch happens. Signed-off-by:
Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by:
-
Eliad Peller authored
Some ampdu actions change queues by direct target access. Since the bus is disabled in d0i3, make sure to exit d0i3 before handling these actions. Signed-off-by:
Arik Nemtsov <arik@wizery.com> Signed-off-by:
-
Johannes Berg authored
When a firmware error occurs, capture the last 32 commands (which are still in memory) in the error dump debugfs file. Signed-off-by:
-
David Spinadel authored
Currently the FW doesn't support sched scan while associated, Prevent it. Signed-off-by:
-
Johannes Berg authored
This variable always tracks a constant value (256) so there's no need to have it. Removing it simplifies code generation, reducing the .text size (by about 240 bytes on x86-64.) Signed-off-by:
-
Johannes Berg authored
The 'reset' argument is clearly a boolean, so use bool instead of u8 with 0/1 values. Signed-off-by:
-
Johannes Berg authored
If there's no LED on the system, it doesn't make a lot of sense to include close to 4k of LED-related code (mostly in mac80211), so instead of forcing LED support into the kernel, don't build iwlwifi/mac80211 LED support if there's no LED class support. Signed-off-by:
EliadX Peller <eliad@wizery.com> Signed-off-by:
-
Eran Harary authored
The old code checks if hw_section_num is valid while the right thing to do is to check if section[hw_section_num].data is valid. Signed-off-by:
-
Eran Harary authored
For family 8000 products, the driver should take the MAC address from the mac_override section and only if this section is empty it should take it from the HW section. Signed-off-by:
-
