The Intel's eASIC N5X (ARCH_N5X) architecture shares a lot with Agilex
(ARCH_AGILEX) so it uses the same socfpga_agilex.dtsi, with minor
changes.  Also the clock drivers are the same.

However the clock drivers won't be build without ARCH_AGILEX.  One could
assume that ARCH_N5X simply depends on ARCH_AGILEX but this was not
modeled in Kconfig.  In current stage the ARCH_N5X is simply
unbootable.

Add a separate Kconfig entry for clocks used by both ARCH_N5X and
ARCH_AGILEX so the necessary objects will be built if either of them is
selected.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

Pull ide fix from Jens Axboe:
 "This is a leftover fix from 5.11, where I forgot to ship it your way"

* tag 'ide-5.11-2021-02-28' of git://git.kernel.dk/linux-block:
  ide/falconide: Fix module unload

Merge tag 'kbuild-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix UNUSED_KSYMS_WHITELIST for Clang LTO

 - Make -s builds really silent irrespective of V= option

 - Fix build error when SUBLEVEL or PATCHLEVEL is empty

* tag 'kbuild-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Fix <linux/version.h> for empty SUBLEVEL or PATCHLEVEL again
  kbuild: make -s option take precedence over V=1
  ia64: remove redundant READELF from arch/ia64/Makefile
  kbuild: do not include include/config/auto.conf from adjust_autoksyms.sh
  kbuild: fix UNUSED_KSYMS_WHITELIST for Clang LTO
  kbuild: lto: add _mcount to list of used symbols

Pull arch/csky updates from Guo Ren:
 "Features:
   - add new memory layout 2.5G(user):1.5G(kernel)
   - add kmemleak support
   - reconstruct VDSO framework: add VDSO with GENERIC_GETTIMEOFDAY,
     GENERIC_TIME_VSYSCALL, HAVE_GENERIC_VDSO
   - add faulthandler_disabled() check
   - support (fix) swapon
   - add (fix) _PAGE_ACCESSED for default pgprot
   - abort uaccess retries upon fatal signal (from arm)

  Fixes and optimizations:
   - fix perf probe failure
   - fix show_regs doesn't contain regs->usp
   - remove custom asm/atomic.h implementation
   - fix barrier design
   - fix futex SMP implementation
   - fix asm/cmpxchg.h with correct ordering barrier
   - cleanup asm/spinlock.h
   - fix PTE global for 2.5:1.5 virtual memory
   - remove prologue of page fault handler in entry.S
   - fix TLB maintenance synchronization problem
   - add show_tlb for CPU_CK860 debug
   - fix FAULT_FLAG_XXX param for handle_mm_fault
   - fix update_mmu_cache called with user io mapping
   - fix do_page_fault parent irq status
   - fix a size determination in gpr_get()
   - pgtable.h: Coding convention
   - kprobe: Fix code in simulate without 'long'
   - fix pfn_valid error with wrong max_mapnr
   - use free_initmem_default() in free_initmem()
   - fix compile error"

* tag 'csky-for-linus-5.12-rc1' of git://github.com/c-sky/csky-linux: (30 commits)
  csky: Fixup compile error
  csky: use free_initmem_default() in free_initmem()
  csky: Fixup pfn_valid error with wrong max_mapnr
  csky: Add VDSO with GENERIC_GETTIMEOFDAY, GENERIC_TIME_VSYSCALL, HAVE_GENERIC_VDSO
  csky: kprobe: Fixup code in simulate without 'long'
  csky: Fixup swapon
  csky: pgtable.h: Coding convention
  csky: Fixup _PAGE_ACCESSED for default pgprot
  csky: remove unused including <linux/version.h>
  csky: Fix a size determination in gpr_get()
  csky: Reconstruct VDSO framework
  csky: mm: abort uaccess retries upon fatal signal
  csky: Sync riscv mm/fault.c for easy maintenance
  csky: Fixup do_page_fault parent irq status
  csky: Add faulthandler_disabled() check
  csky: Fixup update_mmu_cache called with user io mapping
  csky: Fixup FAULT_FLAG_XXX param for handle_mm_fault
  csky: Add show_tlb for CPU_CK860 debug
  csky: Fix TLB maintenance synchronization problem
  csky: Add kmemleak support
  ...

Pull more RISC-V updates from Palmer Dabbelt:
 "A pair of patches that slipped through the cracks:

   - enable CPU hotplug in the defconfigs

   - some cleanups to setup_bootmem

  There's also a single fix for some randconfig build failures:

   - make NUMA depend on SMP"

* tag 'riscv-for-linus-5.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Cleanup setup_bootmem()
  RISC-V: Enable CPU Hotplug in defconfigs
  RISC-V: Make NUMA depend on SMP

Pull more SCSI updates from James Bottomley:
 "This is a few driver updates (iscsi, mpt3sas) that were still in the
  staging queue when the merge window opened (all committed on or before
  8 Feb) and some small bug fixes which came in during the merge window
  (all committed on 22 Feb)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (30 commits)
  scsi: hpsa: Correct dev cmds outstanding for retried cmds
  scsi: sd: Fix Opal support
  scsi: target: tcmu: Fix memory leak caused by wrong uio usage
  scsi: target: tcmu: Move some functions without code change
  scsi: sd: sd_zbc: Don't pass GFP_NOIO to kvcalloc
  scsi: aic7xxx: Remove unused function pointer typedef ahc_bus_suspend/resume_t
  scsi: bnx2fc: Fix Kconfig warning & CNIC build errors
  scsi: ufs: Fix a duplicate dev quirk number
  scsi: aic79xx: Fix spelling of version
  scsi: target: core: Prevent underflow for service actions
  scsi: target: core: Add cmd length set before cmd complete
  scsi: iscsi: Drop session lock in iscsi_session_chkready()
  scsi: qla4xxx: Use iscsi_is_session_online()
  scsi: libiscsi: Reset max/exp cmdsn during recovery
  scsi: iscsi_tcp: Fix shost can_queue initialization
  scsi: libiscsi: Add helper to calculate max SCSI cmds per session
  scsi: libiscsi: Fix iSCSI host workq destruction
  scsi: libiscsi: Fix iscsi_task use after free()
  scsi: libiscsi: Drop taskqueuelock
  scsi: libiscsi: Fix iscsi_prep_scsi_cmd_pdu() error handling
  ...

Pull more xfs updates from Darrick Wong:
 "The most notable fix here prevents premature reuse of freed metadata
  blocks, and adding the ability to detect accidental nested
  transactions, which are not allowed here.

   - Restore a disused sysctl control knob that was inadvertently
     dropped during the merge window to avoid fstests regressions.

   - Don't speculatively release freed blocks from the busy list until
     we're actually allocating them, which fixes a rare log recovery
     regression.

   - Don't nest transactions when scanning for free space.

   - Add an idiot^Wmaintainer light to detect nested transactions. ;)"

* tag 'xfs-5.12-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: use current->journal_info for detecting transaction recursion
  xfs: don't nest transactions when scanning for eofblocks
  xfs: don't reuse busy extents on extent trim
  xfs: restore speculative_cow_prealloc_lifetime sysctl

Pull more block updates from Jens Axboe:
 "A few stragglers (and one due to me missing it originally), and fixes
  for changes in this merge window mostly. In particular:

   - blktrace cleanups (Chaitanya, Greg)

   - Kill dead blk_pm_* functions (Bart)

   - Fixes for the bio alloc changes (Christoph)

   - Fix for the partition changes (Christoph, Ming)

   - Fix for turning off iopoll with polled IO inflight (Jeffle)

   - nbd disconnect fix (Josef)

   - loop fsync error fix (Mauricio)

   - kyber update depth fix (Yang)

   - max_sectors alignment fix (Mikulas)

   - Add bio_max_segs helper (Matthew)"

* tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block: (21 commits)
  block: Add bio_max_segs
  blktrace: fix documentation for blk_fill_rw()
  block: memory allocations in bounce_clone_bio must not fail
  block: remove the gfp_mask argument to bounce_clone_bio
  block: fix bounce_clone_bio for passthrough bios
  block-crypto-fallback: use a bio_set for splitting bios
  block: fix logging on capacity change
  blk-settings: align max_sectors on "logical_block_size" boundary
  block: reopen the device in blkdev_reread_part
  block: don't skip empty device in in disk_uevent
  blktrace: remove debugfs file dentries from struct blk_trace
  nbd: handle device refs for DESTROY_ON_DISCONNECT properly
  kyber: introduce kyber_depth_updated()
  loop: fix I/O error on fsync() in detached loop devices
  block: fix potential IO hang when turning off io_poll
  block: get rid of the trace rq insert wrapper
  blktrace: fix blk_rq_merge documentation
  blktrace: fix blk_rq_issue documentation
  blktrace: add blk_fill_rwbs documentation comment
  block: remove superfluous param in blk_fill_rwbs()
  ...

Commit 78d3bb44 ("kbuild: Fix <linux/version.h> for empty SUBLEVEL
or PATCHLEVEL") fixed the build error for empty SUBLEVEL or PATCHLEVEL
by prepending a zero.

Commit 9b82f13e ("kbuild: clamp SUBLEVEL to 255") re-introduced
this issue.

This time, we cannot take the same approach because we have C code:

  #define LINUX_VERSION_PATCHLEVEL $(PATCHLEVEL)
  #define LINUX_VERSION_SUBLEVEL $(SUBLEVEL)

Replace empty SUBLEVEL/PATCHLEVEL with a zero.

Fixes: 9b82f13e ("kbuild: clamp SUBLEVEL to 255")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-and-tested-by: Sasha Levin <sashal@kernel.org>

'make -s' should be really silent. However, 'make -s V=1' prints noisy
log messages from some shell scripts.

Of course, such a combination is odd, but the build system needs to do
the right thing even if a user gives strange input.

If -s is given, KBUILD_VERBOSE should be forced to 0.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

READELF is defined by the top Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Commit cd195bc4 ("kbuild: split adjust_autoksyms.sh in two parts")
split out the code that needs include/config/auto.conf.

This script no longer needs to include include/config/auto.conf.

Fixes: cd195bc4 ("kbuild: split adjust_autoksyms.sh in two parts")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Commit fbe078d3 ("kbuild: lto: add a default list of used symbols")
does not work as expected if the .config file has already specified
CONFIG_UNUSED_KSYMS_WHITELIST="my/own/white/list" before enabling
CONFIG_LTO_CLANG.

So, the user-supplied whitelist and LTO-specific white list must be
independent of each other.

I refactored the shell script so CONFIG_MODVERSIONS and CONFIG_CLANG_LTO
handle whitelists in the same way.

Fixes: fbe078d3 ("kbuild: lto: add a default list of used symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>

Pull io_uring thread rewrite from Jens Axboe:
 "This converts the io-wq workers to be forked off the tasks in question
  instead of being kernel threads that assume various bits of the
  original task identity.

  This kills > 400 lines of code from io_uring/io-wq, and it's the worst
  part of the code. We've had several bugs in this area, and the worry
  is always that we could be missing some pieces for file types doing
  unusual things (recent /dev/tty example comes to mind, userfaultfd
  reads installing file descriptors is another fun one... - both of
  which need special handling, and I bet it's not the last weird oddity
  we'll find).

  With these identical workers, we can have full confidence that we're
  never missing anything. That, in itself, is a huge win. Outside of
  that, it's also more efficient since we're not wasting space and code
  on tracking state, or switching between different states.

  I'm sure we're going to find little things to patch up after this
  series, but testing has been pretty thorough, from the usual
  regression suite to production. Any issue that may crop up should be
  manageable.

  There's also a nice series of further reductions we can do on top of
  this, but I wanted to get the meat of it out sooner rather than later.
  The general worry here isn't that it's fundamentally broken. Most of
  the little issues we've found over the last week have been related to
  just changes in how thread startup/exit is done, since that's the main
  difference between using kthreads and these kinds of threads. In fact,
  if all goes according to plan, I want to get this into the 5.10 and
  5.11 stable branches as well.

  That said, the changes outside of io_uring/io-wq are:

   - arch setup, simple one-liner to each arch copy_thread()
     implementation.

   - Removal of net and proc restrictions for io_uring, they are no
     longer needed or useful"

* tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits)
  io-wq: remove now unused IO_WQ_BIT_ERROR
  io_uring: fix SQPOLL thread handling over exec
  io-wq: improve manager/worker handling over exec
  io_uring: ensure SQPOLL startup is triggered before error shutdown
  io-wq: make buffered file write hashed work map per-ctx
  io-wq: fix race around io_worker grabbing
  io-wq: fix races around manager/worker creation and task exit
  io_uring: ensure io-wq context is always destroyed for tasks
  arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread()
  io_uring: cleanup ->user usage
  io-wq: remove nr_process accounting
  io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS
  net: remove cmsg restriction from io_uring based send/recvmsg calls
  Revert "proc: don't allow async path resolution of /proc/self components"
  Revert "proc: don't allow async path resolution of /proc/thread-self components"
  io_uring: move SQPOLL thread io-wq forked worker
  io-wq: make io_wq_fork_thread() available to other users
  io-wq: only remove worker from free_list, if it was there
  io_uring: remove io_identity
  io_uring: remove any grabbing of context
  ...

Pull misc vfs updates from Al Viro:
 "Assorted stuff pile - no common topic here"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  whack-a-mole: don't open-code iminor/imajor
  9p: fix misuse of sscanf() in v9fs_stat2inode()
  audit_alloc_mark(): don't open-code ERR_CAST()
  fs/inode.c: make inode_init_always() initialize i_ino to 0
  vfs: don't unnecessarily clone write access for writable fds

Pull i2c fixes from Wolfram Sang:
 "Three more bugfixes and one revert. I accidently applied one patch too
  early"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: exynos5: Preserve high speed master code
  Revert "i2c: i2c-qcom-geni: Add shutdown callback for i2c"
  i2c: designware: Get right data length
  i2c: brcmstb: Fix brcmstd_send_i2c_cmd condition

: error: C++ style comments are not allowed in ISO C90
 // Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
 ^
error: (this will be reported only once per input file)
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>

The existing code is essentially
free_initmem_default()->free_reserved_area() without poisoning.

Note that existing code missed to update the managed page count of the
zone.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Tested-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

The max_mapnr is the number of PFNs, not absolute PFN offset.
Using set_max_mapnr API instead of setting the value directly.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>

It could help to reduce the latency of the time-related functions
in user space.

We have referenced arm's and riscv's implementation for the patch.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Vincent Chen <vincent.chen@sifive.com>
Cc: Arnd Bergmann <arnd@arndb.de>

The type of 'val' is 'unsigned long' in simulate_blz32, so 'val < 0'
can't be true.

Cast 'val' to 'long' here to determine branch token or not,

Fixup instructions: bnezad32, bhsz32, bhz32, blsz32, blz32

Link: https://lore.kernel.org/linux-csky/CAJF2gTQjKXR9gpo06WAWG1aquiT87mATiMGorXs6ChxOxoe90Q@mail.gmail.com/T/#tSigned-off-by: Guo Ren <guoren@linux.alibaba.com>
Co-developed-by: Menglong Dong <dong.menglong@zte.com.cn>
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>

Current csky's swappon is broken by wrong swap PTE entry format.
Now redesign the new format for abiv1 & abiv2 and make swappon +
zram work properly on csky machines.

C-SKY PTE has VALID, DIRTY to emulate PRESENT, READ, WRITE, EXEC
attributes. GLOBAL bit is shared by two pages in the same tlb
entry. So we need to keep GLOBAL, VALID, PRESENT zero in swp_pte.

To distinguish PAGE_NONE and swp_pte, we need to use an additional
bit (abiv1 is _PAGE_READ, abiv2 is _PAGE_WRITE).
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>

C-SKY page table attributes only have 'Dirty' and 'Valid' to
emulate 'PRESENT, READ, WRITE, EXEC, DIRTY, ACCESSED'.

This patch cleanup unnecessary definition.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>

Some randconfig builds fail with undefined references to _mcount
when CONFIG_TRIM_UNUSED_KSYMS is set:

ERROR: modpost: "_mcount" [drivers/tee/optee/optee.ko] undefined!
ERROR: modpost: "_mcount" [drivers/fsi/fsi-occ.ko] undefined!
ERROR: modpost: "_mcount" [drivers/fpga/dfl-pci.ko] undefined!

Since there is already a list of symbols that get generated at link
time, add this one as well.

Fixes: fbe078d3 ("kbuild: lto: add a default list of used symbols")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

After the following patches,

  commit de043da0 ("RISC-V: Fix usage of memblock_enforce_memory_limit")
  commit 1bd14a66 ("RISC-V: Remove any memblock representing unusable memory area")
  commit b10d6bca ("arch, drivers: replace for_each_membock() with for_each_mem_range()")

some logic is useless, kill the mem_start/start/end and unneeded code.
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

The CPU hotplug support has been tested on QEMU, Spike, and SiFive
Unleashed so let's enable it by default in RV32 and RV64 defconfigs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

In theory these are orthogonal, but in practice all NUMA systems are
SMP.  NUMA && !SMP doesn't build, everyone else is coupling them, and I
don't really see any value in supporting that configuration.

Fixes: 4f0e8eef ("riscv: Add numa support for riscv64 platform")
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: Atish Patra <atishp@atishpatra.org>
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by:  Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

It's often inconvenient to use BIO_MAX_PAGES due to min() requiring the
sign to be the same.  Introduce bio_max_segs() and change BIO_MAX_PAGES to
be unsigned to make it easier for the users.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull documentation fixes from Jonathan Corbet:
 "A handful of late-arriving documentation fixes, nothing all that
  notable"

* tag 'docs-5.12-2' of git://git.lwn.net/linux:
  docs: proc.rst: fix indentation warning
  Documentation: cgroup-v2: fix path to example BPF program
  docs: powerpc: Fix tables in syscall64-abi.rst
  Documentation: features: refresh feature list
  Documentation: features: remove c6x references
  docs: ABI: testing: ima_policy: Fixed missing bracket
  Fix unaesthetic indentation
  scripts: kernel-doc: fix array element capture in pointer-to-func parsing
  doc: use KCFLAGS instead of EXTRA_CFLAGS to pass flags from command line
  Documentation: proc.rst: add more about the 6 fields in loadavg

Pull OpenRISC updates from Stafford Horne:

 - Update for Litex SoC controller to support wider width registers as
   well as reset.

 - Refactor SMP code to use device tree to define possible cpus.

 - Update build including generating vmlinux.bin

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: Use devicetree to determine present cpus
  drivers/soc/litex: Add restart handler
  openrisc: add arch/openrisc/Kbuild
  drivers/soc/litex: make 'litex_[set|get]_reg()' methods private
  drivers/soc/litex: support 32-bit subregisters, 64-bit CPUs
  drivers/soc/litex: s/LITEX_REG_SIZE/LITEX_SUBREG_ALIGN/g
  drivers/soc/litex: separate MMIO from subregister offset calculation
  drivers/soc/litex: move generic accessors to litex.h
  openrisc: restart: Call common handlers before hanging
  openrisc: Add vmlinux.bin target

Pull more s390 updates from Vasily Gorbik:

 - Fix physical vs virtual confusion in some basic mm macros and
   routines. Caused by __pa == __va on s390 currently.

 - Get rid of on-stack cpu masks.

 - Add support for complete CPU counter set extraction.

 - Add arch_irq_work_raise implementation.

 - virtio-ccw revision and opcode fixes.

* tag 's390-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cpumf: Add support for complete counter set extraction
  virtio/s390: implement virtio-ccw revision 2 correctly
  s390/smp: implement arch_irq_work_raise()
  s390/topology: move cpumasks away from stack
  s390/smp: smp_emergency_stop() - move cpumask away from stack
  s390/smp: __smp_rescan_cpus() - move cpumask away from stack
  s390/smp: consolidate locking for smp_rescan()
  s390/mm: fix phys vs virt confusion in vmem_*() functions family
  s390/mm: fix phys vs virt confusion in pgtable allocation routines
  s390/mm: fix invalid __pa() usage in pfn_pXd() macros
  s390/mm: make pXd_deref() macros return a pointer
  s390/opcodes: rename selhhhr to selfhr

Pull cifs updates from Steve French:

 - improvements to mode bit conversion, chmod and chown when using
   cifsacl mount option

 - two new mount options for controlling attribute caching

 - improvements to crediting and reconnect, improved debugging

 - reconnect fix

 - add SMB3.1.1 dialect to default dialects for vers=3

* tag '5.12-smb3-part1' of git://git.samba.org/sfrench/cifs-2.6: (27 commits)
  cifs: update internal version number
  cifs: use discard iterator to discard unneeded network data more efficiently
  cifs: introduce helper for finding referral server to improve DFS target resolution
  cifs: check all path components in resolved dfs target
  cifs: fix DFS failover
  cifs: fix nodfs mount option
  cifs: fix handling of escaped ',' in the password mount argument
  cifs: Add new parameter "acregmax" for distinct file and directory metadata timeout
  cifs: convert revalidate of directories to using directory metadata cache timeout
  cifs: Add new mount parameter "acdirmax" to allow caching directory metadata
  cifs: If a corrupted DACL is returned by the server, bail out.
  cifs: minor simplification to smb2_is_network_name_deleted
  TCON Reconnect during STATUS_NETWORK_NAME_DELETED
  cifs: cleanup a few le16 vs. le32 uses in cifsacl.c
  cifs: Change SIDs in ACEs while transferring file ownership.
  cifs: Retain old ACEs when converting between mode bits and ACL.
  cifs: Fix cifsacl ACE mask for group and others.
  cifs: clarify hostname vs ip address in /proc/fs/cifs/DebugData
  cifs: change confusing field serverName (to ip_addr)
  cifs: Fix inconsistent IS_ERR and PTR_ERR
  ...

Pull more io_uring updates from Jens Axboe:
 "A collection of later fixes that we should get into this release:

   - Series of submission cleanups (Pavel)

   - A few fixes for issues from earlier this merge window (Pavel, me)

   - IOPOLL resubmission fix

   - task_work locking fix (Hao)"

* tag 'for-5.12/io_uring-2021-02-25' of git://git.kernel.dk/linux-block: (25 commits)
  Revert "io_uring: wait potential ->release() on resurrect"
  io_uring: fix locked_free_list caches_free()
  io_uring: don't attempt IO reissue from the ring exit path
  io_uring: clear request count when freeing caches
  io_uring: run task_work on io_uring_register()
  io_uring: fix leaving invalid req->flags
  io_uring: wait potential ->release() on resurrect
  io_uring: keep generic rsrc infra generic
  io_uring: zero ref_node after killing it
  io_uring: make the !CONFIG_NET helpers a bit more robust
  io_uring: don't hold uring_lock when calling io_run_task_work*
  io_uring: fail io-wq submission from a task_work
  io_uring: don't take uring_lock during iowq cancel
  io_uring: fail links more in io_submit_sqe()
  io_uring: don't do async setup for links' heads
  io_uring: do io_*_prep() early in io_submit_sqe()
  io_uring: split sqe-prep and async setup
  io_uring: don't submit link on error
  io_uring: move req link into submit_state
  io_uring: move io_init_req() into io_submit_sqe()
  ...

Merge branch 'stable/for-linus-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb

Pull swiotlb updates from Konrad Rzeszutek Wilk:
 "Two memory encryption related patches (SWIOTLB is enabled by default
  for AMD-SEV):

   - Add support for alignment so that NVME can properly work

   - Keep track of requested DMA buffers length, as underlaying hardware
     devices can trip SWIOTLB to bounce too much and crash the kernel

  And a tiny fix to use proper APIs in drivers"

* 'stable/for-linus-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: Validate bounce size in the sync/unmap path
  nvme-pci: set min_align_mask
  swiotlb: respect min_align_mask
  swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single
  swiotlb: refactor swiotlb_tbl_map_single
  swiotlb: clean up swiotlb_tbl_unmap_single
  swiotlb: factor out a nr_slots helper
  swiotlb: factor out an io_tlb_offset helper
  swiotlb: add a IO_TLB_SIZE define
  driver core: add a min_align_mask field to struct device_dma_parameters
  sdhci: stop poking into swiotlb internals

Pull LED updates from Pavel Machek:
 "Besides the usual fixes and new drivers, we are changing CLASS_FLASH
  to return success to make it easier to work with V4L2 stuff disabled,
  and we are getting rid of enum that should have been plain integer
  long time ago. I'm slightly nervous about potential warnings, but it
  needed to be fixed at some point"

* tag 'leds-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
  leds: lp50xx: Get rid of redundant explicit casting
  leds: lp50xx: Update headers block to reflect reality
  leds: lp50xx: Get rid of redundant check in lp50xx_enable_disable()
  leds: lp50xx: Reduce level of dereferences
  leds: lp50xx: Switch to new style i2c-driver probe function
  leds: lp50xx: Don't spam logs when probe is deferred
  leds: apu: extend support for PC Engines APU1 with newer firmware
  leds: flash: Fix multicolor no-ops registration by return 0
  leds: flash: Add flash registration with undefined CONFIG_LEDS_CLASS_FLASH
  leds: lgm: Add LED controller driver for LGM SoC
  dt-bindings: leds: Add bindings for Intel LGM SoC
  leds: led-core: Get rid of enum led_brightness
  leds: gpio: Set max brightness to 1
  leds: lm3533: Switch to using the new API kobj_to_dev()
  leds: ss4200: simplify the return expression of register_nasgpio_led()
  leds: Use DEVICE_ATTR_{RW, RO, WO} macros

Pull pcmcia update from Dominik Brodowski:
 "Improve the use of the kobj API in the core of the Linux PCMCIA
  subsystem"

* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  pcmcia: Switch to using the new API kobj_to_dev()

Pull RISC-V updates from Palmer Dabbelt:
 "A handful of new RISC-V related patches for this merge window:

   - A check to ensure drivers are properly using uaccess. This isn't
     manifesting with any of the drivers I'm currently using, but may
     catch errors in new drivers.

   - Some preliminary support for the FU740, along with the HiFive
     Unleashed it will appear on.

   - NUMA support for RISC-V, which involves making the arm64 code
     generic.

   - Support for kasan on the vmalloc region.

   - A handful of new drivers for the Kendryte K210, along with the DT
     plumbing required to boot on a handful of K210-based boards.

   - Support for allocating ASIDs.

   - Preliminary support for kernels larger than 128MiB.

   - Various other improvements to our KASAN support, including the
     utilization of huge pages when allocating the KASAN regions.

  We may have already found a bug with the KASAN_VMALLOC code, but it's
  passing my tests. There's a fix in the works, but that will probably
  miss the merge window.

* tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits)
  riscv: Improve kasan population by using hugepages when possible
  riscv: Improve kasan population function
  riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization
  riscv: Improve kasan definitions
  riscv: Get rid of MAX_EARLY_MAPPING_SIZE
  soc: canaan: Sort the Makefile alphabetically
  riscv: Disable KSAN_SANITIZE for vDSO
  riscv: Remove unnecessary declaration
  riscv: Add Canaan Kendryte K210 SD card defconfig
  riscv: Update Canaan Kendryte K210 defconfig
  riscv: Add Kendryte KD233 board device tree
  riscv: Add SiPeed MAIXDUINO board device tree
  riscv: Add SiPeed MAIX GO board device tree
  riscv: Add SiPeed MAIX DOCK board device tree
  riscv: Add SiPeed MAIX BiT board device tree
  riscv: Update Canaan Kendryte K210 device tree
  dt-bindings: add resets property to dw-apb-timer
  dt-bindings: fix sifive gpio properties
  dt-bindings: update sifive uart compatible string
  dt-bindings: update sifive clint compatible string
  ...

Pull arm64 fixes from Will Deacon:
 "The big one is a fix for the VHE enabling path during early boot,
  where the code enabling the MMU wasn't necessarily in the identity map
  of the new page-tables, resulting in a consistent crash with 64k
  pages. In fixing that, we noticed some missing barriers too, so we
  added those for the sake of architectural compliance.

  Other than that, just the usual merge window trickle. There'll be more
  to come, too.

  Summary:

   - Fix lockdep false alarm on resume-from-cpuidle path

   - Fix memory leak in kexec_file

   - Fix module linker script to work with GDB

   - Fix error code when trying to use uprobes with AArch32 instructions

   - Fix late VHE enabling with 64k pages

   - Add missing ISBs after TLB invalidation

   - Fix seccomp when tracing syscall -1

   - Fix stacktrace return code at end of stack

   - Fix inconsistent whitespace for pointer return values

   - Fix compiler warnings when building with W=1"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: stacktrace: Report when we reach the end of the stack
  arm64: ptrace: Fix seccomp of traced syscall -1 (NO_SYSCALL)
  arm64: Add missing ISB after invalidating TLB in enter_vhe
  arm64: Add missing ISB after invalidating TLB in __primary_switch
  arm64: VHE: Enable EL2 MMU from the idmap
  KVM: arm64: make the hyp vector table entries local
  arm64/mm: Fixed some coding style issues
  arm64: uprobe: Return EOPNOTSUPP for AARCH32 instruction probing
  kexec: move machine_kexec_post_load() to public interface
  arm64 module: set plt* section addresses to 0x0
  arm64: kexec_file: fix memory leakage in create_dtb() when fdt_open_into() fails
  arm64: spectre: Prevent lockdep splat on v4 mitigation enable path

Pull m68knommu update from Greg Ungerer:
 "Only a single change. NULL parameter check in the local ColdFire
  clocking code"

* tag 'm68knommu-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: let clk_enable() return immediately if clk is NULL