- 06 Sep, 2019 40 commits
-
-
Andrew Cooks authored
[ Upstream commit c7c06a15 ] Family 16h Model 30h SMBus controller needs the same port selection fix as described and fixed in commit 0fe16195 ("i2c: piix4: Fix SMBus port selection for AMD Family 17h chips") commit 6befa3fd ("i2c: piix4: Support alternative port selection register") also fixed the port selection for Hudson2, but unfortunately this is not the exact same device and the AMD naming and PCI Device IDs aren't particularly helpful here. The SMBus port selection register is common to the following Families and models, as documented in AMD's publicly available BIOS and Kernel Developer Guides: 50742 - Family 15h Model 60h-6Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) 55072 - Family 15h Model 70h-7Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) 52740 - Family 16h Model 30h-3Fh (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) The Hudson2 PCI Device ID (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) is shared between Bolton FCH and Family 16h Model 30h, but the location of the SmBus0Sel port selection bits are different: 51192 - Bolton Register Reference Guide We distinguish between Bolton and Family 16h Model 30h using the PCI Revision ID: Bolton is device 0x780b, revision 0x15 Family 16h Model 30h is device 0x780b, revision 0x1F Family 15h Model 60h and 70h are both device 0x790b, revision 0x4A. The following additional public AMD BKDG documents were checked and do not share the same port selection register: 42301 - Family 15h Model 00h-0Fh doesn't mention any 42300 - Family 15h Model 10h-1Fh doesn't mention any 49125 - Family 15h Model 30h-3Fh doesn't mention any 48751 - Family 16h Model 00h-0Fh uses the previously supported index register SB800_PIIX4_PORT_IDX_ALT at 0x2e Signed-off-by:
Andrew Cooks <andrew.cooks@opengear.com> Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org [v4.6+] Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Trond Myklebust authored
[ Upstream commit eb2c50da ] If the attempt to resend the I/O results in no bytes being read/written, we must ensure that we report the error. Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Fixes: 0a00b77b ("nfs: mirroring support for direct io") Cc: stable@vger.kernel.org # v3.20+ Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit df3accb8 ] Allow the caller to pass error information when cleaning up a failed I/O request so that we can conditionally take action to cancel the request altogether if the error turned out to be fatal. Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit f4340e93 ] If the attempt to resend the pages fails, we need to ensure that we clean up those pages that were not transmitted. Fixes: d600ad1f ("NFS41: pop some layoutget errors to application") Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 078b5fd9 ] In several places we're just moving the struct nfs_page from one list to another by first removing from the existing list, then adding to the new one. Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 82e40f55 ] A guest is not allowed to inject a SGI (or clear its pending state) by writing to GICD_ISPENDR0 (resp. GICD_ICPENDR0), as these bits are defined as WI (as per ARM IHI 0048B 4.3.7 and 4.3.8). Make sure we correctly emulate the architecture. Fixes: 96b29800 ("KVM: arm/arm64: vgic-new: Add PENDING registers handlers") Cc: stable@vger.kernel.org # 4.7+ Reported-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Heyi Guo authored
[ Upstream commit d4a8061a ] If the ap_list is longer than 256 entries, merge_final() in list_sort() will call the comparison callback with the same element twice, causing a deadlock in vgic_irq_cmp(). Fix it by returning early when irqa == irqb. Cc: stable@vger.kernel.org # 4.7+ Fixes: 8e444745 ("KVM: arm/arm64: vgic-new: Add IRQ sorting") Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
Heyi Guo <guoheyi@huawei.com> [maz: massaged commit log and patch, added Fixes and Cc-stable] Signed-off-by:
-
Alexey Kardashevskiy authored
[ Upstream commit ddfd151f ] H_PUT_TCE_INDIRECT handlers receive a page with up to 512 TCEs from a guest. Although we verify correctness of TCEs before we do anything with the existing tables, there is a small window when a check in kvmppc_tce_validate might pass and right after that the guest alters the page of TCEs, causing an early exit from the handler and leaving srcu_read_lock(&vcpu->kvm->srcu) (virtual mode) or lock_rmap(rmap) (real mode) locked. This fixes the bug by jumping to the common exit code with an appropriate unlock. Cc: stable@vger.kernel.org # v4.11+ Fixes: 121f80ba ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO") Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Denis Kenzior authored
commit f8b43c5c upstream. The noencrypt flag was intended to be set if the "frame was received unencrypted" according to include/uapi/linux/nl80211.h. However, the current behavior is opposite of this. Cc: stable@vger.kernel.org Fixes: 018f6fbf ("mac80211: Send control port frames over nl80211") Signed-off-by:
Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190827224120.14545-3-denkenz@gmail.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Denis Kenzior authored
commit c8a41c6a upstream. In ieee80211_deliver_skb_to_local_stack intercepts EAPoL frames if mac80211 is configured to do so and forwards the contents over nl80211. During this process some additional data is also forwarded, including whether the frame was received encrypted or not. Unfortunately just prior to the call to ieee80211_deliver_skb_to_local_stack, skb->cb is cleared, resulting in incorrect data being exposed over nl80211. Fixes: 018f6fbf ("mac80211: Send control port frames over nl80211") Cc: stable@vger.kernel.org Signed-off-by:
-
Johannes Berg authored
commit 5fd2f91a upstream. If TDLS station addition is rejected, the sta memory is leaked. Avoid this by moving the check before the allocation. Cc: stable@vger.kernel.org Fixes: 7ed52853 ("mac80211: don't initiate TDLS connection if station is not associated to AP") Link: https://lore.kernel.org/r/20190801073033.7892-1-johannes@sipsolutions.netSigned-off-by:
-
Hodaszi, Robert authored
commit 0d31d4db upstream. This reverts commit 96cce12f ("cfg80211: fix processing world regdomain when non modular"). Re-triggering a reg_process_hint with the last request on all events, can make the regulatory domain fail in case of multiple WiFi modules. On slower boards (espacially with mdev), enumeration of the WiFi modules can end up in an intersected regulatory domain, and user cannot set it with 'iw reg set' anymore. This is happening, because: - 1st module enumerates, queues up a regulatory request - request gets processed by __reg_process_hint_driver(): - checks if previous was set by CORE -> yes - checks if regulator domain changed -> yes, from '00' to e.g. 'US' -> sends request to the 'crda' - 2nd module enumerates, queues up a regulator request (which triggers the reg_todo() work) - reg_todo() -> reg_process_pending_hints() sees, that the last request is not processed yet, so it tries to process it again. __reg_process_hint driver() will run again, and: - checks if the last request's initiator was the core -> no, it was the driver (1st WiFi module) - checks, if the previous initiator was the driver -> yes - checks if the regulator domain changed -> yes, it was '00' (set by core, and crda call did not return yet), and should be changed to 'US' ------> __reg_process_hint_driver calls an intersect Besides, the reg_process_hint call with the last request is meaningless since the crda call has a timeout work. If that timeout expires, the first module's request will lost. Cc: stable@vger.kernel.org Fixes: 96cce12f ("cfg80211: fix processing world regdomain when non modular") Signed-off-by:
Robert Hodaszi <robert.hodaszi@digi.com> Link: https://lore.kernel.org/r/20190614131600.GA13897@a1-hrSigned-off-by:
-
Gary R Hook authored
commit 5871cd93 upstream. If a CCP is unconfigured (e.g. there are no available queues) then there will be no data structures allocated for the device. Thus, we must check for validity of a pointer before trying to access structure members. Fixes: 720419f0 ("crypto: ccp - Introduce the AMD Secure Processor device") Cc: <stable@vger.kernel.org> Signed-off-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Nadav Amit authored
commit ba03a9bb upstream. Francois reported that VMware balloon gets stuck after a balloon reset, when the VMCI doorbell is removed. A similar error can occur when the balloon driver is removed with the following splat: [ 1088.622000] INFO: task modprobe:3565 blocked for more than 120 seconds. [ 1088.622035] Tainted: G W 5.2.0 #4 [ 1088.622087] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1088.622205] modprobe D 0 3565 1450 0x00000000 [ 1088.622210] Call Trace: [ 1088.622246] __schedule+0x2a8/0x690 [ 1088.622248] schedule+0x2d/0x90 [ 1088.622250] schedule_timeout+0x1d3/0x2f0 [ 1088.622252] wait_for_completion+0xba/0x140 [ 1088.622320] ? wake_up_q+0x80/0x80 [ 1088.622370] vmci_resource_remove+0xb9/0xc0 [vmw_vmci] [ 1088.622373] vmci_doorbell_destroy+0x9e/0xd0 [vmw_vmci] [ 1088.622379] vmballoon_vmci_cleanup+0x6e/0xf0 [vmw_balloon] [ 1088.622381] vmballoon_exit+0x18/0xcc8 [vmw_balloon] [ 1088.622394] __x64_sys_delete_module+0x146/0x280 [ 1088.622408] do_syscall_64+0x5a/0x130 [ 1088.622410] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1088.622415] RIP: 0033:0x7f54f62791b7 [ 1088.622421] Code: Bad RIP value. [ 1088.622421] RSP: 002b:00007fff2a949008 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 1088.622426] RAX: ffffffffffffffda RBX: 000055dff8b55d00 RCX: 00007f54f62791b7 [ 1088.622426] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055dff8b55d68 [ 1088.622427] RBP: 000055dff8b55d00 R08: 00007fff2a947fb1 R09: 0000000000000000 [ 1088.622427] R10: 00007f54f62f5cc0 R11: 0000000000000206 R12: 000055dff8b55d68 [ 1088.622428] R13: 0000000000000001 R14: 000055dff8b55d68 R15: 00007fff2a94a3f0 The cause for the bug is that when the "delayed" doorbell is invoked, it takes a reference on the doorbell entry and schedules work that is supposed to run the appropriate code and drop the doorbell entry reference. The code ignores the fact that if the work is already queued, it will not be scheduled to run one more time. As a result one of the references would not be dropped. When the code waits for the reference to get to zero, during balloon reset or module removal, it gets stuck. Fix it. Drop the reference if schedule_work() indicates that the work is already queued. Note that this bug got more apparent (or apparent at all) due to commit ce664331 ("vmw_balloon: VMCI_DOORBELL_SET does not check status"). Fixes: 83e2ec76 ("VMCI: doorbell implementation.") Reported-by:
Francois Rigault <rigault.francois@gmail.com> Cc: Jorgen Hansen <jhansen@vmware.com> Cc: Adit Ranadive <aditr@vmware.com> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Vishnu DASA <vdasa@vmware.com> Cc: stable@vger.kernel.org Signed-off-by:
Nadav Amit <namit@vmware.com> Reviewed-by:
Vishnu Dasa <vdasa@vmware.com> Link: https://lore.kernel.org/r/20190820202638.49003-1-namit@vmware.comSigned-off-by:
-
John Garry authored
commit 10e62b47 upstream. The original driver author seemed to be under the impression that a driver cannot be removed if it does not have a .remove method. Or maybe if it is a built-in platform driver. This is not true. This crash can be created: root@ubuntu:/sys/bus/platform/drivers/hisi-lpc# echo HISI0191\:00 > unbind root@ubuntu:/sys/bus/platform/drivers/hisi-lpc# ipmitool raw 6 1 Unable to handle kernel paging request at virtual address ffff000010035010 Mem abort info: ESR = 0x96000047 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000047 CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000000118b000 [ffff000010035010] pgd=0000041ffbfff003, pud=0000041ffbffe003, pmd=0000041ffbffd003, pte=0000000000000000 Internal error: Oops: 96000047 [#1] PREEMPT SMP Modules linked in: CPU: 17 PID: 1473 Comm: ipmitool Not tainted 5.2.0-rc5-00003-gf68c53b414a3-dirty #198 Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018 pstate: 20000085 (nzCv daIf -PAN -UAO) pc : hisi_lpc_target_in+0x7c/0x120 lr : hisi_lpc_target_in+0x70/0x120 sp : ffff00001efe3930 x29: ffff00001efe3930 x28: ffff841f9f599200 x27: 0000000000000002 x26: 0000000000000000 x25: 0000000000000080 x24: 00000000000000e4 x23: 0000000000000000 x22: 0000000000000064 x21: ffff801fb667d280 x20: 0000000000000001 x19: ffff00001efe39ac x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff841febe60340 x7 : ffff801fb55c52e8 x6 : 0000000000000000 x5 : 0000000000ffc0e3 x4 : 0000000000000001 x3 : ffff801fb667d280 x2 : 0000000000000001 x1 : ffff000010035010 x0 : ffff000010035000 Call trace: hisi_lpc_target_in+0x7c/0x120 hisi_lpc_comm_in+0x88/0x98 logic_inb+0x5c/0xb8 port_inb+0x18/0x20 bt_event+0x38/0x808 smi_event_handler+0x4c/0x5a0 check_start_timer_thread.part.4+0x40/0x58 sender+0x78/0x88 smi_send.isra.6+0x94/0x108 i_ipmi_request+0x2c4/0x8f8 ipmi_request_settime+0x124/0x160 handle_send_req+0x19c/0x208 ipmi_ioctl+0x2c0/0x990 do_vfs_ioctl+0xb8/0x8f8 ksys_ioctl+0x80/0xb8 __arm64_sys_ioctl+0x1c/0x28 el0_svc_common.constprop.0+0x64/0x160 el0_svc_handler+0x28/0x78 el0_svc+0x8/0xc Code: 941d1511 aa0003f9 f94006a0 91004001 (b9000034) ---[ end trace aa842b86af7069e4 ]--- The problem here is that the host goes away but the associated logical PIO region remains registered, as do the children devices. Fix by adding a .remove method to tidy-up by removing the child devices and unregistering the logical PIO region. Cc: stable@vger.kernel.org Fixes: adf38bb0 ("HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings") Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Wei Xu <xuwei5@hisilicon.com> Signed-off-by:
-
John Garry authored
commit 1b15a563 upstream. If, after registering a logical PIO range, the driver probe later fails, the logical PIO range memory will be released automatically. This causes an issue, in that the logical PIO range is not unregistered and the released range memory may be later referenced. Fix by unregistering the logical PIO range. And since we now unregister the logical PIO range for probe failure, avoid the special ordering of setting logical PIO range ops, which was the previous (poor) attempt at a safeguard against this. Cc: stable@vger.kernel.org Fixes: adf38bb0 ("HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings") Signed-off-by:
-
Lyude Paul authored
commit 32f0a982 upstream. Currently, we don't call dma_set_max_seg_size() for i915 because we intentionally do not limit the segment length that the device supports. However, this results in a warning being emitted if we try to map anything larger than SZ_64K on a kernel with CONFIG_DMA_API_DEBUG_SG enabled: [ 7.751926] DMA-API: i915 0000:00:02.0: mapping sg segment longer than device claims to support [len=98304] [max=65536] [ 7.751934] WARNING: CPU: 5 PID: 474 at kernel/dma/debug.c:1220 debug_dma_map_sg+0x20f/0x340 This was originally brought up on https://bugs.freedesktop.org/show_bug.cgi?id=108517 , and the consensus there was it wasn't really useful to set a limit (and that dma-debug isn't really all that useful for i915 in the first place). Unfortunately though, CONFIG_DMA_API_DEBUG_SG is enabled in the debug configs for various distro kernels. Since a WARN_ON() will disable automatic problem reporting (and cause any CI with said option enabled to start complaining), we really should just fix the problem. Note that as me and Chris Wilson discussed, the other solution for this would be to make DMA-API not make such assumptions when a driver hasn't explicitly set a maximum segment size. But, taking a look at the commit which originally introduced this behavior, commit 78c47830 ("dma-debug: check scatterlist segments"), there is an explicit mention of this assumption and how it applies to devices with no segment size: Conversely, devices which are less limited than the rather conservative defaults, or indeed have no limitations at all (e.g. GPUs with their own internal MMU), should be encouraged to set appropriate dma_parms, as they may get more efficient DMA mapping performance out of it. So unless there's any concerns (I'm open to discussion!), let's just follow suite and call dma_set_max_seg_size() with UINT_MAX as our limit to silence any warnings. Changes since v3: * Drop patch for enabling CONFIG_DMA_API_DEBUG_SG in CI. It looks like just turning it on causes the kernel to spit out bogus WARN_ONs() during some igt tests which would otherwise require teaching igt to disable the various DMA-API debugging options causing this. This is too much work to be worth it, since DMA-API debugging is useless for us. So, we'll just settle with this single patch to squelch WARN_ONs() during driver load for users that have CONFIG_DMA_API_DEBUG_SG turned on for some reason. * Move dma_set_max_seg_size() call into i915_driver_hw_probe() - Chris Wilson Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v4.18+ Link: https://patchwork.freedesktop.org/patch/msgid/20190823205251.14298-1-lyude@redhat.com (cherry picked from commit acd674af) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Xiong Zhang authored
commit 0a3dfbb5 upstream. The following call trace may exist in linux guest dmesg when guest i915 driver is unloaded. [ 90.776610] [drm:vgt_deballoon_space.isra.0 [i915]] deballoon space: range [0x0 - 0x0] 0 KiB. [ 90.776621] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c0 [ 90.776691] IP: drm_mm_remove_node+0x4d/0x320 [drm] [ 90.776718] PGD 800000012c7d0067 P4D 800000012c7d0067 PUD 138e4c067 PMD 0 [ 90.777091] task: ffff9adab60f2f00 task.stack: ffffaf39c0fe0000 [ 90.777142] RIP: 0010:drm_mm_remove_node+0x4d/0x320 [drm] [ 90.777573] Call Trace: [ 90.777653] intel_vgt_deballoon+0x4c/0x60 [i915] [ 90.777729] i915_ggtt_cleanup_hw+0x121/0x190 [i915] [ 90.777792] i915_driver_unload+0x145/0x180 [i915] [ 90.777856] i915_pci_remove+0x15/0x20 [i915] [ 90.777890] pci_device_remove+0x3b/0xc0 [ 90.777916] device_release_driver_internal+0x157/0x220 [ 90.777945] driver_detach+0x39/0x70 [ 90.777967] bus_remove_driver+0x51/0xd0 [ 90.777990] pci_unregister_driver+0x23/0x90 [ 90.778019] SyS_delete_module+0x1da/0x240 [ 90.778045] entry_SYSCALL_64_fastpath+0x24/0x87 [ 90.778072] RIP: 0033:0x7f34312af067 [ 90.778092] RSP: 002b:00007ffdea3da0d8 EFLAGS: 00000206 [ 90.778297] RIP: drm_mm_remove_node+0x4d/0x320 [drm] RSP: ffffaf39c0fe3dc0 [ 90.778344] ---[ end trace f4b1bc8305fc59dd ]--- Four drm_mm_node are used to reserve guest ggtt space, but some of them may be skipped and not initialised due to space constraints in intel_vgt_balloon(). If drm_mm_remove_node() is called with uninitialized drm_mm_node, the above call trace occurs. This patch check drm_mm_node's validity before calling drm_mm_remove_node(). Fixes: ff8f7975("drm/i915: return the correct usable aperture size under gvt environment") Cc: stable@vger.kernel.org Signed-off-by:
Xiong Zhang <xiong.y.zhang@intel.com> Acked-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by:
-
Kai-Heng Feng authored
commit 317a3aae upstream. Needs ATPX rather than _PR3 to really turn off the dGPU. This can save ~5W when dGPU is runtime-suspended. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
John Garry authored
commit b884e2de upstream. Add a function to unregister a logical PIO range. Logical PIO space can still be leaked when unregistering certain LOGIC_PIO_CPU_MMIO regions, but this acceptable for now since there are no callers to unregister LOGIC_PIO_CPU_MMIO regions, and the logical PIO region allocation scheme would need significant work to improve this. Cc: stable@vger.kernel.org Signed-off-by:
-
John Garry authored
commit 0a27142b upstream. The code was originally written to not support unregistering logical PIO regions. To accommodate supporting unregistering logical PIO regions, subtly modify LOGIC_PIO_CPU_MMIO region registration code, such that the "end" of the registered regions is the "end" of the last region, and not the sum of the sizes of all the registered regions. Cc: stable@vger.kernel.org Signed-off-by:
-
John Garry authored
commit 06709e81 upstream. The traversing of io_range_list with list_for_each_entry_rcu() is not properly protected by rcu_read_lock() and rcu_read_unlock(), so add them. These functions mark the critical section scope where the list is protected for the reader, it cannot be "reclaimed". Any updater - in this case, the logical PIO registration functions - cannot update the list until the reader exits this critical section. In addition, the list traversing used in logic_pio_register_range() does not need to use the rcu variant. This is because we are already using io_range_mutex to guarantee mutual exclusion from mutating the list. Cc: stable@vger.kernel.org Fixes: 031e3601 ("lib: Add generic PIO mapping method") Signed-off-by:
-
Eddie James authored
commit 8919dfcb upstream. The scom driver currently fails out of operations if certain system errors are flagged in the status register; system checkstop, special attention, or recoverable error. These errors won't impact the ability of the scom engine to perform operations, so the driver should continue under these conditions. Also, don't do a PIB reset for these conditions, since it won't help. Fixes: 6b293258 ("fsi: scom: Major overhaul") Signed-off-by:
Eddie James <eajames@linux.ibm.com> Cc: stable <stable@vger.kernel.org> Acked-by:
Jeremy Kerr <jk@ozlabs.org> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20190827041249.13381-1-jk@ozlabs.orgSigned-off-by:
-
Colin Ian King authored
commit a684d8fd upstream. There appears to be a typo in the comparison of pdo_max_voltage[i] with the previous value, currently it is checking against the array pdo_min_voltage rather than pdo_max_voltage. I believe this is a typo. Fix this. Addresses-Coverity: ("Copy-paste error") Fixes: 5007e1b5 ("typec: tcpm: Validate source and sink caps") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20190822135212.10195-1-colin.king@canonical.comSigned-off-by:
-
Alexander Shishkin authored
commit 9c78255f upstream. This adds support for the Trace Hub in Tiger Lake PCH. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: stable@vger.kernel.org # v4.14+ Link: https://lore.kernel.org/r/20190821074955.3925-5-alexander.shishkin@linux.intel.comSigned-off-by:
-
Alexander Shishkin authored
commit 164eb56e upstream. Add support for the Trace Hub in another Lewisburg PCH. Signed-off-by:
-
Ding Xiang authored
commit 961b6ffe upstream. In the error path of stm_source_register_device(), the kfree is unnecessary, as the put_device() before it ends up calling stm_source_device_release() to free stm_source_device, leading to a double free at the outer kfree() call. Remove it. Signed-off-by:
Ding Xiang <dingxiang@cmss.chinamobile.com> Signed-off-by:
-
Ulf Hansson authored
commit 72741084 upstream. The OCR register defines the supported range of VDD voltages for SD cards. However, it has turned out that some SD cards reports an invalid voltage range, for example having bit7 set. When a host supports MMC_CAP2_FULL_PWR_CYCLE and some of the voltages from the invalid VDD range, this triggers the core to run a power cycle of the card to try to initialize it at the lowest common supported voltage. Obviously this fails, since the card can't support it. Let's fix this problem, by clearing invalid bits from the read OCR register for SD cards, before proceeding with the VDD voltage negotiation. Cc: stable@vger.kernel.org Reported-by:
Philip Langdale <philipl@overt.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by:
Manuel Presnitz <mail@mpy.de> Signed-off-by:
-
Eugen Hristev authored
commit 7871aa60 upstream. HS200 is not implemented in the driver, but the controller claims it through caps. Remove it via a quirk, to make sure the mmc core do not try to enable HS200, as it causes the eMMC initialization to fail. Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Fixes: bb5f8ea4 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by:
-
Tomas Winkler authored
commit 587f1740 upstream. Add Tiger Lake Point device ID for TGP LP. Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190819103210.32748-1-tomas.winkler@intel.comSigned-off-by:
-
Kai-Heng Feng authored
commit 1902a01e upstream. Auto-delink requires writing special registers to ums-realtek devices. Unconditionally enable auto-delink may break newer devices. So only enable auto-delink by default for the original three IDs, 0x0138, 0x0158 and 0x0159. Realtek is working on a patch to properly support auto-delink for other IDs. BugLink: https://bugs.launchpad.net/bugs/1838886Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190827173450.13572-2-kai.heng.feng@canonical.comSigned-off-by:
-
Kai-Heng Feng authored
commit f6445b6b upstream. The option named "auto_delink_en" is a bit misleading, as setting it to false doesn't really disable auto-delink but let auto-delink be firmware controlled. Update the description to reflect the real usage of this parameter. Signed-off-by:
-
Geert Uytterhoeven authored
commit 636bd02a upstream. It's spelled "renesas", not "renensas". Due to this typo, RZ/G1M and RZ/G1N were not covered by the check. Fixes: 2dc240a3 ("usb: host: xhci: rcar: retire use of xhci_plat_type_is()") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable <stable@vger.kernel.org> Reviewed-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20190827125112.12192-1-geert+renesas@glider.beSigned-off-by:
-
Yoshihiro Shimoda authored
commit a349b95d upstream. This patch fixes an issue that the following error is possible to happen when ohci hardware causes an interruption and the system is shutting down at the same time. [ 34.851754] usb 2-1: USB disconnect, device number 2 [ 35.166658] irq 156: nobody cared (try booting with the "irqpoll" option) [ 35.173445] CPU: 0 PID: 22 Comm: kworker/0:1 Not tainted 5.3.0-rc5 #85 [ 35.179964] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 35.187886] Workqueue: usb_hub_wq hub_event [ 35.192063] Call trace: [ 35.194509] dump_backtrace+0x0/0x150 [ 35.198165] show_stack+0x14/0x20 [ 35.201475] dump_stack+0xa0/0xc4 [ 35.204785] __report_bad_irq+0x34/0xe8 [ 35.208614] note_interrupt+0x2cc/0x318 [ 35.212446] handle_irq_event_percpu+0x5c/0x88 [ 35.216883] handle_irq_event+0x48/0x78 [ 35.220712] handle_fasteoi_irq+0xb4/0x188 [ 35.224802] generic_handle_irq+0x24/0x38 [ 35.228804] __handle_domain_irq+0x5c/0xb0 [ 35.232893] gic_handle_irq+0x58/0xa8 [ 35.236548] el1_irq+0xb8/0x180 [ 35.239681] __do_softirq+0x94/0x23c [ 35.243253] irq_exit+0xd0/0xd8 [ 35.246387] __handle_domain_irq+0x60/0xb0 [ 35.250475] gic_handle_irq+0x58/0xa8 [ 35.254130] el1_irq+0xb8/0x180 [ 35.257268] kernfs_find_ns+0x5c/0x120 [ 35.261010] kernfs_find_and_get_ns+0x3c/0x60 [ 35.265361] sysfs_unmerge_group+0x20/0x68 [ 35.269454] dpm_sysfs_remove+0x2c/0x68 [ 35.273284] device_del+0x80/0x370 [ 35.276683] hid_destroy_device+0x28/0x60 [ 35.280686] usbhid_disconnect+0x4c/0x80 [ 35.284602] usb_unbind_interface+0x6c/0x268 [ 35.288867] device_release_driver_internal+0xe4/0x1b0 [ 35.293998] device_release_driver+0x14/0x20 [ 35.298261] bus_remove_device+0x110/0x128 [ 35.302350] device_del+0x148/0x370 [ 35.305832] usb_disable_device+0x8c/0x1d0 [ 35.309921] usb_disconnect+0xc8/0x2d0 [ 35.313663] hub_event+0x6e0/0x1128 [ 35.317146] process_one_work+0x1e0/0x320 [ 35.321148] worker_thread+0x40/0x450 [ 35.324805] kthread+0x124/0x128 [ 35.328027] ret_from_fork+0x10/0x18 [ 35.331594] handlers: [ 35.333862] [<0000000079300c1d>] usb_hcd_irq [ 35.338126] [<0000000079300c1d>] usb_hcd_irq [ 35.342389] Disabling IRQ #156 ohci_shutdown() disables all the interrupt and rh_state is set to OHCI_RH_HALTED. In other hand, ohci_irq() is possible to enable OHCI_INTR_SF and OHCI_INTR_MIE on ohci_irq(). Note that OHCI_INTR_SF is possible to be set by start_ed_unlink() which is called: ohci_irq() -> process_done_list() -> takeback_td() -> start_ed_unlink() So, ohci_irq() has the following condition, the issue happens by &ohci->regs->intrenable = OHCI_INTR_MIE | OHCI_INTR_SF and ohci->rh_state = OHCI_RH_HALTED: /* interrupt for some other device? */ if (ints == 0 || unlikely(ohci->rh_state == OHCI_RH_HALTED)) return IRQ_NOTMINE; To fix the issue, ohci_shutdown() holds the spin lock while disabling the interruption and changing the rh_state flag to prevent reenable the OHCI_INTR_MIE unexpectedly. Note that io_watchdog_func() also calls the ohci_shutdown() and it already held the spin lock, so that the patch makes a new function as _ohci_shutdown(). This patch is inspired by a Renesas R-Car Gen3 BSP patch from Tho Vu. Signed-off-by:
-
Peter Chen authored
commit cbe85c88 upstream. After _gadget_stop_activity is executed, we can consider the hardware operation for gadget has finished, and the udc can be stopped and enter low power mode. So, any later hardware operations (from usb_ep_ops APIs or usb_gadget_ops APIs) should be considered invalid, any deinitializatons has been covered at _gadget_stop_activity. I meet this problem when I plug out usb cable from PC using mass_storage gadget, my callstack like: vbus interrupt->.vbus_session-> composite_disconnect ->pm_runtime_put_sync(&_gadget->dev), the composite_disconnect will call fsg_disable, but fsg_disable calls usb_ep_disable using async way, there are register accesses for usb_ep_disable. So sometimes, I get system hang due to visit register without clock, sometimes not. The Linux Kernel USB maintainer Alan Stern suggests this kinds of solution. See: http://marc.info/?l=linux-usb&m=138541769810983&w=2. Cc: <stable@vger.kernel.org> #v4.9+ Signed-off-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20190820020503.27080-2-peter.chen@nxp.comSigned-off-by:
-
Schmid, Carsten authored
commit 76da906a upstream. Using managed device resources in usb_hcd_pci_probe() allows devm usage for resource subranges, such as the mmio resource for the platform device created to control host/device mode mux, which is a xhci extended capability, and sits inside the xhci mmio region. If managed device resources are not used then "parent" resource is released before subrange at driver removal as .remove callback is called before the devres list of resources for this device is walked and released. This has been observed with the xhci extended capability driver causing a use-after-free which is now fixed. An additional nice benefit is that error handling on driver initialisation is simplified much. Signed-off-by:
Carsten Schmid <carsten_schmid@mentor.com> Tested-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Fixes: fa31b3cb ("xhci: Add Intel extended cap / otg phy mux handling") Cc: <stable@vger.kernel.org> # v4.19+ Link: https://lore.kernel.org/r/1566569488679.31808@mentor.comSigned-off-by:
-
Oliver Neukum authored
commit 1426bd2c upstream. In case of a disconnect an ongoing flush() has to be made fail. Nevertheless we cannot be sure that any pending URB has already finished, so although they will never succeed, they still must not be touched. The clean solution for this is to check for WDM_IN_USE and WDM_DISCONNECTED in flush(). There is no point in ever clearing WDM_IN_USE, as no further writes make sense. The issue is as old as the driver. Fixes: afba937e ("USB: CDC WDM driver") Reported-by: syzbot+d232cca6ec42c2edb3fc@syzkaller.appspotmail.com Signed-off-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190827103436.21143-1-oneukum@suse.comSigned-off-by:
-
Henk van der Laan authored
commit 08d676d1 upstream. Revision 0x0117 suffers from an identical issue to earlier revisions, therefore it should be added to the quirks list. Signed-off-by:
Henk van der Laan <opensource@henkvdlaan.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190816200847.21366-1-opensource@henkvdlaan.comSigned-off-by:
-
Steven Rostedt (VMware) authored
commit 372e0d01 upstream. The race between adding a function probe and reading the probes that exist is very subtle. It needs a comment. Also, the issue can also happen if the probe has has the EMPTY_HASH as its func_hash. Cc: stable@vger.kernel.org Fixes: 7b60f3d8 ("ftrace: Dynamically create the probe ftrace_ops for the trace_array") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Naveen N. Rao authored
commit 5b0022dd upstream. In register_ftrace_function_probe(), we are not checking the return value of alloc_and_copy_ftrace_hash(). The subsequent call to ftrace_match_records() may end up dereferencing the same. Add a check to ensure this doesn't happen. Link: http://lkml.kernel.org/r/26e92574f25ad23e7cafa3cf5f7a819de1832cbe.1562249521.git.naveen.n.rao@linux.vnet.ibm.com Cc: stable@vger.kernel.org Fixes: 1ec3a81a ("ftrace: Have each function probe use its own ftrace_ops") Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
-
