- 05 Dec, 2017 28 commits
-
-
Noralf Trønnes authored
Replace driver's code with the generic helpers that do the same thing. Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@freescale.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
Stefan Agner <stefan@agner.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171114212517.23536-5-noralf@tronnes.org
-
Jernej Skrabec authored
Now that we have all required bits, add support for YUV formats. DRM subsystem doesn't know YUV411 semi-planar format, so leave that out for now. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-27-jernej.skrabec@siol.net
-
Jernej Skrabec authored
Basic principle of operation when using YUV framebuffer is that chroma planes have to be upscaled to same size as luma. Because of that, expand DE2 scaler library to support that. BSP driver uses another set of FIR filter coefficients for YUV planes. Signed-off-by:
-
Jernej Skrabec authored
This commit expands translation of DRM YUV format to HW specific information. It doesn't do any functional changes. Signed-off-by:
-
Jernej Skrabec authored
DE2 have many CSC units - channel input CSC, channel output CSC and mixer output CSC and maybe more. Fortunately, they have all same register layout, only base offsets differs. Add support only for channel output CSC for now. Signed-off-by:
-
Jernej Skrabec authored
Base addresses of channel output CSC (CCSC) depends whether mixer in question is first or second and if it is second, if supports VEP or not. This new property will tell which set of base addresses to take. Signed-off-by:
-
Jernej Skrabec authored
Scaling is currently supported only for RGB framebuffers Coefficients and algorithm which coefficients to select are taken from BSP driver. Signed-off-by:
-
Jernej Skrabec authored
No all SoCs support scaling on all channels. For example, V3s support scaling only on VI channels. Because of that, add additional configuration bitmask which tells which channel support scaler. Signed-off-by:
-
Jernej Skrabec authored
This commit adds basic support for VI planes. They are meant for video overlay and because of that they support YUV formats too. However, using YUV format is not straightforward, so only RGB formats are supported for now. Signed-off-by:
-
Jernej Skrabec authored
Till now, DE2 driver supported only UI planes. Before we add support for VI planes, lets split out UI layer specific code from common parts. This commit does the following: - renames sun8i_layer.c to sun8i_ui_layer.c - moves UI channel specific code to sun8i_ui_layer.c - moves common code from sun8i_layer.c to sun8i_mixer.c - renames function and structure names so it is apparent where they belong to No functional change is made. Signed-off-by:
-
Jernej Skrabec authored
Currently only a few RGB formats are supported by the DE2 driver. Add support for all formats supported by the HW. Signed-off-by:
-
Jernej Skrabec authored
Support for multiple UI planes can now be easily enabled just by adding more planes with different index. For now, add immutable zpos property. Signed-off-by:
-
Jernej Skrabec authored
There is no point having code which sets interlace mode of mixer in channel related function. Interlace mode will only change when CRTC state will change, so let's move it to the block which is executed only when primary plane state is changed. Signed-off-by:
-
Jernej Skrabec authored
Channel size should be set every time plane is changed, not only when primary plane changes. Current code works only because only one (primary) plane is supported at the moment. Signed-off-by:
-
Jernej Skrabec authored
Line width is a property of a framebuffer and it belongs to sun8i_mixer_update_layer_buffer(). This will became even more obvious when support for multi-plane formats will be added. Signed-off-by:
-
Jernej Skrabec authored
Now that we have properly clipped coordinates in plane state structure, use them. This also fixes bug where source x and y were adjusted for negative value, but width and height weren't. It wasn't discovered because primary plane usually doesn't have negative coordinates. Signed-off-by:
-
Jernej Skrabec authored
Since current DE2 driver doesn't know how to scale yet, add atomic check function which checks that. Nice side effect of that function is that populates clipped coordinates and checks visibility of the plane. That data will be used in the future. Signed-off-by:
-
Jernej Skrabec authored
Till now, plane selection was hardcoded to first overlay in first UI channel and layer parameter is unused. Rename and add parameters to layer functions so they would represent HW more accurately and start using then. It turns out that overlays don't fit well in current DRM design, because they can't be blended together or scaled independetly when they are set to same channel. Because of that, always use only first overlay in each channel. Signed-off-by:
-
Jernej Skrabec authored
If we want to support multiple planes in the future, code which enables pipe has to be moved to appropriate place and it must depend on channel id instead of being hardcoded. Side effect of that rework is definition of default Z position. For now, put first channel at the bottom, second above it and so on. Signed-off-by:
-
Jernej Skrabec authored
Now that some knowledge of DE2 is gained, rename or add some macros to make code more readable. Max channel macro is removed, since it is not used and it is not clear if it has right value. Structures in BSP driver shows possibility of 5 channels maximum although there is no SoC with such configuration. Signed-off-by:
-
Jernej Skrabec authored
BSP driver always sets blend mode for all channels, no matter if they are really used or not. Do the same here. The exact meaning of the value is not exactly known, but BSP driver mentions "SRC OVER" and by digging through code some more info can be found. Signed-off-by:
-
Jernej Skrabec authored
Color attribute have same format troughout the whole driver. Rename macro, add comment with simple explanation and remove redundant definitions. Signed-off-by:
-
Jernej Skrabec authored
Premultiply and color key control registers are already set to zero by initialization code few lines above. Furthermore, it seems that colorkeying doesn't really work. It's not used in BSP driver and experiments with it all failed. Just remove the code. Signed-off-by:
-
Jernej Skrabec authored
Debug message would print "Enabling" even when disabling plane. Fix it. Fixes: 9d75b8c0 (drm/sun4i: add support for Allwinner DE2 mixers) Signed-off-by:
-
Jernej Skrabec authored
Current code sets alpha mode to global alpha mode and global alpha value to 0xff which is totaly opaque. That is not needed for two reasons: - only one plane is active and thus it can be blended only with background, which is black, - it will hinder proper blending when more than one plane is supported Default mode (0) considers pixel alpha value or 0xff if pixel has no alpha information. Global alpha value is ignored in this case. Because of that, just remove the code. Signed-off-by:
-
Jernej Skrabec authored
Current RGB formats macros are actually not specific to UI planes. Rename it to something more universal and introduce shift macro. Signed-off-by:
-
Jernej Skrabec authored
Format mask is one bit too short. Fix it. Fixes: 9d75b8c0 (drm/sun4i: add support for Allwinner DE2 mixers) Signed-off-by:
-
Hans de Goede authored
Add a comment to the DRM_PANEL_ORIENTATION_QUIRKS documenting that the reason for a separate Kconfig for this is because drm_panel_orientation_quirks.c code is shared with fbdev. Suggested-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171204223321.15799-1-hdegoede@redhat.com
-
- 04 Dec, 2017 10 commits
-
-
Hans de Goede authored
This is now all handled in the drivers and communicated through fb_info.fbcon_rotate_hint. Acked-by:
-
Hans de Goede authored
On some hardware the LCD panel is not mounted upright in the casing, but rotated by 90 degrees. In this case we want the console to automatically be rotated to compensate. The drm subsys has a quirk table for this, use the drm_get_panel_orientation_quirk function to get the panel orientation and set info->fbcon_rotate_hint based on this, so that the fbcon console on top of efifb gets automatically rotated to compensate for the panel orientation. Acked-by:
-
Hans de Goede authored
Ideally we could use the VBT for this, that would be simple, in intel_dsi_init() check dev_priv->vbt.dsi.config->rotation, set connector->display_info.panel_orientation accordingly and call drm_connector_init_panel_orientation_property(), done. Unfortunately vbt.dsi.config->rotation is always 0 even on tablets with an upside down LCD and where the GOP is properly rotating the EFI fb in hardware. So instead we end up reading the rotation from the primary plane. This commit only implements the panel orientation property for DSI panels on BYT / CHT hardware, as all known non normal oriented panels sofar are only found on this hardware. Changes in v2: -Read back the rotation applied by the GOP from the primary plane instead of relying on dev_priv->vbt.dsi.config->rotation, because it seems that the VBT rotation filed is always 0 even on devices where the GOP does apply a rotation Changes in v3: -Rewrite the code to read back the orientation from the primary plane to contain all of this in intel_dsi.c instead of poking a bunch of holes between all the different layers Changes in v6: -Move hardware readout to intel_dsi_init() Reviewed-by:
-
Hans de Goede authored
Apply the "panel orientation" drm connector prop to the primary plane so that fbcon and fbdev using userspace programs display the right way up. Changes in v3: -Use a rotation member in struct drm_fb_helper_crtc and set that from drm_setup_crtcs instead of looping over all crtc's to find the right one later -Since we now no longer look at rotation quirks directly in the fbcon code, set fb_info.fbcon_rotate_hint when the panel is not mounted upright and we cannot use hardware rotation Changes in v4: -Make drm_fb_helper_init() init drm_fb_helper_crtc.rotation to DRM_MODE_ROTATE_0 for all crtcs, so that we do not end up setting the plane_state's rotation to an invalid value for disabled crtcs (caught by Fi.CI) Changes in v5: -Only use hardware (crtc primary plane) rotation for DRM_ROTATE_180, 90 / 270 degree rotation requires special handling which we lack atm -Add a TODO comment for 90 / 270 degree hardware rotation -Add some comments to better document the default case when mapping sw_rotations to fbcon_rotate_hints Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=94894Reviewed-by:
-
Hans de Goede authored
On some devices the LCD panel is mounted in the casing in such a way that the up/top side of the panel does not match with the top side of the device (e.g. it is mounted upside-down). This commit adds the necessary infra for lcd-panel drm_connector-s to have a "panel orientation" property to communicate how the panel is orientated vs the casing. Userspace can use this property to check for non-normal orientation and then adjust the displayed image accordingly by rotating it to compensate. Changes in v2: -Store panel_orientation in drm_display_info, so that drm_fb_helper.c can access it easily -Have a single drm_connector_init_panel_orientation_property rather then create and attach functions. The caller is expected to set drm_display_info.panel_orientation before calling this, then this will check for platform specific quirks overriding the panel_orientation and if the panel_orientation is set after this then it will attach the property. Changes in v6: -Use an enum (with kerneldoc) rather then #defines for DRM_MODE_PANEL_ORIENTATION_* Reviewed-by:
-
Hans de Goede authored
Some x86 clamshell design devices use portrait tablet screens and a display engine which cannot rotate in hardware, so the firmware just leaves things as is and we cannot figure out that the display is oriented non upright from the hardware. So at least on x86, we need a quirk table for this. This commit adds a DMI based quirk table which is initially populated with 5 such devices: Asus T100HA, GPD Pocket, GPD win, I.T.Works TW891 and the VIOS LTH17. This quirk table will be used by the drm code to let userspace know that the display is not mounted upright inside the devices case through a new panel orientation drm-connector property, as well as to tell fbcon to rotate the console so that it shows the right way up. Changes in v5: -Add a kernel-doc comment documenting drm_get_panel_orientation_quirk() -Remove board_* matches from the dmi-matches for the VIOS LTH17 laptop, keeping only the (identical) sys_vendor and product_name matches. This is necessary because an older version of the bios has board_vendor set to VOIS instead of VIOS Changes in v6: -Add reference to added kernel-docs in Documentation/gpu/drm-kms-helpers.rst Reviewed-by:
-
Hans de Goede authored
On some hardware the LCD panel is not mounted upright in the casing, but upside-down or rotated 90 degrees. In this case we want the console to automatically be rotated to compensate. The fbdev-driver may know about the need to rotate. Add a new fbcon_rotate_hint field to struct fb_info, which gets initialized to -1. If the fbdev-driver knows that some sort of rotation is necessary then it can set this field to a FB_ROTATE_* value to tell the fbcon console driver to rotate the console. Acked-by:
-
Gustavo Padovan authored
We need to pull 66660d4c (drm: add connector info/property for non-desktop displays [v2]) into drm-misc-next to continue the development of the display rotation series. Effectively this also pulls 4.15-r2 into drm-misc-next. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.com>
-
Lucas Stach authored
Dma-bufs should already be device coherent, as they are only pulled in the CPU domain via the begin/end cpu_access calls. As we cache the mapping set up by dma_map_sg a CPU sync at this point will not actually guarantee proper coherency on non-coherent architectures, so we can as well stop pretending. This is an important performance fix for architectures which need explicit cache synchronization and userspace doing lots of dma-buf imports. Improves Weston on Etnaviv performance 5x, where before this patch > 90% of Weston CPU time was spent synchronizing caches for buffers which are already device coherent. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-next-2017-11-17-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next More change sets for 4.16: - Many improvements for selftests and other igt tests (Chris) - Forcewake with PUNIT->PMIC bus fixes and robustness (Hans) - Define an engine class for uABI (Tvrtko) - Context switch fixes and improvements (Chris) - GT powersavings and power gating simplification and fixes (Chris) - Other general driver clean-ups (Chris, Lucas, Ville) - Removing old, useless and/or bad workarounds (Chris, Oscar, Radhakrishna) - IPS, pipe config, etc in preparation for another Fast Boot attempt (Maarten) - OA perf fixes and support to Coffee Lake and Cannonlake (Lionel) - Fixes around GPU fault registers (Michel) - GEM Proxy (Tina) - Refactor of Geminilake and Cannonlake plane color handling (James) - Generalize transcoder loop (Mika Kahola) - New HW Workaround for Cannonlake and Geminilake (Rodrigo) - Resume GuC before using GEM (Chris) - Stolen Memory handling improvements (Ville) - Initialize entry in PPAT for older compilers (Chris) - Other fixes and robustness improvements on execbuf (Chris) - Improve logs of GEM_BUG_ON (Mika Kuoppala) - Rework with massive rename of GuC functions and files (Sagar) - Don't sanitize frame start delay if pipe is off (Ville) - Cannonlake clock fixes (Rodrigo) - Cannonlake HDMI 2.0 support (Rodrigo) - Add a GuC doorbells selftest (Michel) - Add might_sleep() check to our wait_for() (Chris) Many GVT changes for 4.16: - CSB HWSP update support (Weinan) - GVT debug helpers, dyndbg and debugfs (Chuanxiao, Shuo) - full virtualized opregion (Xiaolin) - VM health check for sane fallback (Fred) - workload submission code refactor for future enabling (Zhi) - Updated repo URL in MAINTAINERS (Zhenyu) - other many misc fixes * tag 'drm-intel-next-2017-11-17-1' of git://anongit.freedesktop.org/drm/drm-intel: (260 commits) drm/i915: Update DRIVER_DATE to 20171117 drm/i915: Add a policy note for removing workarounds drm/i915/selftests: Report ENOMEM clearly for an allocation failure Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk" drm/i915: Calculate g4x intermediate watermarks correctly drm/i915: Calculate vlv/chv intermediate watermarks correctly, v3. drm/i915: Pass crtc_state to ips toggle functions, v2 drm/i915: Pass idle crtc_state to intel_dp_sink_crc drm/i915: Enable FIFO underrun reporting after initial fastset, v4. drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIM drm/i915: Add might_sleep() check to wait_for() drm/i915/selftests: Add a GuC doorbells selftest drm/i915/cnl: Extend HDMI 2.0 support to CNL. drm/i915/cnl: Simplify dco_fraction calculation. drm/i915/cnl: Don't blindly replace qdiv. drm/i915/cnl: Fix wrpll math for higher freqs. drm/i915/cnl: Fix, simplify and unify wrpll variable sizes. drm/i915/cnl: Remove useless conversion. drm/i915/cnl: Remove spurious central_freq. drm/i915/selftests: exercise_ggtt may have nothing to do ...
-
- 03 Dec, 2017 2 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Cross-subsystem Changes: - device tree doc for the Mitsubishi AA070MC01 and Tianma TM070RVHG71 panels (Lukasz Majewski) and for a 2nd endpoint on stm32 (Philippe Cornu) Core Changes: The most important changes are: - Add drm_driver .last_close and .output_poll_changed helpers to reduce fbdev emulation footprint in drivers (Noralf) - Fix plane clipping in core and for vmwgfx (Ville) Then we have a bunch of of improvement for print and debug such as the addition of a framebuffer debugfs file. ELD connector, HDMI and improvements. And a bunch of misc improvements, clean ups and style changes and doc updates [airlied: drop eld bits from amdgpu_dm] Driver Changes: - sii8620: filter unsupported modes and add DVI mode support (Maciej Purski) - rockchip: analogix_dp: Remove unnecessary init code (Jeffy Chen) - virtio, cirrus: add fb create_handle support to enable screenshots(Lepton Wu) - virtio: replace reference/unreference with get/put (Aastha Gupta) - vc4, gma500: Convert timers to use timer_setup() (Kees Cook) - vc4: Reject HDMI modes with too high of clocks (Eric) - vc4: Add support for more pixel formats (Dave Stevenson) - stm: dsi: Rename driver name to "stm32-display-dsi" (Philippe Cornu) - stm: ltdc: add a 2nd endpoint (Philippe Cornu) - via: use monotonic time for VIA_WAIT_IRQ (Arnd Bergmann) * tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: (96 commits) drm/bridge: tc358767: add copyright lines MAINTAINERS: change maintainer for Rockchip drm drivers drm/vblank: Fix vblank timestamp debugs drm/via: use monotonic time for VIA_WAIT_IRQ dma-buf: Fix ifnullfree.cocci warnings drm/printer: Add drm_vprintf() drm/edid: Allow HDMI infoframe without VIC or S3D video/hdmi: Allow "empty" HDMI infoframes dma-buf/fence: Fix lock inversion within dma-fence-array drm/sti: Handle return value of platform_get_irq_byname drm/vc4: Add support for NV21 and NV61. drm/vc4: Use .pixel_order instead of custom .flip_cbcr drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state() drm/vmwgfx: Try to fix plane clipping drm/vmwgfx: Use drm_plane_helper_check_state() drm/vmwgfx: Remove bogus crtc coords vs fb size check gpu: gma500: remove unneeded DRIVER_LICENSE #define drm: don't link DP aux i2c adapter to the hardware device node ...
-
Linus Torvalds authored
-
