- 15 Jul, 2023 21 commits
-
-
Konrad Dybcio authored
Currently, we're setting the aggregated-on-provider bandwidth on each node, individually. That is of course incorrect and results in far too high votes. Use the correct values to ensure we're not wasting power. Fixes: 30c8fa3e ("interconnect: qcom: Add MSM8916 interconnect provider driver") Reported-by:
Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by:
Georgi Djakov <djakov@kernel.org> Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-21-09c78c175546@linaro.orgSigned-off-by:
Bjorn Andersson <andersson@kernel.org>
-
Konrad Dybcio authored
Up until now, for some reason we've only been setting bandwidth values on the active-only context. That pretty much meant that RPM could lift all votes when entering sleep mode. Or never sleep at all. That in turn could potentially break things like USB wakeup, as the connection between APSS and SNoC/PNoC would simply be dead. Set the values appropriately. Fixes: 30c8fa3e ("interconnect: qcom: Add MSM8916 interconnect provider driver") Reviewed-by:
-
Konrad Dybcio authored
SMD RPM only provides two buckets, one each for the active-only and active-sleep RPM contexts. Use the correct constant to allocate and operate on them. This will make the qcom,icc.h header no longer work with this driver, mostly because.. it was never meant to! The commit that introduced bucket support to SMD RPM was trying to shove a square into a round hole and it did not work out very well. That said, there are no active users of SMD RPM ICC + qcom,icc.h, so that doesn't hurt. Fixes: dcbce7b0 ("interconnect: qcom: icc-rpm: Support multiple buckets") Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
-
Konrad Dybcio authored
The interconnect bus clocks are now handled within the ICC framework. They still however need to get a kickstart *before* we call clk_smd_rpm_enable_scaling(), or RPM will assume that they should all be running at 0 kHz and the system will inevitably die. Separate them out to ensure such a kickstart can still take place. As a happy accident, the file got smaller: Total: Before=41951, After=41555, chg -0.94% Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Acked-by:
-
Konrad Dybcio authored
The sole purpose of bus clocks that were previously registered with rpmcc was to convey the aggregated bandwidth to RPM. There's no good reason to keep them outside the interconnect framework, as it only adds to the plentiful complexity. Add the required code to handle these clocks from within SMD RPM ICC. RPM-owned bus clocks are no longer considered a thing, but sadly we have to allow for the existence of HLOS-owned bus clocks, as some (mostly older) SoCs (ab)use these for bus scaling (e.g. MSM8998 and &mmcc AHB_CLK_SRC). This in turn is trivially solved with a single *clk, which is filled and used iff qp.bus_clk_desc is absent and we have a "bus" clock-names entry in the DT node. This change should(tm) be fully compatible with all sorts of old Device Trees as far as the interconnect functionality goes (modulo abusing bus clock handles or wrongly using the qcom,icc.h binding, but that's a mistake in and of itself). Reviewed-by:
-
Konrad Dybcio authored
Assign the necessary definitions to migrate to the new bus clock handling mechanism. Reviewed-by:
-
Konrad Dybcio authored
Assign the necessary definitions to migrate to the new bus clock handling mechanism. Reviewed-by:
-
Konrad Dybcio authored
Assign the necessary definitions to migrate to the new bus clock handling mechanism. Reviewed-by:
-
Konrad Dybcio authored
Assign the necessary definitions to migrate to the new bus clock handling mechanism. Reviewed-by:
-
Konrad Dybcio authored
Assign the necessary definitions to migrate to the new bus clock handling mechanism. Signed-off-by:
-
Konrad Dybcio authored
Assign the necessary definitions to migrate to the new bus clock handling mechanism. Reviewed-by:
-
Konrad Dybcio authored
Add the definitions for RPM bus clocks that will be used by many different platforms. Reviewed-by:
-
Konrad Dybcio authored
Introduce qcom_icc_rpm_set_bus_rate() in preparation for handling RPM clock resources within the interconnect framework. This lets us greatly simplify all of the code handling, as setting the rate comes down to: u32 rate_khz = max(clk.sleep_rate, clk.active_rate, clk_a.active_rate) write_to_rpm(clock.description, rate_khz); Reviewed-by:
-
Konrad Dybcio authored
smd-rpm.h is not very useful as-is and both files are always included anyway.. Combine them. Reviewed-by:
-
Konrad Dybcio authored
Currently the header does not provide all the required dependencies. Fix it. Signed-off-by:
-
Konrad Dybcio authored
The downstream kernel employs the concept of "keeping the bus alive" by voting for the minimum (XO/19.2MHz) rate at all times on certain (well, most) buses. This is a very important thing to have, as if we either have a lackluster/wrong DT that doesn't specify a (high enough) vote on a certain bus, we may lose access to the entire bus altogether. This is very apparent when we only start introducing interconnect support on a given platform and haven't yet introduced voting on all peripherals. The same can happen if we only have a single driver casting a vote on a certain bus and that driver exits/crashes/suspends. The keepalive vote is limited to the ACTIVE bucket, as keeping a permanent vote on the SLEEP one could prevent the platform from properly entering low power mode states. Introduce the very same concept, with a slight twist: the vendor kernel checks whether the rate is zero before setting the minimum vote, but that's rather silly, as in doing so we're at the mercy of CCF. Instead, explicitly clamp the rates to always be >= 19.2 MHz for providers with keep_alive=true. Reviewed-by:
-
Stephan Gerhold authored
icc_smd_rpm will do bus clock votes itself rather than taking the unnecessary detour through the clock subsystem. However, it can only do that after the clocks have been handed off and scaling has been enabled in the RPM in clk-smd-rpm. Move the icc_smd_rpm registration from smd-rpm.c to clk-smd-rpm.c to avoid any possible races. icc_smd_rpm gets the driver data from the smd-rpm device, so still register the platform device on the smd-rpm parent device. Signed-off-by:
-
Konrad Dybcio authored
In preparation for handling the bus clocks in the icc driver, carve out some defines and a struct definition to the common rpm header. Reviewed-by:
-
Konrad Dybcio authored
Use tabs for defines to make things spaced consistently. Signed-off-by:
-
Konrad Dybcio authored
Add a preprocessor define to indicate the number of RPM contexts/states. Signed-off-by:
-
Konrad Dybcio authored
The SMD RPM interconnect driver requires different icc tags to the RPMh driver. Add bindings to reflect that. Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
- 09 Jul, 2023 10 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
We just sorted the entries and fields last release, so just out of a perverse sense of curiosity, I decided to see if we can keep things ordered for even just one release. The answer is "No. No we cannot". I suggest that all kernel developers will need weekly training sessions, involving a lot of Big Bird and Sesame Street. And at the yearly maintainer summit, we will all sing the alphabet song together. I doubt I will keep doing this. At some point "perverse sense of curiosity" turns into just a cold dark place filled with sadness and despair. Repeats: 80e62bc8 ("MAINTAINERS: re-sort all entries and fields") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: - swiotlb area sizing fixes (Petr Tesarik) * tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: reduce the number of areas to match actual memory pool size swiotlb: always set the number of areas before allocating the pool
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq update from Borislav Petkov: - Optimize IRQ domain's name assignment * tag 'irq_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Use return value of strreplace()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fpu fix from Borislav Petkov: - Do FPU AP initialization on Xen PV too which got missed by the recent boot reordering work * tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/xen: Fix secondary processors' FPU initialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "A single fix for the mechanism to park CPUs with an INIT IPI. On shutdown or kexec, the kernel tries to park the non-boot CPUs with an INIT IPI. But the same code path is also used by the crash utility. If the CPU which panics is not the boot CPU then it sends an INIT IPI to the boot CPU which resets the machine. Prevent this by validating that the CPU which runs the stop mechanism is the boot CPU. If not, leave the other CPUs in HLT" * tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Don't send INIT to boot CPU
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Thomas Bogendoerfer: - fixes for KVM - fix for loongson build and cpu probing - DT fixes * tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled MIPS: dts: add missing space before { MIPS: Loongson: Fix build error when make modules_install MIPS: KVM: Fix NULL pointer dereference MIPS: Loongson: Fix cpu_probe_loongson() again
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fix from Darrick Wong: "Nothing exciting here, just getting rid of a gcc warning that I got tired of seeing when I turn on gcov" * tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix uninit warning in xfs_growfs_data
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more smb client updates from Steve French: - fix potential use after free in unmount - minor cleanup - add worker to cleanup stale directory leases * tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Add a laundromat thread for cached directories smb: client: remove redundant pointer 'server' cifs: fix session state transition to avoid use-after-free issue
-
https://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "Fixes for pci_clean_master, error handling in driver inits, and various other issues/bugs" * tag 'ntb-6.5' of https://github.com/jonmason/ntb: ntb: hw: amd: Fix debugfs_create_dir error checking ntb.rst: Fix copy and paste error ntb_netdev: Fix module_init problem ntb: intel: Remove redundant pci_clear_master ntb: epf: Remove redundant pci_clear_master ntb_hw_amd: Remove redundant pci_clear_master ntb: idt: drop redundant pci_enable_pcie_error_reporting() MAINTAINERS: git://github -> https://github.com for jonmason NTB: EPF: fix possible memory leak in pci_vntb_probe() NTB: ntb_tool: Add check for devm_kcalloc NTB: ntb_transport: fix possible memory leak while device_register() fails ntb: intel: Fix error handling in intel_ntb_pci_driver_init() NTB: amd: Fix error handling in amd_ntb_pci_driver_init() ntb: idt: Fix error handling in idt_pci_driver_init()
-
- 08 Jul, 2023 9 commits
-
-
Hugh Dickins authored
Lockdep is certainly right to complain about (&vma->vm_lock->lock){++++}-{3:3}, at: vma_start_write+0x2d/0x3f but task is already holding lock: (&mapping->i_mmap_rwsem){+.+.}-{3:3}, at: mmap_region+0x4dc/0x6db Invert those to the usual ordering. Fixes: 33313a74 ("mm: lock newly mapped VMA which can be modified after it becomes visible") Cc: stable@vger.kernel.org Signed-off-by:Hugh Dickins <hughd@google.com> Tested-by:
Suren Baghdasaryan <surenb@google.com> Signed-off-by:
-
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "16 hotfixes. Six are cc:stable and the remainder address post-6.4 issues" The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since it was all hopefully fixed in mainline. * tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: lib: dhry: fix sleeping allocations inside non-preemptable section kasan, slub: fix HW_TAGS zeroing with slub_debug kasan: fix type cast in memory_is_poisoned_n mailmap: add entries for Heiko Stuebner mailmap: update manpage link bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page MAINTAINERS: add linux-next info mailmap: add Markus Schneider-Pargmann writeback: account the number of pages written back mm: call arch_swap_restore() from do_swap_page() squashfs: fix cache race with migration mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison docs: update ocfs2-devel mailing list address MAINTAINERS: update ocfs2-devel mailing list address mm: disable CONFIG_PER_VMA_LOCK until its fixed fork: lock VMAs of the parent process when forking
-
Suren Baghdasaryan authored
When forking a child process, the parent write-protects anonymous pages and COW-shares them with the child being forked using copy_present_pte(). We must not take any concurrent page faults on the source vma's as they are being processed, as we expect both the vma and the pte's behind it to be stable. For example, the anon_vma_fork() expects the parents vma->anon_vma to not change during the vma copy. A concurrent page fault on a page newly marked read-only by the page copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the source vma, defeating the anon_vma_clone() that wasn't done because the parent vma originally didn't have an anon_vma, but we now might end up copying a pte entry for a page that has one. Before the per-vma lock based changes, the mmap_lock guaranteed exclusion with concurrent page faults. But now we need to do a vma_start_write() to make sure no concurrent faults happen on this vma while it is being processed. This fix can potentially regress some fork-heavy workloads. Kernel build time did not show noticeable regression on a 56-core machine while a stress test mapping 10000 VMAs and forking 5000 times in a tight loop shows ~5% regression. If such fork time regression is unacceptable, disabling CONFIG_PER_VMA_LOCK should restore its performance. Further optimizations are possible if this regression proves to be problematic. Suggested-by:
David Hildenbrand <david@redhat.com> Reported-by:
Jiri Slaby <jirislaby@kernel.org> Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/Reported-by:
Holger Hoffstätte <holger@applied-asynchrony.com> Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/Reported-by:
Jacob Young <jacobly.alt@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624 Fixes: 0bff0aae ("x86/mm: try VMA lock-based page fault handling first") Cc: stable@vger.kernel.org Signed-off-by:
-
Suren Baghdasaryan authored
mmap_region adds a newly created VMA into VMA tree and might modify it afterwards before dropping the mmap_lock. This poses a problem for page faults handled under per-VMA locks because they don't take the mmap_lock and can stumble on this VMA while it's still being modified. Currently this does not pose a problem since post-addition modifications are done only for file-backed VMAs, which are not handled under per-VMA lock. However, once support for handling file-backed page faults with per-VMA locks is added, this will become a race. Fix this by write-locking the VMA before inserting it into the VMA tree. Other places where a new VMA is added into VMA tree do not modify it after the insertion, so do not need the same locking. Cc: stable@vger.kernel.org Signed-off-by:
-
Suren Baghdasaryan authored
With recent changes necessitating mmap_lock to be held for write while expanding a stack, per-VMA locks should follow the same rules and be write-locked to prevent page faults into the VMA being expanded. Add the necessary locking. Cc: stable@vger.kernel.org Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "A few late arriving patches that missed the initial pull request. It's mostly bug fixes (the dt-bindings is a fix for the initial pull)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Remove unused function declaration scsi: target: docs: Remove tcm_mod_builder.py scsi: target: iblock: Quiet bool conversion warning with pr_preempt use scsi: dt-bindings: ufs: qcom: Fix ICE phandle scsi: core: Simplify scsi_cdl_check_cmd() scsi: isci: Fix comment typo scsi: smartpqi: Replace one-element arrays with flexible-array members scsi: target: tcmu: Replace strlcpy() with strscpy() scsi: ncr53c8xx: Replace strlcpy() with strscpy() scsi: lpfc: Fix lpfc_name struct packing
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull more i2c updates from Wolfram Sang: - xiic patch should have been in the original pull but slipped through - mpc patch fixes a build regression - nomadik cleanup * tag 'i2c-for-6.5-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mpc: Drop unused variable i2c: nomadik: Remove a useless call in the remove function i2c: xiic: Don't try to handle more interrupt events after error
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull hardening fixes from Kees Cook: - Check for NULL bdev in LoadPin (Matthias Kaehlcke) - Revert unwanted KUnit FORTIFY build default - Fix 1-element array causing boot warnings with xhci-hub * tag 'hardening-v6.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: usb: ch9: Replace bmSublinkSpeedAttr 1-element array with flexible array Revert "fortify: Allow KUnit test to build without FORTIFY" dm: verity-loadpin: Add NULL pointer check for 'bdev' parameter
-
Anup Sharma authored
The debugfs_create_dir function returns ERR_PTR in case of error, and the only correct way to check if an error occurred is 'IS_ERR' inline function. This patch will replace the null-comparison with IS_ERR. Signed-off-by:
Anup Sharma <anupnewsmail@gmail.com> Suggested-by:
Ivan Orlov <ivan.orlov0322@gmail.com> Signed-off-by:
Jon Mason <jdmason@kudzu.us>
-
